linux/drivers/net/usb/huawei_cdc_ncm.c
Bjørn Mork 3acc74619b net: huawei_cdc_ncm: increase command buffer size
Messages from the modem exceeding 256 bytes cause communication
failure.

The WDM protocol is strictly "read on demand", meaning that we only
poll for unread data after receiving a notification from the modem.
Since we have no way to know how much data the modem has to send,
we must make sure that the buffer we provide is "big enough".
Message truncation does not work. Truncated messages are left unread
until the modem has another message to send.  Which often won't
happen until the userspace application has given up waiting for the
final part of the last message, and therefore sends another command.

With a proper CDC WDM function there is a descriptor telling us
which buffer size the modem uses. But with this vendor specific
implementation there is no known way to calculate the exact "big
enough" number.  It is an unknown property of the modem firmware.
Experience has shown that 256 is too small.  The discussion of
this failure ended up concluding that 512 might be too small as
well. So 1024 seems like a reasonable value for now.

Fixes: 41c47d8cfd ("net: huawei_cdc_ncm: Introduce the huawei_cdc_ncm driver")
Cc: Enrico Mioso <mrkiko.rs@gmail.com>
Reported-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Acked-By: Enrico Mioso <mrkiko.rs@gmail.com>
Tested-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-21 19:33:17 -07:00

