linux/drivers/media/platform/vsp1/vsp1_lif.c
Laurent Pinchart fc845e520b [media] v4l: vsp1: Support runtime modification of controls
Controls are applied to the hardware in the configure operation of the
VSP entities, which is only called when starting the video stream. To
enable runtime modification of controls we need to call the configure
operations for every frame. Doing so is currently not safe, as most
parameters shouldn't be modified during streaming. Furthermore the
configure operation can sleep, preventing it from being called from the
frame completion interrupt handler for the next frame.

Fix this by adding an argument to the configure operation to tell
entities whether to perform a full configuration (as done now) or a
partial runtime configuration. In the latter case the operation will
only configure the subset of parameters related to runtime-configurable
controls, and won't be allowed to sleep when doing so.

Because partial reconfiguration can depend on parameters computed when
performing a full configuration, the core guarantees that the configure
operation will always be called with full and partial modes in that
order at stream start. Entities thus don't have to duplicate
configuration steps in the full and partial code paths.

This change affects the VSP driver core only, all entities return
immediately from the configure operation when called for a partial
runtime configuration. Entities will be modified one by one in further
commits.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-06-28 12:23:43 -03:00

182 lines
4.9 KiB
C

/*
* vsp1_lif.c -- R-Car VSP1 LCD Controller Interface
*
* Copyright (C) 2013-2014 Renesas Electronics Corporation
*
* Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#include <linux/device.h>
#include <linux/gfp.h>
#include <media/v4l2-subdev.h>
#include "vsp1.h"
#include "vsp1_dl.h"
#include "vsp1_lif.h"
#define LIF_MIN_SIZE 2U
#define LIF_MAX_SIZE 8190U
/* -----------------------------------------------------------------------------
* Device Access
*/
static inline void vsp1_lif_write(struct vsp1_lif *lif, struct vsp1_dl_list *dl,
u32 reg, u32 data)
{
vsp1_dl_list_write(dl, reg, data);
}
/* -----------------------------------------------------------------------------
* V4L2 Subdevice Operations
*/
static int lif_enum_mbus_code(struct v4l2_subdev *subdev,
struct v4l2_subdev_pad_config *cfg,
struct v4l2_subdev_mbus_code_enum *code)
{
static const unsigned int codes[] = {
MEDIA_BUS_FMT_ARGB8888_1X32,
MEDIA_BUS_FMT_AYUV8_1X32,
};
return vsp1_subdev_enum_mbus_code(subdev, cfg, code, codes,
ARRAY_SIZE(codes));
}
static int lif_enum_frame_size(struct v4l2_subdev *subdev,
struct v4l2_subdev_pad_config *cfg,
struct v4l2_subdev_frame_size_enum *fse)
{
return vsp1_subdev_enum_frame_size(subdev, cfg, fse, LIF_MIN_SIZE,
LIF_MIN_SIZE, LIF_MAX_SIZE,
LIF_MAX_SIZE);
}
static int lif_set_format(struct v4l2_subdev *subdev,
struct v4l2_subdev_pad_config *cfg,
struct v4l2_subdev_format *fmt)
{
struct vsp1_lif *lif = to_lif(subdev);
struct v4l2_subdev_pad_config *config;
struct v4l2_mbus_framefmt *format;
config = vsp1_entity_get_pad_config(&lif->entity, cfg, fmt->which);
if (!config)
return -EINVAL;
/* Default to YUV if the requested format is not supported. */
if (fmt->format.code != MEDIA_BUS_FMT_ARGB8888_1X32 &&
fmt->format.code != MEDIA_BUS_FMT_AYUV8_1X32)
fmt->format.code = MEDIA_BUS_FMT_AYUV8_1X32;
format = vsp1_entity_get_pad_format(&lif->entity, config, fmt->pad);
if (fmt->pad == LIF_PAD_SOURCE) {
/* The LIF source format is always identical to its sink
* format.
*/
fmt->format = *format;
return 0;
}
format->code = fmt->format.code;
format->width = clamp_t(unsigned int, fmt->format.width,
LIF_MIN_SIZE, LIF_MAX_SIZE);
format->height = clamp_t(unsigned int, fmt->format.height,
LIF_MIN_SIZE, LIF_MAX_SIZE);
format->field = V4L2_FIELD_NONE;
format->colorspace = V4L2_COLORSPACE_SRGB;
fmt->format = *format;
/* Propagate the format to the source pad. */
format = vsp1_entity_get_pad_format(&lif->entity, config,
LIF_PAD_SOURCE);
*format = fmt->format;
return 0;
}
static const struct v4l2_subdev_pad_ops lif_pad_ops = {
.init_cfg = vsp1_entity_init_cfg,
.enum_mbus_code = lif_enum_mbus_code,
.enum_frame_size = lif_enum_frame_size,
.get_fmt = vsp1_subdev_get_pad_format,
.set_fmt = lif_set_format,
};
static const struct v4l2_subdev_ops lif_ops = {
.pad = &lif_pad_ops,
};
/* -----------------------------------------------------------------------------
* VSP1 Entity Operations
*/
static void lif_configure(struct vsp1_entity *entity,
struct vsp1_pipeline *pipe,
struct vsp1_dl_list *dl, bool full)
{
const struct v4l2_mbus_framefmt *format;
struct vsp1_lif *lif = to_lif(&entity->subdev);
unsigned int hbth = 1300;
unsigned int obth = 400;
unsigned int lbth = 200;
if (!full)
return;
format = vsp1_entity_get_pad_format(&lif->entity, lif->entity.config,
LIF_PAD_SOURCE);
obth = min(obth, (format->width + 1) / 2 * format->height - 4);
vsp1_lif_write(lif, dl, VI6_LIF_CSBTH,
(hbth << VI6_LIF_CSBTH_HBTH_SHIFT) |
(lbth << VI6_LIF_CSBTH_LBTH_SHIFT));
vsp1_lif_write(lif, dl, VI6_LIF_CTRL,
(obth << VI6_LIF_CTRL_OBTH_SHIFT) |
(format->code == 0 ? VI6_LIF_CTRL_CFMT : 0) |
VI6_LIF_CTRL_REQSEL | VI6_LIF_CTRL_LIF_EN);
}
static const struct vsp1_entity_operations lif_entity_ops = {
.configure = lif_configure,
};
/* -----------------------------------------------------------------------------
* Initialization and Cleanup
*/
struct vsp1_lif *vsp1_lif_create(struct vsp1_device *vsp1)
{
struct vsp1_lif *lif;
int ret;
lif = devm_kzalloc(vsp1->dev, sizeof(*lif), GFP_KERNEL);
if (lif == NULL)
return ERR_PTR(-ENOMEM);
lif->entity.ops = &lif_entity_ops;
lif->entity.type = VSP1_ENTITY_LIF;
/* The LIF is never exposed to userspace, but media entity registration
* requires a function to be set. Use PROC_VIDEO_PIXEL_FORMATTER just to
* avoid triggering a WARN_ON(), the value won't be seen anywhere.
*/
ret = vsp1_entity_init(vsp1, &lif->entity, "lif", 2, &lif_ops,
MEDIA_ENT_F_PROC_VIDEO_PIXEL_FORMATTER);
if (ret < 0)
return ERR_PTR(ret);
return lif;
}