mirror of
https://github.com/torvalds/linux.git
synced 2024-11-24 21:21:41 +00:00
fb74e4fa52
In this driver LEDs are registered using devm_led_classdev_register() so they are automatically unregistered after module's remove() is done. led_classdev_unregister() calls module's led_set_brightness() to turn off the LEDs and that callback uses resources which were destroyed already in module's remove() so use devm API instead of remove(). Signed-off-by: George Stark <gnstark@salutedevices.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Tested-by: Nikita Travkin <nikita@trvn.ru> Link: https://lore.kernel.org/r/20240411161032.609544-3-gnstark@salutedevices.com Signed-off-by: Lee Jones <lee@kernel.org>
444 lines
9.7 KiB
C
444 lines
9.7 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
// Driver for Awinic AW2013 3-channel LED driver
|
|
|
|
#include <linux/i2c.h>
|
|
#include <linux/leds.h>
|
|
#include <linux/module.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/of.h>
|
|
#include <linux/regmap.h>
|
|
|
|
#define AW2013_MAX_LEDS 3
|
|
|
|
/* Reset and ID register */
|
|
#define AW2013_RSTR 0x00
|
|
#define AW2013_RSTR_RESET 0x55
|
|
#define AW2013_RSTR_CHIP_ID 0x33
|
|
|
|
/* Global control register */
|
|
#define AW2013_GCR 0x01
|
|
#define AW2013_GCR_ENABLE BIT(0)
|
|
|
|
/* LED channel enable register */
|
|
#define AW2013_LCTR 0x30
|
|
#define AW2013_LCTR_LE(x) BIT((x))
|
|
|
|
/* LED channel control registers */
|
|
#define AW2013_LCFG(x) (0x31 + (x))
|
|
#define AW2013_LCFG_IMAX_MASK (BIT(0) | BIT(1)) // Should be 0-3
|
|
#define AW2013_LCFG_MD BIT(4)
|
|
#define AW2013_LCFG_FI BIT(5)
|
|
#define AW2013_LCFG_FO BIT(6)
|
|
|
|
/* LED channel PWM registers */
|
|
#define AW2013_REG_PWM(x) (0x34 + (x))
|
|
|
|
/* LED channel timing registers */
|
|
#define AW2013_LEDT0(x) (0x37 + (x) * 3)
|
|
#define AW2013_LEDT0_T1(x) ((x) << 4) // Should be 0-7
|
|
#define AW2013_LEDT0_T2(x) (x) // Should be 0-5
|
|
|
|
#define AW2013_LEDT1(x) (0x38 + (x) * 3)
|
|
#define AW2013_LEDT1_T3(x) ((x) << 4) // Should be 0-7
|
|
#define AW2013_LEDT1_T4(x) (x) // Should be 0-7
|
|
|
|
#define AW2013_LEDT2(x) (0x39 + (x) * 3)
|
|
#define AW2013_LEDT2_T0(x) ((x) << 4) // Should be 0-8
|
|
#define AW2013_LEDT2_REPEAT(x) (x) // Should be 0-15
|
|
|
|
#define AW2013_REG_MAX 0x77
|
|
|
|
#define AW2013_TIME_STEP 130 /* ms */
|
|
|
|
struct aw2013;
|
|
|
|
struct aw2013_led {
|
|
struct aw2013 *chip;
|
|
struct led_classdev cdev;
|
|
u32 num;
|
|
unsigned int imax;
|
|
};
|
|
|
|
struct aw2013 {
|
|
struct mutex mutex; /* held when writing to registers */
|
|
struct regulator_bulk_data regulators[2];
|
|
struct i2c_client *client;
|
|
struct aw2013_led leds[AW2013_MAX_LEDS];
|
|
struct regmap *regmap;
|
|
int num_leds;
|
|
bool enabled;
|
|
};
|
|
|
|
static int aw2013_chip_init(struct aw2013 *chip)
|
|
{
|
|
int i, ret;
|
|
|
|
ret = regmap_write(chip->regmap, AW2013_GCR, AW2013_GCR_ENABLE);
|
|
if (ret) {
|
|
