mirror of
https://github.com/torvalds/linux.git
synced 2024-12-02 09:01:34 +00:00
2ff4e003e8
Use the dev_err_probe() helper, instead of open-coding the same operation. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/20211214020843.2225831-17-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
511 lines
13 KiB
C
511 lines
13 KiB
C
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
|
|
//
|
|
// Copyright (c) 2018 BayLibre, SAS.
|
|
// Author: Jerome Brunet <jbrunet@baylibre.com>
|
|
|
|
#include <linux/bitfield.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of_platform.h>
|
|
#include <linux/regmap.h>
|
|
#include <sound/soc.h>
|
|
#include <sound/soc-dai.h>
|
|
#include <sound/pcm_params.h>
|
|
|
|
#define SPDIFIN_CTRL0 0x00
|
|
#define SPDIFIN_CTRL0_EN BIT(31)
|
|
#define SPDIFIN_CTRL0_RST_OUT BIT(29)
|
|
#define SPDIFIN_CTRL0_RST_IN BIT(28)
|
|
#define SPDIFIN_CTRL0_WIDTH_SEL BIT(24)
|
|
#define SPDIFIN_CTRL0_STATUS_CH_SHIFT 11
|
|
#define SPDIFIN_CTRL0_STATUS_SEL GENMASK(10, 8)
|
|
#define SPDIFIN_CTRL0_SRC_SEL GENMASK(5, 4)
|
|
#define SPDIFIN_CTRL0_CHK_VALID BIT(3)
|
|
#define SPDIFIN_CTRL1 0x04
|
|
#define SPDIFIN_CTRL1_BASE_TIMER GENMASK(19, 0)
|
|
#define SPDIFIN_CTRL1_IRQ_MASK GENMASK(27, 20)
|
|
#define SPDIFIN_CTRL2 0x08
|
|
#define SPDIFIN_THRES_PER_REG 3
|
|
#define SPDIFIN_THRES_WIDTH 10
|
|
#define SPDIFIN_CTRL3 0x0c
|
|
#define SPDIFIN_CTRL4 0x10
|
|
#define SPDIFIN_TIMER_PER_REG 4
|
|
#define SPDIFIN_TIMER_WIDTH 8
|
|
#define SPDIFIN_CTRL5 0x14
|
|
#define SPDIFIN_CTRL6 0x18
|
|
#define SPDIFIN_STAT0 0x1c
|
|
#define SPDIFIN_STAT0_MODE GENMASK(30, 28)
|
|
#define SPDIFIN_STAT0_MAXW GENMASK(17, 8)
|
|
#define SPDIFIN_STAT0_IRQ GENMASK(7, 0)
|
|
#define SPDIFIN_IRQ_MODE_CHANGED BIT(2)
|
|
#define SPDIFIN_STAT1 0x20
|
|
#define SPDIFIN_STAT2 0x24
|
|
#define SPDIFIN_MUTE_VAL 0x28
|
|
|
|
#define SPDIFIN_MODE_NUM 7
|
|
|
|
struct axg_spdifin_cfg {
|
|
const unsigned int *mode_rates;
|
|
unsigned int ref_rate;
|
|
};
|
|
|
|
struct axg_spdifin {
|
|
const struct axg_spdifin_cfg *conf;
|
|
struct regmap *map;
|
|
struct clk *refclk;
|
|
struct clk *pclk;
|
|
};
|
|
|
|
/*
|
|
* TODO:
|
|
* It would have been nice to check the actual rate against the sample rate
|
|
* requested in hw_params(). Unfortunately, I was not able to make the mode
|
|
* detection and IRQ work reliably:
|
|
*
|
|
* 1. IRQs are generated on mode change only, so there is no notification
|
|
* on transition between no signal and mode 0 (32kHz).
|
|
* 2. Mode detection very often has glitches, and may detects the
|
|
* lowest or the highest mode before zeroing in on the actual mode.
|
|
*
|
|
* This makes calling snd_pcm_stop() difficult to get right. Even notifying
|
|
* the kcontrol would be very unreliable at this point.
|
|
* Let's keep things simple until the magic spell that makes this work is
|
|
* found.
|
|
*/
|
|
|
|
static unsigned int axg_spdifin_get_rate(struct axg_spdifin *priv)
|
|
{
|
|
unsigned int stat, mode, rate = 0;
|
|
|
|
regmap_read(priv->map, SPDIFIN_STAT0, &stat);
|
|
mode = FIELD_GET(SPDIFIN_STAT0_MODE, stat);
|
|
|
|
/*
|
|
* If max width is zero, we are not capturing anything.
