mirror of
https://github.com/torvalds/linux.git
synced 2024-12-11 21:52:04 +00:00
7438273fa2
modprobe -r lpfc produces the following: Call Trace: __blk_mq_run_hw_queue+0xa2/0xb0 __blk_mq_delay_run_hw_queue+0x9d/0xb0 ? blk_mq_hctx_has_pending+0x32/0x80 blk_mq_run_hw_queue+0x50/0xd0 blk_mq_sched_insert_request+0x110/0x1b0 blk_execute_rq_nowait+0x76/0x180 nvme_keep_alive_work+0x8a/0xd0 [nvme_core] process_one_work+0x17f/0x440 worker_thread+0x126/0x3c0 ? manage_workers.isra.24+0x2a0/0x2a0 kthread+0xd1/0xe0 ? insert_kthread_work+0x40/0x40 ret_from_fork_nospec_begin+0x21/0x21 ? insert_kthread_work+0x40/0x40 However, rmmod lpfc would run correctly. When an nvme remoteport is unregistered with the host nvme transport, it needs to set the remoteport->dev_loss_tmo value 0 to indicate an immediate termination of device loss and prevent any further keep alives to that rport. The driver was never setting dev_loss_tmo causing the nvme transport to continue to send the keep alive. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2998 lines
91 KiB
C
2998 lines
91 KiB
C
/*******************************************************************
|
|
* This file is part of the Emulex Linux Device Driver for *
|
|
* Fibre Channel Host Bus Adapters. *
|
|
* Copyright (C) 2017-2018 Broadcom. All Rights Reserved. The term *
|
|
* “Broadcom” refers to Broadcom Inc. and/or its subsidiaries. *
|
|
* Copyright (C) 2004-2016 Emulex. All rights reserved. *
|
|
* EMULEX and SLI are trademarks of Emulex. *
|
|
* www.broadcom.com *
|
|
* Portions Copyright (C) 2004-2005 Christoph Hellwig *
|
|
* *
|
|
* This program is free software; you can redistribute it and/or *
|
|
* modify it under the terms of version 2 of the GNU General *
|
|
* Public License as published by the Free Software Foundation. *
|
|
* This program is distributed in the hope that it will be useful. *
|
|
* ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND *
|
|
* WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, *
|
|
* FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE *
|
|
* DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
|
|
* TO BE LEGALLY INVALID. See the GNU General Public License for *
|
|
* more details, a copy of which can be found in the file COPYING *
|
|
* included with this package. *
|
|
********************************************************************/
|
|
#include <linux/pci.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/delay.h>
|
|
#include <asm/unaligned.h>
|
|
#include <linux/crc-t10dif.h>
|
|
#include <net/checksum.h>
|
|
|
|
#include <scsi/scsi.h>
|
|
#include <scsi/scsi_device.h>
|
|
#include <scsi/scsi_eh.h>
|
|
#include <scsi/scsi_host.h>
|
|
#include <scsi/scsi_tcq.h>
|
|
#include <scsi/scsi_transport_fc.h>
|
|
#include <scsi/fc/fc_fs.h>
|
|
|
|
#include <linux/nvme.h>
|
|
#include <linux/nvme-fc-driver.h>
|
|
#include <linux/nvme-fc.h>
|
|
#include "lpfc_version.h"
|
|
#include "lpfc_hw4.h"
|
|
#include "lpfc_hw.h"
|
|
#include "lpfc_sli.h"
|
|
#include "lpfc_sli4.h"
|
|
#include "lpfc_nl.h"
|
|
#include "lpfc_disc.h"
|
|
#include "lpfc.h"
|
|
#include "lpfc_nvme.h"
|
|
#include "lpfc_scsi.h"
|
|
#include "lpfc_logmsg.h"
|
|
#include "lpfc_crtn.h"
|
|
#include "lpfc_vport.h"
|
|
#include "lpfc_debugfs.h"
|
|
|
|
/* NVME initiator-based functions */
|
|
|
|
static struct lpfc_nvme_buf *
|
|
lpfc_get_nvme_buf(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp,
|
|
int expedite);
|
|
|
|
static void
|
|
lpfc_release_nvme_buf(struct lpfc_hba *, struct lpfc_nvme_buf *);
|
|
|
|
static struct nvme_fc_port_template lpfc_nvme_template;
|
|
|
|
static union lpfc_wqe128 lpfc_iread_cmd_template;
|
|
static union lpfc_wqe128 lpfc_iwrite_cmd_template;
|
|
static union lpfc_wqe128 lpfc_icmnd_cmd_template;
|
|
|
|
/* Setup WQE templates for NVME IOs */
|
|
void
|
|
lpfc_nvme_cmd_template(void)
|
|
{
|
|
union lpfc_wqe128 *wqe;
|
|
|
|
/* IREAD template */
|
|
wqe = &lpfc_iread_cmd_template;
|
|
memset(wqe, 0, sizeof(union lpfc_wqe128));
|
|
|
|
/* Word 0, 1, 2 - BDE is variable */
|
|
|
|
/* Word 3 - cmd_buff_len, payload_offset_len is zero */
|
|
|
|
/* Word 4 - total_xfer_len is variable */
|
|
|
|
/* Word 5 - is zero */
|
|
|
|
/* Word 6 - ctxt_tag, xri_tag is variable */
|
|
|
|
/* Word 7 */
|
|
bf_set(wqe_cmnd, &wqe->fcp_iread.wqe_com, CMD_FCP_IREAD64_WQE);
|
|
bf_set(wqe_pu, &wqe->fcp_iread.wqe_com, PARM_READ_CHECK);
|
|
bf_set(wqe_class, &wqe->fcp_iread.wqe_com, CLASS3);
|
|
bf_set(wqe_ct, &wqe->fcp_iread.wqe_com, SLI4_CT_RPI);
|
|
|
|
/* Word 8 - abort_tag is variable */
|
|
|
|
/* Word 9 - reqtag is variable */
|
|
|
|
/* Word 10 - dbde, wqes is variable */
|
|
bf_set(wqe_qosd, &wqe->fcp_iread.wqe_com, 0);
|
|
bf_set(wqe_nvme, &wqe->fcp_iread.wqe_com, 1);
|
|
bf_set(wqe_iod, &wqe->fcp_iread.wqe_com, LPFC_WQE_IOD_READ);
|
|
bf_set(wqe_lenloc, &wqe->fcp_iread.wqe_com, LPFC_WQE_LENLOC_WORD4);
|
|
bf_set(wqe_dbde, &wqe->fcp_iread.wqe_com, 0);
|
|
bf_set(wqe_wqes, &wqe->fcp_iread.wqe_com, 1);
|
|
|
|
/* Word 11 - pbde is variable */
|
|
bf_set(wqe_cmd_type, &wqe->fcp_iread.wqe_com, NVME_READ_CMD);
|
|
bf_set(wqe_cqid, &wqe->fcp_iread.wqe_com, LPFC_WQE_CQ_ID_DEFAULT);
|
|
bf_set(wqe_pbde, &wqe->fcp_iread.wqe_com, 1);
|
|
|
|
/* Word 12 - is zero */
|
|
|
|
/* Word 13, 14, 15 - PBDE is variable */
|
|
|
|
/* IWRITE template */
|
|
wqe = &lpfc_iwrite_cmd_template;
|
|
memset(wqe, 0, sizeof(union lpfc_wqe128));
|
|
|
|
/* Word 0, 1, 2 - BDE is variable */
|
|
|
|
/* Word 3 - cmd_buff_len, payload_offset_len is zero */
|
|
|
|
/* Word 4 - total_xfer_len is variable */
|
|
|
|
/* Word 5 - initial_xfer_len is variable */
|
|
|
|
/* Word 6 - ctxt_tag, xri_tag is variable */
|
|
|
|
/* Word 7 */
|
|
bf_set(wqe_cmnd, &wqe->fcp_iwrite.wqe_com, CMD_FCP_IWRITE64_WQE);
|
|
bf_set(wqe_pu, &wqe->fcp_iwrite.wqe_com, PARM_READ_CHECK);
|
|
bf_set(wqe_class, &wqe->fcp_iwrite.wqe_com, CLASS3);
|
|
bf_set(wqe_ct, &wqe->fcp_iwrite.wqe_com, SLI4_CT_RPI);
|
|
|
|
/* Word 8 - abort_tag is variable */
|
|
|
|
/* Word 9 - reqtag is variable */
|
|
|
|
/* Word 10 - dbde, wqes is variable */
|
|
bf_set(wqe_qosd, &wqe->fcp_iwrite.wqe_com, 0);
|
|
bf_set(wqe_nvme, &wqe->fcp_iwrite.wqe_com, 1);
|
|
bf_set(wqe_iod, &wqe->fcp_iwrite.wqe_com, LPFC_WQE_IOD_WRITE);
|
|
bf_set(wqe_lenloc, &wqe->fcp_iwrite.wqe_com, LPFC_WQE_LENLOC_WORD4);
|
|
bf_set(wqe_dbde, &wqe->fcp_iwrite.wqe_com, 0);
|
|
bf_set(wqe_wqes, &wqe->fcp_iwrite.wqe_com, 1);
|
|
|
|
/* Word 11 - pbde is variable */
|
|
bf_set(wqe_cmd_type, &wqe->fcp_iwrite.wqe_com, NVME_WRITE_CMD);
|
|
bf_set(wqe_cqid, &wqe->fcp_iwrite.wqe_com, LPFC_WQE_CQ_ID_DEFAULT);
|
|
bf_set(wqe_pbde, &wqe->fcp_iwrite.wqe_com, 1);
|
|
|
|
/* Word 12 - is zero */
|
|
|
|
/* Word 13, 14, 15 - PBDE is variable */
|
|
|
|
/* ICMND template */
|
|
wqe = &lpfc_icmnd_cmd_template;
|
|
memset(wqe, 0, sizeof(union lpfc_wqe128));
|
|
|
|
/* Word 0, 1, 2 - BDE is variable */
|
|
|
|
/* Word 3 - payload_offset_len is variable */
|
|
|
|
/* Word 4, 5 - is zero */
|
|
|
|
/* Word 6 - ctxt_tag, xri_tag is variable */
|
|
|
|
/* Word 7 */
|
|
bf_set(wqe_cmnd, &wqe->fcp_icmd.wqe_com, CMD_FCP_ICMND64_WQE);
|
|
bf_set(wqe_pu, &wqe->fcp_icmd.wqe_com, 0);
|
|
bf_set(wqe_class, &wqe->fcp_icmd.wqe_com, CLASS3);
|
|
bf_set(wqe_ct, &wqe->fcp_icmd.wqe_com, SLI4_CT_RPI);
|
|
|
|
/* Word 8 - abort_tag is variable */
|
|
|
|
/* Word 9 - reqtag is variable */
|
|
|
|
/* Word 10 - dbde, wqes is variable */
|
|
bf_set(wqe_qosd, &wqe->fcp_icmd.wqe_com, 1);
|
|
bf_set(wqe_nvme, &wqe->fcp_icmd.wqe_com, 1);
|
|
bf_set(wqe_iod, &wqe->fcp_icmd.wqe_com, LPFC_WQE_IOD_NONE);
|
|
bf_set(wqe_lenloc, &wqe->fcp_icmd.wqe_com, LPFC_WQE_LENLOC_NONE);
|
|
bf_set(wqe_dbde, &wqe->fcp_icmd.wqe_com, 0);
|
|
bf_set(wqe_wqes, &wqe->fcp_icmd.wqe_com, 1);
|
|
|
|
/* Word 11 */
|
|
bf_set(wqe_cmd_type, &wqe->fcp_icmd.wqe_com, FCP_COMMAND);
|
|
bf_set(wqe_cqid, &wqe->fcp_icmd.wqe_com, LPFC_WQE_CQ_ID_DEFAULT);
|
|
bf_set(wqe_pbde, &wqe->fcp_icmd.wqe_com, 0);
|
|
|
|
/* Word 12, 13, 14, 15 - is zero */
|
|
}
|
|
|
|
/**
|
|
* lpfc_nvme_create_queue -
|
|
* @lpfc_pnvme: Pointer to the driver's nvme instance data
|
|
* @qidx: An cpu index used to affinitize IO queues and MSIX vectors.
|
|
* @handle: An opaque driver handle used in follow-up calls.
|
|
*
|
|
* Driver registers this routine to preallocate and initialize any
|
|
* internal data structures to bind the @qidx to its internal IO queues.
|
|
* A hardware queue maps (qidx) to a specific driver MSI-X vector/EQ/CQ/WQ.
|
|
*
|
|
* Return value :
|
|
* 0 - Success
|
|
* -EINVAL - Unsupported input value.
|
|
* -ENOMEM - Could not alloc necessary memory
|
|
**/
|
|
static int
|
|
lpfc_nvme_create_queue(struct nvme_fc_local_port *pnvme_lport,
|
|
unsigned int qidx, u16 qsize,
|
|
void **handle)
|
|
{
|
|
struct lpfc_nvme_lport *lport;
|
|
struct lpfc_vport *vport;
|
|
struct lpfc_nvme_qhandle *qhandle;
|
|
char *str;
|
|
|
|
if (!pnvme_lport->private)
|
|
return -ENOMEM;
|
|
|
|
lport = (struct lpfc_nvme_lport *)pnvme_lport->private;
|
|
vport = lport->vport;
|
|
qhandle = kzalloc(sizeof(struct lpfc_nvme_qhandle), GFP_KERNEL);
|
|
if (qhandle == NULL)
|
|
return -ENOMEM;
|
|
|
|
qhandle->cpu_id = smp_processor_id();
|
|
qhandle->qidx = qidx;
|
|
/*
|
|
* NVME qidx == 0 is the admin queue, so both admin queue
|
|
* and first IO queue will use MSI-X vector and associated
|
|
* EQ/CQ/WQ at index 0. After that they are sequentially assigned.
|
|
*/
|
|
if (qidx) {
|
|
str = "IO "; /* IO queue */
|
|
qhandle->index = ((qidx - 1) %
|
|
vport->phba->cfg_nvme_io_channel);
|
|
} else {
|
|
str = "ADM"; /* Admin queue */
|
|
qhandle->index = qidx;
|
|
}
|
|
|
|
lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME,
|
|
"6073 Binding %s HdwQueue %d (cpu %d) to "
|
|
"io_channel %d qhandle %p\n", str,
|
|
qidx, qhandle->cpu_id, qhandle->index, qhandle);
|
|
*handle = (void *)qhandle;
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* lpfc_nvme_delete_queue -
|
|
* @lpfc_pnvme: Pointer to the driver's nvme instance data
|
|
* @qidx: An cpu index used to affinitize IO queues and MSIX vectors.
|
|
* @handle: An opaque driver handle from lpfc_nvme_create_queue
|
|
*
|
|
* Driver registers this routine to free
|
|
* any internal data structures to bind the @qidx to its internal
|
|
* IO queues.
|
|
*
|
|
* Return value :
|
|
* 0 - Success
|
|
* TODO: What are the failure codes.
|
|
**/
|
|
static void
|
|
lpfc_nvme_delete_queue(struct nvme_fc_local_port *pnvme_lport,
|
|
unsigned int qidx,
|
|
void *handle)
|
|
{
|
|
struct lpfc_nvme_lport *lport;
|
|
struct lpfc_vport *vport;
|
|
|
|
if (!pnvme_lport->private)
|
|
return;
|
|
|
|
lport = (struct lpfc_nvme_lport *)pnvme_lport->private;
|
|
vport = lport->vport;
|
|
|
|
lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME,
|
|
"6001 ENTER. lpfc_pnvme %p, qidx x%xi qhandle %p\n",
|
|
lport, qidx, handle);
|
|
kfree(handle);
|
|
}
|
|
|
|
static void
|
|
lpfc_nvme_localport_delete(struct nvme_fc_local_port *localport)
|
|
{
|
|
struct lpfc_nvme_lport *lport = localport->private;
|
|
|
|
lpfc_printf_vlog(lport->vport, KERN_INFO, LOG_NVME,
|
|
"6173 localport %p delete complete\n",
|
|
lport);
|
|
|
|
/* release any threads waiting for the unreg to complete */
|
|
complete(&lport->lport_unreg_done);
|
|
}
|
|
|
|
/* lpfc_nvme_remoteport_delete
|
|
*
|
|
* @remoteport: Pointer to an nvme transport remoteport instance.
|
|
*
|
|
* This is a template downcall. NVME transport calls this function
|
|
* when it has completed the unregistration of a previously
|
|
* registered remoteport.
|
|
*
|
|
* Return value :
|
|
* None
|
|
*/
|
|
void
|
|
lpfc_nvme_remoteport_delete(struct nvme_fc_remote_port *remoteport)
|
|
{
|
|
struct lpfc_nvme_rport *rport = remoteport->private;
|
|
struct lpfc_vport *vport;
|
|
struct lpfc_nodelist *ndlp;
|
|
|
|
ndlp = rport->ndlp;
|
|
if (!ndlp)
|
|
goto rport_err;
|
|
|
|
vport = ndlp->vport;
|
|
if (!vport)
|
|
goto rport_err;
|
|
|
|
/* Remove this rport from the lport's list - memory is owned by the
|
|
* transport. Remove the ndlp reference for the NVME transport before
|
|
* calling state machine to remove the node.
|
|
*/
|
|
lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME_DISC,
|
|
"6146 remoteport delete of remoteport %p\n",
|
|
remoteport);
|
|
spin_lock_irq(&vport->phba->hbalock);
|
|
|
|
/* The register rebind might have occurred before the delete
|
|
* downcall. Guard against this race.
|
|
*/
|
|
if (ndlp->upcall_flags & NLP_WAIT_FOR_UNREG) {
|
|
ndlp->nrport = NULL;
|
|
ndlp->upcall_flags &= ~NLP_WAIT_FOR_UNREG;
|
|
}
|
|
spin_unlock_irq(&vport->phba->hbalock);
|
|
|
|
/* Remove original register reference. The host transport
|
|
* won't reference this rport/remoteport any further.
