Andreas Klinger c3b2fdd0ea iio: adc: hx711: Add IIO driver for AVIA HX711 ... This is the IIO driver for AVIA HX711 ADC which is mostly used in weighting cells. The protocol is quite simple and using GPIOs: One GPIO is used as clock (SCK) while another GPIO is read (DOUT) The raw value read from the chip is delivered. To get a weight one needs to subtract the zero offset and scale it. Signed-off-by: Andreas Klinger <ak@it-klinger.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>		2017-01-10 19:54:59 +00:00
..
accel	iio:kfifo_buf header include push down.	2017-01-10 19:54:53 +00:00
adc	iio: adc: hx711: Add IIO driver for AVIA HX711	2017-01-10 19:54:59 +00:00
amplifiers
buffer	iio:buffer.h - split into buffer.h and buffer_impl.h	2017-01-10 19:54:55 +00:00
chemical	iio:chemical:atlas-ph-sensor: Fix use of 32 bit int to hold 16 bit big endian value	2016-10-23 22:18:27 +01:00
common	iio:kfifo_buf header include push down.	2017-01-10 19:54:53 +00:00
counter	iio: 104-quad-8: Add IIO support for the ACCES 104-QUAD-8	2016-10-01 17:06:21 +01:00
dac	iio: dac: ad5593r: Add ACPI support	2016-12-30 17:20:14 +00:00
dummy	iio:dummy: Stop enabling timestamp by default.	2017-01-10 19:54:55 +00:00
frequency	iio: frequency: ad9523: use unsigned int rather then bare unsigned	2016-04-17 10:31:03 +01:00
gyro	iio:kfifo_buf header include push down.	2017-01-10 19:54:53 +00:00
health	First round of IIO new device support, features and cleanups for the 4.8 cycle.	2016-06-09 09:15:58 -07:00
humidity	iio: humidity: Support acpi probe for hts211	2016-12-03 08:56:28 +00:00
imu	iio: bmi160: Add of device table for spi	2016-12-30 10:38:19 +00:00
light	iio: light: add driver for Capella CM3605	2016-12-30 17:17:39 +00:00
magnetometer	iio: magnetometer: separate the values of attributes based on their usage type for HID compass sensor	2016-11-24 20:41:30 +00:00
orientation	iio: orientation: hid-sensor-rotation: Add PM function (fix non working driver)	2016-11-05 17:47:47 +00:00
potentiometer	iio: mcp4531: provide range of available raw values	2016-11-13 11:40:26 +00:00
potentiostat	iio: potentiostat: add LMP91000 support	2016-09-27 20:33:03 +01:00
pressure	iio: st_pressure: Export sampling frequency for lps25h and lps331ap	2016-12-30 11:33:56 +00:00
proximity	iio: pulsedlight-lidar-lite-v2: add lidar-lite-v3 property	2016-12-31 15:18:31 +00:00
temperature	iio: maxim_thermocouple: detect invalid storage size in read()	2016-11-13 10:08:32 +01:00
trigger	iio:trigger: Experimental kthread tight loop trigger (thread only)	2016-06-03 13:18:44 +01:00
iio_core_trigger.h
iio_core.h	iio:core: timestamping clock selection support	2016-06-30 19:41:38 +01:00
industrialio-buffer.c	iio:buffer.h - split into buffer.h and buffer_impl.h	2017-01-10 19:54:55 +00:00
industrialio-configfs.c
industrialio-core.c	iio:buffer.h - split into buffer.h and buffer_impl.h	2017-01-10 19:54:55 +00:00
industrialio-event.c	iio: iio_push_event(): Don't crash if the event interface is not registered	2016-09-10 16:40:44 +01:00
industrialio-sw-device.c	iio: Add support for creating IIO devices via configfs	2016-05-04 11:43:54 +01:00
industrialio-sw-trigger.c	iio: core: fix ptr_ret.cocci warnings	2016-01-20 17:09:18 -08:00
industrialio-trigger.c	iio:trigger: Add helper function to verify that a trigger belongs to the same device	2016-09-27 20:32:55 +01:00
industrialio-triggered-event.c
inkern.c	iio: inkern: add helpers to query available values from channels	2016-11-13 11:40:26 +00:00
Kconfig	iio: 104-quad-8: Add IIO support for the ACCES 104-QUAD-8	2016-10-01 17:06:21 +01:00
Makefile	iio: 104-quad-8: Add IIO support for the ACCES 104-QUAD-8	2016-10-01 17:06:21 +01:00