|
|
* Also Sometimes, when the capture is on but there is no data,
|
|
* mode is SPDIFIN_MODE_NUM, but not always ...
|
|
*/
|
|
if (FIELD_GET(SPDIFIN_STAT0_MAXW, stat) &&
|
|
mode < SPDIFIN_MODE_NUM)
|
|
rate = priv->conf->mode_rates[mode];
|
|
|
|
return rate;
|
|
}
|
|
|
|
static int axg_spdifin_prepare(struct snd_pcm_substream *substream,
|
|
struct snd_soc_dai *dai)
|
|
{
|
|
struct axg_spdifin *priv = snd_soc_dai_get_drvdata(dai);
|
|
|
|
/* Apply both reset */
|
|
regmap_update_bits(priv->map, SPDIFIN_CTRL0,
|
|
SPDIFIN_CTRL0_RST_OUT |
|
|
SPDIFIN_CTRL0_RST_IN,
|
|
0);
|
|
|
|
/* Clear out reset before in reset */
|
|
regmap_update_bits(priv->map, SPDIFIN_CTRL0,
|
|
SPDIFIN_CTRL0_RST_OUT, SPDIFIN_CTRL0_RST_OUT);
|
|
regmap_update_bits(priv->map, SPDIFIN_CTRL0,
|
|
SPDIFIN_CTRL0_RST_IN, SPDIFIN_CTRL0_RST_IN);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int axg_spdifin_startup(struct snd_pcm_substream *substream,
|
|
struct snd_soc_dai *dai)
|
|
{
|
|
struct axg_spdifin *priv = snd_soc_dai_get_drvdata(dai);
|
|
int ret;
|
|
|
|
ret = clk_prepare_enable(priv->refclk);
|
|
if (ret) {
|
|
dev_err(dai->dev,
|
|
"failed to enable spdifin reference clock\n");
|
|
return ret;
|
|
}
|
|
|
|
regmap_update_bits(priv->map, SPDIFIN_CTRL0, SPDIFIN_CTRL0_EN,
|
|
SPDIFIN_CTRL0_EN);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void axg_spdifin_shutdown(struct snd_pcm_substream *substream,
|
|
struct snd_soc_dai *dai)
|
|
{
|
|
struct axg_spdifin *priv = snd_soc_dai_get_drvdata(dai);
|
|
|
|
regmap_update_bits(priv->map, SPDIFIN_CTRL0, SPDIFIN_CTRL0_EN, 0);
|
|
clk_disable_unprepare(priv->refclk);
|
|
}
|
|
|
|
static void axg_spdifin_write_mode_param(struct regmap *map, int mode,
|
|
unsigned int val,
|
|
unsigned int num_per_reg,
|
|
unsigned int base_reg,
|
|
unsigned int width)
|
|
{
|
|
uint64_t offset = mode;
|
|
unsigned int reg, shift, rem;
|
|
|
|
rem = do_div(offset, num_per_reg);
|
|
|
|
reg = offset * regmap_get_reg_stride(map) + base_reg;
|
|
shift = width * (num_per_reg - 1 - rem);
|
|
|
|
regmap_update_bits(map, reg, GENMASK(width - 1, 0) << shift,
|
|
val << shift);
|
|
}
|
|
|
|
static void axg_spdifin_write_timer(struct regmap *map, int mode,
|
|
unsigned int val)
|
|
{
|
|
axg_spdifin_write_mode_param(map, mode, val, SPDIFIN_TIMER_PER_REG,
|
|
SPDIFIN_CTRL4, SPDIFIN_TIMER_WIDTH);
|
|
}
|
|
|
|
static void axg_spdifin_write_threshold(struct regmap *map, int mode,
|
|
unsigned int val)
|
|
{
|
|
axg_spdifin_write_mode_param(map, mode, val, SPDIFIN_THRES_PER_REG,
|
|
SPDIFIN_CTRL2, SPDIFIN_THRES_WIDTH);
|
|
}
|
|
|
|
static unsigned int axg_spdifin_mode_timer(struct axg_spdifin *priv,
|
|
int mode,
|
|
unsigned int rate)
|
|
{
|
|
/*
|
|
* Number of period of the reference clock during a period of the
|
|
* input signal reference clock
|
|
*/
|
|
return rate / (128 * priv->conf->mode_rates[mode]);
|
|
}
|
|
|
|
static int axg_spdifin_sample_mode_config(struct snd_soc_dai *dai,
|
|
struct axg_spdifin *priv)
|
|
{