|
|
*/
|
|
lpfc_nlp_put(ndlp);
|
|
|
|
rport_err:
|
|
return;
|
|
}
|
|
|
|
static void
|
|
lpfc_nvme_cmpl_gen_req(struct lpfc_hba *phba, struct lpfc_iocbq *cmdwqe,
|
|
struct lpfc_wcqe_complete *wcqe)
|
|
{
|
|
struct lpfc_vport *vport = cmdwqe->vport;
|
|
struct lpfc_nvme_lport *lport;
|
|
uint32_t status;
|
|
struct nvmefc_ls_req *pnvme_lsreq;
|
|
struct lpfc_dmabuf *buf_ptr;
|
|
struct lpfc_nodelist *ndlp;
|
|
|
|
pnvme_lsreq = (struct nvmefc_ls_req *)cmdwqe->context2;
|
|
status = bf_get(lpfc_wcqe_c_status, wcqe) & LPFC_IOCB_STATUS_MASK;
|
|
|
|
if (vport->localport) {
|
|
lport = (struct lpfc_nvme_lport *)vport->localport->private;
|
|
if (lport) {
|
|
atomic_inc(&lport->fc4NvmeLsCmpls);
|
|
if (status) {
|
|
if (bf_get(lpfc_wcqe_c_xb, wcqe))
|
|
atomic_inc(&lport->cmpl_ls_xb);
|
|
atomic_inc(&lport->cmpl_ls_err);
|
|
}
|
|
}
|
|
}
|
|
|
|
ndlp = (struct lpfc_nodelist *)cmdwqe->context1;
|
|
lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME_DISC,
|
|
"6047 nvme cmpl Enter "
|
|
"Data %p DID %x Xri: %x status %x reason x%x cmd:%p "
|
|
"lsreg:%p bmp:%p ndlp:%p\n",
|
|
pnvme_lsreq, ndlp ? ndlp->nlp_DID : 0,
|
|
cmdwqe->sli4_xritag, status,
|
|
(wcqe->parameter & 0xffff),
|
|
cmdwqe, pnvme_lsreq, cmdwqe->context3, ndlp);
|
|
|
|
lpfc_nvmeio_data(phba, "NVME LS CMPL: xri x%x stat x%x parm x%x\n",
|
|
cmdwqe->sli4_xritag, status, wcqe->parameter);
|
|
|
|
if (cmdwqe->context3) {
|
|
buf_ptr = (struct lpfc_dmabuf *)cmdwqe->context3;
|
|
lpfc_mbuf_free(phba, buf_ptr->virt, buf_ptr->phys);
|
|
kfree(buf_ptr);
|
|
cmdwqe->context3 = NULL;
|
|
}
|
|
if (pnvme_lsreq->done)
|
|
pnvme_lsreq->done(pnvme_lsreq, status);
|
|
else
|
|
lpfc_printf_vlog(vport, KERN_ERR, LOG_NVME_DISC,
|
|
"6046 nvme cmpl without done call back? "
|
|
"Data %p DID %x Xri: %x status %x\n",
|
|
pnvme_lsreq, ndlp ? ndlp->nlp_DID : 0,
|
|
cmdwqe->sli4_xritag, status);
|
|
if (ndlp) {
|
|
lpfc_nlp_put(ndlp);
|
|
cmdwqe->context1 = NULL;
|
|
}
|
|
lpfc_sli_release_iocbq(phba, cmdwqe);
|
|
}
|
|
|
|
static int
|
|
lpfc_nvme_gen_req(struct lpfc_vport *vport, struct lpfc_dmabuf *bmp,
|
|
struct lpfc_dmabuf *inp,
|
|
struct nvmefc_ls_req *pnvme_lsreq,
|
|
void (*cmpl)(struct lpfc_hba *, struct lpfc_iocbq *,
|
|
struct lpfc_wcqe_complete *),
|
|
struct lpfc_nodelist *ndlp, uint32_t num_entry,
|
|
uint32_t tmo, uint8_t retry)
|
|
{
|
|
struct lpfc_hba *phba = vport->phba;
|
|
union lpfc_wqe128 *wqe;
|
|
struct lpfc_iocbq *genwqe;
|
|
struct ulp_bde64 *bpl;
|
|
struct ulp_bde64 bde;
|
|
int i, rc, xmit_len, first_len;
|
|
|
|
/* Allocate buffer for command WQE */
|
|
genwqe = lpfc_sli_get_iocbq(phba);
|
|
if (genwqe == NULL)
|
|
return 1;
|
|
|
|
wqe = &genwqe->wqe;
|
|
memset(wqe, 0, sizeof(union lpfc_wqe));
|
|
|
|
genwqe->context3 = (uint8_t *)bmp;
|
|
genwqe->iocb_flag |= LPFC_IO_NVME_LS;
|
|
|
|
/* Save for completion so we can release these resources */
|
|
genwqe->context1 = lpfc_nlp_get(ndlp);
|
|
genwqe->context2 = (uint8_t *)pnvme_lsreq;
|
|
/* Fill in payload, bp points to frame payload */
|
|
|
|
if (!tmo)
|
|
/* FC spec states we need 3 * ratov for CT requests */
|
|
tmo = (3 * phba->fc_ratov);
|
|
|
|
/* For this command calculate the xmit length of the request bde. */
|
|
xmit_len = 0;
|
|
first_len = 0;
|
|
bpl = (struct ulp_bde64 *)bmp->virt;
|
|
for (i = 0; i < num_entry; i++) {
|
|
bde.tus.w = bpl[i].tus.w;
|
|
if (bde.tus.f.bdeFlags != BUFF_TYPE_BDE_64)
|
|
break;
|
|
xmit_len += bde.tus.f.bdeSize;
|
|
if (i == 0)
|
|
first_len = xmit_len;
|
|
}
|
|
|
|
genwqe->rsvd2 = num_entry;
|
|
genwqe->hba_wqidx = 0;
|
|
|
|
/* Words 0 - 2 */
|
|
wqe->generic.bde.tus.f.bdeFlags = BUFF_TYPE_BDE_64;
|
|
wqe->generic.bde.tus.f.bdeSize = first_len;
|
|
wqe->generic.bde.addrLow = bpl[0].addrLow;
|
|
wqe->generic.bde.addrHigh = bpl[0].addrHigh;
|
|
|
|
/* Word 3 */
|
|
wqe->gen_req.request_payload_len = first_len;
|
|
|
|
/* Word 4 */
|
|
|
|
/* Word 5 */
|
|
bf_set(wqe_dfctl, &wqe->gen_req.wge_ctl, 0);
|
|
bf_set(wqe_si, &wqe->gen_req.wge_ctl, 1);
|
|
bf_set(wqe_la, &wqe->gen_req.wge_ctl, 1);
|
|
bf_set(wqe_rctl, &wqe->gen_req.wge_ctl, FC_RCTL_ELS4_REQ);
|
|
bf_set(wqe_type, &wqe->gen_req.wge_ctl, FC_TYPE_NVME);
|
|
|
|
/* Word 6 */
|
|
bf_set(wqe_ctxt_tag, &wqe->gen_req.wqe_com,
|
|
phba->sli4_hba.rpi_ids[ndlp->nlp_rpi]);
|
|
bf_set(wqe_xri_tag, &wqe->gen_req.wqe_com, genwqe->sli4_xritag);
|
|
|
|
/* Word 7 */
|
|
bf_set(wqe_tmo, &wqe->gen_req.wqe_com, (vport->phba->fc_ratov-1));
|
|
bf_set(wqe_class, &wqe->gen_req.wqe_com, CLASS3);
|
|
bf_set(wqe_cmnd, &wqe->gen_req.wqe_com, CMD_GEN_REQUEST64_WQE);
|
|
bf_set(wqe_ct, &wqe->gen_req.wqe_com, SLI4_CT_RPI);
|
|
|
|
/* Word 8 */
|
|
wqe->gen_req.wqe_com.abort_tag = genwqe->iotag;
|
|
|
|
/* Word 9 */
|
|
bf_set(wqe_reqtag, &wqe->gen_req.wqe_com, genwqe->iotag);
|
|
|
|
/* Word 10 */
|
|
bf_set(wqe_dbde, &wqe->gen_req.wqe_com, 1);
|
|
bf_set(wqe_iod, &wqe->gen_req.wqe_com, LPFC_WQE_IOD_READ);
|
|
bf_set(wqe_qosd, &wqe->gen_req.wqe_com, 1);
|
|
bf_set(wqe_lenloc, &wqe->gen_req.wqe_com, LPFC_WQE_LENLOC_NONE);
|
|
bf_set(wqe_ebde_cnt, &wqe->gen_req.wqe_com, 0);
|
|
|
|
/* Word 11 */
|
|
bf_set(wqe_cqid, &wqe->gen_req.wqe_com, LPFC_WQE_CQ_ID_DEFAULT);
|
|
bf_set(wqe_cmd_type, &wqe->gen_req.wqe_com, OTHER_COMMAND);
|
|
|
|
|
|
/* Issue GEN REQ WQE for NPORT <did> */
|
|
lpfc_printf_vlog(vport, KERN_INFO, LOG_ELS,
|
|
"6050 Issue GEN REQ WQE to NPORT x%x "
|
|
"Data: x%x x%x wq:%p lsreq:%p bmp:%p xmit:%d 1st:%d\n",
|
|
ndlp->nlp_DID, genwqe->iotag,
|
|
vport->port_state,
|
|
genwqe, pnvme_lsreq, bmp, xmit_len, first_len);
|
|
genwqe->wqe_cmpl = cmpl;
|
|
genwqe->iocb_cmpl = NULL;
|
|
genwqe->drvrTimeout = tmo + LPFC_DRVR_TIMEOUT;
|
|
genwqe->vport = vport;
|
|
genwqe->retry = retry;
|
|
|
|
lpfc_nvmeio_data(phba, "NVME LS XMIT: xri x%x iotag x%x to x%06x\n",
|
|
genwqe->sli4_xritag, genwqe->iotag, ndlp->nlp_DID);
|
|
|
|
rc = lpfc_sli4_issue_wqe(phba, LPFC_ELS_RING, genwqe);
|
|
if (rc) {
|
|
lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS,
|
|
"6045 Issue GEN REQ WQE to NPORT x%x "
|
|
"Data: x%x x%x\n",
|
|
ndlp->nlp_DID, genwqe->iotag,
|
|
vport->port_state);
|
|
lpfc_sli_release_iocbq(phba, genwqe);
|
|
return 1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* lpfc_nvme_ls_req - Issue an Link Service request
|
|
* @lpfc_pnvme: Pointer to the driver's nvme instance data
|
|
* @lpfc_nvme_lport: Pointer to the driver's local port data
|
|
* @lpfc_nvme_rport: Pointer to the rport getting the @lpfc_nvme_ereq
|
|
*
|
|
* Driver registers this routine to handle any link service request
|
|
* from the nvme_fc transport to a remote nvme-aware port.
|
|
*
|
|
* Return value :
|
|
* 0 - Success
|
|
* TODO: What are the failure codes.
|
|
**/
|
|
static int
|
|
lpfc_nvme_ls_req(struct nvme_fc_local_port *pnvme_lport,
|
|
struct nvme_fc_remote_port *pnvme_rport,
|
|
struct nvmefc_ls_req *pnvme_lsreq)
|
|
{
|
|
int ret = 0;
|
|
struct lpfc_nvme_lport *lport;
|
|
struct lpfc_nvme_rport *rport;
|
|
struct lpfc_vport *vport;
|
|
struct lpfc_nodelist *ndlp;
|
|
struct ulp_bde64 *bpl;
|
|
struct lpfc_dmabuf *bmp;
|
|
uint16_t ntype, nstate;
|
|
|
|
/* there are two dma buf in the request, actually there is one and
|
|
* the second one is just the start address + cmd size.
|
|
* Before calling lpfc_nvme_gen_req these buffers need to be wrapped
|
|
* in a lpfc_dmabuf struct. When freeing we just free the wrapper
|
|
* because the nvem layer owns the data bufs.
|
|
* We do not have to break these packets open, we don't care what is in
|
|
* them. And we do not have to look at the resonse data, we only care
|
|
* that we got a response. All of the caring is going to happen in the
|
|
* nvme-fc layer.
|
|
*/
|
|
|
|
lport = (struct lpfc_nvme_lport *)pnvme_lport->private;
|
|
rport = (struct lpfc_nvme_rport *)pnvme_rport->private;
|
|
if (unlikely(!lport) || unlikely(!rport))
|
|
return -EINVAL;
|
|
|
|
vport = lport->vport;
|
|
|
|
if (vport->load_flag & FC_UNLOADING)
|
|
return -ENODEV;
|
|
|
|
/* Need the ndlp. It is stored in the driver's rport. */
|
|
ndlp = rport->ndlp;
|
|
if (!ndlp || !NLP_CHK_NODE_ACT(ndlp)) {
|
|
lpfc_printf_vlog(vport, KERN_ERR, LOG_NODE | LOG_NVME_IOERR,
|
|
"6051 Remoteport %p, rport has invalid ndlp. "
|
|
"Failing LS Req\n", pnvme_rport);
|
|
return -ENODEV;
|
|
}
|
|
|
|
/* The remote node has to be a mapped nvme target or an
|
|
* unmapped nvme initiator or it's an error.
|
|
*/
|
|
ntype = ndlp->nlp_type;
|
|
nstate = ndlp->nlp_state;
|
|
if ((ntype & NLP_NVME_TARGET && nstate != NLP_STE_MAPPED_NODE) ||
|
|
(ntype & NLP_NVME_INITIATOR && nstate != NLP_STE_UNMAPPED_NODE)) {
|
|
lpfc_printf_vlog(vport, KERN_ERR, LOG_NODE | LOG_NVME_IOERR,
|
|
"6088 DID x%06x not ready for "
|
|
"IO. State x%x, Type x%x\n",
|
|
pnvme_rport->port_id,
|
|
ndlp->nlp_state, ndlp->nlp_type);
|
|
return -ENODEV;
|
|
}
|
|
bmp = kmalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL);
|
|
if (!bmp) {
|
|
|
|
lpfc_printf_vlog(vport, KERN_ERR, LOG_NVME_DISC,
|
|
"6044 Could not find node for DID %x\n",
|
|
pnvme_rport->port_id);
|
|
return 2;
|
|
}
|
|
INIT_LIST_HEAD(&bmp->list);
|
|
bmp->virt = lpfc_mbuf_alloc(vport->phba, MEM_PRI, &(bmp->phys));
|
|
if (!bmp->virt) {
|
|
lpfc_printf_vlog(vport, KERN_ERR, LOG_NVME_DISC,
|
|
"6042 Could not find node for DID %x\n",
|
|
pnvme_rport->port_id);
|
|
kfree(bmp);
|
|
return 3;
|
|
}
|
|
bpl = (struct ulp_bde64 *)bmp->virt;
|
|
bpl->addrHigh = le32_to_cpu(putPaddrHigh(pnvme_lsreq->rqstdma));
|
|
bpl->addrLow = le32_to_cpu(putPaddrLow(pnvme_lsreq->rqstdma));
|
|
bpl->tus.f.bdeFlags = 0;
|
|
bpl->tus.f.bdeSize = pnvme_lsreq->rqstlen;
|
|
bpl->tus.w = le32_to_cpu(bpl->tus.w);
|
|
bpl++;
|
|
|
|
bpl->addrHigh = le32_to_cpu(putPaddrHigh(pnvme_lsreq->rspdma));
|
|
bpl->addrLow = le32_to_cpu(putPaddrLow(pnvme_lsreq->rspdma));
|
|
bpl->tus.f.bdeFlags = BUFF_TYPE_BDE_64I;
|
|
bpl->tus.f.bdeSize = pnvme_lsreq->rsplen;
|
|
bpl->tus.w = le32_to_cpu(bpl->tus.w);
|
|
|
|
/* Expand print to include key fields. */
|
|
lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME_DISC,
|
|
"6149 Issue LS Req to DID 0x%06x lport %p, rport %p "
|
|
"lsreq%p rqstlen:%d rsplen:%d %pad %pad\n",
|
|
ndlp->nlp_DID,
|
|
pnvme_lport, pnvme_rport,
|
|
pnvme_lsreq, pnvme_lsreq->rqstlen,
|
|
pnvme_lsreq->rsplen, &pnvme_lsreq->rqstdma,
|
|
&pnvme_lsreq->rspdma);
|
|
|
|
atomic_inc(&lport->fc4NvmeLsRequests);
|
|
|
|
/* Hardcode the wait to 30 seconds. Connections are failing otherwise.
|
|
* This code allows it all to work.
|
|
*/
|
|
ret = lpfc_nvme_gen_req(vport, bmp, pnvme_lsreq->rqstaddr,
|
|
pnvme_lsreq, lpfc_nvme_cmpl_gen_req,
|
|
ndlp, 2, 30, 0);
|
|
if (ret != WQE_SUCCESS) {
|
|
atomic_inc(&lport->xmt_ls_err);
|
|
lpfc_printf_vlog(vport, KERN_ERR, LOG_NVME_DISC,
|
|
"6052 EXIT. issue ls wqe failed lport %p, "
|
|
"rport %p lsreq%p Status %x DID %x\n",
|
|
pnvme_lport, pnvme_rport, pnvme_lsreq,
|
|
ret, ndlp->nlp_DID);
|
|
lpfc_mbuf_free(vport->phba, bmp->virt, bmp->phys);
|
|
kfree(bmp);
|
|
return ret;
|
|
}
|
|
|
|
/* Stub in routine and return 0 for now. */
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* lpfc_nvme_ls_abort - Issue an Link Service request
|
|
* @lpfc_pnvme: Pointer to the driver's nvme instance data
|
|
* @lpfc_nvme_lport: Pointer to the driver's local port data
|
|
* @lpfc_nvme_rport: Pointer to the rport getting the @lpfc_nvme_ereq
|
|
*
|
|
* Driver registers this routine to handle any link service request
|
|
* from the nvme_fc transport to a remote nvme-aware port.
|
|
*
|
|
* Return value :
|
|
* 0 - Success
|
|
* TODO: What are the failure codes.
|
|
**/
|
|
static void
|
|
lpfc_nvme_ls_abort(struct nvme_fc_local_port *pnvme_lport,
|
|
struct nvme_fc_remote_port *pnvme_rport,
|
|
struct nvmefc_ls_req *pnvme_lsreq)
|
|
{
|
|
struct lpfc_nvme_lport *lport;
|
|
struct lpfc_vport *vport;
|
|
struct lpfc_hba *phba;
|
|
struct lpfc_nodelist *ndlp;
|
|
LIST_HEAD(abort_list);
|
|
struct lpfc_sli_ring *pring;
|
|
struct lpfc_iocbq *wqe, *next_wqe;
|
|
|
|
lport = (struct lpfc_nvme_lport *)pnvme_lport->private;
|
|
if (unlikely(!lport))
|
|
return;
|
|
vport = lport->vport;
|
|
phba = vport->phba;
|
|
|
|
if (vport->load_flag & FC_UNLOADING)
|
|
return;
|
|
|
|
ndlp = lpfc_findnode_did(vport, pnvme_rport->port_id);
|
|
if (!ndlp) {
|
|
lpfc_printf_vlog(vport, KERN_ERR, LOG_NVME_ABTS,
|
|
"6049 Could not find node for DID %x\n",
|
|
pnvme_rport->port_id);
|
|
return;
|
|
}
|
|
|
|
/* Expand print to include key fields. */
|
|
lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME_ABTS,
|
|
"6040 ENTER. lport %p, rport %p lsreq %p rqstlen:%d "
|
|
"rsplen:%d %pad %pad\n",
|
|
pnvme_lport, pnvme_rport,
|
|
pnvme_lsreq, pnvme_lsreq->rqstlen,
|
|
pnvme_lsreq->rsplen, &pnvme_lsreq->rqstdma,
|
|
&pnvme_lsreq->rspdma);
|
|
|
|
/*
|
|
* Lock the ELS ring txcmplq and build a local list of all ELS IOs
|
|
* that need an ABTS. The IOs need to stay on the txcmplq so that
|
|
* the abort operation completes them successfully.
