mirror of
https://github.com/torvalds/linux.git
synced 2024-11-22 12:11:40 +00:00
41aea49053
Instead of using regmap_update_bits() and passing val = 0, use regmap_clear_bits(). Suggested-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Signed-off-by: Trevor Gamblin <tgamblin@baylibre.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Link: https://patch.msgid.link/20240617-review-v3-2-88d1338c4cca@baylibre.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
514 lines
12 KiB
C
514 lines
12 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* kxsd9.c simple support for the Kionix KXSD9 3D
|
|
* accelerometer.
|
|
*
|
|
* Copyright (c) 2008-2009 Jonathan Cameron <jic23@kernel.org>
|
|
*
|
|
* The i2c interface is very similar, so shouldn't be a problem once
|
|
* I have a suitable wire made up.
|
|
*
|
|
* TODO: Support the motion detector
|
|
*/
|
|
|
|
#include <linux/device.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/sysfs.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/module.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/iio/iio.h>
|
|
#include <linux/iio/sysfs.h>
|
|
#include <linux/iio/buffer.h>
|
|
#include <linux/iio/triggered_buffer.h>
|
|
#include <linux/iio/trigger_consumer.h>
|
|
|
|
#include "kxsd9.h"
|
|
|
|
#define KXSD9_REG_X 0x00
|
|
#define KXSD9_REG_Y 0x02
|
|
#define KXSD9_REG_Z 0x04
|
|
#define KXSD9_REG_AUX 0x06
|
|
#define KXSD9_REG_RESET 0x0a
|
|
#define KXSD9_REG_CTRL_C 0x0c
|
|
|
|
#define KXSD9_CTRL_C_FS_MASK 0x03
|
|
#define KXSD9_CTRL_C_FS_8G 0x00
|
|
#define KXSD9_CTRL_C_FS_6G 0x01
|
|
#define KXSD9_CTRL_C_FS_4G 0x02
|
|
#define KXSD9_CTRL_C_FS_2G 0x03
|
|
#define KXSD9_CTRL_C_MOT_LAT BIT(3)
|
|
#define KXSD9_CTRL_C_MOT_LEV BIT(4)
|
|
#define KXSD9_CTRL_C_LP_MASK 0xe0
|
|
#define KXSD9_CTRL_C_LP_NONE 0x00
|
|
#define KXSD9_CTRL_C_LP_2000HZC BIT(5)
|
|
#define KXSD9_CTRL_C_LP_2000HZB BIT(6)
|
|
#define KXSD9_CTRL_C_LP_2000HZA (BIT(5)|BIT(6))
|
|
#define KXSD9_CTRL_C_LP_1000HZ BIT(7)
|
|
#define KXSD9_CTRL_C_LP_500HZ (BIT(7)|BIT(5))
|
|
#define KXSD9_CTRL_C_LP_100HZ (BIT(7)|BIT(6))
|
|
#define KXSD9_CTRL_C_LP_50HZ (BIT(7)|BIT(6)|BIT(5))
|
|
|
|
#define KXSD9_REG_CTRL_B 0x0d
|
|
|
|
#define KXSD9_CTRL_B_CLK_HLD BIT(7)
|
|
#define KXSD9_CTRL_B_ENABLE BIT(6)
|
|
#define KXSD9_CTRL_B_ST BIT(5) /* Self-test */
|
|
|
|
#define KXSD9_REG_CTRL_A 0x0e
|
|
|
|
/**
|
|
* struct kxsd9_state - device related storage
|
|
* @dev: pointer to the parent device
|
|
* @map: regmap to the device
|
|
* @orientation: mounting matrix, flipped axis etc
|
|
* @regs: regulators for this device, VDD and IOVDD
|
|
* @scale: the current scaling setting
|
|
*/
|
|
struct kxsd9_state {
|
|
struct device *dev;
|
|
struct regmap *map;
|
|
struct iio_mount_matrix orientation;
|
|
struct regulator_bulk_data regs[2];
|
|
u8 scale;
|
|
};
|
|
|
|
#define KXSD9_SCALE_2G "0.011978"
|
|
#define KXSD9_SCALE_4G "0.023927"
|
|
#define KXSD9_SCALE_6G "0.035934"
|
|
#define KXSD9_SCALE_8G "0.047853"
|
|
|
|
/* reverse order */
|
|