219 lines
5.9 KiB
C

/* huawei_cdc_ncm.c - handles Huawei devices using the CDC NCM protocol as
* transport layer.
* Copyright (C) 2013 Enrico Mioso <mrkiko.rs@gmail.com>
*
*
* ABSTRACT:
* This driver handles devices resembling the CDC NCM standard, but
* encapsulating another protocol inside it. An example are some Huawei 3G
* devices, exposing an embedded AT channel where you can set up the NCM
* connection.
* This code has been heavily inspired by the cdc_mbim.c driver, which is
* Copyright (c) 2012 Smith Micro Software, Inc.
* Copyright (c) 2012 Bjørn Mork <bjorn@mork.no>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*/
#include <linux/module.h>
#include <linux/netdevice.h>
#include <linux/ethtool.h>
#include <linux/if_vlan.h>
#include <linux/ip.h>
#include <linux/mii.h>
#include <linux/usb.h>
#include <linux/usb/cdc.h>
#include <linux/usb/usbnet.h>
#include <linux/usb/cdc-wdm.h>
#include <linux/usb/cdc_ncm.h>
/* Driver data */
struct huawei_cdc_ncm_state {
struct cdc_ncm_ctx *ctx;
atomic_t pmcount;
struct usb_driver *subdriver;
struct usb_interface *control;
struct usb_interface *data;
};
static int huawei_cdc_ncm_manage_power(struct usbnet *usbnet_dev, int on)
{
struct huawei_cdc_ncm_state *drvstate = (void *)&usbnet_dev->data;
int rv;
if ((on && atomic_add_return(1, &drvstate->pmcount) == 1) ||
(!on && atomic_dec_and_test(&drvstate->pmcount))) {
rv = usb_autopm_get_interface(usbnet_dev->intf);
usbnet_dev->intf->needs_remote_wakeup = on;
if (!rv)
usb_autopm_put_interface(usbnet_dev->intf);
}
return 0;
}
static int huawei_cdc_ncm_wdm_manage_power(struct usb_interface *intf,
int status)
{
struct usbnet *usbnet_dev = usb_get_intfdata(intf);
/* can be called while disconnecting */
if (!usbnet_dev)
return 0;
return huawei_cdc_ncm_manage_power(usbnet_dev, status);
}
static int huawei_cdc_ncm_bind(struct usbnet *usbnet_dev,
struct usb_interface *intf)
{
struct cdc_ncm_ctx *ctx;
struct usb_driver *subdriver = ERR_PTR(-ENODEV);
int ret = -ENODEV;
struct huawei_cdc_ncm_state *drvstate = (void *)&usbnet_dev->data;
/* altsetting should always be 1 for NCM devices - so we hard-coded
* it here
*/
ret = cdc_ncm_bind_common(usbnet_dev, intf, 1);
if (ret)
goto err;
ctx = drvstate->ctx;
if (usbnet_dev->status)
/* The wMaxCommand buffer must be big enough to hold
* any message from the modem. Experience has shown
* that some replies are more than 256 bytes long
*/
subdriver = usb_cdc_wdm_register(ctx->control,
&usbnet_dev->status->desc,
1024, /* wMaxCommand */
huawei_cdc_ncm_wdm_manage_power);
if (IS_ERR(subdriver)) {
ret = PTR_ERR(subdriver);
cdc_ncm_unbind(usbnet_dev, intf);
goto err;
}
/* Prevent usbnet from using the status descriptor */
usbnet_dev->status = NULL;
drvstate->subdriver = subdriver;
err:
return ret;
}
static void huawei_cdc_ncm_unbind(struct usbnet *usbnet_dev,
struct usb_interface *intf)
{
struct huawei_cdc_ncm_state *drvstate = (void *)&usbnet_dev->data;
struct cdc_ncm_ctx *ctx = drvstate->ctx;
if (drvstate->subdriver && drvstate->subdriver->disconnect)
drvstate->subdriver->disconnect(ctx->control);
drvstate->subdriver = NULL;
cdc_ncm_unbind(usbnet_dev, intf);
}
static int huawei_cdc_ncm_suspend(struct usb_interface *intf,
pm_message_t message)
{
int ret = 0;
struct usbnet *usbnet_dev = usb_get_intfdata(intf);
struct huawei_cdc_ncm_state *drvstate = (void *)&usbnet_dev->data;
struct cdc_ncm_ctx *ctx = drvstate->ctx;
if (ctx == NULL) {
ret = -ENODEV;
goto error;
}
ret = usbnet_suspend(intf, message);
if (ret < 0)
goto error;
if (intf == ctx->control &&
drvstate->subdriver &&
drvstate->subdriver->suspend)
ret = drvstate->subdriver->suspend(intf, message);
if (ret < 0)
usbnet_resume(intf);
error:
return ret;
}
static int huawei_cdc_ncm_resume(struct usb_interface *intf)
{
int ret = 0;
struct usbnet *usbnet_dev = usb_get_intfdata(intf);
struct huawei_cdc_ncm_state *drvstate = (void *)&usbnet_dev->data;
bool callsub;
struct cdc_ncm_ctx *ctx = drvstate->ctx;
/* should we call subdriver's resume function? */
callsub =
(intf == ctx->control &&
drvstate->subdriver &&
drvstate->subdriver->resume);
if (callsub)
ret = drvstate->subdriver->resume(intf);
if (ret < 0)
goto err;
ret = usbnet_resume(intf);
if (ret < 0 && callsub)
drvstate->subdriver->suspend(intf, PMSG_SUSPEND);
err:
return ret;
}
static const struct driver_info huawei_cdc_ncm_info = {
.description = "Huawei CDC NCM device",
.flags = FLAG_NO_SETINT | FLAG_MULTI_PACKET | FLAG_WWAN,
.bind = huawei_cdc_ncm_bind,
.unbind = huawei_cdc_ncm_unbind,
.manage_power = huawei_cdc_ncm_manage_power,
.rx_fixup = cdc_ncm_rx_fixup,
.tx_fixup = cdc_ncm_tx_fixup,
};
static const struct usb_device_id huawei_cdc_ncm_devs[] = {
/* Huawei NCM devices disguised as vendor specific */
{ USB_VENDOR_AND_INTERFACE_INFO(0x12d1, 0xff, 0x02, 0x16),
.driver_info = (unsigned long)&huawei_cdc_ncm_info,
},
{ USB_VENDOR_AND_INTERFACE_INFO(0x12d1, 0xff, 0x02, 0x46),
.driver_info = (unsigned long)&huawei_cdc_ncm_info,
},
{ USB_VENDOR_AND_INTERFACE_INFO(0x12d1, 0xff, 0x02, 0x76),
.driver_info = (unsigned long)&huawei_cdc_ncm_info,
},
/* Terminating entry */
{
},
};
MODULE_DEVICE_TABLE(usb, huawei_cdc_ncm_devs);
static struct usb_driver huawei_cdc_ncm_driver = {
.name = "huawei_cdc_ncm",
.id_table = huawei_cdc_ncm_devs,
.probe = usbnet_probe,
.disconnect = usbnet_disconnect,
.suspend = huawei_cdc_ncm_suspend,
.resume = huawei_cdc_ncm_resume,
.reset_resume = huawei_cdc_ncm_resume,
.supports_autosuspend = 1,
.disable_hub_initiated_lpm = 1,
};
module_usb_driver(huawei_cdc_ncm_driver);
MODULE_AUTHOR("Enrico Mioso <mrkiko.rs@gmail.com>");
MODULE_DESCRIPTION("USB CDC NCM host driver with encapsulated protocol support");
MODULE_LICENSE("GPL");