|
|
*/
|
|
pring = phba->sli4_hba.nvmels_wq->pring;
|
|
spin_lock_irq(&phba->hbalock);
|
|
spin_lock(&pring->ring_lock);
|
|
list_for_each_entry_safe(wqe, next_wqe, &pring->txcmplq, list) {
|
|
/* Add to abort_list on on NDLP match. */
|
|
if (lpfc_check_sli_ndlp(phba, pring, wqe, ndlp)) {
|
|
wqe->iocb_flag |= LPFC_DRIVER_ABORTED;
|
|
list_add_tail(&wqe->dlist, &abort_list);
|
|
}
|
|
}
|
|
spin_unlock(&pring->ring_lock);
|
|
spin_unlock_irq(&phba->hbalock);
|
|
|
|
/* Abort the targeted IOs and remove them from the abort list. */
|
|
list_for_each_entry_safe(wqe, next_wqe, &abort_list, dlist) {
|
|
atomic_inc(&lport->xmt_ls_abort);
|
|
spin_lock_irq(&phba->hbalock);
|
|
list_del_init(&wqe->dlist);
|
|
lpfc_sli_issue_abort_iotag(phba, pring, wqe);
|
|
spin_unlock_irq(&phba->hbalock);
|
|
}
|
|
}
|
|
|
|
/* Fix up the existing sgls for NVME IO. */
|
|
static inline void
|
|
lpfc_nvme_adj_fcp_sgls(struct lpfc_vport *vport,
|
|
struct lpfc_nvme_buf *lpfc_ncmd,
|
|
struct nvmefc_fcp_req *nCmd)
|
|
{
|
|
struct lpfc_hba *phba = vport->phba;
|
|
struct sli4_sge *sgl;
|
|
union lpfc_wqe128 *wqe;
|
|
uint32_t *wptr, *dptr;
|
|
|
|
/*
|
|
* Get a local pointer to the built-in wqe and correct
|
|
* the cmd size to match NVME's 96 bytes and fix
|
|
* the dma address.
|
|
*/
|
|
|
|
wqe = &lpfc_ncmd->cur_iocbq.wqe;
|
|
|
|
/*
|
|
* Adjust the FCP_CMD and FCP_RSP DMA data and sge_len to
|
|
* match NVME. NVME sends 96 bytes. Also, use the
|
|
* nvme commands command and response dma addresses
|
|
* rather than the virtual memory to ease the restore
|
|
* operation.
|
|
*/
|
|
sgl = lpfc_ncmd->nvme_sgl;
|
|
sgl->sge_len = cpu_to_le32(nCmd->cmdlen);
|
|
if (phba->cfg_nvme_embed_cmd) {
|
|
sgl->addr_hi = 0;
|
|
sgl->addr_lo = 0;
|
|
|
|
/* Word 0-2 - NVME CMND IU (embedded payload) */
|
|
wqe->generic.bde.tus.f.bdeFlags = BUFF_TYPE_BDE_IMMED;
|
|
wqe->generic.bde.tus.f.bdeSize = 56;
|
|
wqe->generic.bde.addrHigh = 0;
|
|
wqe->generic.bde.addrLow = 64; /* Word 16 */
|
|
|
|
/* Word 10 - dbde is 0, wqes is 1 in template */
|
|
|
|
/*
|
|
* Embed the payload in the last half of the WQE
|
|
* WQE words 16-30 get the NVME CMD IU payload
|
|
*
|
|
* WQE words 16-19 get payload Words 1-4
|
|
* WQE words 20-21 get payload Words 6-7
|
|
* WQE words 22-29 get payload Words 16-23
|
|
*/
|
|
wptr = &wqe->words[16]; /* WQE ptr */
|
|
dptr = (uint32_t *)nCmd->cmdaddr; /* payload ptr */
|
|
dptr++; /* Skip Word 0 in payload */
|
|
|
|
*wptr++ = *dptr++; /* Word 1 */
|
|
*wptr++ = *dptr++; /* Word 2 */
|
|
*wptr++ = *dptr++; /* Word 3 */
|
|
*wptr++ = *dptr++; /* Word 4 */
|
|
dptr++; /* Skip Word 5 in payload */
|
|
*wptr++ = *dptr++; /* Word 6 */
|
|
*wptr++ = *dptr++; /* Word 7 */
|
|
dptr += 8; /* Skip Words 8-15 in payload */
|
|
*wptr++ = *dptr++; /* Word 16 */
|
|
*wptr++ = *dptr++; /* Word 17 */
|
|
*wptr++ = *dptr++; /* Word 18 */
|
|
*wptr++ = *dptr++; /* Word 19 */
|
|
*wptr++ = *dptr++; /* Word 20 */
|
|
*wptr++ = *dptr++; /* Word 21 */
|
|
*wptr++ = *dptr++; /* Word 22 */
|
|
*wptr = *dptr; /* Word 23 */
|
|
} else {
|
|
sgl->addr_hi = cpu_to_le32(putPaddrHigh(nCmd->cmddma));
|
|
sgl->addr_lo = cpu_to_le32(putPaddrLow(nCmd->cmddma));
|
|
|
|
/* Word 0-2 - NVME CMND IU Inline BDE */
|
|
wqe->generic.bde.tus.f.bdeFlags = BUFF_TYPE_BDE_64;
|
|
wqe->generic.bde.tus.f.bdeSize = nCmd->cmdlen;
|
|
wqe->generic.bde.addrHigh = sgl->addr_hi;
|
|
wqe->generic.bde.addrLow = sgl->addr_lo;
|
|
|
|
/* Word 10 */
|
|
bf_set(wqe_dbde, &wqe->generic.wqe_com, 1);
|
|
bf_set(wqe_wqes, &wqe->generic.wqe_com, 0);
|
|
}
|
|
|
|
sgl++;
|
|
|
|
/* Setup the physical region for the FCP RSP */
|
|
sgl->addr_hi = cpu_to_le32(putPaddrHigh(nCmd->rspdma));
|
|
sgl->addr_lo = cpu_to_le32(putPaddrLow(nCmd->rspdma));
|
|
sgl->word2 = le32_to_cpu(sgl->word2);
|
|
if (nCmd->sg_cnt)
|
|
bf_set(lpfc_sli4_sge_last, sgl, 0);
|
|
else
|
|
bf_set(lpfc_sli4_sge_last, sgl, 1);
|
|
sgl->word2 = cpu_to_le32(sgl->word2);
|
|
sgl->sge_len = cpu_to_le32(nCmd->rsplen);
|
|
}
|
|
|
|
#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
|
|
static void
|
|
lpfc_nvme_ktime(struct lpfc_hba *phba,
|
|
struct lpfc_nvme_buf *lpfc_ncmd)
|
|
{
|
|
uint64_t seg1, seg2, seg3, seg4;
|
|
uint64_t segsum;
|
|
|
|
if (!lpfc_ncmd->ts_last_cmd ||
|
|
!lpfc_ncmd->ts_cmd_start ||
|
|
!lpfc_ncmd->ts_cmd_wqput ||
|
|
!lpfc_ncmd->ts_isr_cmpl ||
|
|
!lpfc_ncmd->ts_data_nvme)
|
|
return;
|
|
|
|
if (lpfc_ncmd->ts_data_nvme < lpfc_ncmd->ts_cmd_start)
|
|
return;
|
|
if (lpfc_ncmd->ts_cmd_start < lpfc_ncmd->ts_last_cmd)
|
|
return;
|
|
if (lpfc_ncmd->ts_cmd_wqput < lpfc_ncmd->ts_cmd_start)
|
|
return;
|
|
if (lpfc_ncmd->ts_isr_cmpl < lpfc_ncmd->ts_cmd_wqput)
|
|
return;
|
|
if (lpfc_ncmd->ts_data_nvme < lpfc_ncmd->ts_isr_cmpl)
|
|
return;
|
|
/*
|
|
* Segment 1 - Time from Last FCP command cmpl is handed
|
|
* off to NVME Layer to start of next command.
|
|
* Segment 2 - Time from Driver receives a IO cmd start
|
|
* from NVME Layer to WQ put is done on IO cmd.
|
|
* Segment 3 - Time from Driver WQ put is done on IO cmd
|
|
* to MSI-X ISR for IO cmpl.
|
|
* Segment 4 - Time from MSI-X ISR for IO cmpl to when
|
|
* cmpl is handled off to the NVME Layer.
|
|
*/
|
|
seg1 = lpfc_ncmd->ts_cmd_start - lpfc_ncmd->ts_last_cmd;
|
|
if (seg1 > 5000000) /* 5 ms - for sequential IOs only */
|
|
seg1 = 0;
|
|
|
|
/* Calculate times relative to start of IO */
|
|
seg2 = (lpfc_ncmd->ts_cmd_wqput - lpfc_ncmd->ts_cmd_start);
|
|
segsum = seg2;
|
|
seg3 = lpfc_ncmd->ts_isr_cmpl - lpfc_ncmd->ts_cmd_start;
|
|
if (segsum > seg3)
|
|
return;
|
|
seg3 -= segsum;
|
|
segsum += seg3;
|
|
|
|
seg4 = lpfc_ncmd->ts_data_nvme - lpfc_ncmd->ts_cmd_start;
|
|
if (segsum > seg4)
|
|
return;
|
|
seg4 -= segsum;
|
|
|
|
phba->ktime_data_samples++;
|
|
phba->ktime_seg1_total += seg1;
|
|
if (seg1 < phba->ktime_seg1_min)
|
|
phba->ktime_seg1_min = seg1;
|
|
else if (seg1 > phba->ktime_seg1_max)
|
|
phba->ktime_seg1_max = seg1;
|
|
phba->ktime_seg2_total += seg2;
|
|
if (seg2 < phba->ktime_seg2_min)
|
|
phba->ktime_seg2_min = seg2;
|
|
else if (seg2 > phba->ktime_seg2_max)
|
|
phba->ktime_seg2_max = seg2;
|
|
phba->ktime_seg3_total += seg3;
|
|
if (seg3 < phba->ktime_seg3_min)
|
|
phba->ktime_seg3_min = seg3;
|
|
else if (seg3 > phba->ktime_seg3_max)
|
|
phba->ktime_seg3_max = seg3;
|
|
phba->ktime_seg4_total += seg4;
|
|
if (seg4 < phba->ktime_seg4_min)
|
|
phba->ktime_seg4_min = seg4;
|
|
else if (seg4 > phba->ktime_seg4_max)
|
|
phba->ktime_seg4_max = seg4;
|
|
|
|
lpfc_ncmd->ts_last_cmd = 0;
|
|
lpfc_ncmd->ts_cmd_start = 0;
|
|
lpfc_ncmd->ts_cmd_wqput = 0;
|
|
lpfc_ncmd->ts_isr_cmpl = 0;
|
|
lpfc_ncmd->ts_data_nvme = 0;
|
|
}
|
|
#endif
|
|
|
|
/**
|
|
* lpfc_nvme_io_cmd_wqe_cmpl - Complete an NVME-over-FCP IO
|
|
* @lpfc_pnvme: Pointer to the driver's nvme instance data
|
|
* @lpfc_nvme_lport: Pointer to the driver's local port data
|
|
* @lpfc_nvme_rport: Pointer to the rport getting the @lpfc_nvme_ereq
|
|
*
|
|
* Driver registers this routine as it io request handler. This
|
|
* routine issues an fcp WQE with data from the @lpfc_nvme_fcpreq
|
|
* data structure to the rport indicated in @lpfc_nvme_rport.
|
|
*
|
|
* Return value :
|
|
* 0 - Success
|
|
* TODO: What are the failure codes.
|
|
**/
|
|
static void
|
|
lpfc_nvme_io_cmd_wqe_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pwqeIn,
|
|
struct lpfc_wcqe_complete *wcqe)
|
|
{
|
|
struct lpfc_nvme_buf *lpfc_ncmd =
|
|
(struct lpfc_nvme_buf *)pwqeIn->context1;
|
|
struct lpfc_vport *vport = pwqeIn->vport;
|
|
struct nvmefc_fcp_req *nCmd;
|
|
struct nvme_fc_ersp_iu *ep;
|
|
struct nvme_fc_cmd_iu *cp;
|
|
struct lpfc_nvme_rport *rport;
|
|
struct lpfc_nodelist *ndlp;
|
|
struct lpfc_nvme_fcpreq_priv *freqpriv;
|
|
struct lpfc_nvme_lport *lport;
|
|
struct lpfc_nvme_ctrl_stat *cstat;
|
|
unsigned long flags;
|
|
uint32_t code, status, idx;
|
|
uint16_t cid, sqhd, data;
|
|
uint32_t *ptr;
|
|
|
|
/* Sanity check on return of outstanding command */
|
|
if (!lpfc_ncmd || !lpfc_ncmd->nvmeCmd || !lpfc_ncmd->nrport) {
|
|
if (!lpfc_ncmd) {
|
|
lpfc_printf_vlog(vport, KERN_ERR,
|
|
LOG_NODE | LOG_NVME_IOERR,
|
|
"6071 Null lpfc_ncmd pointer. No "
|
|
"release, skip completion\n");
|
|
return;
|
|
}
|
|
|
|
lpfc_printf_vlog(vport, KERN_ERR, LOG_NODE | LOG_NVME_IOERR,
|
|
"6066 Missing cmpl ptrs: lpfc_ncmd %p, "
|
|
"nvmeCmd %p nrport %p\n",
|
|
lpfc_ncmd, lpfc_ncmd->nvmeCmd,
|
|
lpfc_ncmd->nrport);
|
|
|
|
/* Release the lpfc_ncmd regardless of the missing elements. */
|
|
lpfc_release_nvme_buf(phba, lpfc_ncmd);
|
|
return;
|
|
}
|
|
nCmd = lpfc_ncmd->nvmeCmd;
|
|
rport = lpfc_ncmd->nrport;
|
|
status = bf_get(lpfc_wcqe_c_status, wcqe);
|
|
|
|
if (vport->localport) {
|
|
lport = (struct lpfc_nvme_lport *)vport->localport->private;
|
|
if (lport) {
|
|
idx = lpfc_ncmd->cur_iocbq.hba_wqidx;
|
|
cstat = &lport->cstat[idx];
|
|
atomic_inc(&cstat->fc4NvmeIoCmpls);
|
|
if (status) {
|
|
if (bf_get(lpfc_wcqe_c_xb, wcqe))
|
|
atomic_inc(&lport->cmpl_fcp_xb);
|
|
atomic_inc(&lport->cmpl_fcp_err);
|
|
}
|
|
}
|
|
}
|
|
|
|
lpfc_nvmeio_data(phba, "NVME FCP CMPL: xri x%x stat x%x parm x%x\n",
|
|
lpfc_ncmd->cur_iocbq.sli4_xritag,
|
|
status, wcqe->parameter);
|
|
/*
|
|
* Catch race where our node has transitioned, but the
|
|
* transport is still transitioning.
|
|
*/
|
|
ndlp = rport->ndlp;
|
|
if (!ndlp || !NLP_CHK_NODE_ACT(ndlp)) {
|
|
lpfc_printf_vlog(vport, KERN_ERR, LOG_NODE | LOG_NVME_IOERR,
|
|
"6061 rport %p, DID x%06x node not ready.\n",
|
|
rport, rport->remoteport->port_id);
|
|
|
|
ndlp = lpfc_findnode_did(vport, rport->remoteport->port_id);
|
|
if (!ndlp) {
|
|
lpfc_printf_vlog(vport, KERN_ERR, LOG_NVME_IOERR,
|
|
"6062 Ignoring NVME cmpl. No ndlp\n");
|
|
goto out_err;
|
|
}
|
|
}
|
|
|
|
code = bf_get(lpfc_wcqe_c_code, wcqe);
|
|
if (code == CQE_CODE_NVME_ERSP) {
|
|
/* For this type of CQE, we need to rebuild the rsp */
|
|
ep = (struct nvme_fc_ersp_iu *)nCmd->rspaddr;
|
|
|
|
/*
|
|
* Get Command Id from cmd to plug into response. This
|
|
* code is not needed in the next NVME Transport drop.
|
|
*/
|
|
cp = (struct nvme_fc_cmd_iu *)nCmd->cmdaddr;
|
|
cid = cp->sqe.common.command_id;
|
|
|
|
/*
|
|
* RSN is in CQE word 2
|
|
* SQHD is in CQE Word 3 bits 15:0
|
|
* Cmd Specific info is in CQE Word 1
|
|
* and in CQE Word 0 bits 15:0
|
|
*/
|
|
sqhd = bf_get(lpfc_wcqe_c_sqhead, wcqe);
|
|
|
|
/* Now lets build the NVME ERSP IU */
|
|
ep->iu_len = cpu_to_be16(8);
|
|
ep->rsn = wcqe->parameter;
|
|
ep->xfrd_len = cpu_to_be32(nCmd->payload_length);
|
|
ep->rsvd12 = 0;
|
|
ptr = (uint32_t *)&ep->cqe.result.u64;
|
|
*ptr++ = wcqe->total_data_placed;
|
|
data = bf_get(lpfc_wcqe_c_ersp0, wcqe);
|
|
*ptr = (uint32_t)data;
|
|
ep->cqe.sq_head = sqhd;
|
|
ep->cqe.sq_id = nCmd->sqid;
|
|
ep->cqe.command_id = cid;
|
|
ep->cqe.status = 0;
|
|
|
|
lpfc_ncmd->status = IOSTAT_SUCCESS;
|
|
lpfc_ncmd->result = 0;
|
|
nCmd->rcv_rsplen = LPFC_NVME_ERSP_LEN;
|
|
nCmd->transferred_length = nCmd->payload_length;
|
|
} else {
|
|
lpfc_ncmd->status = (status & LPFC_IOCB_STATUS_MASK);
|
|
lpfc_ncmd->result = (wcqe->parameter & IOERR_PARAM_MASK);
|
|
|
|
/* For NVME, the only failure path that results in an
|
|
* IO error is when the adapter rejects it. All other
|
|
* conditions are a success case and resolved by the
|
|
* transport.