dev_err(&chip->client->dev, "Failed to enable the chip: %d\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
|
|
for (i = 0; i < chip->num_leds; i++) {
|
|
ret = regmap_update_bits(chip->regmap,
|
|
AW2013_LCFG(chip->leds[i].num),
|
|
AW2013_LCFG_IMAX_MASK,
|
|
chip->leds[i].imax);
|
|
if (ret) {
|
|
dev_err(&chip->client->dev,
|
|
"Failed to set maximum current for led %d: %d\n",
|
|
chip->leds[i].num, ret);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void aw2013_chip_disable(struct aw2013 *chip)
|
|
{
|
|
int ret;
|
|
|
|
if (!chip->enabled)
|
|
return;
|
|
|
|
regmap_write(chip->regmap, AW2013_GCR, 0);
|
|
|
|
ret = regulator_bulk_disable(ARRAY_SIZE(chip->regulators),
|
|
chip->regulators);
|
|
if (ret) {
|
|
dev_err(&chip->client->dev,
|
|
"Failed to disable regulators: %d\n", ret);
|
|
return;
|
|
}
|
|
|
|
chip->enabled = false;
|
|
}
|
|
|
|
static int aw2013_chip_enable(struct aw2013 *chip)
|
|
{
|
|
int ret;
|
|
|
|
if (chip->enabled)
|
|
return 0;
|
|
|
|
ret = regulator_bulk_enable(ARRAY_SIZE(chip->regulators),
|
|
chip->regulators);
|
|
if (ret) {
|
|
dev_err(&chip->client->dev,
|
|
"Failed to enable regulators: %d\n", ret);
|
|
return ret;
|
|
}
|
|
chip->enabled = true;
|
|
|
|
ret = aw2013_chip_init(chip);
|
|
if (ret)
|
|
aw2013_chip_disable(chip);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static bool aw2013_chip_in_use(struct aw2013 *chip)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < chip->num_leds; i++)
|
|
if (chip->leds[i].cdev.brightness)
|
|
return true;
|
|
|
|
return false;
|
|
}
|
|
|
|
static int aw2013_brightness_set(struct led_classdev *cdev,
|
|
enum led_brightness brightness)
|
|
{
|
|
struct aw2013_led *led = container_of(cdev, struct aw2013_led, cdev);
|
|
int ret, num;
|
|
|
|
mutex_lock(&led->chip->mutex);
|
|
|
|
if (aw2013_chip_in_use(led->chip)) {
|
|
ret = aw2013_chip_enable(led->chip);
|
|
if (ret)
|
|
goto error;
|
|
}
|
|
|
|
num = led->num;
|
|
|
|
ret = regmap_write(led->chip->regmap, AW2013_REG_PWM(num), brightness);
|
|
if (ret)
|
|
goto error;
|
|
|
|
if (brightness) {
|
|
ret = regmap_update_bits(led->chip->regmap, AW2013_LCTR,
|
|
AW2013_LCTR_LE(num), 0xFF);
|
|
} else {
|
|
ret = regmap_update_bits(led->chip->regmap, AW2013_LCTR,
|
|
AW2013_LCTR_LE(num), 0);
|
|
if (ret)
|
|
goto error;
|
|
ret = regmap_update_bits(led->chip->regmap, AW2013_LCFG(num),
|
|
AW2013_LCFG_MD, 0);
|
|
}
|
|
if (ret)
|
|
goto error;
|
|
|
|
if (!aw2013_chip_in_use(led->chip))
|
|
aw2013_chip_disable(led->chip);
|
|
|
|
error:
|
|
mutex_unlock(&led->chip->mutex);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int aw2013_blink_set(struct led_classdev *cdev,
|
|
unsigned long *delay_on, unsigned long *delay_off)
|
|
{
|
|
struct aw2013_led *led = container_of(cdev, struct aw2013_led, cdev);
|
|
int ret, num = led->num;
|
|
unsigned long off = 0, on = 0;
|
|
|
|
/* If no blink specified, default to 1 Hz. */
|
|
if (!*delay_off && !*delay_on) {
|
|
*delay_off = 500;
|
|
