mirror of
https://github.com/torvalds/linux.git
synced 2024-11-05 11:32:04 +00:00
c8ac32e471
The Texas Instruments TMP121 is a SPI temperature sensor very similar to the LM70, with slightly higher resolution. This patch extends the LM70 driver to support the TMP121. The TMP123 differs in pin assign- ment. Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
42 lines
1.4 KiB
Plaintext
42 lines
1.4 KiB
Plaintext
Kernel driver lm70
|
|
==================
|
|
|
|
Supported chips:
|
|
* National Semiconductor LM70
|
|
Datasheet: http://www.national.com/pf/LM/LM70.html
|
|
* Texas Instruments TMP121/TMP123
|
|
Information: http://focus.ti.com/docs/prod/folders/print/tmp121.html
|
|
|
|
Author:
|
|
Kaiwan N Billimoria <kaiwan@designergraphix.com>
|
|
|
|
Description
|
|
-----------
|
|
|
|
This driver implements support for the National Semiconductor LM70
|
|
temperature sensor.
|
|
|
|
The LM70 temperature sensor chip supports a single temperature sensor.
|
|
It communicates with a host processor (or microcontroller) via an
|
|
SPI/Microwire Bus interface.
|
|
|
|
Communication with the LM70 is simple: when the temperature is to be sensed,
|
|
the driver accesses the LM70 using SPI communication: 16 SCLK cycles
|
|
comprise the MOSI/MISO loop. At the end of the transfer, the 11-bit 2's
|
|
complement digital temperature (sent via the SIO line), is available in the
|
|
driver for interpretation. This driver makes use of the kernel's in-core
|
|
SPI support.
|
|
|
|
As a real (in-tree) example of this "SPI protocol driver" interfacing
|
|
with a "SPI master controller driver", see drivers/spi/spi_lm70llp.c
|
|
and its associated documentation.
|
|
|
|
The TMP121/TMP123 are very similar; main differences are 4 wire SPI inter-
|
|
face (read only) and 13-bit temperature data (0.0625 degrees celsius reso-
|
|
lution).
|
|
|
|
Thanks to
|
|
---------
|
|
Jean Delvare <khali@linux-fr.org> for mentoring the hwmon-side driver
|
|
development.
|