|
|
unsigned int rate, t_next;
|
|
int ret, i = SPDIFIN_MODE_NUM - 1;
|
|
|
|
/* Set spdif input reference clock */
|
|
ret = clk_set_rate(priv->refclk, priv->conf->ref_rate);
|
|
if (ret) {
|
|
dev_err(dai->dev, "reference clock rate set failed\n");
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* The rate actually set might be slightly different, get
|
|
* the actual rate for the following mode calculation
|
|
*/
|
|
rate = clk_get_rate(priv->refclk);
|
|
|
|
/* HW will update mode every 1ms */
|
|
regmap_update_bits(priv->map, SPDIFIN_CTRL1,
|
|
SPDIFIN_CTRL1_BASE_TIMER,
|
|
FIELD_PREP(SPDIFIN_CTRL1_BASE_TIMER, rate / 1000));
|
|
|
|
/* Threshold based on the minimum width between two edges */
|
|
regmap_update_bits(priv->map, SPDIFIN_CTRL0,
|
|
SPDIFIN_CTRL0_WIDTH_SEL, SPDIFIN_CTRL0_WIDTH_SEL);
|
|
|
|
/* Calculate the last timer which has no threshold */
|
|
t_next = axg_spdifin_mode_timer(priv, i, rate);
|
|
axg_spdifin_write_timer(priv->map, i, t_next);
|
|
|
|
do {
|
|
unsigned int t;
|
|
|
|
i -= 1;
|
|
|
|
/* Calculate the timer */
|
|
t = axg_spdifin_mode_timer(priv, i, rate);
|
|
|
|
/* Set the timer value */
|
|
axg_spdifin_write_timer(priv->map, i, t);
|
|
|
|
/* Set the threshold value */
|
|
axg_spdifin_write_threshold(priv->map, i, t + t_next);
|
|
|
|
/* Save the current timer for the next threshold calculation */
|
|
t_next = t;
|
|
|
|
} while (i > 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int axg_spdifin_dai_probe(struct snd_soc_dai *dai)
|
|
{
|
|
struct axg_spdifin *priv = snd_soc_dai_get_drvdata(dai);
|
|
int ret;
|
|
|
|
ret = clk_prepare_enable(priv->pclk);
|
|
if (ret) {
|
|
dev_err(dai->dev, "failed to enable pclk\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = axg_spdifin_sample_mode_config(dai, priv);
|
|
if (ret) {
|
|
dev_err(dai->dev, "mode configuration failed\n");
|
|
clk_disable_unprepare(priv->pclk);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int axg_spdifin_dai_remove(struct snd_soc_dai *dai)
|
|
{
|
|
struct axg_spdifin *priv = snd_soc_dai_get_drvdata(dai);
|
|
|
|
clk_disable_unprepare(priv->pclk);
|
|
return 0;
|
|
}
|
|
|
|
static const struct snd_soc_dai_ops axg_spdifin_ops = {
|
|
.prepare = axg_spdifin_prepare,
|
|
.startup = axg_spdifin_startup,
|
|
.shutdown = axg_spdifin_shutdown,
|
|
};
|
|
|
|
static int axg_spdifin_iec958_info(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_info *uinfo)
|
|
{
|
|
uinfo->type = SNDRV_CTL_ELEM_TYPE_IEC958;
|
|
uinfo->count = 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int axg_spdifin_get_status_mask(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < 24; i++)
|
|
ucontrol->value.iec958.status[i] = 0xff;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int axg_spdifin_get_status(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct snd_soc_component *c = snd_kcontrol_chip(kcontrol);
|
|
struct axg_spdifin *priv = snd_soc_component_get_drvdata(c);
|
|
int i, j;
|
|
|
|
for (i = 0; i < 6; i++) {
|
|