static const int kxsd9_micro_scales[4] = { 47853, 35934, 23927, 11978 };
|
|
|
|
#define KXSD9_ZERO_G_OFFSET -2048
|
|
|
|
/*
|
|
* Regulator names
|
|
*/
|
|
static const char kxsd9_reg_vdd[] = "vdd";
|
|
static const char kxsd9_reg_iovdd[] = "iovdd";
|
|
|
|
static int kxsd9_write_scale(struct iio_dev *indio_dev, int micro)
|
|
{
|
|
int ret, i;
|
|
struct kxsd9_state *st = iio_priv(indio_dev);
|
|
bool foundit = false;
|
|
|
|
for (i = 0; i < 4; i++)
|
|
if (micro == kxsd9_micro_scales[i]) {
|
|
foundit = true;
|
|
break;
|
|
}
|
|
if (!foundit)
|
|
return -EINVAL;
|
|
|
|
ret = regmap_update_bits(st->map,
|
|
KXSD9_REG_CTRL_C,
|
|
KXSD9_CTRL_C_FS_MASK,
|
|
i);
|
|
if (ret < 0)
|
|
goto error_ret;
|
|
|
|
/* Cached scale when the sensor is powered down */
|
|
st->scale = i;
|
|
|
|
error_ret:
|
|
return ret;
|
|
}
|
|
|
|
static IIO_CONST_ATTR(accel_scale_available,
|
|
KXSD9_SCALE_2G " "
|
|
KXSD9_SCALE_4G " "
|
|
KXSD9_SCALE_6G " "
|
|
KXSD9_SCALE_8G);
|
|
|
|
static struct attribute *kxsd9_attributes[] = {
|
|
&iio_const_attr_accel_scale_available.dev_attr.attr,
|
|
NULL,
|
|
};
|
|
|
|
static int kxsd9_write_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan,
|
|
int val,
|
|
int val2,
|
|
long mask)
|
|
{
|
|
int ret = -EINVAL;
|
|
struct kxsd9_state *st = iio_priv(indio_dev);
|
|
|
|
pm_runtime_get_sync(st->dev);
|
|
|
|
if (mask == IIO_CHAN_INFO_SCALE) {
|
|
/* Check no integer component */
|
|
if (val)
|
|
return -EINVAL;
|
|
ret = kxsd9_write_scale(indio_dev, val2);
|
|
}
|
|
|
|
pm_runtime_mark_last_busy(st->dev);
|
|
pm_runtime_put_autosuspend(st->dev);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int kxsd9_read_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan,
|
|
int *val, int *val2, long mask)
|
|
{
|
|
int ret = -EINVAL;
|
|
struct kxsd9_state *st = iio_priv(indio_dev);
|
|
unsigned int regval;
|
|
__be16 raw_val;
|
|
u16 nval;
|
|
|
|
pm_runtime_get_sync(st->dev);
|
|
|
|
switch (mask) {
|
|
case IIO_CHAN_INFO_RAW:
|
|
ret = regmap_bulk_read(st->map, chan->address, &raw_val,
|
|
sizeof(raw_val));
|
|
if (ret)
|
|
goto error_ret;
|
|
nval = be16_to_cpu(raw_val);
|
|
/* Only 12 bits are valid */
|
|
nval >>= 4;
|
|
*val = nval;
|
|
ret = IIO_VAL_INT;
|
|
break;
|
|
case IIO_CHAN_INFO_OFFSET:
|
|
/* This has a bias of -2048 */
|
|
*val = KXSD9_ZERO_G_OFFSET;
|
|
ret = IIO_VAL_INT;
|
|
break;
|
|
case IIO_CHAN_INFO_SCALE:
|
|
ret = regmap_read(st->map,
|
|
KXSD9_REG_CTRL_C,
|
|
®val);
|
|
if (ret < 0)
|
|
goto error_ret;
|
|
*val = 0;
|
|
*val2 = kxsd9_micro_scales[regval & KXSD9_CTRL_C_FS_MASK];
|
|
ret = IIO_VAL_INT_PLUS_MICRO;
|
|
break;
|
|
}
|
|
|
|
error_ret:
|
|
pm_runtime_mark_last_busy(st->dev);
|
|
pm_runtime_put_autosuspend(st->dev);
|
|
|
|
return ret;
|
|
};
|
|
|
|
static irqreturn_t kxsd9_trigger_handler(int irq, void *p)
|
|
{
|
|
const struct iio_poll_func *pf = p;
|
|
struct iio_dev *indio_dev = pf->indio_dev;
|
|
struct kxsd9_state *st = iio_priv(indio_dev);
|
|
/*
|
|
* Ensure correct positioning and alignment of timestamp.
