linux/drivers/net/wireless/ath/ath9k
Sujith Manoharan c13a6a0535 ath9k: Use normal queues for offchannel frames
There is no reason why frames marked with
IEEE80211_TX_CTL_TX_OFFCHAN have to be sent using
the UAPSD queue. Since mac80211 makes sure that
RoC is done before pushing an offchannel frame
to the driver, we can use the normal TX queues
for transmission.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-26 17:11:08 -04:00
..
ahb.c ath9k: Initialize channel context ops on ahb probe 2014-07-29 10:32:57 -04:00
ani.c ath9k_hw: do not lower ANI setting below default on AR913x 2014-04-30 11:39:54 -04:00
ani.h ath9k_hw: tweak noise immunity thresholds for older chipsets 2014-03-03 15:35:55 -05:00
antenna.c ath9k: add support for reporting per-chain signal strength 2013-12-18 15:23:19 -05:00
ar953x_initvals.h ath9k_hw: Add QCA953x 2.0 initvals 2014-06-25 15:40:37 -04:00
ar955x_1p0_initvals.h ath9k: Remove AR955x INI duplicates 2013-12-09 15:37:57 -05:00
ar5008_initvals.h
ar5008_phy.c ath9k_hw: reduce ANI firstep range for older chips 2014-04-09 13:55:55 -04:00
ar9001_initvals.h
ar9002_calib.c
ar9002_hw.c ath9k: Register supported HW hang checks 2014-01-03 15:36:57 -05:00
ar9002_initvals.h
ar9002_mac.c ath9k: add duration field to ath_tx_status 2014-09-16 16:15:51 -04:00
ar9002_phy.c ath9k_hw: simplify spur channel handling 2013-12-18 15:23:27 -05:00
ar9002_phy.h
ar9003_2p2_initvals.h ath9k_hw: update ar9300 initvals 2014-04-30 12:13:15 -04:00
ar9003_buffalo_initvals.h ath9k: Use a separate TX gain table for WZR-HP-G450H 2013-12-09 15:37:58 -05:00
ar9003_calib.c ath9k: Calculate IQ-CAL median 2014-02-12 15:36:08 -05:00
ar9003_eeprom.c ath9k_hw: fix XPABIASLEVEL settings for AR9531 2014-06-25 15:40:38 -04:00
ar9003_eeprom.h ath9k: Update BaseExtension_1 eeprom structure 2013-12-18 15:23:44 -05:00
ar9003_hw.c ath9k_hw: Add QCA953x 2.0 initvals 2014-06-25 15:40:37 -04:00
ar9003_mac.c ath9k: add duration field to ath_tx_status 2014-09-16 16:15:51 -04:00
ar9003_mac.h
ar9003_mci.c
ar9003_mci.h
ar9003_paprd.c
ar9003_phy.c ath9k_hw: fix tx gain table index for AR953x 2014-06-25 15:40:38 -04:00
ar9003_phy.h ath9k: Fix regulatory compliance 2014-01-03 15:37:01 -05:00
ar9003_rtt.c
ar9003_rtt.h
ar9003_wow.c ath9k: Fix wow.c compilation 2013-12-02 14:24:53 -05:00
ar9330_1p1_initvals.h ath9k_hw: update ar9300 initvals 2014-04-30 12:13:15 -04:00
ar9330_1p2_initvals.h ath9k_hw: update ar9300 initvals 2014-04-30 12:13:15 -04:00
ar9340_initvals.h ath9k_hw: fix worse EVM for 11b rates 2014-04-30 12:13:16 -04:00
ar9462_2p0_initvals.h ath9k: Fix ETSI compliance for AR9462 2.0 2014-02-20 15:53:20 -05:00
ar9462_2p1_initvals.h ath9k: Remove duplicate initvals for AR9462 v2.1 2013-12-02 14:25:02 -05:00
ar9485_initvals.h ath9k: Identify duplicate AR9485 initvals 2013-12-09 15:37:59 -05:00
ar9565_1p0_initvals.h ath9k: Identify duplicate AR9565 v1.0 initvals 2013-12-09 15:38:00 -05:00
ar9565_1p1_initvals.h ath9k: Add initvals for AR9565 1.1 2013-12-02 14:25:01 -05:00
ar9580_1p0_initvals.h ath9k_hw: update ar9300 initvals 2014-04-30 12:13:15 -04:00
ath9k.h ath9k: Fix p2p address management 2014-09-26 17:06:51 -04:00
beacon.c ath9k: Fix interface accounting 2014-09-09 15:27:21 -04:00
btcoex.c ath9k_hw: clean up generic timer code 2013-12-18 15:23:22 -05:00
btcoex.h
calib.c
calib.h
channel.c ath9k: Cache BSS information 2014-09-26 17:06:49 -04:00
common-beacon.c ath9k: Calculate sleep duration 2014-07-01 14:26:26 -04:00
common-beacon.h ath9k: move ath9k_beacon_config_ap common 2014-03-17 13:13:08 -04:00
common-debug.c ath9k: move phy_err to ath9k_cmn_debug_phy_err 2014-05-13 15:56:42 -04:00
common-debug.h ath9k: move phy_err to ath9k_cmn_debug_phy_err 2014-05-13 15:56:42 -04:00