*delay_on = 500;
|
|
}
|
|
|
|
if (!led->cdev.brightness) {
|
|
led->cdev.brightness = LED_FULL;
|
|
ret = aw2013_brightness_set(&led->cdev, led->cdev.brightness);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
/* Never on - just set to off */
|
|
if (!*delay_on) {
|
|
led->cdev.brightness = LED_OFF;
|
|
return aw2013_brightness_set(&led->cdev, LED_OFF);
|
|
}
|
|
|
|
mutex_lock(&led->chip->mutex);
|
|
|
|
/* Never off - brightness is already set, disable blinking */
|
|
if (!*delay_off) {
|
|
ret = regmap_update_bits(led->chip->regmap, AW2013_LCFG(num),
|
|
AW2013_LCFG_MD, 0);
|
|
goto out;
|
|
}
|
|
|
|
/* Convert into values the HW will understand. */
|
|
off = min(5, ilog2((*delay_off - 1) / AW2013_TIME_STEP) + 1);
|
|
on = min(7, ilog2((*delay_on - 1) / AW2013_TIME_STEP) + 1);
|
|
|
|
*delay_off = BIT(off) * AW2013_TIME_STEP;
|
|
*delay_on = BIT(on) * AW2013_TIME_STEP;
|
|
|
|
/* Set timings */
|
|
ret = regmap_write(led->chip->regmap,
|
|
AW2013_LEDT0(num), AW2013_LEDT0_T2(on));
|
|
if (ret)
|
|
goto out;
|
|
ret = regmap_write(led->chip->regmap,
|
|
AW2013_LEDT1(num), AW2013_LEDT1_T4(off));
|
|
if (ret)
|
|
goto out;
|
|
|
|
/* Finally, enable the LED */
|
|
ret = regmap_update_bits(led->chip->regmap, AW2013_LCFG(num),
|
|
AW2013_LCFG_MD, 0xFF);
|
|
if (ret)
|
|
goto out;
|
|
|
|
ret = regmap_update_bits(led->chip->regmap, AW2013_LCTR,
|
|
AW2013_LCTR_LE(num), 0xFF);
|
|
|
|
out:
|
|
mutex_unlock(&led->chip->mutex);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int aw2013_probe_dt(struct aw2013 *chip)
|
|
{
|
|
struct device_node *np = dev_of_node(&chip->client->dev), *child;
|
|
int count, ret = 0, i = 0;
|
|
struct aw2013_led *led;
|
|
|
|
count = of_get_available_child_count(np);
|
|
if (!count || count > AW2013_MAX_LEDS)
|
|
return -EINVAL;
|
|
|
|
regmap_write(chip->regmap, AW2013_RSTR, AW2013_RSTR_RESET);
|
|
|
|
for_each_available_child_of_node(np, child) {
|
|
struct led_init_data init_data = {};
|
|
u32 source;
|
|
u32 imax;
|
|
|
|
ret = of_property_read_u32(child, "reg", &source);
|
|
if (ret != 0 || source >= AW2013_MAX_LEDS) {
|
|
dev_err(&chip->client->dev,
|
|
"Couldn't read LED address: %d\n", ret);
|
|
count--;
|
|
continue;
|
|
}
|
|
|
|
led = &chip->leds[i];
|
|
led->num = source;
|
|
led->chip = chip;
|
|
init_data.fwnode = of_fwnode_handle(child);
|
|
|
|
if (!of_property_read_u32(child, "led-max-microamp", &imax)) {
|
|
led->imax = min_t(u32, imax / 5000, 3);
|
|
} else {
|
|
led->imax = 1; // 5mA
|
|
dev_info(&chip->client->dev,
|
|
"DT property led-max-microamp is missing\n");
|
|
}
|
|
|
|
led->cdev.brightness_set_blocking = aw2013_brightness_set;
|
|
led->cdev.blink_set = aw2013_blink_set;
|
|
|
|
ret = devm_led_classdev_register_ext(&chip->client->dev,
|
|
&led->cdev, &init_data);
|
|
if (ret < 0) {
|
|
of_node_put(child);
|
|
return ret;
|
|
}
|
|
|
|
i++;
|
|
}
|
|
|
|
if (!count)
|
|
return -EINVAL;
|
|
|
|
chip->num_leds = i;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void aw2013_chip_disable_action(void *data)