|
|
* No need to zero initialize as all elements written.
|
|
*/
|
|
struct {
|
|
__be16 chan[4];
|
|
s64 ts __aligned(8);
|
|
} hw_values;
|
|
int ret;
|
|
|
|
ret = regmap_bulk_read(st->map,
|
|
KXSD9_REG_X,
|
|
hw_values.chan,
|
|
sizeof(hw_values.chan));
|
|
if (ret) {
|
|
dev_err(st->dev, "error reading data: %d\n", ret);
|
|
goto out;
|
|
}
|
|
|
|
iio_push_to_buffers_with_timestamp(indio_dev,
|
|
&hw_values,
|
|
iio_get_time_ns(indio_dev));
|
|
out:
|
|
iio_trigger_notify_done(indio_dev->trig);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int kxsd9_buffer_preenable(struct iio_dev *indio_dev)
|
|
{
|
|
struct kxsd9_state *st = iio_priv(indio_dev);
|
|
|
|
pm_runtime_get_sync(st->dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int kxsd9_buffer_postdisable(struct iio_dev *indio_dev)
|
|
{
|
|
struct kxsd9_state *st = iio_priv(indio_dev);
|
|
|
|
pm_runtime_mark_last_busy(st->dev);
|
|
pm_runtime_put_autosuspend(st->dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct iio_buffer_setup_ops kxsd9_buffer_setup_ops = {
|
|
.preenable = kxsd9_buffer_preenable,
|
|
.postdisable = kxsd9_buffer_postdisable,
|
|
};
|
|
|
|
static const struct iio_mount_matrix *
|
|
kxsd9_get_mount_matrix(const struct iio_dev *indio_dev,
|
|
const struct iio_chan_spec *chan)
|
|
{
|
|
struct kxsd9_state *st = iio_priv(indio_dev);
|
|
|
|
return &st->orientation;
|
|
}
|
|
|
|
static const struct iio_chan_spec_ext_info kxsd9_ext_info[] = {
|
|
IIO_MOUNT_MATRIX(IIO_SHARED_BY_TYPE, kxsd9_get_mount_matrix),
|
|
{ },
|
|
};
|
|
|
|
#define KXSD9_ACCEL_CHAN(axis, index) \
|
|
{ \
|
|
.type = IIO_ACCEL, \
|
|
.modified = 1, \
|
|
.channel2 = IIO_MOD_##axis, \
|
|
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
|
|
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \
|
|
BIT(IIO_CHAN_INFO_OFFSET), \
|
|
.ext_info = kxsd9_ext_info, \
|
|
.address = KXSD9_REG_##axis, \
|
|
.scan_index = index, \
|
|
.scan_type = { \
|
|
.sign = 'u', \
|
|
.realbits = 12, \
|
|
.storagebits = 16, \
|
|
.shift = 4, \
|
|
.endianness = IIO_BE, \
|
|
}, \
|
|
}
|
|
|
|
static const struct iio_chan_spec kxsd9_channels[] = {
|
|
KXSD9_ACCEL_CHAN(X, 0),
|
|
KXSD9_ACCEL_CHAN(Y, 1),
|
|
KXSD9_ACCEL_CHAN(Z, 2),
|
|
{
|
|
.type = IIO_VOLTAGE,
|
|
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
|
|
.indexed = 1,
|
|
.address = KXSD9_REG_AUX,
|
|
.scan_index = 3,
|
|
.scan_type = {
|
|
.sign = 'u',
|
|
.realbits = 12,
|
|
.storagebits = 16,
|
|
.shift = 4,
|
|
.endianness = IIO_BE,
|
|
},
|
|
},
|
|
IIO_CHAN_SOFT_TIMESTAMP(4),
|
|
};
|
|
|
|