|
|
* IOSTAT_FCP_RSP_ERROR means:
|
|
* 1. Length of data received doesn't match total
|
|
* transfer length in WQE
|
|
* 2. If the RSP payload does NOT match these cases:
|
|
* a. RSP length 12/24 bytes and all zeros
|
|
* b. NVME ERSP
|
|
*/
|
|
switch (lpfc_ncmd->status) {
|
|
case IOSTAT_SUCCESS:
|
|
nCmd->transferred_length = wcqe->total_data_placed;
|
|
nCmd->rcv_rsplen = 0;
|
|
nCmd->status = 0;
|
|
break;
|
|
case IOSTAT_FCP_RSP_ERROR:
|
|
nCmd->transferred_length = wcqe->total_data_placed;
|
|
nCmd->rcv_rsplen = wcqe->parameter;
|
|
nCmd->status = 0;
|
|
/* Sanity check */
|
|
if (nCmd->rcv_rsplen == LPFC_NVME_ERSP_LEN)
|
|
break;
|
|
lpfc_printf_vlog(vport, KERN_ERR, LOG_NVME_IOERR,
|
|
"6081 NVME Completion Protocol Error: "
|
|
"xri %x status x%x result x%x "
|
|
"placed x%x\n",
|
|
lpfc_ncmd->cur_iocbq.sli4_xritag,
|
|
lpfc_ncmd->status, lpfc_ncmd->result,
|
|
wcqe->total_data_placed);
|
|
break;
|
|
case IOSTAT_LOCAL_REJECT:
|
|
/* Let fall through to set command final state. */
|
|
if (lpfc_ncmd->result == IOERR_ABORT_REQUESTED)
|
|
lpfc_printf_vlog(vport, KERN_INFO,
|
|
LOG_NVME_IOERR,
|
|
"6032 Delay Aborted cmd %p "
|
|
"nvme cmd %p, xri x%x, "
|
|
"xb %d\n",
|
|
lpfc_ncmd, nCmd,
|
|
lpfc_ncmd->cur_iocbq.sli4_xritag,
|
|
bf_get(lpfc_wcqe_c_xb, wcqe));
|
|
default:
|
|
out_err:
|
|
lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME_IOERR,
|
|
"6072 NVME Completion Error: xri %x "
|
|
"status x%x result x%x placed x%x\n",
|
|
lpfc_ncmd->cur_iocbq.sli4_xritag,
|
|
lpfc_ncmd->status, lpfc_ncmd->result,
|
|
wcqe->total_data_placed);
|
|
nCmd->transferred_length = 0;
|
|
nCmd->rcv_rsplen = 0;
|
|
nCmd->status = NVME_SC_INTERNAL;
|
|
}
|
|
}
|
|
|
|
/* pick up SLI4 exhange busy condition */
|
|
if (bf_get(lpfc_wcqe_c_xb, wcqe))
|
|
lpfc_ncmd->flags |= LPFC_SBUF_XBUSY;
|
|
else
|
|
lpfc_ncmd->flags &= ~LPFC_SBUF_XBUSY;
|
|
|
|
if (ndlp && NLP_CHK_NODE_ACT(ndlp))
|
|
atomic_dec(&ndlp->cmd_pending);
|
|
|
|
/* Update stats and complete the IO. There is
|
|
* no need for dma unprep because the nvme_transport
|
|
* owns the dma address.
|
|
*/
|
|
#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
|
|
if (lpfc_ncmd->ts_cmd_start) {
|
|
lpfc_ncmd->ts_isr_cmpl = pwqeIn->isr_timestamp;
|
|
lpfc_ncmd->ts_data_nvme = ktime_get_ns();
|
|
phba->ktime_last_cmd = lpfc_ncmd->ts_data_nvme;
|
|
lpfc_nvme_ktime(phba, lpfc_ncmd);
|
|
}
|
|
if (phba->cpucheck_on & LPFC_CHECK_NVME_IO) {
|
|
if (lpfc_ncmd->cpu != smp_processor_id())
|
|
lpfc_printf_vlog(vport, KERN_ERR, LOG_NVME_IOERR,
|
|
"6701 CPU Check cmpl: "
|
|
"cpu %d expect %d\n",
|
|
smp_processor_id(), lpfc_ncmd->cpu);
|
|
if (lpfc_ncmd->cpu < LPFC_CHECK_CPU_CNT)
|
|
phba->cpucheck_cmpl_io[lpfc_ncmd->cpu]++;
|
|
}
|
|
#endif
|
|
|
|
/* NVME targets need completion held off until the abort exchange
|
|
* completes unless the NVME Rport is getting unregistered.
|
|
*/
|
|
|
|
if (!(lpfc_ncmd->flags & LPFC_SBUF_XBUSY)) {
|
|
freqpriv = nCmd->private;
|
|
freqpriv->nvme_buf = NULL;
|
|
nCmd->done(nCmd);
|
|
lpfc_ncmd->nvmeCmd = NULL;
|
|
}
|
|
|
|
spin_lock_irqsave(&phba->hbalock, flags);
|
|
lpfc_ncmd->nrport = NULL;
|
|
spin_unlock_irqrestore(&phba->hbalock, flags);
|
|
|
|
/* Call release with XB=1 to queue the IO into the abort list. */
|
|
lpfc_release_nvme_buf(phba, lpfc_ncmd);
|
|
}
|
|
|
|
|
|
/**
|
|
* lpfc_nvme_prep_io_cmd - Issue an NVME-over-FCP IO
|
|
* @lpfc_pnvme: Pointer to the driver's nvme instance data
|
|
* @lpfc_nvme_lport: Pointer to the driver's local port data
|
|
* @lpfc_nvme_rport: Pointer to the rport getting the @lpfc_nvme_ereq
|
|
* @lpfc_nvme_fcreq: IO request from nvme fc to driver.
|
|
* @hw_queue_handle: Driver-returned handle in lpfc_nvme_create_queue
|
|
*
|
|
* Driver registers this routine as it io request handler. This
|
|
* routine issues an fcp WQE with data from the @lpfc_nvme_fcpreq
|
|
* data structure to the rport indicated in @lpfc_nvme_rport.
|
|
*
|
|
* Return value :
|
|
* 0 - Success
|
|
* TODO: What are the failure codes.
|
|
**/
|
|
static int
|
|
lpfc_nvme_prep_io_cmd(struct lpfc_vport *vport,
|
|
struct lpfc_nvme_buf *lpfc_ncmd,
|
|
struct lpfc_nodelist *pnode,
|
|
struct lpfc_nvme_ctrl_stat *cstat)
|
|
{
|
|
struct lpfc_hba *phba = vport->phba;
|
|
struct nvmefc_fcp_req *nCmd = lpfc_ncmd->nvmeCmd;
|
|
struct lpfc_iocbq *pwqeq = &(lpfc_ncmd->cur_iocbq);
|
|
union lpfc_wqe128 *wqe = &pwqeq->wqe;
|
|
uint32_t req_len;
|
|
|
|
if (!pnode || !NLP_CHK_NODE_ACT(pnode))
|
|
return -EINVAL;
|
|
|
|
/*
|
|
* There are three possibilities here - use scatter-gather segment, use
|
|
* the single mapping, or neither.
|
|
*/
|
|
if (nCmd->sg_cnt) {
|
|
if (nCmd->io_dir == NVMEFC_FCP_WRITE) {
|
|
/* From the iwrite template, initialize words 7 - 11 */
|
|
memcpy(&wqe->words[7],
|
|
&lpfc_iwrite_cmd_template.words[7],
|
|
sizeof(uint32_t) * 5);
|
|
|
|
/* Word 4 */
|
|
wqe->fcp_iwrite.total_xfer_len = nCmd->payload_length;
|
|
|
|
/* Word 5 */
|
|
if ((phba->cfg_nvme_enable_fb) &&
|
|
(pnode->nlp_flag & NLP_FIRSTBURST)) {
|
|
req_len = lpfc_ncmd->nvmeCmd->payload_length;
|
|
if (req_len < pnode->nvme_fb_size)
|
|
wqe->fcp_iwrite.initial_xfer_len =
|
|
req_len;
|
|
else
|
|
wqe->fcp_iwrite.initial_xfer_len =
|
|
pnode->nvme_fb_size;
|
|
} else {
|
|
wqe->fcp_iwrite.initial_xfer_len = 0;
|
|
}
|
|
atomic_inc(&cstat->fc4NvmeOutputRequests);
|
|
} else {
|
|
/* From the iread template, initialize words 7 - 11 */
|
|
memcpy(&wqe->words[7],
|
|
&lpfc_iread_cmd_template.words[7],
|
|
sizeof(uint32_t) * 5);
|
|
|
|
/* Word 4 */
|
|
wqe->fcp_iread.total_xfer_len = nCmd->payload_length;
|
|
|
|
/* Word 5 */
|
|
wqe->fcp_iread.rsrvd5 = 0;
|
|
|
|
atomic_inc(&cstat->fc4NvmeInputRequests);
|
|
}
|
|
} else {
|
|
/* From the icmnd template, initialize words 4 - 11 */
|
|
memcpy(&wqe->words[4], &lpfc_icmnd_cmd_template.words[4],
|
|
sizeof(uint32_t) * 8);
|
|
atomic_inc(&cstat->fc4NvmeControlRequests);
|
|
}
|
|
/*
|
|
* Finish initializing those WQE fields that are independent
|
|
* of the nvme_cmnd request_buffer
|
|
*/
|
|
|
|
/* Word 3 */
|
|
bf_set(payload_offset_len, &wqe->fcp_icmd,
|
|
(nCmd->rsplen + nCmd->cmdlen));
|
|
|
|
/* Word 6 */
|
|
bf_set(wqe_ctxt_tag, &wqe->generic.wqe_com,
|
|
phba->sli4_hba.rpi_ids[pnode->nlp_rpi]);
|
|
bf_set(wqe_xri_tag, &wqe->generic.wqe_com, pwqeq->sli4_xritag);
|
|
|
|
/* Word 8 */
|
|
wqe->generic.wqe_com.abort_tag = pwqeq->iotag;
|
|
|
|
/* Word 9 */
|
|
bf_set(wqe_reqtag, &wqe->generic.wqe_com, pwqeq->iotag);
|
|
|
|
pwqeq->vport = vport;
|
|
return 0;
|
|
}
|
|
|
|
|
|
/**
|
|
* lpfc_nvme_prep_io_dma - Issue an NVME-over-FCP IO
|
|
* @lpfc_pnvme: Pointer to the driver's nvme instance data
|
|
* @lpfc_nvme_lport: Pointer to the driver's local port data
|
|
* @lpfc_nvme_rport: Pointer to the rport getting the @lpfc_nvme_ereq
|
|
* @lpfc_nvme_fcreq: IO request from nvme fc to driver.
|
|
* @hw_queue_handle: Driver-returned handle in lpfc_nvme_create_queue
|
|
*
|
|
* Driver registers this routine as it io request handler. This
|
|
* routine issues an fcp WQE with data from the @lpfc_nvme_fcpreq
|
|
* data structure to the rport indicated in @lpfc_nvme_rport.
|
|
*
|
|
* Return value :
|
|
* 0 - Success
|
|
* TODO: What are the failure codes.
|
|
**/
|
|
static int
|
|
lpfc_nvme_prep_io_dma(struct lpfc_vport *vport,
|
|
struct lpfc_nvme_buf *lpfc_ncmd)
|
|
{
|
|
struct lpfc_hba *phba = vport->phba;
|
|
struct nvmefc_fcp_req *nCmd = lpfc_ncmd->nvmeCmd;
|
|
union lpfc_wqe128 *wqe = &lpfc_ncmd->cur_iocbq.wqe;
|
|
struct sli4_sge *sgl = lpfc_ncmd->nvme_sgl;
|
|
struct scatterlist *data_sg;
|
|
struct sli4_sge *first_data_sgl;
|
|
struct ulp_bde64 *bde;
|
|
dma_addr_t physaddr;
|
|
uint32_t num_bde = 0;
|
|
uint32_t dma_len;
|
|
uint32_t dma_offset = 0;
|
|
int nseg, i;
|
|
|
|
/* Fix up the command and response DMA stuff. */
|
|
lpfc_nvme_adj_fcp_sgls(vport, lpfc_ncmd, nCmd);
|
|
|
|
/*
|
|
* There are three possibilities here - use scatter-gather segment, use
|
|
* the single mapping, or neither.
|
|
*/
|
|
if (nCmd->sg_cnt) {
|
|
/*
|
|
* Jump over the cmd and rsp SGEs. The fix routine
|
|
* has already adjusted for this.
|
|
*/
|
|
sgl += 2;
|
|
|
|
first_data_sgl = sgl;
|
|
lpfc_ncmd->seg_cnt = nCmd->sg_cnt;
|
|
if (lpfc_ncmd->seg_cnt > lpfc_nvme_template.max_sgl_segments) {
|
|
lpfc_printf_log(phba, KERN_ERR, LOG_NVME_IOERR,
|
|
"6058 Too many sg segments from "
|
|
"NVME Transport. Max %d, "
|
|
"nvmeIO sg_cnt %d\n",
|
|
phba->cfg_nvme_seg_cnt + 1,
|
|
lpfc_ncmd->seg_cnt);
|
|
lpfc_ncmd->seg_cnt = 0;
|
|
return 1;
|
|
}
|
|
|
|
/*
|
|
* The driver established a maximum scatter-gather segment count
|
|
* during probe that limits the number of sg elements in any
|
|
* single nvme command. Just run through the seg_cnt and format
|
|
* the sge's.
|
|
*/
|
|
nseg = nCmd->sg_cnt;
|
|
data_sg = nCmd->first_sgl;
|
|
for (i = 0; i < nseg; i++) {
|
|
if (data_sg == NULL) {
|
|
lpfc_printf_log(phba, KERN_ERR, LOG_NVME_IOERR,
|
|
"6059 dptr err %d, nseg %d\n",
|
|
i, nseg);
|
|
lpfc_ncmd->seg_cnt = 0;
|
|
return 1;
|
|
}
|
|
physaddr = data_sg->dma_address;
|
|
dma_len = data_sg->length;
|
|
sgl->addr_lo = cpu_to_le32(putPaddrLow(physaddr));
|
|
sgl->addr_hi = cpu_to_le32(putPaddrHigh(physaddr));
|
|
sgl->word2 = le32_to_cpu(sgl->word2);
|
|
if ((num_bde + 1) == nseg)
|
|
bf_set(lpfc_sli4_sge_last, sgl, 1);
|
|
else
|
|
bf_set(lpfc_sli4_sge_last, sgl, 0);
|
|
bf_set(lpfc_sli4_sge_offset, sgl, dma_offset);
|
|
bf_set(lpfc_sli4_sge_type, sgl, LPFC_SGE_TYPE_DATA);
|
|
sgl->word2 = cpu_to_le32(sgl->word2);
|
|
sgl->sge_len = cpu_to_le32(dma_len);
|
|
|
|
dma_offset += dma_len;
|
|
data_sg = sg_next(data_sg);
|
|
sgl++;
|
|
}
|
|
if (phba->nvme_embed_pbde) {
|
|
/* Use PBDE support for first SGL only, offset == 0 */
|
|
/* Words 13-15 */
|
|
bde = (struct ulp_bde64 *)
|
|
&wqe->words[13];
|
|
bde->addrLow = first_data_sgl->addr_lo;
|
|
bde->addrHigh = first_data_sgl->addr_hi;
|
|
bde->tus.f.bdeSize =
|
|
le32_to_cpu(first_data_sgl->sge_len);
|
|
bde->tus.f.bdeFlags = BUFF_TYPE_BDE_64;
|
|
bde->tus.w = cpu_to_le32(bde->tus.w);
|
|
/* wqe_pbde is 1 in template */
|
|
} else {
|
|
memset(&wqe->words[13], 0, (sizeof(uint32_t) * 3));
|
|
bf_set(wqe_pbde, &wqe->generic.wqe_com, 0);
|
|
}
|
|
} else {
|
|
bf_set(wqe_pbde, &wqe->generic.wqe_com, 0);
|
|
memset(&wqe->words[13], 0, (sizeof(uint32_t) * 3));
|
|
|
|
/* For this clause to be valid, the payload_length
|
|
* and sg_cnt must zero.
|
|
*/
|
|
if (nCmd->payload_length != 0) {
|
|
lpfc_printf_log(phba, KERN_ERR, LOG_NVME_IOERR,
|
|
"6063 NVME DMA Prep Err: sg_cnt %d "
|
|
"payload_length x%x\n",
|
|
nCmd->sg_cnt, nCmd->payload_length);
|
|
return 1;
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* lpfc_nvme_fcp_io_submit - Issue an NVME-over-FCP IO
|
|
* @lpfc_pnvme: Pointer to the driver's nvme instance data
|
|
* @lpfc_nvme_lport: Pointer to the driver's local port data
|
|
* @lpfc_nvme_rport: Pointer to the rport getting the @lpfc_nvme_ereq
|
|
* @lpfc_nvme_fcreq: IO request from nvme fc to driver.
|
|
* @hw_queue_handle: Driver-returned handle in lpfc_nvme_create_queue
|
|
*
|
|
* Driver registers this routine as it io request handler. This
|
|
* routine issues an fcp WQE with data from the @lpfc_nvme_fcpreq
|
|
* data structure to the rport
|
|
indicated in @lpfc_nvme_rport.
|
|
*
|
|
* Return value :
|
|
* 0 - Success
|
|
* TODO: What are the failure codes.
|
|
**/
|
|
static int
|
|
lpfc_nvme_fcp_io_submit(struct nvme_fc_local_port *pnvme_lport,
|
|
struct nvme_fc_remote_port *pnvme_rport,
|
|
void *hw_queue_handle,
|
|
struct nvmefc_fcp_req *pnvme_fcreq)
|
|
{
|
|
int ret = 0;
|
|
int expedite = 0;
|
|
int idx;
|
|
struct lpfc_nvme_lport *lport;
|
|
struct lpfc_nvme_ctrl_stat *cstat;
|
|
struct lpfc_vport *vport;
|
|
struct lpfc_hba *phba;
|
|
struct lpfc_nodelist *ndlp;
|
|
struct lpfc_nvme_buf *lpfc_ncmd;
|
|
struct lpfc_nvme_rport *rport;
|
|
struct lpfc_nvme_qhandle *lpfc_queue_info;
|
|
struct lpfc_nvme_fcpreq_priv *freqpriv;
|
|
struct nvme_common_command *sqe;
|
|
#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
|
|
uint64_t start = 0;
|
|
#endif
|
|
|
|
/* Validate pointers. LLDD fault handling with transport does
|
|
* have timing races.
