Sascha Hauer c242a47238 net: phy: genphy: Allow overwriting features ... of_set_phy_supported allows overwiting hardware capabilities of a phy with values from the devicetree. This does not work with the genphy driver though because the genphys config_init function will overwrite all values adjusted by of_set_phy_supported. Fix this by initialising the genphy features in the phy_driver struct and in config_init just limit the features to the ones the hardware can actually support. The resulting features are a subset of the devicetree specified features and the hardware features. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>		2014-05-22 15:43:02 -04:00
..
amd.c
at803x.c	net/phy: Remove return value for void function	2014-04-23 15:28:05 -04:00
bcm7xxx.c	net: phy: bcm7xxx: properly clear AFE_RX_LP_COUNTER	2014-03-26 16:19:24 -04:00
bcm63xx.c	phy: bcm63xx: report Broadcom BCM63xx PHYs as internal	2013-05-27 22:42:50 -07:00
bcm87xx.c
broadcom.c	net: phy: broadcom: extract register definitions	2014-02-14 00:27:58 -05:00
cicada.c	net: phy: cicada: fix checkpath errors	2013-12-18 00:49:01 -05:00
davicom.c	net: phy: davicom: fix checkpath errors	2013-12-18 00:49:01 -05:00
dp83640_reg.h
dp83640.c	net: ptp: move PTP classifier in its own file	2014-04-01 16:43:18 -04:00
et1011c.c
fixed.c	net: phy: extend fixed driver with fixed_phy_register()	2014-05-16 17:18:49 -04:00
icplus.c	net: phy: icplus: fix checkpath error	2013-12-18 00:49:02 -05:00
Kconfig	net: phy: add Broadcom BCM7xxx internal PHY driver	2014-02-14 00:27:58 -05:00
lxt.c	net: phy: lxt: fix checkpath errors	2013-12-18 00:49:02 -05:00
Makefile	net: phy: add Broadcom BCM7xxx internal PHY driver	2014-02-14 00:27:58 -05:00
marvell.c	net: phy: marvell: provide genphy suspend/resume	2013-12-17 14:42:44 -05:00
mdio_bus.c	mdio_bus: fix devm_mdiobus_alloc_size export	2014-05-09 16:39:11 -04:00
mdio-bitbang.c	Revert "drivers/net/phy/mdio-bitbang.c: Call mdiobus_unregister before mdiobus_free"	2012-11-14 22:32:15 -05:00
mdio-gpio.c	net: mdio-gpio: warn about missing bus alias id	2014-05-09 15:51:19 -04:00
mdio-moxart.c	drivers/net: delete non-required instances of include <linux/init.h>	2014-01-16 11:53:26 -08:00
mdio-mux-gpio.c	drivers/net: delete non-required instances of include <linux/init.h>	2014-01-16 11:53:26 -08:00
mdio-mux-mmioreg.c	drivers/net: delete non-required instances of include <linux/init.h>	2014-01-16 11:53:26 -08:00
mdio-mux.c
mdio-octeon.c	drivers/net: delete non-required instances of include <linux/init.h>	2014-01-16 11:53:26 -08:00
mdio-sun4i.c	net: sun4i: remove empty MDIO bus reset function	2014-03-28 01:38:02 -04:00
micrel.c	ARM: i.MX6: Add OF configuration support for ksz9031	2014-05-07 16:51:09 -04:00
national.c
phy_device.c	net: phy: genphy: Allow overwriting features	2014-05-22 15:43:02 -04:00
phy.c	net phy: Check for aneg completion before setting state to PHY_RUNNING	2014-05-02 15:50:57 -04:00
qsemi.c
realtek.c	PHY: Add RTL8201CP phy_driver to realtek	2013-11-11 14:05:03 -05:00
smsc.c	net/phy: Remove return value for void function	2014-04-23 15:28:05 -04:00
spi_ks8995.c	net: Micrel KSZ8864RMN 4-port managed switch support	2014-04-03 16:15:29 -04:00
ste10Xp.c
vitesse.c	net/phy: Remove return value for void function	2014-04-23 15:28:05 -04:00