|
|
{
|
|
aw2013_chip_disable(data);
|
|
}
|
|
|
|
static const struct regmap_config aw2013_regmap_config = {
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
.max_register = AW2013_REG_MAX,
|
|
};
|
|
|
|
static int aw2013_probe(struct i2c_client *client)
|
|
{
|
|
struct aw2013 *chip;
|
|
int ret;
|
|
unsigned int chipid;
|
|
|
|
chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL);
|
|
if (!chip)
|
|
return -ENOMEM;
|
|
|
|
ret = devm_mutex_init(&client->dev, &chip->mutex);
|
|
if (ret)
|
|
return ret;
|
|
|
|
mutex_lock(&chip->mutex);
|
|
|
|
chip->client = client;
|
|
i2c_set_clientdata(client, chip);
|
|
|
|
chip->regmap = devm_regmap_init_i2c(client, &aw2013_regmap_config);
|
|
if (IS_ERR(chip->regmap)) {
|
|
ret = PTR_ERR(chip->regmap);
|
|
dev_err(&client->dev, "Failed to allocate register map: %d\n",
|
|
ret);
|
|
goto error;
|
|
}
|
|
|
|
chip->regulators[0].supply = "vcc";
|
|
chip->regulators[1].supply = "vio";
|
|
ret = devm_regulator_bulk_get(&client->dev,
|
|
ARRAY_SIZE(chip->regulators),
|
|
chip->regulators);
|
|
if (ret < 0) {
|
|
if (ret != -EPROBE_DEFER)
|
|
dev_err(&client->dev,
|
|
"Failed to request regulators: %d\n", ret);
|
|
goto error;
|
|
}
|
|
|
|
ret = regulator_bulk_enable(ARRAY_SIZE(chip->regulators),
|
|
chip->regulators);
|
|
if (ret) {
|
|
dev_err(&client->dev,
|
|
"Failed to enable regulators: %d\n", ret);
|
|
goto error;
|
|
}
|
|
|
|
ret = regmap_read(chip->regmap, AW2013_RSTR, &chipid);
|
|
if (ret) {
|
|
dev_err(&client->dev, "Failed to read chip ID: %d\n",
|
|
ret);
|
|
goto error_reg;
|
|
}
|
|
|
|
if (chipid != AW2013_RSTR_CHIP_ID) {
|
|
dev_err(&client->dev, "Chip reported wrong ID: %x\n",
|
|
chipid);
|
|
ret = -ENODEV;
|
|
goto error_reg;
|
|
}
|
|
|
|
ret = devm_add_action(&client->dev, aw2013_chip_disable_action, chip);
|
|
if (ret)
|
|
goto error_reg;
|
|
|
|
ret = aw2013_probe_dt(chip);
|
|
if (ret < 0)
|
|
goto error_reg;
|
|
|
|
ret = regulator_bulk_disable(ARRAY_SIZE(chip->regulators),
|
|
chip->regulators);
|
|
if (ret) {
|
|
dev_err(&client->dev,
|
|
"Failed to disable regulators: %d\n", ret);
|
|
goto error;
|
|
}
|
|
|
|
mutex_unlock(&chip->mutex);
|
|
|
|
return 0;
|
|
|
|
error_reg:
|
|
regulator_bulk_disable(ARRAY_SIZE(chip->regulators),
|
|
chip->regulators);
|
|
|
|
error:
|
|
mutex_unlock(&chip->mutex);
|
|
return ret;
|
|
}
|
|
|
|
static const struct of_device_id aw2013_match_table[] = {
|
|
{ .compatible = "awinic,aw2013", },
|
|
{ /* sentinel */ },
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(of, aw2013_match_table);
|
|
|
|
static struct i2c_driver aw2013_driver = {
|
|
.driver = {
|
|
.name = "leds-aw2013",
|
|
.of_match_table = aw2013_match_table,
|
|
},
|
|
.probe = aw2013_probe,
|
|
};
|
|
|
|
module_i2c_driver(aw2013_driver);
|
|
|
|
MODULE_AUTHOR("Nikita Travkin <nikitos.tr@gmail.com>");
|
|
MODULE_DESCRIPTION("AW2013 LED driver");
|
|
MODULE_LICENSE("GPL v2");
|