|
|
*/
|
|
lport = (struct lpfc_nvme_lport *)pnvme_lport->private;
|
|
if (unlikely(!lport)) {
|
|
ret = -EINVAL;
|
|
goto out_fail;
|
|
}
|
|
|
|
vport = lport->vport;
|
|
|
|
if (unlikely(!hw_queue_handle)) {
|
|
lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME_IOERR,
|
|
"6117 Fail IO, NULL hw_queue_handle\n");
|
|
atomic_inc(&lport->xmt_fcp_err);
|
|
ret = -EBUSY;
|
|
goto out_fail;
|
|
}
|
|
|
|
phba = vport->phba;
|
|
|
|
if (vport->load_flag & FC_UNLOADING) {
|
|
ret = -ENODEV;
|
|
goto out_fail;
|
|
}
|
|
|
|
if (vport->load_flag & FC_UNLOADING) {
|
|
lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME_IOERR,
|
|
"6124 Fail IO, Driver unload\n");
|
|
atomic_inc(&lport->xmt_fcp_err);
|
|
ret = -ENODEV;
|
|
goto out_fail;
|
|
}
|
|
|
|
freqpriv = pnvme_fcreq->private;
|
|
if (unlikely(!freqpriv)) {
|
|
lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME_IOERR,
|
|
"6158 Fail IO, NULL request data\n");
|
|
atomic_inc(&lport->xmt_fcp_err);
|
|
ret = -EINVAL;
|
|
goto out_fail;
|
|
}
|
|
|
|
#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
|
|
if (phba->ktime_on)
|
|
start = ktime_get_ns();
|
|
#endif
|
|
rport = (struct lpfc_nvme_rport *)pnvme_rport->private;
|
|
lpfc_queue_info = (struct lpfc_nvme_qhandle *)hw_queue_handle;
|
|
|
|
/*
|
|
* Catch race where our node has transitioned, but the
|
|
* transport is still transitioning.
|
|
*/
|
|
ndlp = rport->ndlp;
|
|
if (!ndlp || !NLP_CHK_NODE_ACT(ndlp)) {
|
|
lpfc_printf_vlog(vport, KERN_INFO, LOG_NODE | LOG_NVME_IOERR,
|
|
"6053 Fail IO, ndlp not ready: rport %p "
|
|
"ndlp %p, DID x%06x\n",
|
|
rport, ndlp, pnvme_rport->port_id);
|
|
atomic_inc(&lport->xmt_fcp_err);
|
|
ret = -EBUSY;
|
|
goto out_fail;
|
|
}
|
|
|
|
/* The remote node has to be a mapped target or it's an error. */
|
|
if ((ndlp->nlp_type & NLP_NVME_TARGET) &&
|
|
(ndlp->nlp_state != NLP_STE_MAPPED_NODE)) {
|
|
lpfc_printf_vlog(vport, KERN_INFO, LOG_NODE | LOG_NVME_IOERR,
|
|
"6036 Fail IO, DID x%06x not ready for "
|
|
"IO. State x%x, Type x%x Flg x%x\n",
|
|
pnvme_rport->port_id,
|
|
ndlp->nlp_state, ndlp->nlp_type,
|
|
ndlp->upcall_flags);
|
|
atomic_inc(&lport->xmt_fcp_bad_ndlp);
|
|
ret = -EBUSY;
|
|
goto out_fail;
|
|
|
|
}
|
|
|
|
/* Currently only NVME Keep alive commands should be expedited
|
|
* if the driver runs out of a resource. These should only be
|
|
* issued on the admin queue, qidx 0
|
|
*/
|
|
if (!lpfc_queue_info->qidx && !pnvme_fcreq->sg_cnt) {
|
|
sqe = &((struct nvme_fc_cmd_iu *)
|
|
pnvme_fcreq->cmdaddr)->sqe.common;
|
|
if (sqe->opcode == nvme_admin_keep_alive)
|
|
expedite = 1;
|
|
}
|
|
|
|
/* The node is shared with FCP IO, make sure the IO pending count does
|
|
* not exceed the programmed depth.
|
|
*/
|
|
if ((atomic_read(&ndlp->cmd_pending) >= ndlp->cmd_qdepth) &&
|
|
!expedite) {
|
|
lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME_IOERR,
|
|
"6174 Fail IO, ndlp qdepth exceeded: "
|
|
"idx %d DID %x pend %d qdepth %d\n",
|
|
lpfc_queue_info->index, ndlp->nlp_DID,
|
|
atomic_read(&ndlp->cmd_pending),
|
|
ndlp->cmd_qdepth);
|
|
atomic_inc(&lport->xmt_fcp_qdepth);
|
|
ret = -EBUSY;
|
|
goto out_fail;
|
|
}
|
|
|
|
lpfc_ncmd = lpfc_get_nvme_buf(phba, ndlp, expedite);
|
|
if (lpfc_ncmd == NULL) {
|
|
atomic_inc(&lport->xmt_fcp_noxri);
|
|
lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME_IOERR,
|
|
"6065 Fail IO, driver buffer pool is empty: "
|
|
"idx %d DID %x\n",
|
|
lpfc_queue_info->index, ndlp->nlp_DID);
|
|
ret = -EBUSY;
|
|
goto out_fail;
|
|
}
|
|
#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
|
|
if (start) {
|
|
lpfc_ncmd->ts_cmd_start = start;
|
|
lpfc_ncmd->ts_last_cmd = phba->ktime_last_cmd;
|
|
} else {
|
|
lpfc_ncmd->ts_cmd_start = 0;
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* Store the data needed by the driver to issue, abort, and complete
|
|
* an IO.
|
|
* Do not let the IO hang out forever. There is no midlayer issuing
|
|
* an abort so inform the FW of the maximum IO pending time.
|
|
*/
|
|
freqpriv->nvme_buf = lpfc_ncmd;
|
|
lpfc_ncmd->nvmeCmd = pnvme_fcreq;
|
|
lpfc_ncmd->nrport = rport;
|
|
lpfc_ncmd->ndlp = ndlp;
|
|
lpfc_ncmd->start_time = jiffies;
|
|
|
|
/*
|
|
* Issue the IO on the WQ indicated by index in the hw_queue_handle.
|
|
* This identfier was create in our hardware queue create callback
|
|
* routine. The driver now is dependent on the IO queue steering from
|
|
* the transport. We are trusting the upper NVME layers know which
|
|
* index to use and that they have affinitized a CPU to this hardware
|
|
* queue. A hardware queue maps to a driver MSI-X vector/EQ/CQ/WQ.
|
|
*/
|
|
idx = lpfc_queue_info->index;
|
|
lpfc_ncmd->cur_iocbq.hba_wqidx = idx;
|
|
cstat = &lport->cstat[idx];
|
|
|
|
lpfc_nvme_prep_io_cmd(vport, lpfc_ncmd, ndlp, cstat);
|
|
ret = lpfc_nvme_prep_io_dma(vport, lpfc_ncmd);
|
|
if (ret) {
|
|
lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME_IOERR,
|
|
"6175 Fail IO, Prep DMA: "
|
|
"idx %d DID %x\n",
|
|
lpfc_queue_info->index, ndlp->nlp_DID);
|
|
atomic_inc(&lport->xmt_fcp_err);
|
|
ret = -ENOMEM;
|
|
goto out_free_nvme_buf;
|
|
}
|
|
|
|
atomic_inc(&ndlp->cmd_pending);
|
|
|
|
lpfc_nvmeio_data(phba, "NVME FCP XMIT: xri x%x idx %d to %06x\n",
|
|
lpfc_ncmd->cur_iocbq.sli4_xritag,
|
|
lpfc_queue_info->index, ndlp->nlp_DID);
|
|
|
|
ret = lpfc_sli4_issue_wqe(phba, LPFC_FCP_RING, &lpfc_ncmd->cur_iocbq);
|
|
if (ret) {
|
|
atomic_inc(&lport->xmt_fcp_wqerr);
|
|
atomic_dec(&ndlp->cmd_pending);
|
|
lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME_IOERR,
|
|
"6113 Fail IO, Could not issue WQE err %x "
|
|
"sid: x%x did: x%x oxid: x%x\n",
|
|
ret, vport->fc_myDID, ndlp->nlp_DID,
|
|
lpfc_ncmd->cur_iocbq.sli4_xritag);
|
|
goto out_free_nvme_buf;
|
|
}
|
|
|
|
#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
|
|
if (lpfc_ncmd->ts_cmd_start)
|
|
lpfc_ncmd->ts_cmd_wqput = ktime_get_ns();
|
|
|
|
if (phba->cpucheck_on & LPFC_CHECK_NVME_IO) {
|
|
lpfc_ncmd->cpu = smp_processor_id();
|
|
if (lpfc_ncmd->cpu != lpfc_queue_info->index) {
|
|
/* Check for admin queue */
|
|
if (lpfc_queue_info->qidx) {
|
|
lpfc_printf_vlog(vport,
|
|
KERN_ERR, LOG_NVME_IOERR,
|
|
"6702 CPU Check cmd: "
|
|
"cpu %d wq %d\n",
|
|
lpfc_ncmd->cpu,
|
|
lpfc_queue_info->index);
|
|
}
|
|
lpfc_ncmd->cpu = lpfc_queue_info->index;
|
|
}
|
|
if (lpfc_ncmd->cpu < LPFC_CHECK_CPU_CNT)
|
|
phba->cpucheck_xmt_io[lpfc_ncmd->cpu]++;
|
|
}
|
|
#endif
|
|
return 0;
|
|
|
|
out_free_nvme_buf:
|
|
if (lpfc_ncmd->nvmeCmd->sg_cnt) {
|
|
if (lpfc_ncmd->nvmeCmd->io_dir == NVMEFC_FCP_WRITE)
|
|
atomic_dec(&cstat->fc4NvmeOutputRequests);
|
|
else
|
|
atomic_dec(&cstat->fc4NvmeInputRequests);
|
|
} else
|
|
atomic_dec(&cstat->fc4NvmeControlRequests);
|
|
lpfc_release_nvme_buf(phba, lpfc_ncmd);
|
|
out_fail:
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* lpfc_nvme_abort_fcreq_cmpl - Complete an NVME FCP abort request.
|
|
* @phba: Pointer to HBA context object
|
|
* @cmdiocb: Pointer to command iocb object.
|
|
* @rspiocb: Pointer to response iocb object.
|
|
*
|
|
* This is the callback function for any NVME FCP IO that was aborted.
|
|
*
|
|
* Return value:
|
|
* None
|
|
**/
|
|
void
|
|
lpfc_nvme_abort_fcreq_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
|
|
struct lpfc_wcqe_complete *abts_cmpl)
|
|
{
|
|
lpfc_printf_log(phba, KERN_INFO, LOG_NVME,
|
|
"6145 ABORT_XRI_CN completing on rpi x%x "
|
|
"original iotag x%x, abort cmd iotag x%x "
|
|
"req_tag x%x, status x%x, hwstatus x%x\n",
|
|
cmdiocb->iocb.un.acxri.abortContextTag,
|
|
cmdiocb->iocb.un.acxri.abortIoTag,
|
|
cmdiocb->iotag,
|
|
bf_get(lpfc_wcqe_c_request_tag, abts_cmpl),
|
|
bf_get(lpfc_wcqe_c_status, abts_cmpl),
|
|
bf_get(lpfc_wcqe_c_hw_status, abts_cmpl));
|
|
lpfc_sli_release_iocbq(phba, cmdiocb);
|
|
}
|
|
|
|
/**
|
|
* lpfc_nvme_fcp_abort - Issue an NVME-over-FCP ABTS
|
|
* @lpfc_pnvme: Pointer to the driver's nvme instance data
|
|
* @lpfc_nvme_lport: Pointer to the driver's local port data
|
|
* @lpfc_nvme_rport: Pointer to the rport getting the @lpfc_nvme_ereq
|
|
* @lpfc_nvme_fcreq: IO request from nvme fc to driver.
|
|
* @hw_queue_handle: Driver-returned handle in lpfc_nvme_create_queue
|
|
*
|
|
* Driver registers this routine as its nvme request io abort handler. This
|
|
* routine issues an fcp Abort WQE with data from the @lpfc_nvme_fcpreq
|
|
* data structure to the rport indicated in @lpfc_nvme_rport. This routine
|
|
* is executed asynchronously - one the target is validated as "MAPPED" and
|
|
* ready for IO, the driver issues the abort request and returns.
|
|
*
|
|
* Return value:
|
|
* None
|
|
**/
|
|
static void
|
|
lpfc_nvme_fcp_abort(struct nvme_fc_local_port *pnvme_lport,
|
|
struct nvme_fc_remote_port *pnvme_rport,
|
|
void *hw_queue_handle,
|
|
struct nvmefc_fcp_req *pnvme_fcreq)
|
|
{
|
|
struct lpfc_nvme_lport *lport;
|
|
struct lpfc_vport *vport;
|
|
struct lpfc_hba *phba;
|
|
struct lpfc_nvme_buf *lpfc_nbuf;
|
|
struct lpfc_iocbq *abts_buf;
|
|
struct lpfc_iocbq *nvmereq_wqe;
|
|
struct lpfc_nvme_fcpreq_priv *freqpriv;
|
|
union lpfc_wqe128 *abts_wqe;
|
|
unsigned long flags;
|
|
int ret_val;
|
|
|
|
/* Validate pointers. LLDD fault handling with transport does
|
|
* have timing races.
|
|
*/
|
|
lport = (struct lpfc_nvme_lport *)pnvme_lport->private;
|
|
if (unlikely(!lport))
|
|
return;
|
|
|
|
vport = lport->vport;
|
|
|
|
if (unlikely(!hw_queue_handle)) {
|
|
lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME_ABTS,
|
|
"6129 Fail Abort, HW Queue Handle NULL.\n");
|
|
return;
|
|
}
|
|
|
|
phba = vport->phba;
|
|
freqpriv = pnvme_fcreq->private;
|
|
|
|
if (unlikely(!freqpriv))
|
|
return;
|
|
if (vport->load_flag & FC_UNLOADING)
|
|
return;
|
|
|
|
/* Announce entry to new IO submit field. */
|
|
lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME_ABTS,
|
|
"6002 Abort Request to rport DID x%06x "
|
|
"for nvme_fc_req %p\n",
|
|
pnvme_rport->port_id,
|
|
pnvme_fcreq);
|
|
|
|
/* If the hba is getting reset, this flag is set. It is
|
|
* cleared when the reset is complete and rings reestablished.
|
|
*/
|
|
spin_lock_irqsave(&phba->hbalock, flags);
|
|
/* driver queued commands are in process of being flushed */
|
|
if (phba->hba_flag & HBA_NVME_IOQ_FLUSH) {
|
|
spin_unlock_irqrestore(&phba->hbalock, flags);
|
|
lpfc_printf_vlog(vport, KERN_ERR, LOG_NVME_ABTS,
|
|
"6139 Driver in reset cleanup - flushing "
|
|
"NVME Req now. hba_flag x%x\n",
|
|
phba->hba_flag);
|
|
return;
|
|
}
|
|
|
|
lpfc_nbuf = freqpriv->nvme_buf;
|
|
if (!lpfc_nbuf) {
|
|
spin_unlock_irqrestore(&phba->hbalock, flags);
|
|
lpfc_printf_vlog(vport, KERN_ERR, LOG_NVME_ABTS,
|
|
"6140 NVME IO req has no matching lpfc nvme "
|
|
"io buffer. Skipping abort req.\n");
|
|
return;
|
|
} else if (!lpfc_nbuf->nvmeCmd) {
|
|
spin_unlock_irqrestore(&phba->hbalock, flags);
|
|
lpfc_printf_vlog(vport, KERN_ERR, LOG_NVME_ABTS,
|
|
"6141 lpfc NVME IO req has no nvme_fcreq "
|
|
"io buffer. Skipping abort req.\n");
|
|
return;
|
|
}
|
|
nvmereq_wqe = &lpfc_nbuf->cur_iocbq;
|
|
|
|
/*
|
|
* The lpfc_nbuf and the mapped nvme_fcreq in the driver's
|
|
* state must match the nvme_fcreq passed by the nvme
|
|
* transport. If they don't match, it is likely the driver
|
|
* has already completed the NVME IO and the nvme transport
|
|
* has not seen it yet.
|
|
*/
|
|
if (lpfc_nbuf->nvmeCmd != pnvme_fcreq) {
|
|
spin_unlock_irqrestore(&phba->hbalock, flags);
|
|
lpfc_printf_vlog(vport, KERN_ERR, LOG_NVME_ABTS,
|
|
"6143 NVME req mismatch: "
|
|
"lpfc_nbuf %p nvmeCmd %p, "
|
|
"pnvme_fcreq %p. Skipping Abort xri x%x\n",
|
|
lpfc_nbuf, lpfc_nbuf->nvmeCmd,
|
|
pnvme_fcreq, nvmereq_wqe->sli4_xritag);
|
|
return;
|
|
}
|
|
|
|
/* Don't abort IOs no longer on the pending queue. */
|
|
if (!(nvmereq_wqe->iocb_flag & LPFC_IO_ON_TXCMPLQ)) {
|
|
spin_unlock_irqrestore(&phba->hbalock, flags);
|
|
lpfc_printf_vlog(vport, KERN_ERR, LOG_NVME_ABTS,
|
|
"6142 NVME IO req %p not queued - skipping "
|
|
"abort req xri x%x\n",
|
|
pnvme_fcreq, nvmereq_wqe->sli4_xritag);
|
|
return;
|
|
}
|
|
|
|
atomic_inc(&lport->xmt_fcp_abort);
|
|
lpfc_nvmeio_data(phba, "NVME FCP ABORT: xri x%x idx %d to %06x\n",
|
|
nvmereq_wqe->sli4_xritag,
|
|
nvmereq_wqe->hba_wqidx, pnvme_rport->port_id);
|
|
|
|
/* Outstanding abort is in progress */
|
|
if (nvmereq_wqe->iocb_flag & LPFC_DRIVER_ABORTED) {
|
|
spin_unlock_irqrestore(&phba->hbalock, flags);
|
|
lpfc_printf_vlog(vport, KERN_ERR, LOG_NVME_ABTS,
|
|
"6144 Outstanding NVME I/O Abort Request "
|
|
"still pending on nvme_fcreq %p, "
|
|
"lpfc_ncmd %p xri x%x\n",
|
|
pnvme_fcreq, lpfc_nbuf,
|
|
nvmereq_wqe->sli4_xritag);
|
|
return;
|
|
}
|
|
|
|
abts_buf = __lpfc_sli_get_iocbq(phba);
|
|
if (!abts_buf) {
|
|
spin_unlock_irqrestore(&phba->hbalock, flags);
|
|
lpfc_printf_vlog(vport, KERN_ERR, LOG_NVME_ABTS,
|
|
"6136 No available abort wqes. Skipping "
|
|
"Abts req for nvme_fcreq %p xri x%x\n",
|
|
pnvme_fcreq, nvmereq_wqe->sli4_xritag);
|
|
return;
|
|
}
|
|
|
|
/* Ready - mark outstanding as aborted by driver. */
|
|
nvmereq_wqe->iocb_flag |= LPFC_DRIVER_ABORTED;
|
|
|
|
/* Complete prepping the abort wqe and issue to the FW. */
|
|
abts_wqe = &abts_buf->wqe;
|
|
|
|
/* WQEs are reused. Clear stale data and set key fields to
|
|
* zero like ia, iaab, iaar, xri_tag, and ctxt_tag.
