mirror of
https://github.com/torvalds/linux.git
synced 2024-12-26 12:52:30 +00:00
bcc1dd4cd7
Add device-tree entry to enable external 32-kHz crystal oscillator input. Compile-only tested. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
136 lines
4.3 KiB
Plaintext
136 lines
4.3 KiB
Plaintext
TPS65910 Power Management Integrated Circuit
|
|
|
|
Required properties:
|
|
- compatible: "ti,tps65910" or "ti,tps65911"
|
|
- reg: I2C slave address
|
|
- interrupts: the interrupt outputs of the controller
|
|
- #gpio-cells: number of cells to describe a GPIO, this should be 2.
|
|
The first cell is the GPIO number.
|
|
The second cell is used to specify additional options <unused>.
|
|
- gpio-controller: mark the device as a GPIO controller
|
|
- #interrupt-cells: the number of cells to describe an IRQ, this should be 2.
|
|
The first cell is the IRQ number.
|
|
The second cell is the flags, encoded as the trigger masks from
|
|
Documentation/devicetree/bindings/interrupts.txt
|
|
- regulators: This is the list of child nodes that specify the regulator
|
|
initialization data for defined regulators. Not all regulators for the given
|
|
device need to be present. The definition for each of these nodes is defined
|
|
using the standard binding for regulators found at
|
|
Documentation/devicetree/bindings/regulator/regulator.txt.
|
|
|
|
The valid names for regulators are:
|
|
tps65910: vrtc, vio, vdd1, vdd2, vdd3, vdig1, vdig2, vpll, vdac, vaux1,
|
|
vaux2, vaux33, vmmc
|
|
tps65911: vrtc, vio, vdd1, vdd3, vddctrl, ldo1, ldo2, ldo3, ldo4, ldo5,
|
|
ldo6, ldo7, ldo8
|
|
|
|
Optional properties:
|
|
- ti,vmbch-threshold: (tps65911) main battery charged threshold
|
|
comparator. (see VMBCH_VSEL in TPS65910 datasheet)
|
|
- ti,vmbch2-threshold: (tps65911) main battery discharged threshold
|
|
comparator. (see VMBCH_VSEL in TPS65910 datasheet)
|
|
- ti,en-ck32k-xtal: enable external 32-kHz crystal oscillator (see CK32K_CTRL
|
|
in TPS6591X datasheet)
|
|
- ti,en-gpio-sleep: enable sleep control for gpios
|
|
There should be 9 entries here, one for each gpio.
|
|
|
|
Regulator Optional properties:
|
|
- ti,regulator-ext-sleep-control: enable external sleep
|
|
control through external inputs [0 (not enabled), 1 (EN1), 2 (EN2) or 4(EN3)]
|
|
If this property is not defined, it defaults to 0 (not enabled).
|
|
|
|
Example:
|
|
|
|
pmu: tps65910@d2 {
|
|
compatible = "ti,tps65910";
|
|
reg = <0xd2>;
|
|
interrupt-parent = <&intc>;
|
|
interrupts = < 0 118 0x04 >;
|
|
|
|
#gpio-cells = <2>;
|
|
gpio-controller;
|
|
|
|
#interrupt-cells = <2>;
|
|
interrupt-controller;
|
|
|
|
ti,vmbch-threshold = 0;
|
|
ti,vmbch2-threshold = 0;
|
|
ti,en-ck32k-xtal;
|
|
ti,en-gpio-sleep = <0 0 1 0 0 0 0 0 0>;
|
|
|
|
regulators {
|
|
vdd1_reg: vdd1 {
|
|
regulator-min-microvolt = < 600000>;
|
|
regulator-max-microvolt = <1500000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
ti,regulator-ext-sleep-control = <0>;
|
|
};
|
|
vdd2_reg: vdd2 {
|
|
regulator-min-microvolt = < 600000>;
|
|
regulator-max-microvolt = <1500000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
ti,regulator-ext-sleep-control = <4>;
|
|
};
|
|
vddctrl_reg: vddctrl {
|
|
regulator-min-microvolt = < 600000>;
|
|
regulator-max-microvolt = <1400000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
ti,regulator-ext-sleep-control = <0>;
|
|
};
|
|
vio_reg: vio {
|
|
regulator-min-microvolt = <1500000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
ti,regulator-ext-sleep-control = <1>;
|
|
};
|
|
ldo1_reg: ldo1 {
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
ti,regulator-ext-sleep-control = <0>;
|
|
};
|
|
ldo2_reg: ldo2 {
|
|
regulator-min-microvolt = <1050000>;
|
|
regulator-max-microvolt = <1050000>;
|
|
ti,regulator-ext-sleep-control = <0>;
|
|
};
|
|
ldo3_reg: ldo3 {
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
ti,regulator-ext-sleep-control = <0>;
|
|
};
|
|
ldo4_reg: ldo4 {
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
ti,regulator-ext-sleep-control = <0>;
|
|
};
|
|
ldo5_reg: ldo5 {
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
ti,regulator-ext-sleep-control = <0>;
|
|
};
|
|
ldo6_reg: ldo6 {
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
ti,regulator-ext-sleep-control = <0>;
|
|
};
|
|
ldo7_reg: ldo7 {
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
ti,regulator-ext-sleep-control = <1>;
|
|
};
|
|
ldo8_reg: ldo8 {
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
ti,regulator-ext-sleep-control = <1>;
|
|
};
|
|
};
|
|
};
|