unsigned int val;
|
|
|
|
regmap_update_bits(priv->map, SPDIFIN_CTRL0,
|
|
SPDIFIN_CTRL0_STATUS_SEL,
|
|
FIELD_PREP(SPDIFIN_CTRL0_STATUS_SEL, i));
|
|
|
|
regmap_read(priv->map, SPDIFIN_STAT1, &val);
|
|
|
|
for (j = 0; j < 4; j++) {
|
|
unsigned int offset = i * 4 + j;
|
|
|
|
ucontrol->value.iec958.status[offset] =
|
|
(val >> (j * 8)) & 0xff;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#define AXG_SPDIFIN_IEC958_MASK \
|
|
{ \
|
|
.access = SNDRV_CTL_ELEM_ACCESS_READ, \
|
|
.iface = SNDRV_CTL_ELEM_IFACE_PCM, \
|
|
.name = SNDRV_CTL_NAME_IEC958("", CAPTURE, MASK), \
|
|
.info = axg_spdifin_iec958_info, \
|
|
.get = axg_spdifin_get_status_mask, \
|
|
}
|
|
|
|
#define AXG_SPDIFIN_IEC958_STATUS \
|
|
{ \
|
|
.access = (SNDRV_CTL_ELEM_ACCESS_READ | \
|
|
SNDRV_CTL_ELEM_ACCESS_VOLATILE), \
|
|
.iface = SNDRV_CTL_ELEM_IFACE_PCM, \
|
|
.name = SNDRV_CTL_NAME_IEC958("", CAPTURE, NONE), \
|
|
.info = axg_spdifin_iec958_info, \
|
|
.get = axg_spdifin_get_status, \
|
|
}
|
|
|
|
static const char * const spdifin_chsts_src_texts[] = {
|
|
"A", "B",
|
|
};
|
|
|
|
static SOC_ENUM_SINGLE_DECL(axg_spdifin_chsts_src_enum, SPDIFIN_CTRL0,
|
|
SPDIFIN_CTRL0_STATUS_CH_SHIFT,
|
|
spdifin_chsts_src_texts);
|
|
|
|
static int axg_spdifin_rate_lock_info(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_info *uinfo)
|
|
{
|
|
uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
|
|
uinfo->count = 1;
|
|
uinfo->value.integer.min = 0;
|
|
uinfo->value.integer.max = 192000;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int axg_spdifin_rate_lock_get(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct snd_soc_component *c = snd_kcontrol_chip(kcontrol);
|
|
struct axg_spdifin *priv = snd_soc_component_get_drvdata(c);
|
|
|
|
ucontrol->value.integer.value[0] = axg_spdifin_get_rate(priv);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#define AXG_SPDIFIN_LOCK_RATE(xname) \
|
|
{ \
|
|
.iface = SNDRV_CTL_ELEM_IFACE_PCM, \
|
|
.access = (SNDRV_CTL_ELEM_ACCESS_READ | \
|
|
SNDRV_CTL_ELEM_ACCESS_VOLATILE), \
|
|
.get = axg_spdifin_rate_lock_get, \
|
|
.info = axg_spdifin_rate_lock_info, \
|
|
.name = xname, \
|
|
}
|
|
|
|
static const struct snd_kcontrol_new axg_spdifin_controls[] = {
|
|
AXG_SPDIFIN_LOCK_RATE("Capture Rate Lock"),
|
|
SOC_DOUBLE("Capture Switch", SPDIFIN_CTRL0, 7, 6, 1, 1),
|
|
SOC_ENUM(SNDRV_CTL_NAME_IEC958("", CAPTURE, NONE) "Src",
|
|
axg_spdifin_chsts_src_enum),
|
|
AXG_SPDIFIN_IEC958_MASK,
|
|
AXG_SPDIFIN_IEC958_STATUS,
|
|
};
|
|
|
|
static const struct snd_soc_component_driver axg_spdifin_component_drv = {
|
|
.controls = axg_spdifin_controls,
|
|
.num_controls = ARRAY_SIZE(axg_spdifin_controls),
|
|
};
|
|
|
|
static const struct regmap_config axg_spdifin_regmap_cfg = {
|
|
.reg_bits = 32,
|
|
.val_bits = 32,
|
|
.reg_stride = 4,
|
|
.max_register = SPDIFIN_MUTE_VAL,
|
|
};
|
|
|
|
static const unsigned int axg_spdifin_mode_rates[SPDIFIN_MODE_NUM] = {
|
|
32000, 44100, 48000, 88200, 96000, 176400, 192000,
|
|