common-init.c ath9k: move ath9k_reload_chainmask_settings to common 2014-02-28 14:33:16 -05:00
common-init.h ath9k: move ath9k_reload_chainmask_settings to common 2014-02-28 14:33:16 -05:00
common.c ath9k: move ath9k_rx_skb_postprocess to common.c 2014-02-12 15:36:01 -05:00
common.h ath9k-common: create common-debug and move modal_eeprom to cmn 2014-05-13 15:56:36 -04:00
debug_sta.c ath9k: remove tid->paused flag 2014-04-30 11:42:35 -04:00
debug.c ath9k: add debugfs support for dynack 2014-09-16 16:18:40 -04:00
debug.h ath9k & ath9k_htc: move ath_rx_stats to cmn 2014-05-13 15:56:40 -04:00
dfs_debug.c ath9k: dfs_debug fix possible NULL dereference 2013-11-11 14:42:43 -05:00
dfs_debug.h ath9k: simplify DFS pulse interval debug printing 2014-05-29 13:08:10 -04:00
dfs.c ath9k: simplify DFS pulse interval debug printing 2014-05-29 13:08:10 -04:00
dfs.h ath9k/ath: move dfs pattern detector to ath 2013-10-18 14:03:54 -04:00
dynack.c ath9k: add dynamic ACK timeout estimation 2014-09-16 16:18:30 -04:00
dynack.h ath9k: add dynamic ACK timeout estimation 2014-09-16 16:18:30 -04:00
eeprom_4k.c ath9k_hw: simplify spur channel handling 2013-12-18 15:23:27 -05:00
eeprom_9287.c ath9k_hw: simplify spur channel handling 2013-12-18 15:23:27 -05:00
eeprom_def.c ath9k_hw: simplify spur channel handling 2013-12-18 15:23:27 -05:00
eeprom.c
eeprom.h
gpio.c ath9k_hw: clean up generic timer code 2013-12-18 15:23:22 -05:00
hif_usb.c ath9k_htc: Add device ID for Buffalo WLI-UV-AG300P 2014-02-12 15:36:04 -05:00
hif_usb.h
htc_drv_beacon.c ath9k_htc: move DEFAULT_SWBA_RESPONSE check to ath9k_htc_beacon_init 2014-03-17 13:13:09 -04:00
htc_drv_debug.c ath9k_htc: use ath9k_cmn_debug_phy_err 2014-05-13 15:56:43 -04:00
htc_drv_gpio.c ath9k_htc: reconfigure led_gpios after resume 2013-12-18 15:23:02 -05:00
htc_drv_init.c ath9k_htc: advertise support for TDLS 2014-08-28 14:39:23 -04:00
htc_drv_main.c mac80211: extend set_coverage_class signature 2014-09-05 13:54:07 +02:00
htc_drv_txrx.c ath9k & ath9k_htc: move ath_rx_stats to cmn 2014-05-13 15:56:40 -04:00
htc_hst.c ath9k_htc: catch fw panic pattern 2014-02-12 15:36:03 -05:00
htc_hst.h ath9k_htc: catch fw panic pattern 2014-02-12 15:36:03 -05:00
htc.h ath9k: fixup "ath9k_htc: fix build with disabled debug" 2014-05-20 15:36:15 -04:00
hw-ops.h ath9k: Move private HW callbacks to hw-ops.h 2014-01-03 15:36:58 -05:00
hw.c ath9k: enable ext channel pulse detection 2014-09-16 16:18:42 -04:00
hw.h ath9k: add dynamic ACK timeout estimation 2014-09-16 16:18:30 -04:00
init.c ath9k: Use a subroutine to assign HW queues 2014-09-09 15:27:22 -04:00
Kconfig ath9k: add config for (en|dis)abling ACK timeout estimation 2014-09-16 16:18:37 -04:00
link.c ath9k: Move beacon config to channel context 2014-06-19 15:49:18 -04:00
mac.c ath9k_hw: Abort transmission for sleeping station 2014-05-19 16:42:15 -04:00
mac.h ath9k: add duration field to ath_tx_status 2014-09-16 16:15:51 -04:00
main.c ath9k: Fix p2p address management 2014-09-26 17:06:51 -04:00
Makefile ath9k: add config for (en|dis)abling ACK timeout estimation 2014-09-16 16:18:37 -04:00
mci.c ath9k: Move caldata into channel context 2014-06-19 15:49:18 -04:00
mci.h
pci.c PCI: Remove DEFINE_PCI_DEVICE_TABLE macro use 2014-08-12 12:15:14 -06:00
phy.h
recv.c ath9k: Fix build error 2014-09-16 16:18:42 -04:00
reg.h ath9k_hw: Add QCA953x 2.0 initvals 2014-06-25 15:40:37 -04:00
spectral.c ath9k: fix wrong string size for strncmp in write_file_spec_scan_ctl() 2014-08-25 15:39:23 -04:00
spectral.h ath: Move spectral debugfs structs to shared header 2014-08-04 09:07:37 +03:00
tx99.c ath9k: Fix interface accounting 2014-09-09 15:27:21 -04:00
wmi.c
wmi.h
wow.c ath9k: Fix interface accounting 2014-09-09 15:27:21 -04:00
xmit.c ath9k: Use normal queues for offchannel frames 2014-09-26 17:11:08 -04:00