static const struct attribute_group kxsd9_attribute_group = {
|
|
.attrs = kxsd9_attributes,
|
|
};
|
|
|
|
static int kxsd9_power_up(struct kxsd9_state *st)
|
|
{
|
|
int ret;
|
|
|
|
/* Enable the regulators */
|
|
ret = regulator_bulk_enable(ARRAY_SIZE(st->regs), st->regs);
|
|
if (ret) {
|
|
dev_err(st->dev, "Cannot enable regulators\n");
|
|
return ret;
|
|
}
|
|
|
|
/* Power up */
|
|
ret = regmap_write(st->map,
|
|
KXSD9_REG_CTRL_B,
|
|
KXSD9_CTRL_B_ENABLE);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/*
|
|
* Set 1000Hz LPF, 2g fullscale, motion wakeup threshold 1g,
|
|
* latched wakeup
|
|
*/
|
|
ret = regmap_write(st->map,
|
|
KXSD9_REG_CTRL_C,
|
|
KXSD9_CTRL_C_LP_1000HZ |
|
|
KXSD9_CTRL_C_MOT_LEV |
|
|
KXSD9_CTRL_C_MOT_LAT |
|
|
st->scale);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/*
|
|
* Power-up time depends on the LPF setting, but typ 15.9 ms, let's
|
|
* set 20 ms to allow for some slack.
|
|
*/
|
|
msleep(20);
|
|
|
|
return 0;
|
|
};
|
|
|
|
static int kxsd9_power_down(struct kxsd9_state *st)
|
|
{
|
|
int ret;
|
|
|
|
/*
|
|
* Set into low power mode - since there may be more users of the
|
|
* regulators this is the first step of the power saving: it will
|
|
* make sure we conserve power even if there are others users on the
|
|
* regulators.
|
|
*/
|
|
ret = regmap_clear_bits(st->map, KXSD9_REG_CTRL_B, KXSD9_CTRL_B_ENABLE);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Disable the regulators */
|
|
ret = regulator_bulk_disable(ARRAY_SIZE(st->regs), st->regs);
|
|
if (ret) {
|
|
dev_err(st->dev, "Cannot disable regulators\n");
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct iio_info kxsd9_info = {
|
|
.read_raw = &kxsd9_read_raw,
|
|
.write_raw = &kxsd9_write_raw,
|
|
.attrs = &kxsd9_attribute_group,
|
|
};
|
|
|
|
/* Four channels apart from timestamp, scan mask = 0x0f */
|
|
static const unsigned long kxsd9_scan_masks[] = { 0xf, 0 };
|
|
|
|
int kxsd9_common_probe(struct device *dev,
|
|
struct regmap *map,
|
|
const char *name)
|
|
{
|
|
struct iio_dev *indio_dev;
|
|
struct kxsd9_state *st;
|
|
int ret;
|
|
|
|
indio_dev = devm_iio_device_alloc(dev, sizeof(*st));
|
|
if (!indio_dev)
|
|
return -ENOMEM;
|
|
|
|
st = iio_priv(indio_dev);
|
|
st->dev = dev;
|
|
st->map = map;
|
|
|
|
indio_dev->channels = kxsd9_channels;
|
|
indio_dev->num_channels = ARRAY_SIZE(kxsd9_channels);
|
|
indio_dev->name = name;
|
|
indio_dev->info = &kxsd9_info;
|
|
indio_dev->modes = INDIO_DIRECT_MODE;
|
|
indio_dev->available_scan_masks = kxsd9_scan_masks;
|
|
|
|
/* Read the mounting matrix, if present */
|
|