};
|
|
|
|
static const struct axg_spdifin_cfg axg_cfg = {
|
|
.mode_rates = axg_spdifin_mode_rates,
|
|
.ref_rate = 333333333,
|
|
};
|
|
|
|
static const struct of_device_id axg_spdifin_of_match[] = {
|
|
{
|
|
.compatible = "amlogic,axg-spdifin",
|
|
.data = &axg_cfg,
|
|
}, {}
|
|
};
|
|
MODULE_DEVICE_TABLE(of, axg_spdifin_of_match);
|
|
|
|
static struct snd_soc_dai_driver *
|
|
axg_spdifin_get_dai_drv(struct device *dev, struct axg_spdifin *priv)
|
|
{
|
|
struct snd_soc_dai_driver *drv;
|
|
int i;
|
|
|
|
drv = devm_kzalloc(dev, sizeof(*drv), GFP_KERNEL);
|
|
if (!drv)
|
|
return ERR_PTR(-ENOMEM);
|
|
|
|
drv->name = "SPDIF Input";
|
|
drv->ops = &axg_spdifin_ops;
|
|
drv->probe = axg_spdifin_dai_probe;
|
|
drv->remove = axg_spdifin_dai_remove;
|
|
drv->capture.stream_name = "Capture";
|
|
drv->capture.channels_min = 1;
|
|
drv->capture.channels_max = 2;
|
|
drv->capture.formats = SNDRV_PCM_FMTBIT_IEC958_SUBFRAME_LE;
|
|
|
|
for (i = 0; i < SPDIFIN_MODE_NUM; i++) {
|
|
unsigned int rb =
|
|
snd_pcm_rate_to_rate_bit(priv->conf->mode_rates[i]);
|
|
|
|
if (rb == SNDRV_PCM_RATE_KNOT)
|
|
return ERR_PTR(-EINVAL);
|
|
|
|
drv->capture.rates |= rb;
|
|
}
|
|
|
|
return drv;
|
|
}
|
|
|
|
static int axg_spdifin_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct axg_spdifin *priv;
|
|
struct snd_soc_dai_driver *dai_drv;
|
|
void __iomem *regs;
|
|
|
|
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
|
|
if (!priv)
|
|
return -ENOMEM;
|
|
platform_set_drvdata(pdev, priv);
|
|
|
|
priv->conf = of_device_get_match_data(dev);
|
|
if (!priv->conf) {
|
|
dev_err(dev, "failed to match device\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
regs = devm_platform_ioremap_resource(pdev, 0);
|
|
if (IS_ERR(regs))
|
|
return PTR_ERR(regs);
|
|
|
|
priv->map = devm_regmap_init_mmio(dev, regs, &axg_spdifin_regmap_cfg);
|
|
if (IS_ERR(priv->map)) {
|
|
dev_err(dev, "failed to init regmap: %ld\n",
|
|
PTR_ERR(priv->map));
|
|
return PTR_ERR(priv->map);
|
|
}
|
|
|
|
priv->pclk = devm_clk_get(dev, "pclk");
|
|
if (IS_ERR(priv->pclk))
|
|
return dev_err_probe(dev, PTR_ERR(priv->pclk), "failed to get pclk\n");
|
|
|
|
priv->refclk = devm_clk_get(dev, "refclk");
|
|
if (IS_ERR(priv->refclk))
|
|
return dev_err_probe(dev, PTR_ERR(priv->refclk), "failed to get mclk\n");
|
|
|
|
dai_drv = axg_spdifin_get_dai_drv(dev, priv);
|
|
if (IS_ERR(dai_drv)) {
|
|
dev_err(dev, "failed to get dai driver: %ld\n",
|
|
PTR_ERR(dai_drv));
|
|
return PTR_ERR(dai_drv);
|
|
}
|
|
|
|
return devm_snd_soc_register_component(dev, &axg_spdifin_component_drv,
|
|
dai_drv, 1);
|
|
}
|
|
|
|
static struct platform_driver axg_spdifin_pdrv = {
|
|
.probe = axg_spdifin_probe,
|
|
.driver = {
|
|
.name = "axg-spdifin",
|
|
.of_match_table = axg_spdifin_of_match,
|
|
},
|
|
};
|
|
module_platform_driver(axg_spdifin_pdrv);
|
|
|
|
MODULE_DESCRIPTION("Amlogic AXG SPDIF Input driver");
|
|
MODULE_AUTHOR("Jerome Brunet <jbrunet@baylibre.com>");
|
|
MODULE_LICENSE("GPL v2");
|