linux/drivers/ata/pata_sch.c

/*
 *  pata_sch.c - Intel SCH PATA controllers
 *
 *  Copyright (c) 2008 Alek Du <alek.du@intel.com>
 *
 *  This program is free software; you can redistribute it and/or modify
 *  it under the terms of the GNU General Public License 2 as published
 *  by the Free Software Foundation.
 *
 *  This program is distributed in the hope that it will be useful,
 *  but WITHOUT ANY WARRANTY; without even the implied warranty of
 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *  GNU General Public License for more details.
 *
 *  You should have received a copy of the GNU General Public License
 *  along with this program; see the file COPYING.  If not, write to
 *  the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
 *
 */

/*
 *  Supports:
 *    Intel SCH (AF82US15W, AF82US15L, AF82UL11L) chipsets -- see spec at:
 *    http://download.intel.com/design/chipsets/embedded/datashts/319537.pdf
 */

#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/device.h>
#include <scsi/scsi_host.h>
#include <linux/libata.h>
#include <linux/dmi.h>

#define DRV_NAME	"pata_sch"
#define DRV_VERSION	"0.2"

/* see SCH datasheet page 351 */
enum {
	D0TIM	= 0x80,		/* Device 0 Timing Register */
	D1TIM	= 0x84,		/* Device 1 Timing Register */
	PM	= 0x07,		/* PIO Mode Bit Mask */
	MDM	= (0x03 << 8),	/* Multi-word DMA Mode Bit Mask */
	UDM	= (0x07 << 16), /* Ultra DMA Mode Bit Mask */
	PPE	= (1 << 30),	/* Prefetch/Post Enable */
	USD	= (1 << 31),	/* Use Synchronous DMA */
};

static int sch_init_one(struct pci_dev *pdev,
			 const struct pci_device_id *ent);
static void sch_set_piomode(struct ata_port *ap, struct ata_device *adev);
static void sch_set_dmamode(struct ata_port *ap, struct ata_device *adev);

static const struct pci_device_id sch_pci_tbl[] = {
	/* Intel SCH PATA Controller */
	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_SCH_IDE), 0 },
	{ }	/* terminate list */
};

static struct pci_driver sch_pci_driver = {
	.name			= DRV_NAME,
	.id_table		= sch_pci_tbl,
	.probe			= sch_init_one,
	.remove			= ata_pci_remove_one,
#ifdef CONFIG_PM
	.suspend		= ata_pci_device_suspend,
	.resume			= ata_pci_device_resume,
#endif
};

static struct scsi_host_template sch_sht = {
	ATA_BMDMA_SHT(DRV_NAME),
};

static struct ata_port_operations sch_pata_ops = {
	.inherits		= &ata_bmdma_port_ops,
	.cable_detect		= ata_cable_unknown,
	.set_piomode		= sch_set_piomode,
	.set_dmamode		= sch_set_dmamode,
};

static struct ata_port_info sch_port_info = {
	.flags		= ATA_FLAG_SLAVE_POSS,
	.pio_mask	= ATA_PIO4,
	.mwdma_mask	= ATA_MWDMA2,
	.udma_mask	= ATA_UDMA5,
	.port_ops	= &sch_pata_ops,
};

MODULE_AUTHOR("Alek Du <alek.du@intel.com>");
MODULE_DESCRIPTION("SCSI low-level driver for Intel SCH PATA controllers");
MODULE_LICENSE("GPL");
MODULE_DEVICE_TABLE(pci, sch_pci_tbl);
MODULE_VERSION(DRV_VERSION);

/**
 *	sch_set_piomode - Initialize host controller PATA PIO timings
 *	@ap: Port whose timings we are configuring
 *	@adev: ATA device
 *
 *	Set PIO mode for device, in host controller PCI config space.
 *
 *	LOCKING:
 *	None (inherited from caller).
 */

static void sch_set_piomode(struct ata_port *ap, struct ata_device *adev)
{
	unsigned int pio	= adev->pio_mode - XFER_PIO_0;
	struct pci_dev *dev	= to_pci_dev(ap->host->dev);
	unsigned int port	= adev->devno ? D1TIM : D0TIM;
	unsigned int data;

	pci_read_config_dword(dev, port, &data);
	/* see SCH datasheet page 351 */
	/* set PIO mode */
	data &= ~(PM | PPE);
	data |= pio;
	/* enable PPE for block device */
	if (adev->class == ATA_DEV_ATA)
		data |= PPE;
	pci_write_config_dword(dev, port, data);
}

/**
 *	sch_set_dmamode - Initialize host controller PATA DMA timings
 *	@ap: Port whose timings we are configuring
 *	@adev: ATA device
 *
 *	Set MW/UDMA mode for device, in host controller PCI config space.
 *
 *	LOCKING:
 *	None (inherited from caller).
 */

static void sch_set_dmamode(struct ata_port *ap, struct ata_device *adev)
{
	unsigned int dma_mode	= adev->dma_mode;
	struct pci_dev *dev	= to_pci_dev(ap->host->dev);
	unsigned int port	= adev->devno ? D1TIM : D0TIM;
	unsigned int data;

	pci_read_config_dword(dev, port, &data);
	/* see SCH datasheet page 351 */
	if (dma_mode >= XFER_UDMA_0) {
		/* enable Synchronous DMA mode */
		data |= USD;
		data &= ~UDM;
		data |= (dma_mode - XFER_UDMA_0) << 16;
	} else { /* must be MWDMA mode, since we masked SWDMA already */
		data &= ~(USD | MDM);
		data |= (dma_mode - XFER_MW_DMA_0) << 8;
	}
	pci_write_config_dword(dev, port, data);
}

/**
 *	sch_init_one - Register SCH ATA PCI device with kernel services
 *	@pdev: PCI device to register
 *	@ent: Entry in sch_pci_tbl matching with @pdev
 *
 *	LOCKING:
 *	Inherited from PCI layer (may sleep).
 *
 *	RETURNS:
 *	Zero on success, or -ERRNO value.
 */

static int sch_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
{
	const struct ata_port_info *ppi[] = { &sch_port_info, NULL };

	ata_print_version_once(&pdev->dev, DRV_VERSION);

	return ata_pci_bmdma_init_one(pdev, ppi, &sch_sht, NULL, 0);
}

module_pci_driver(sch_pci_driver);