|
|
*/
|
|
memset(abts_wqe, 0, sizeof(union lpfc_wqe));
|
|
bf_set(abort_cmd_criteria, &abts_wqe->abort_cmd, T_XRI_TAG);
|
|
|
|
/* word 7 */
|
|
bf_set(wqe_ct, &abts_wqe->abort_cmd.wqe_com, 0);
|
|
bf_set(wqe_cmnd, &abts_wqe->abort_cmd.wqe_com, CMD_ABORT_XRI_CX);
|
|
bf_set(wqe_class, &abts_wqe->abort_cmd.wqe_com,
|
|
nvmereq_wqe->iocb.ulpClass);
|
|
|
|
/* word 8 - tell the FW to abort the IO associated with this
|
|
* outstanding exchange ID.
|
|
*/
|
|
abts_wqe->abort_cmd.wqe_com.abort_tag = nvmereq_wqe->sli4_xritag;
|
|
|
|
/* word 9 - this is the iotag for the abts_wqe completion. */
|
|
bf_set(wqe_reqtag, &abts_wqe->abort_cmd.wqe_com,
|
|
abts_buf->iotag);
|
|
|
|
/* word 10 */
|
|
bf_set(wqe_wqid, &abts_wqe->abort_cmd.wqe_com, nvmereq_wqe->hba_wqidx);
|
|
bf_set(wqe_qosd, &abts_wqe->abort_cmd.wqe_com, 1);
|
|
bf_set(wqe_lenloc, &abts_wqe->abort_cmd.wqe_com, LPFC_WQE_LENLOC_NONE);
|
|
|
|
/* word 11 */
|
|
bf_set(wqe_cmd_type, &abts_wqe->abort_cmd.wqe_com, OTHER_COMMAND);
|
|
bf_set(wqe_wqec, &abts_wqe->abort_cmd.wqe_com, 1);
|
|
bf_set(wqe_cqid, &abts_wqe->abort_cmd.wqe_com, LPFC_WQE_CQ_ID_DEFAULT);
|
|
|
|
/* ABTS WQE must go to the same WQ as the WQE to be aborted */
|
|
abts_buf->iocb_flag |= LPFC_IO_NVME;
|
|
abts_buf->hba_wqidx = nvmereq_wqe->hba_wqidx;
|
|
abts_buf->vport = vport;
|
|
abts_buf->wqe_cmpl = lpfc_nvme_abort_fcreq_cmpl;
|
|
ret_val = lpfc_sli4_issue_wqe(phba, LPFC_FCP_RING, abts_buf);
|
|
spin_unlock_irqrestore(&phba->hbalock, flags);
|
|
if (ret_val) {
|
|
lpfc_printf_vlog(vport, KERN_ERR, LOG_NVME_ABTS,
|
|
"6137 Failed abts issue_wqe with status x%x "
|
|
"for nvme_fcreq %p.\n",
|
|
ret_val, pnvme_fcreq);
|
|
lpfc_sli_release_iocbq(phba, abts_buf);
|
|
return;
|
|
}
|
|
|
|
lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME_ABTS,
|
|
"6138 Transport Abort NVME Request Issued for "
|
|
"ox_id x%x on reqtag x%x\n",
|
|
nvmereq_wqe->sli4_xritag,
|
|
abts_buf->iotag);
|
|
}
|
|
|
|
/* Declare and initialization an instance of the FC NVME template. */
|
|
static struct nvme_fc_port_template lpfc_nvme_template = {
|
|
/* initiator-based functions */
|
|
.localport_delete = lpfc_nvme_localport_delete,
|
|
.remoteport_delete = lpfc_nvme_remoteport_delete,
|
|
.create_queue = lpfc_nvme_create_queue,
|
|
.delete_queue = lpfc_nvme_delete_queue,
|
|
.ls_req = lpfc_nvme_ls_req,
|
|
.fcp_io = lpfc_nvme_fcp_io_submit,
|
|
.ls_abort = lpfc_nvme_ls_abort,
|
|
.fcp_abort = lpfc_nvme_fcp_abort,
|
|
|
|
.max_hw_queues = 1,
|
|
.max_sgl_segments = LPFC_NVME_DEFAULT_SEGS,
|
|
.max_dif_sgl_segments = LPFC_NVME_DEFAULT_SEGS,
|
|
.dma_boundary = 0xFFFFFFFF,
|
|
|
|
/* Sizes of additional private data for data structures.
|
|
* No use for the last two sizes at this time.
|
|
*/
|
|
.local_priv_sz = sizeof(struct lpfc_nvme_lport),
|
|
.remote_priv_sz = sizeof(struct lpfc_nvme_rport),
|
|
.lsrqst_priv_sz = 0,
|
|
.fcprqst_priv_sz = sizeof(struct lpfc_nvme_fcpreq_priv),
|
|
};
|
|
|
|
/**
|
|
* lpfc_sli4_post_nvme_sgl_block - post a block of nvme sgl list to firmware
|
|
* @phba: pointer to lpfc hba data structure.
|
|
* @nblist: pointer to nvme buffer list.
|
|
* @count: number of scsi buffers on the list.
|
|
*
|
|
* This routine is invoked to post a block of @count scsi sgl pages from a
|
|
* SCSI buffer list @nblist to the HBA using non-embedded mailbox command.
|
|
* No Lock is held.
|
|
*
|
|
**/
|
|
static int
|
|
lpfc_sli4_post_nvme_sgl_block(struct lpfc_hba *phba,
|
|
struct list_head *nblist,
|
|
int count)
|
|
{
|
|
struct lpfc_nvme_buf *lpfc_ncmd;
|
|
struct lpfc_mbx_post_uembed_sgl_page1 *sgl;
|
|
struct sgl_page_pairs *sgl_pg_pairs;
|
|
void *viraddr;
|
|
LPFC_MBOXQ_t *mbox;
|
|
uint32_t reqlen, alloclen, pg_pairs;
|
|
uint32_t mbox_tmo;
|
|
uint16_t xritag_start = 0;
|
|
int rc = 0;
|
|
uint32_t shdr_status, shdr_add_status;
|
|
dma_addr_t pdma_phys_bpl1;
|
|
union lpfc_sli4_cfg_shdr *shdr;
|
|
|
|
/* Calculate the requested length of the dma memory */
|
|
reqlen = count * sizeof(struct sgl_page_pairs) +
|
|
sizeof(union lpfc_sli4_cfg_shdr) + sizeof(uint32_t);
|
|
if (reqlen > SLI4_PAGE_SIZE) {
|
|
lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
|
|
"6118 Block sgl registration required DMA "
|
|
"size (%d) great than a page\n", reqlen);
|
|
return -ENOMEM;
|
|
}
|
|
mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
|
|
if (!mbox) {
|
|
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
|
|
"6119 Failed to allocate mbox cmd memory\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
/* Allocate DMA memory and set up the non-embedded mailbox command */
|
|
alloclen = lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_FCOE,
|
|
LPFC_MBOX_OPCODE_FCOE_POST_SGL_PAGES, reqlen,
|
|
LPFC_SLI4_MBX_NEMBED);
|
|
|
|
if (alloclen < reqlen) {
|
|
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
|
|
"6120 Allocated DMA memory size (%d) is "
|
|
"less than the requested DMA memory "
|
|
"size (%d)\n", alloclen, reqlen);
|
|
lpfc_sli4_mbox_cmd_free(phba, mbox);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
/* Get the first SGE entry from the non-embedded DMA memory */
|
|
viraddr = mbox->sge_array->addr[0];
|
|
|
|
/* Set up the SGL pages in the non-embedded DMA pages */
|
|
sgl = (struct lpfc_mbx_post_uembed_sgl_page1 *)viraddr;
|
|
sgl_pg_pairs = &sgl->sgl_pg_pairs;
|
|
|
|
pg_pairs = 0;
|
|
list_for_each_entry(lpfc_ncmd, nblist, list) {
|
|
/* Set up the sge entry */
|
|
sgl_pg_pairs->sgl_pg0_addr_lo =
|
|
cpu_to_le32(putPaddrLow(lpfc_ncmd->dma_phys_sgl));
|
|
sgl_pg_pairs->sgl_pg0_addr_hi =
|
|
cpu_to_le32(putPaddrHigh(lpfc_ncmd->dma_phys_sgl));
|
|
if (phba->cfg_sg_dma_buf_size > SGL_PAGE_SIZE)
|
|
pdma_phys_bpl1 = lpfc_ncmd->dma_phys_sgl +
|
|
SGL_PAGE_SIZE;
|
|
else
|
|
pdma_phys_bpl1 = 0;
|
|
sgl_pg_pairs->sgl_pg1_addr_lo =
|
|
cpu_to_le32(putPaddrLow(pdma_phys_bpl1));
|
|
sgl_pg_pairs->sgl_pg1_addr_hi =
|
|
cpu_to_le32(putPaddrHigh(pdma_phys_bpl1));
|
|
/* Keep the first xritag on the list */
|
|
if (pg_pairs == 0)
|
|
xritag_start = lpfc_ncmd->cur_iocbq.sli4_xritag;
|
|
sgl_pg_pairs++;
|
|
pg_pairs++;
|
|
}
|
|
bf_set(lpfc_post_sgl_pages_xri, sgl, xritag_start);
|
|
bf_set(lpfc_post_sgl_pages_xricnt, sgl, pg_pairs);
|
|
/* Perform endian conversion if necessary */
|
|
sgl->word0 = cpu_to_le32(sgl->word0);
|
|
|
|
if (!phba->sli4_hba.intr_enable)
|
|
rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
|
|
else {
|
|
mbox_tmo = lpfc_mbox_tmo_val(phba, mbox);
|
|
rc = lpfc_sli_issue_mbox_wait(phba, mbox, mbox_tmo);
|
|
}
|
|
shdr = (union lpfc_sli4_cfg_shdr *)&sgl->cfg_shdr;
|
|
shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
|
|
shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
|
|
if (rc != MBX_TIMEOUT)
|
|
lpfc_sli4_mbox_cmd_free(phba, mbox);
|
|
if (shdr_status || shdr_add_status || rc) {
|
|
lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
|
|
"6125 POST_SGL_BLOCK mailbox command failed "
|
|
"status x%x add_status x%x mbx status x%x\n",
|
|
shdr_status, shdr_add_status, rc);
|
|
rc = -ENXIO;
|
|
}
|
|
return rc;
|
|
}
|
|
|
|
/**
|
|
* lpfc_post_nvme_sgl_list - Post blocks of nvme buffer sgls from a list
|
|
* @phba: pointer to lpfc hba data structure.
|
|
* @post_nblist: pointer to the nvme buffer list.
|
|
*
|
|
* This routine walks a list of nvme buffers that was passed in. It attempts
|
|
* to construct blocks of nvme buffer sgls which contains contiguous xris and
|
|
* uses the non-embedded SGL block post mailbox commands to post to the port.
|
|
* For single NVME buffer sgl with non-contiguous xri, if any, it shall use
|
|
* embedded SGL post mailbox command for posting. The @post_nblist passed in
|
|
* must be local list, thus no lock is needed when manipulate the list.
|
|
*
|
|
* Returns: 0 = failure, non-zero number of successfully posted buffers.
|
|
**/
|
|
static int
|
|
lpfc_post_nvme_sgl_list(struct lpfc_hba *phba,
|
|
struct list_head *post_nblist, int sb_count)
|
|
{
|
|
struct lpfc_nvme_buf *lpfc_ncmd, *lpfc_ncmd_next;
|
|
int status, sgl_size;
|
|
int post_cnt = 0, block_cnt = 0, num_posting = 0, num_posted = 0;
|
|
dma_addr_t pdma_phys_sgl1;
|
|
int last_xritag = NO_XRI;
|
|
int cur_xritag;
|
|
LIST_HEAD(prep_nblist);
|
|
LIST_HEAD(blck_nblist);
|
|
LIST_HEAD(nvme_nblist);
|
|
|
|
/* sanity check */
|
|
if (sb_count <= 0)
|
|
return -EINVAL;
|
|
|
|
sgl_size = phba->cfg_sg_dma_buf_size;
|
|
|
|
list_for_each_entry_safe(lpfc_ncmd, lpfc_ncmd_next, post_nblist, list) {
|
|
list_del_init(&lpfc_ncmd->list);
|
|
block_cnt++;
|
|
if ((last_xritag != NO_XRI) &&
|
|
(lpfc_ncmd->cur_iocbq.sli4_xritag != last_xritag + 1)) {
|
|
/* a hole in xri block, form a sgl posting block */
|
|
list_splice_init(&prep_nblist, &blck_nblist);
|
|
post_cnt = block_cnt - 1;
|
|
/* prepare list for next posting block */
|
|
list_add_tail(&lpfc_ncmd->list, &prep_nblist);
|
|
block_cnt = 1;
|
|
} else {
|
|
/* prepare list for next posting block */
|
|
list_add_tail(&lpfc_ncmd->list, &prep_nblist);
|
|
/* enough sgls for non-embed sgl mbox command */
|
|
if (block_cnt == LPFC_NEMBED_MBOX_SGL_CNT) {
|
|
list_splice_init(&prep_nblist, &blck_nblist);
|
|
post_cnt = block_cnt;
|
|
block_cnt = 0;
|
|
}
|
|
}
|
|
num_posting++;
|
|
last_xritag = lpfc_ncmd->cur_iocbq.sli4_xritag;
|
|
|
|
/* end of repost sgl list condition for NVME buffers */
|
|
if (num_posting == sb_count) {
|
|
if (post_cnt == 0) {
|
|
/* last sgl posting block */
|
|
list_splice_init(&prep_nblist, &blck_nblist);
|
|
post_cnt = block_cnt;
|
|
} else if (block_cnt == 1) {
|
|
/* last single sgl with non-contiguous xri */
|
|
if (sgl_size > SGL_PAGE_SIZE)
|
|
pdma_phys_sgl1 =
|
|
lpfc_ncmd->dma_phys_sgl +
|
|
SGL_PAGE_SIZE;
|
|
else
|
|
pdma_phys_sgl1 = 0;
|
|
cur_xritag = lpfc_ncmd->cur_iocbq.sli4_xritag;
|
|
status = lpfc_sli4_post_sgl(phba,
|
|
lpfc_ncmd->dma_phys_sgl,
|
|
pdma_phys_sgl1, cur_xritag);
|
|
if (status) {
|
|
/* failure, put on abort nvme list */
|
|
lpfc_ncmd->flags |= LPFC_SBUF_XBUSY;
|
|
} else {
|
|
/* success, put on NVME buffer list */
|
|
lpfc_ncmd->flags &= ~LPFC_SBUF_XBUSY;
|
|
lpfc_ncmd->status = IOSTAT_SUCCESS;
|
|
num_posted++;
|
|
}
|
|
/* success, put on NVME buffer sgl list */
|
|
list_add_tail(&lpfc_ncmd->list, &nvme_nblist);
|
|
}
|
|
}
|
|
|
|
/* continue until a nembed page worth of sgls */
|
|
if (post_cnt == 0)
|
|
continue;
|
|
|
|
/* post block of NVME buffer list sgls */
|
|
status = lpfc_sli4_post_nvme_sgl_block(phba, &blck_nblist,
|
|
post_cnt);
|
|
|
|
/* don't reset xirtag due to hole in xri block */
|
|
if (block_cnt == 0)
|
|
last_xritag = NO_XRI;
|
|
|
|
/* reset NVME buffer post count for next round of posting */
|
|
post_cnt = 0;
|
|
|
|
/* put posted NVME buffer-sgl posted on NVME buffer sgl list */
|
|
while (!list_empty(&blck_nblist)) {
|
|
list_remove_head(&blck_nblist, lpfc_ncmd,
|
|
struct lpfc_nvme_buf, list);
|
|
if (status) {
|
|
/* failure, put on abort nvme list */
|
|
lpfc_ncmd->flags |= LPFC_SBUF_XBUSY;
|
|
} else {
|
|
/* success, put on NVME buffer list */
|
|
lpfc_ncmd->flags &= ~LPFC_SBUF_XBUSY;
|
|
lpfc_ncmd->status = IOSTAT_SUCCESS;
|
|
num_posted++;
|
|
}
|
|
list_add_tail(&lpfc_ncmd->list, &nvme_nblist);
|
|
}
|
|
}
|
|
/* Push NVME buffers with sgl posted to the available list */
|
|
while (!list_empty(&nvme_nblist)) {
|
|
list_remove_head(&nvme_nblist, lpfc_ncmd,
|
|
struct lpfc_nvme_buf, list);
|
|
lpfc_release_nvme_buf(phba, lpfc_ncmd);
|
|
}
|
|
return num_posted;
|
|
}
|
|
|
|
/**
|
|
* lpfc_repost_nvme_sgl_list - Repost all the allocated nvme buffer sgls
|
|
* @phba: pointer to lpfc hba data structure.
|
|
*
|
|
* This routine walks the list of nvme buffers that have been allocated and
|
|
* repost them to the port by using SGL block post. This is needed after a
|
|
* pci_function_reset/warm_start or start. The lpfc_hba_down_post_s4 routine
|
|
* is responsible for moving all nvme buffers on the lpfc_abts_nvme_sgl_list
|
|
* to the lpfc_nvme_buf_list. If the repost fails, reject all nvme buffers.
|
|
*
|
|
* Returns: 0 = success, non-zero failure.
|
|
**/
|
|
int
|
|
lpfc_repost_nvme_sgl_list(struct lpfc_hba *phba)
|
|
{
|
|
LIST_HEAD(post_nblist);
|
|
int num_posted, rc = 0;
|
|
|
|
/* get all NVME buffers need to repost to a local list */
|
|
spin_lock_irq(&phba->nvme_buf_list_get_lock);
|
|
spin_lock(&phba->nvme_buf_list_put_lock);
|
|
list_splice_init(&phba->lpfc_nvme_buf_list_get, &post_nblist);
|
|
list_splice(&phba->lpfc_nvme_buf_list_put, &post_nblist);
|
|
phba->get_nvme_bufs = 0;
|
|
phba->put_nvme_bufs = 0;
|
|
spin_unlock(&phba->nvme_buf_list_put_lock);
|
|
spin_unlock_irq(&phba->nvme_buf_list_get_lock);
|
|
|
|
/* post the list of nvme buffer sgls to port if available */
|
|
if (!list_empty(&post_nblist)) {
|
|
num_posted = lpfc_post_nvme_sgl_list(phba, &post_nblist,
|
|
phba->sli4_hba.nvme_xri_cnt);
|
|
/* failed to post any nvme buffer, return error */
|
|
if (num_posted == 0)
|
|
rc = -EIO;
|
|
}
|
|
return rc;
|
|
}
|
|
|
|
/**
|
|
* lpfc_new_nvme_buf - Scsi buffer allocator for HBA with SLI4 IF spec
|
|
* @vport: The virtual port for which this call being executed.
