mirror of
https://github.com/torvalds/linux.git
synced 2024-12-23 03:11:46 +00:00
28c1b08d2a
Device tree binding information for DA9062 and DA9061 thermal junction temperature monitor. Binding descriptions for the DA9061 and DA9062 thermal TJUNC supervisor device driver, using a single THERMAL_TRIP_HOT trip-wire and allowing for a configurable polling period for over-temperature polling. This patch also adds two examples, one for DA9062 and one for DA9061. The DA9061 example uses a fall-back compatible string for the DA9062. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Steve Twiss <stwiss.opensource@diasemi.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
37 lines
992 B
Plaintext
37 lines
992 B
Plaintext
* Dialog DA9062/61 TJUNC Thermal Module
|
|
|
|
This module is part of the DA9061/DA9062. For more details about entire
|
|
DA9062 and DA9061 chips see Documentation/devicetree/bindings/mfd/da9062.txt
|
|
|
|
Junction temperature thermal module uses an interrupt signal to identify
|
|
high THERMAL_TRIP_HOT temperatures for the PMIC device.
|
|
|
|
Required properties:
|
|
|
|
- compatible: should be one of the following valid compatible string lines:
|
|
"dlg,da9061-thermal", "dlg,da9062-thermal"
|
|
"dlg,da9062-thermal"
|
|
|
|
Optional properties:
|
|
|
|
- polling-delay-passive : Specify the polling period, measured in
|
|
milliseconds, between thermal zone device update checks.
|
|
|
|
Example: DA9062
|
|
|
|
pmic0: da9062@58 {
|
|
thermal {
|
|
compatible = "dlg,da9062-thermal";
|
|
polling-delay-passive = <3000>;
|
|
};
|
|
};
|
|
|
|
Example: DA9061 using a fall-back compatible for the DA9062 onkey driver
|
|
|
|
pmic0: da9061@58 {
|
|
thermal {
|
|
compatible = "dlg,da9061-thermal", "dlg,da9062-thermal";
|
|
polling-delay-passive = <3000>;
|
|
};
|
|
};
|