mirror of
https://github.com/torvalds/linux.git
synced 2024-12-23 11:21:33 +00:00
96f68023bf
Add the necessary documentation to support GICv3. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Mark Rutland <mark.rutland@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
80 lines
2.7 KiB
Plaintext
80 lines
2.7 KiB
Plaintext
* ARM Generic Interrupt Controller, version 3
|
|
|
|
AArch64 SMP cores are often associated with a GICv3, providing Private
|
|
Peripheral Interrupts (PPI), Shared Peripheral Interrupts (SPI),
|
|
Software Generated Interrupts (SGI), and Locality-specific Peripheral
|
|
Interrupts (LPI).
|
|
|
|
Main node required properties:
|
|
|
|
- compatible : should at least contain "arm,gic-v3".
|
|
- interrupt-controller : Identifies the node as an interrupt controller
|
|
- #interrupt-cells : Specifies the number of cells needed to encode an
|
|
interrupt source. Must be a single cell with a value of at least 3.
|
|
|
|
The 1st cell is the interrupt type; 0 for SPI interrupts, 1 for PPI
|
|
interrupts. Other values are reserved for future use.
|
|
|
|
The 2nd cell contains the interrupt number for the interrupt type.
|
|
SPI interrupts are in the range [0-987]. PPI interrupts are in the
|
|
range [0-15].
|
|
|
|
The 3rd cell is the flags, encoded as follows:
|
|
bits[3:0] trigger type and level flags.
|
|
1 = edge triggered
|
|
4 = level triggered
|
|
|
|
Cells 4 and beyond are reserved for future use. When the 1st cell
|
|
has a value of 0 or 1, cells 4 and beyond act as padding, and may be
|
|
ignored. It is recommended that padding cells have a value of 0.
|
|
|
|
- reg : Specifies base physical address(s) and size of the GIC
|
|
registers, in the following order:
|
|
- GIC Distributor interface (GICD)
|
|
- GIC Redistributors (GICR), one range per redistributor region
|
|
- GIC CPU interface (GICC)
|
|
- GIC Hypervisor interface (GICH)
|
|
- GIC Virtual CPU interface (GICV)
|
|
|
|
GICC, GICH and GICV are optional.
|
|
|
|
- interrupts : Interrupt source of the VGIC maintenance interrupt.
|
|
|
|
Optional
|
|
|
|
- redistributor-stride : If using padding pages, specifies the stride
|
|
of consecutive redistributors. Must be a multiple of 64kB.
|
|
|
|
- #redistributor-regions: The number of independent contiguous regions
|
|
occupied by the redistributors. Required if more than one such
|
|
region is present.
|
|
|
|
Examples:
|
|
|
|
gic: interrupt-controller@2cf00000 {
|
|
compatible = "arm,gic-v3";
|
|
#interrupt-cells = <3>;
|
|
interrupt-controller;
|
|
reg = <0x0 0x2f000000 0 0x10000>, // GICD
|
|
<0x0 0x2f100000 0 0x200000>, // GICR
|
|
<0x0 0x2c000000 0 0x2000>, // GICC
|
|
<0x0 0x2c010000 0 0x2000>, // GICH
|
|
<0x0 0x2c020000 0 0x2000>; // GICV
|
|
interrupts = <1 9 4>;
|
|
};
|
|
|
|
gic: interrupt-controller@2c010000 {
|
|
compatible = "arm,gic-v3";
|
|
#interrupt-cells = <3>;
|
|
interrupt-controller;
|
|
redistributor-stride = <0x0 0x40000>; // 256kB stride
|
|
#redistributor-regions = <2>;
|
|
reg = <0x0 0x2c010000 0 0x10000>, // GICD
|
|
<0x0 0x2d000000 0 0x800000>, // GICR 1: CPUs 0-31
|
|
<0x0 0x2e000000 0 0x800000>; // GICR 2: CPUs 32-63
|
|
<0x0 0x2c040000 0 0x2000>, // GICC
|
|
<0x0 0x2c060000 0 0x2000>, // GICH
|
|
<0x0 0x2c080000 0 0x2000>; // GICV
|
|
interrupts = <1 9 4>;
|
|
};
|