|
|
* @num_to_allocate: The requested number of buffers to allocate.
|
|
*
|
|
* This routine allocates nvme buffers for device with SLI-4 interface spec,
|
|
* the nvme buffer contains all the necessary information needed to initiate
|
|
* a NVME I/O. After allocating up to @num_to_allocate NVME buffers and put
|
|
* them on a list, it post them to the port by using SGL block post.
|
|
*
|
|
* Return codes:
|
|
* int - number of nvme buffers that were allocated and posted.
|
|
* 0 = failure, less than num_to_alloc is a partial failure.
|
|
**/
|
|
static int
|
|
lpfc_new_nvme_buf(struct lpfc_vport *vport, int num_to_alloc)
|
|
{
|
|
struct lpfc_hba *phba = vport->phba;
|
|
struct lpfc_nvme_buf *lpfc_ncmd;
|
|
struct lpfc_iocbq *pwqeq;
|
|
union lpfc_wqe128 *wqe;
|
|
struct sli4_sge *sgl;
|
|
dma_addr_t pdma_phys_sgl;
|
|
uint16_t iotag, lxri = 0;
|
|
int bcnt, num_posted, sgl_size;
|
|
LIST_HEAD(prep_nblist);
|
|
LIST_HEAD(post_nblist);
|
|
LIST_HEAD(nvme_nblist);
|
|
|
|
sgl_size = phba->cfg_sg_dma_buf_size;
|
|
|
|
for (bcnt = 0; bcnt < num_to_alloc; bcnt++) {
|
|
lpfc_ncmd = kzalloc(sizeof(struct lpfc_nvme_buf), GFP_KERNEL);
|
|
if (!lpfc_ncmd)
|
|
break;
|
|
/*
|
|
* Get memory from the pci pool to map the virt space to
|
|
* pci bus space for an I/O. The DMA buffer includes the
|
|
* number of SGE's necessary to support the sg_tablesize.
|
|
*/
|
|
lpfc_ncmd->data = dma_pool_zalloc(phba->lpfc_sg_dma_buf_pool,
|
|
GFP_KERNEL,
|
|
&lpfc_ncmd->dma_handle);
|
|
if (!lpfc_ncmd->data) {
|
|
kfree(lpfc_ncmd);
|
|
break;
|
|
}
|
|
|
|
lxri = lpfc_sli4_next_xritag(phba);
|
|
if (lxri == NO_XRI) {
|
|
dma_pool_free(phba->lpfc_sg_dma_buf_pool,
|
|
lpfc_ncmd->data, lpfc_ncmd->dma_handle);
|
|
kfree(lpfc_ncmd);
|
|
break;
|
|
}
|
|
pwqeq = &(lpfc_ncmd->cur_iocbq);
|
|
wqe = &pwqeq->wqe;
|
|
|
|
/* Allocate iotag for lpfc_ncmd->cur_iocbq. */
|
|
iotag = lpfc_sli_next_iotag(phba, pwqeq);
|
|
if (iotag == 0) {
|
|
dma_pool_free(phba->lpfc_sg_dma_buf_pool,
|
|
lpfc_ncmd->data, lpfc_ncmd->dma_handle);
|
|
kfree(lpfc_ncmd);
|
|
lpfc_printf_log(phba, KERN_ERR, LOG_NVME_IOERR,
|
|
"6121 Failed to allocated IOTAG for"
|
|
" XRI:0x%x\n", lxri);
|
|
lpfc_sli4_free_xri(phba, lxri);
|
|
break;
|
|
}
|
|
pwqeq->sli4_lxritag = lxri;
|
|
pwqeq->sli4_xritag = phba->sli4_hba.xri_ids[lxri];
|
|
pwqeq->iocb_flag |= LPFC_IO_NVME;
|
|
pwqeq->context1 = lpfc_ncmd;
|
|
pwqeq->wqe_cmpl = lpfc_nvme_io_cmd_wqe_cmpl;
|
|
|
|
/* Initialize local short-hand pointers. */
|
|
lpfc_ncmd->nvme_sgl = lpfc_ncmd->data;
|
|
sgl = lpfc_ncmd->nvme_sgl;
|
|
pdma_phys_sgl = lpfc_ncmd->dma_handle;
|
|
lpfc_ncmd->dma_phys_sgl = pdma_phys_sgl;
|
|
|
|
/* Rsp SGE will be filled in when we rcv an IO
|
|
* from the NVME Layer to be sent.
|
|
* The cmd is going to be embedded so we need a SKIP SGE.
|
|
*/
|
|
bf_set(lpfc_sli4_sge_type, sgl, LPFC_SGE_TYPE_SKIP);
|
|
bf_set(lpfc_sli4_sge_last, sgl, 0);
|
|
sgl->word2 = cpu_to_le32(sgl->word2);
|
|
/* Fill in word 3 / sgl_len during cmd submission */
|
|
|
|
lpfc_ncmd->cur_iocbq.context1 = lpfc_ncmd;
|
|
|
|
/* Initialize WQE */
|
|
memset(wqe, 0, sizeof(union lpfc_wqe));
|
|
|
|
/* add the nvme buffer to a post list */
|
|
list_add_tail(&lpfc_ncmd->list, &post_nblist);
|
|
spin_lock_irq(&phba->nvme_buf_list_get_lock);
|
|
phba->sli4_hba.nvme_xri_cnt++;
|
|
spin_unlock_irq(&phba->nvme_buf_list_get_lock);
|
|
}
|
|
lpfc_printf_log(phba, KERN_INFO, LOG_NVME,
|
|
"6114 Allocate %d out of %d requested new NVME "
|
|
"buffers\n", bcnt, num_to_alloc);
|
|
|
|
/* post the list of nvme buffer sgls to port if available */
|
|
if (!list_empty(&post_nblist))
|
|
num_posted = lpfc_post_nvme_sgl_list(phba,
|
|
&post_nblist, bcnt);
|
|
else
|
|
num_posted = 0;
|
|
|
|
return num_posted;
|
|
}
|
|
|
|
static inline struct lpfc_nvme_buf *
|
|
lpfc_nvme_buf(struct lpfc_hba *phba)
|
|
{
|
|
struct lpfc_nvme_buf *lpfc_ncmd, *lpfc_ncmd_next;
|
|
|
|
list_for_each_entry_safe(lpfc_ncmd, lpfc_ncmd_next,
|
|
&phba->lpfc_nvme_buf_list_get, list) {
|
|
list_del_init(&lpfc_ncmd->list);
|
|
phba->get_nvme_bufs--;
|
|
return lpfc_ncmd;
|
|
}
|
|
return NULL;
|
|
}
|
|
|
|
/**
|
|
* lpfc_get_nvme_buf - Get a nvme buffer from lpfc_nvme_buf_list of the HBA
|
|
* @phba: The HBA for which this call is being executed.
|
|
*
|
|
* This routine removes a nvme buffer from head of @phba lpfc_nvme_buf_list list
|
|
* and returns to caller.
|
|
*
|
|
* Return codes:
|
|
* NULL - Error
|
|
* Pointer to lpfc_nvme_buf - Success
|
|
**/
|
|
static struct lpfc_nvme_buf *
|
|
lpfc_get_nvme_buf(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp,
|
|
int expedite)
|
|
{
|
|
struct lpfc_nvme_buf *lpfc_ncmd = NULL;
|
|
unsigned long iflag = 0;
|
|
|
|
spin_lock_irqsave(&phba->nvme_buf_list_get_lock, iflag);
|
|
if (phba->get_nvme_bufs > LPFC_NVME_EXPEDITE_XRICNT || expedite)
|
|
lpfc_ncmd = lpfc_nvme_buf(phba);
|
|
if (!lpfc_ncmd) {
|
|
spin_lock(&phba->nvme_buf_list_put_lock);
|
|
list_splice(&phba->lpfc_nvme_buf_list_put,
|
|
&phba->lpfc_nvme_buf_list_get);
|
|
phba->get_nvme_bufs += phba->put_nvme_bufs;
|
|
INIT_LIST_HEAD(&phba->lpfc_nvme_buf_list_put);
|
|
phba->put_nvme_bufs = 0;
|
|
spin_unlock(&phba->nvme_buf_list_put_lock);
|
|
if (phba->get_nvme_bufs > LPFC_NVME_EXPEDITE_XRICNT || expedite)
|
|
lpfc_ncmd = lpfc_nvme_buf(phba);
|
|
}
|
|
spin_unlock_irqrestore(&phba->nvme_buf_list_get_lock, iflag);
|
|
return lpfc_ncmd;
|
|
}
|
|
|
|
/**
|
|
* lpfc_release_nvme_buf: Return a nvme buffer back to hba nvme buf list.
|
|
* @phba: The Hba for which this call is being executed.
|
|
* @lpfc_ncmd: The nvme buffer which is being released.
|
|
*
|
|
* This routine releases @lpfc_ncmd nvme buffer by adding it to tail of @phba
|
|
* lpfc_nvme_buf_list list. For SLI4 XRI's are tied to the nvme buffer
|
|
* and cannot be reused for at least RA_TOV amount of time if it was
|
|
* aborted.
|
|
**/
|
|
static void
|
|
lpfc_release_nvme_buf(struct lpfc_hba *phba, struct lpfc_nvme_buf *lpfc_ncmd)
|
|
{
|
|
unsigned long iflag = 0;
|
|
|
|
lpfc_ncmd->nonsg_phys = 0;
|
|
if (lpfc_ncmd->flags & LPFC_SBUF_XBUSY) {
|
|
lpfc_printf_log(phba, KERN_INFO, LOG_NVME_ABTS,
|
|
"6310 XB release deferred for "
|
|
"ox_id x%x on reqtag x%x\n",
|
|
lpfc_ncmd->cur_iocbq.sli4_xritag,
|
|
lpfc_ncmd->cur_iocbq.iotag);
|
|
|
|
spin_lock_irqsave(&phba->sli4_hba.abts_nvme_buf_list_lock,
|
|
iflag);
|
|
list_add_tail(&lpfc_ncmd->list,
|
|
&phba->sli4_hba.lpfc_abts_nvme_buf_list);
|
|
spin_unlock_irqrestore(&phba->sli4_hba.abts_nvme_buf_list_lock,
|
|
iflag);
|
|
} else {
|
|
lpfc_ncmd->nvmeCmd = NULL;
|
|
lpfc_ncmd->cur_iocbq.iocb_flag = LPFC_IO_NVME;
|
|
spin_lock_irqsave(&phba->nvme_buf_list_put_lock, iflag);
|
|
list_add_tail(&lpfc_ncmd->list, &phba->lpfc_nvme_buf_list_put);
|
|
phba->put_nvme_bufs++;
|
|
spin_unlock_irqrestore(&phba->nvme_buf_list_put_lock, iflag);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* lpfc_nvme_create_localport - Create/Bind an nvme localport instance.
|
|
* @pvport - the lpfc_vport instance requesting a localport.
|
|
*
|
|
* This routine is invoked to create an nvme localport instance to bind
|
|
* to the nvme_fc_transport. It is called once during driver load
|
|
* like lpfc_create_shost after all other services are initialized.
|
|
* It requires a vport, vpi, and wwns at call time. Other localport
|
|
* parameters are modified as the driver's FCID and the Fabric WWN
|
|
* are established.
|
|
*
|
|
* Return codes
|
|
* 0 - successful
|
|
* -ENOMEM - no heap memory available
|
|
* other values - from nvme registration upcall
|
|
**/
|
|
int
|
|
lpfc_nvme_create_localport(struct lpfc_vport *vport)
|
|
{
|
|
int ret = 0;
|
|
struct lpfc_hba *phba = vport->phba;
|
|
struct nvme_fc_port_info nfcp_info;
|
|
struct nvme_fc_local_port *localport;
|
|
struct lpfc_nvme_lport *lport;
|
|
struct lpfc_nvme_ctrl_stat *cstat;
|
|
int len, i;
|
|
|
|
/* Initialize this localport instance. The vport wwn usage ensures
|
|
* that NPIV is accounted for.
|
|
*/
|
|
memset(&nfcp_info, 0, sizeof(struct nvme_fc_port_info));
|
|
nfcp_info.port_role = FC_PORT_ROLE_NVME_INITIATOR;
|
|
nfcp_info.node_name = wwn_to_u64(vport->fc_nodename.u.wwn);
|
|
nfcp_info.port_name = wwn_to_u64(vport->fc_portname.u.wwn);
|
|
|
|
/* Limit to LPFC_MAX_NVME_SEG_CNT.
|
|
* For now need + 1 to get around NVME transport logic.
|
|
*/
|
|
if (phba->cfg_sg_seg_cnt > LPFC_MAX_NVME_SEG_CNT) {
|
|
lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME | LOG_INIT,
|
|
"6300 Reducing sg segment cnt to %d\n",
|
|
LPFC_MAX_NVME_SEG_CNT);
|
|
phba->cfg_nvme_seg_cnt = LPFC_MAX_NVME_SEG_CNT;
|
|
} else {
|
|
phba->cfg_nvme_seg_cnt = phba->cfg_sg_seg_cnt;
|
|
}
|
|
lpfc_nvme_template.max_sgl_segments = phba->cfg_nvme_seg_cnt + 1;
|
|
lpfc_nvme_template.max_hw_queues = phba->cfg_nvme_io_channel;
|
|
|
|
cstat = kmalloc((sizeof(struct lpfc_nvme_ctrl_stat) *
|
|
phba->cfg_nvme_io_channel), GFP_KERNEL);
|
|
if (!cstat)
|
|
return -ENOMEM;
|
|
|
|
/* localport is allocated from the stack, but the registration
|
|
* call allocates heap memory as well as the private area.
|
|
*/
|
|
#if (IS_ENABLED(CONFIG_NVME_FC))
|
|
ret = nvme_fc_register_localport(&nfcp_info, &lpfc_nvme_template,
|
|
&vport->phba->pcidev->dev, &localport);
|
|
#else
|
|
ret = -ENOMEM;
|
|
#endif
|
|
if (!ret) {
|
|
lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME | LOG_NVME_DISC,
|
|
"6005 Successfully registered local "
|
|
"NVME port num %d, localP %p, private %p, "
|
|
"sg_seg %d\n",
|
|
localport->port_num, localport,
|
|
localport->private,
|
|
lpfc_nvme_template.max_sgl_segments);
|
|
|
|
/* Private is our lport size declared in the template. */
|
|
lport = (struct lpfc_nvme_lport *)localport->private;
|
|
vport->localport = localport;
|
|
lport->vport = vport;
|
|
lport->cstat = cstat;
|
|
vport->nvmei_support = 1;
|
|
|
|
atomic_set(&lport->xmt_fcp_noxri, 0);
|
|
atomic_set(&lport->xmt_fcp_bad_ndlp, 0);
|
|
atomic_set(&lport->xmt_fcp_qdepth, 0);
|
|
atomic_set(&lport->xmt_fcp_err, 0);
|
|
atomic_set(&lport->xmt_fcp_wqerr, 0);
|
|
atomic_set(&lport->xmt_fcp_abort, 0);
|
|
atomic_set(&lport->xmt_ls_abort, 0);
|
|
atomic_set(&lport->xmt_ls_err, 0);
|
|
atomic_set(&lport->cmpl_fcp_xb, 0);
|
|
atomic_set(&lport->cmpl_fcp_err, 0);
|
|
atomic_set(&lport->cmpl_ls_xb, 0);
|
|
atomic_set(&lport->cmpl_ls_err, 0);
|
|
atomic_set(&lport->fc4NvmeLsRequests, 0);
|
|
atomic_set(&lport->fc4NvmeLsCmpls, 0);
|
|
|
|
for (i = 0; i < phba->cfg_nvme_io_channel; i++) {
|
|
cstat = &lport->cstat[i];
|
|
atomic_set(&cstat->fc4NvmeInputRequests, 0);
|
|
atomic_set(&cstat->fc4NvmeOutputRequests, 0);
|
|
atomic_set(&cstat->fc4NvmeControlRequests, 0);
|
|
atomic_set(&cstat->fc4NvmeIoCmpls, 0);
|
|
}
|
|
|
|
/* Don't post more new bufs if repost already recovered
|
|
* the nvme sgls.
|
|
*/
|
|
if (phba->sli4_hba.nvme_xri_cnt == 0) {
|
|
len = lpfc_new_nvme_buf(vport,
|
|
phba->sli4_hba.nvme_xri_max);
|
|
vport->phba->total_nvme_bufs += len;
|
|
}
|
|
} else {
|
|
kfree(cstat);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
/* lpfc_nvme_lport_unreg_wait - Wait for the host to complete an lport unreg.
|
|
*
|
|
* The driver has to wait for the host nvme transport to callback
|
|
* indicating the localport has successfully unregistered all
|
|
* resources. Since this is an uninterruptible wait, loop every ten
|
|
* seconds and print a message indicating no progress.
|
|
*
|
|
* An uninterruptible wait is used because of the risk of transport-to-
|
|
* driver state mismatch.
|
|
*/
|
|
void
|
|
lpfc_nvme_lport_unreg_wait(struct lpfc_vport *vport,
|
|
struct lpfc_nvme_lport *lport)
|
|
{
|
|
#if (IS_ENABLED(CONFIG_NVME_FC))
|
|
u32 wait_tmo;
|
|
int ret;
|
|
|
|
/* Host transport has to clean up and confirm requiring an indefinite
|
|
* wait. Print a message if a 10 second wait expires and renew the
|
|
* wait. This is unexpected.
|
|
*/
|
|
wait_tmo = msecs_to_jiffies(LPFC_NVME_WAIT_TMO * 1000);
|
|
while (true) {
|
|
ret = wait_for_completion_timeout(&lport->lport_unreg_done,
|
|
wait_tmo);
|
|
if (unlikely(!ret)) {
|
|
lpfc_printf_vlog(vport, KERN_ERR, LOG_NVME_IOERR,
|
|
"6176 Lport %p Localport %p wait "
|
|
"timed out. Renewing.\n",
|
|
lport, vport->localport);
|
|
continue;
|
|
}
|
|
break;
|
|
}
|
|
lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME_IOERR,
|
|
"6177 Lport %p Localport %p Complete Success\n",
|
|
lport, vport->localport);
|
|
#endif
|
|
}
|
|
|
|
/**
|
|
* lpfc_nvme_destroy_localport - Destroy lpfc_nvme bound to nvme transport.