ret = iio_read_mount_matrix(dev, &st->orientation);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Fetch and turn on regulators */
|
|
st->regs[0].supply = kxsd9_reg_vdd;
|
|
st->regs[1].supply = kxsd9_reg_iovdd;
|
|
ret = devm_regulator_bulk_get(dev,
|
|
ARRAY_SIZE(st->regs),
|
|
st->regs);
|
|
if (ret) {
|
|
dev_err(dev, "Cannot get regulators\n");
|
|
return ret;
|
|
}
|
|
/* Default scaling */
|
|
st->scale = KXSD9_CTRL_C_FS_2G;
|
|
|
|
kxsd9_power_up(st);
|
|
|
|
ret = iio_triggered_buffer_setup(indio_dev,
|
|
iio_pollfunc_store_time,
|
|
kxsd9_trigger_handler,
|
|
&kxsd9_buffer_setup_ops);
|
|
if (ret) {
|
|
dev_err(dev, "triggered buffer setup failed\n");
|
|
goto err_power_down;
|
|
}
|
|
|
|
ret = iio_device_register(indio_dev);
|
|
if (ret)
|
|
goto err_cleanup_buffer;
|
|
|
|
dev_set_drvdata(dev, indio_dev);
|
|
|
|
/* Enable runtime PM */
|
|
pm_runtime_get_noresume(dev);
|
|
pm_runtime_set_active(dev);
|
|
pm_runtime_enable(dev);
|
|
/*
|
|
* Set autosuspend to two orders of magnitude larger than the
|
|
* start-up time. 20ms start-up time means 2000ms autosuspend,
|
|
* i.e. 2 seconds.
|
|
*/
|
|
pm_runtime_set_autosuspend_delay(dev, 2000);
|
|
pm_runtime_use_autosuspend(dev);
|
|
pm_runtime_put(dev);
|
|
|
|
return 0;
|
|
|
|
err_cleanup_buffer:
|
|
iio_triggered_buffer_cleanup(indio_dev);
|
|
err_power_down:
|
|
kxsd9_power_down(st);
|
|
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL_NS(kxsd9_common_probe, IIO_KXSD9);
|
|
|
|
void kxsd9_common_remove(struct device *dev)
|
|
{
|
|
struct iio_dev *indio_dev = dev_get_drvdata(dev);
|
|
struct kxsd9_state *st = iio_priv(indio_dev);
|
|
|
|
iio_triggered_buffer_cleanup(indio_dev);
|
|
iio_device_unregister(indio_dev);
|
|
pm_runtime_get_sync(dev);
|
|
pm_runtime_put_noidle(dev);
|
|
pm_runtime_disable(dev);
|
|
kxsd9_power_down(st);
|
|
}
|
|
EXPORT_SYMBOL_NS(kxsd9_common_remove, IIO_KXSD9);
|
|
|
|
static int kxsd9_runtime_suspend(struct device *dev)
|
|
{
|
|
struct iio_dev *indio_dev = dev_get_drvdata(dev);
|
|
struct kxsd9_state *st = iio_priv(indio_dev);
|
|
|
|
return kxsd9_power_down(st);
|
|
}
|
|
|
|
static int kxsd9_runtime_resume(struct device *dev)
|
|
{
|
|
struct iio_dev *indio_dev = dev_get_drvdata(dev);
|
|
struct kxsd9_state *st = iio_priv(indio_dev);
|
|
|
|
return kxsd9_power_up(st);
|
|
}
|
|
|
|
EXPORT_NS_RUNTIME_DEV_PM_OPS(kxsd9_dev_pm_ops, kxsd9_runtime_suspend,
|
|
kxsd9_runtime_resume, NULL, IIO_KXSD9);
|
|
|
|
MODULE_AUTHOR("Jonathan Cameron <jic23@kernel.org>");
|
|
MODULE_DESCRIPTION("Kionix KXSD9 driver");
|
|
MODULE_LICENSE("GPL v2");
|