|
|
* @pnvme: pointer to lpfc nvme data structure.
|
|
*
|
|
* This routine is invoked to destroy all lports bound to the phba.
|
|
* The lport memory was allocated by the nvme fc transport and is
|
|
* released there. This routine ensures all rports bound to the
|
|
* lport have been disconnected.
|
|
*
|
|
**/
|
|
void
|
|
lpfc_nvme_destroy_localport(struct lpfc_vport *vport)
|
|
{
|
|
#if (IS_ENABLED(CONFIG_NVME_FC))
|
|
struct nvme_fc_local_port *localport;
|
|
struct lpfc_nvme_lport *lport;
|
|
struct lpfc_nvme_ctrl_stat *cstat;
|
|
int ret;
|
|
|
|
if (vport->nvmei_support == 0)
|
|
return;
|
|
|
|
localport = vport->localport;
|
|
vport->localport = NULL;
|
|
lport = (struct lpfc_nvme_lport *)localport->private;
|
|
cstat = lport->cstat;
|
|
|
|
lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME,
|
|
"6011 Destroying NVME localport %p\n",
|
|
localport);
|
|
|
|
/* lport's rport list is clear. Unregister
|
|
* lport and release resources.
|
|
*/
|
|
init_completion(&lport->lport_unreg_done);
|
|
ret = nvme_fc_unregister_localport(localport);
|
|
|
|
/* Wait for completion. This either blocks
|
|
* indefinitely or succeeds
|
|
*/
|
|
lpfc_nvme_lport_unreg_wait(vport, lport);
|
|
kfree(cstat);
|
|
|
|
/* Regardless of the unregister upcall response, clear
|
|
* nvmei_support. All rports are unregistered and the
|
|
* driver will clean up.
|
|
*/
|
|
vport->nvmei_support = 0;
|
|
if (ret == 0) {
|
|
lpfc_printf_vlog(vport,
|
|
KERN_INFO, LOG_NVME_DISC,
|
|
"6009 Unregistered lport Success\n");
|
|
} else {
|
|
lpfc_printf_vlog(vport,
|
|
KERN_INFO, LOG_NVME_DISC,
|
|
"6010 Unregistered lport "
|
|
"Failed, status x%x\n",
|
|
ret);
|
|
}
|
|
#endif
|
|
}
|
|
|
|
void
|
|
lpfc_nvme_update_localport(struct lpfc_vport *vport)
|
|
{
|
|
#if (IS_ENABLED(CONFIG_NVME_FC))
|
|
struct nvme_fc_local_port *localport;
|
|
struct lpfc_nvme_lport *lport;
|
|
|
|
localport = vport->localport;
|
|
if (!localport) {
|
|
lpfc_printf_vlog(vport, KERN_WARNING, LOG_NVME,
|
|
"6710 Update NVME fail. No localport\n");
|
|
return;
|
|
}
|
|
lport = (struct lpfc_nvme_lport *)localport->private;
|
|
if (!lport) {
|
|
lpfc_printf_vlog(vport, KERN_WARNING, LOG_NVME,
|
|
"6171 Update NVME fail. localP %p, No lport\n",
|
|
localport);
|
|
return;
|
|
}
|
|
lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME,
|
|
"6012 Update NVME lport %p did x%x\n",
|
|
localport, vport->fc_myDID);
|
|
|
|
localport->port_id = vport->fc_myDID;
|
|
if (localport->port_id == 0)
|
|
localport->port_role = FC_PORT_ROLE_NVME_DISCOVERY;
|
|
else
|
|
localport->port_role = FC_PORT_ROLE_NVME_INITIATOR;
|
|
|
|
lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME_DISC,
|
|
"6030 bound lport %p to DID x%06x\n",
|
|
lport, localport->port_id);
|
|
#endif
|
|
}
|
|
|
|
int
|
|
lpfc_nvme_register_port(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp)
|
|
{
|
|
#if (IS_ENABLED(CONFIG_NVME_FC))
|
|
int ret = 0;
|
|
struct nvme_fc_local_port *localport;
|
|
struct lpfc_nvme_lport *lport;
|
|
struct lpfc_nvme_rport *rport;
|
|
struct lpfc_nvme_rport *oldrport;
|
|
struct nvme_fc_remote_port *remote_port;
|
|
struct nvme_fc_port_info rpinfo;
|
|
struct lpfc_nodelist *prev_ndlp;
|
|
|
|
lpfc_printf_vlog(ndlp->vport, KERN_INFO, LOG_NVME_DISC,
|
|
"6006 Register NVME PORT. DID x%06x nlptype x%x\n",
|
|
ndlp->nlp_DID, ndlp->nlp_type);
|
|
|
|
localport = vport->localport;
|
|
if (!localport)
|
|
return 0;
|
|
|
|
lport = (struct lpfc_nvme_lport *)localport->private;
|
|
|
|
/* NVME rports are not preserved across devloss.
|
|
* Just register this instance. Note, rpinfo->dev_loss_tmo
|
|
* is left 0 to indicate accept transport defaults. The
|
|
* driver communicates port role capabilities consistent
|
|
* with the PRLI response data.
|
|
*/
|
|
memset(&rpinfo, 0, sizeof(struct nvme_fc_port_info));
|
|
rpinfo.port_id = ndlp->nlp_DID;
|
|
if (ndlp->nlp_type & NLP_NVME_TARGET)
|
|
rpinfo.port_role |= FC_PORT_ROLE_NVME_TARGET;
|
|
if (ndlp->nlp_type & NLP_NVME_INITIATOR)
|
|
rpinfo.port_role |= FC_PORT_ROLE_NVME_INITIATOR;
|
|
|
|
if (ndlp->nlp_type & NLP_NVME_DISCOVERY)
|
|
rpinfo.port_role |= FC_PORT_ROLE_NVME_DISCOVERY;
|
|
|
|
rpinfo.port_name = wwn_to_u64(ndlp->nlp_portname.u.wwn);
|
|
rpinfo.node_name = wwn_to_u64(ndlp->nlp_nodename.u.wwn);
|
|
|
|
oldrport = lpfc_ndlp_get_nrport(ndlp);
|
|
if (!oldrport)
|
|
lpfc_nlp_get(ndlp);
|
|
|
|
ret = nvme_fc_register_remoteport(localport, &rpinfo, &remote_port);
|
|
if (!ret) {
|
|
/* If the ndlp already has an nrport, this is just
|
|
* a resume of the existing rport. Else this is a
|
|
* new rport.
|
|
*/
|
|
/* Guard against an unregister/reregister
|
|
* race that leaves the WAIT flag set.
|
|
*/
|
|
spin_lock_irq(&vport->phba->hbalock);
|
|
ndlp->upcall_flags &= ~NLP_WAIT_FOR_UNREG;
|
|
spin_unlock_irq(&vport->phba->hbalock);
|
|
rport = remote_port->private;
|
|
if (oldrport) {
|
|
if (oldrport == remote_port->private) {
|
|
/* Same remoteport. Just reuse. */
|
|
lpfc_printf_vlog(ndlp->vport, KERN_INFO,
|
|
LOG_NVME_DISC,
|
|
"6014 Rebinding lport to "
|
|
"remoteport %p wwpn 0x%llx, "
|
|
"Data: x%x x%x %p x%x x%06x\n",
|
|
remote_port,
|
|
remote_port->port_name,
|
|
remote_port->port_id,
|
|
remote_port->port_role,
|
|
ndlp,
|
|
ndlp->nlp_type,
|
|
ndlp->nlp_DID);
|
|
return 0;
|
|
}
|
|
prev_ndlp = rport->ndlp;
|
|
|
|
/* Sever the ndlp<->rport association
|
|
* before dropping the ndlp ref from
|
|
* register.
|
|
*/
|
|
spin_lock_irq(&vport->phba->hbalock);
|
|
ndlp->nrport = NULL;
|
|
ndlp->upcall_flags &= ~NLP_WAIT_FOR_UNREG;
|
|
spin_unlock_irq(&vport->phba->hbalock);
|
|
rport->ndlp = NULL;
|
|
rport->remoteport = NULL;
|
|
|
|
/* Reference only removed if previous NDLP is no longer
|
|
* active. It might be just a swap and removing the
|
|
* reference would cause a premature cleanup.
|
|
*/
|
|
if (prev_ndlp && prev_ndlp != ndlp) {
|
|
if ((!NLP_CHK_NODE_ACT(prev_ndlp)) ||
|
|
(!prev_ndlp->nrport))
|
|
lpfc_nlp_put(prev_ndlp);
|
|
}
|
|
}
|
|
|
|
/* Clean bind the rport to the ndlp. */
|
|
rport->remoteport = remote_port;
|
|
rport->lport = lport;
|
|
rport->ndlp = ndlp;
|
|
spin_lock_irq(&vport->phba->hbalock);
|
|
ndlp->nrport = rport;
|
|
spin_unlock_irq(&vport->phba->hbalock);
|
|
lpfc_printf_vlog(vport, KERN_INFO,
|
|
LOG_NVME_DISC | LOG_NODE,
|
|
"6022 Binding new rport to "
|
|
"lport %p Remoteport %p WWNN 0x%llx, "
|
|
"Rport WWPN 0x%llx DID "
|
|
"x%06x Role x%x, ndlp %p\n",
|
|
lport, remote_port,
|
|
rpinfo.node_name, rpinfo.port_name,
|
|
rpinfo.port_id, rpinfo.port_role,
|
|
ndlp);
|
|
} else {
|
|
lpfc_printf_vlog(vport, KERN_ERR,
|
|
LOG_NVME_DISC | LOG_NODE,
|
|
"6031 RemotePort Registration failed "
|
|
"err: %d, DID x%06x\n",
|
|
ret, ndlp->nlp_DID);
|
|
}
|
|
|
|
return ret;
|
|
#else
|
|
return 0;
|
|
#endif
|
|
}
|
|
|
|
/* lpfc_nvme_unregister_port - unbind the DID and port_role from this rport.
|
|
*
|
|
* There is no notion of Devloss or rport recovery from the current
|
|
* nvme_transport perspective. Loss of an rport just means IO cannot
|
|
* be sent and recovery is completely up to the initator.
|
|
* For now, the driver just unbinds the DID and port_role so that
|
|
* no further IO can be issued. Changes are planned for later.
|
|
*
|
|
* Notes - the ndlp reference count is not decremented here since
|
|
* since there is no nvme_transport api for devloss. Node ref count
|
|
* is only adjusted in driver unload.
|
|
*/
|
|
void
|
|
lpfc_nvme_unregister_port(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp)
|
|
{
|
|
#if (IS_ENABLED(CONFIG_NVME_FC))
|
|
int ret;
|
|
struct nvme_fc_local_port *localport;
|
|
struct lpfc_nvme_lport *lport;
|
|
struct lpfc_nvme_rport *rport;
|
|
struct nvme_fc_remote_port *remoteport;
|
|
|
|
localport = vport->localport;
|
|
|
|
/* This is fundamental error. The localport is always
|
|
* available until driver unload. Just exit.
|
|
*/
|
|
if (!localport)
|
|
return;
|
|
|
|
lport = (struct lpfc_nvme_lport *)localport->private;
|
|
if (!lport)
|
|
goto input_err;
|
|
|
|
rport = lpfc_ndlp_get_nrport(ndlp);
|
|
if (!rport)
|
|
goto input_err;
|
|
|
|
remoteport = rport->remoteport;
|
|
lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME_DISC,
|
|
"6033 Unreg nvme remoteport %p, portname x%llx, "
|
|
"port_id x%06x, portstate x%x port type x%x\n",
|
|
remoteport, remoteport->port_name,
|
|
remoteport->port_id, remoteport->port_state,
|
|
ndlp->nlp_type);
|
|
|
|
/* Sanity check ndlp type. Only call for NVME ports. Don't
|
|
* clear any rport state until the transport calls back.
|
|
*/
|
|
|
|
if (ndlp->nlp_type & NLP_NVME_TARGET) {
|
|
/* No concern about the role change on the nvme remoteport.
|
|
* The transport will update it.
|
|
*/
|
|
ndlp->upcall_flags |= NLP_WAIT_FOR_UNREG;
|
|
|
|
/* Don't let the host nvme transport keep sending keep-alives
|
|
* on this remoteport. Vport is unloading, no recovery. The
|
|
* return values is ignored. The upcall is a courtesy to the
|
|
* transport.
|
|
*/
|
|
if (vport->load_flag & FC_UNLOADING)
|
|
(void)nvme_fc_set_remoteport_devloss(remoteport, 0);
|
|
|
|
ret = nvme_fc_unregister_remoteport(remoteport);
|
|
if (ret != 0) {
|
|
lpfc_nlp_put(ndlp);
|
|
lpfc_printf_vlog(vport, KERN_ERR, LOG_NVME_DISC,
|
|
"6167 NVME unregister failed %d "
|
|
"port_state x%x\n",
|
|
ret, remoteport->port_state);
|
|
}
|
|
}
|
|
return;
|
|
|
|
input_err:
|
|
#endif
|
|
lpfc_printf_vlog(vport, KERN_ERR, LOG_NVME_DISC,
|
|
"6168 State error: lport %p, rport%p FCID x%06x\n",
|
|
vport->localport, ndlp->rport, ndlp->nlp_DID);
|
|
}
|
|
|
|
/**
|
|
* lpfc_sli4_nvme_xri_aborted - Fast-path process of NVME xri abort
|
|
* @phba: pointer to lpfc hba data structure.
|
|
* @axri: pointer to the fcp xri abort wcqe structure.
|
|
*
|
|
* This routine is invoked by the worker thread to process a SLI4 fast-path
|
|
* NVME aborted xri. Aborted NVME IO commands are completed to the transport
|
|
* here.
|
|
**/
|
|
void
|
|
lpfc_sli4_nvme_xri_aborted(struct lpfc_hba *phba,
|
|
struct sli4_wcqe_xri_aborted *axri)
|
|
{
|
|
uint16_t xri = bf_get(lpfc_wcqe_xa_xri, axri);
|
|
struct lpfc_nvme_buf *lpfc_ncmd, *next_lpfc_ncmd;
|
|
struct nvmefc_fcp_req *nvme_cmd = NULL;
|
|
struct lpfc_nodelist *ndlp;
|
|
unsigned long iflag = 0;
|
|
|
|
if (!(phba->cfg_enable_fc4_type & LPFC_ENABLE_NVME))
|
|
return;
|
|
spin_lock_irqsave(&phba->hbalock, iflag);
|
|
spin_lock(&phba->sli4_hba.abts_nvme_buf_list_lock);
|
|
list_for_each_entry_safe(lpfc_ncmd, next_lpfc_ncmd,
|
|
&phba->sli4_hba.lpfc_abts_nvme_buf_list,
|
|
list) {
|
|
if (lpfc_ncmd->cur_iocbq.sli4_xritag == xri) {
|
|
list_del_init(&lpfc_ncmd->list);
|
|
lpfc_ncmd->flags &= ~LPFC_SBUF_XBUSY;
|
|
lpfc_ncmd->status = IOSTAT_SUCCESS;
|
|
spin_unlock(
|
|
&phba->sli4_hba.abts_nvme_buf_list_lock);
|
|
|
|
spin_unlock_irqrestore(&phba->hbalock, iflag);
|
|
ndlp = lpfc_ncmd->ndlp;
|
|
if (ndlp)
|
|
lpfc_sli4_abts_err_handler(phba, ndlp, axri);
|
|
|
|
lpfc_printf_log(phba, KERN_INFO, LOG_NVME_ABTS,
|
|
"6311 nvme_cmd %p xri x%x tag x%x "
|
|
"abort complete and xri released\n",
|
|
lpfc_ncmd->nvmeCmd, xri,
|
|
lpfc_ncmd->cur_iocbq.iotag);
|
|
|
|
/* Aborted NVME commands are required to not complete
|
|
* before the abort exchange command fully completes.
|
|
* Once completed, it is available via the put list.
|
|
*/
|
|
if (lpfc_ncmd->nvmeCmd) {
|
|
nvme_cmd = lpfc_ncmd->nvmeCmd;
|
|
nvme_cmd->done(nvme_cmd);
|
|
lpfc_ncmd->nvmeCmd = NULL;
|
|
}
|
|
lpfc_release_nvme_buf(phba, lpfc_ncmd);
|
|
return;
|
|
}
|
|
}
|
|
spin_unlock(&phba->sli4_hba.abts_nvme_buf_list_lock);
|
|
spin_unlock_irqrestore(&phba->hbalock, iflag);
|
|
|
|
lpfc_printf_log(phba, KERN_INFO, LOG_NVME_ABTS,
|
|
"6312 XRI Aborted xri x%x not found\n", xri);
|
|
|
|
}
|
|
|
|
/**
|
|
* lpfc_nvme_wait_for_io_drain - Wait for all NVME wqes to complete
|
|
* @phba: Pointer to HBA context object.
|
|
*
|
|
* This function flushes all wqes in the nvme rings and frees all resources
|
|
* in the txcmplq. This function does not issue abort wqes for the IO
|
|
* commands in txcmplq, they will just be returned with
|
|
* IOERR_SLI_DOWN. This function is invoked with EEH when device's PCI
|
|
* slot has been permanently disabled.
|
|
**/
|
|
void
|
|
lpfc_nvme_wait_for_io_drain(struct lpfc_hba *phba)
|
|
{
|
|
struct lpfc_sli_ring *pring;
|
|
u32 i, wait_cnt = 0;
|
|
|
|
if (phba->sli_rev < LPFC_SLI_REV4)
|
|
return;
|
|
|
|
/* Cycle through all NVME rings and make sure all outstanding
|
|
* WQEs have been removed from the txcmplqs.
|
|
*/
|
|
for (i = 0; i < phba->cfg_nvme_io_channel; i++) {
|
|
pring = phba->sli4_hba.nvme_wq[i]->pring;
|
|
|
|
/* Retrieve everything on the txcmplq */
|
|
while (!list_empty(&pring->txcmplq)) {
|
|
msleep(LPFC_XRI_EXCH_BUSY_WAIT_T1);
|
|
wait_cnt++;
|
|
|
|
/* The sleep is 10mS. Every ten seconds,
|
|
* dump a message. Something is wrong.
|
|
*/
|
|
if ((wait_cnt % 1000) == 0) {
|
|
lpfc_printf_log(phba, KERN_ERR, LOG_NVME_IOERR,
|
|
"6178 NVME IO not empty, "
|
|
"cnt %d\n", wait_cnt);
|
|
}
|
|
}
|
|
}
|
|
}
|