Minki/linux
1
0
Fork 1
mirror of https://github.com/torvalds/linux.git synced 2024-12-23 19:31:53 +00:00
Code Issues Packages Projects Releases Wiki Activity
bf82322ec5
linux/drivers/char/tty_io.c
Domen Puncer b20f3ae5f0 [PATCH] char/tty_io: replace schedule_timeout() with msleep_interruptible() 
Use msleep_interruptible() instead of schedule_timeout() in send_break() to
guarantee the task delays as expected.  Change @duration's units to
milliseconds, and modify arguments in callers appropriately.  Patch is
compile-tested.

Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Domen Puncer <domen@coderock.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:58 -07:00

2992 lines
74 KiB
C
Raw Blame History

/*
* linux/drivers/char/tty_io.c
*
* Copyright (C) 1991, 1992 Linus Torvalds
*/
/*
* 'tty_io.c' gives an orthogonal feeling to tty's, be they consoles
* or rs-channels. It also implements echoing, cooked mode etc.
*
* Kill-line thanks to John T Kohl, who also corrected VMIN = VTIME = 0.
*
* Modified by Theodore Ts'o, 9/14/92, to dynamically allocate the
* tty_struct and tty_queue structures. Previously there was an array
* of 256 tty_struct's which was statically allocated, and the
* tty_queue structures were allocated at boot time. Both are now
* dynamically allocated only when the tty is open.
*
* Also restructured routines so that there is more of a separation
* between the high-level tty routines (tty_io.c and tty_ioctl.c) and
* the low-level tty routines (serial.c, pty.c, console.c). This
* makes for cleaner and more compact code. -TYT, 9/17/92
*
* Modified by Fred N. van Kempen, 01/29/93, to add line disciplines
* which can be dynamically activated and de-activated by the line
* discipline handling modules (like SLIP).
*
* NOTE: pay no attention to the line discipline code (yet); its
* interface is still subject to change in this version...
* -- TYT, 1/31/92
*
* Added functionality to the OPOST tty handling. No delays, but all
* other bits should be there.
* -- Nick Holloway <alfie@dcs.warwick.ac.uk>, 27th May 1993.
*
* Rewrote canonical mode and added more termios flags.
* -- julian@uhunix.uhcc.hawaii.edu (J. Cowley), 13Jan94
*
* Reorganized FASYNC support so mouse code can share it.
* -- ctm@ardi.com, 9Sep95
*
* New TIOCLINUX variants added.
* -- mj@k332.feld.cvut.cz, 19-Nov-95
*
* Restrict vt switching via ioctl()
* -- grif@cs.ucr.edu, 5-Dec-95
*
* Move console and virtual terminal code to more appropriate files,
* implement CONFIG_VT and generalize console device interface.
* -- Marko Kohtala <Marko.Kohtala@hut.fi>, March 97
*
* Rewrote init_dev and release_dev to eliminate races.
* -- Bill Hawes <whawes@star.net>, June 97
*
* Added devfs support.
* -- C. Scott Ananian <cananian@alumni.princeton.edu>, 13-Jan-1998
*
* Added support for a Unix98-style ptmx device.
* -- C. Scott Ananian <cananian@alumni.princeton.edu>, 14-Jan-1998
*
* Reduced memory usage for older ARM systems
* -- Russell King <rmk@arm.linux.org.uk>
*
* Move do_SAK() into process context. Less stack use in devfs functions.
* alloc_tty_struct() always uses kmalloc() -- Andrew Morton <andrewm@uow.edu.eu> 17Mar01
*/
#include <linux/config.h>
#include <linux/types.h>
#include <linux/major.h>
#include <linux/errno.h>
#include <linux/signal.h>
#include <linux/fcntl.h>
#include <linux/sched.h>
#include <linux/interrupt.h>
#include <linux/tty.h>
#include <linux/tty_driver.h>
#include <linux/tty_flip.h>
#include <linux/devpts_fs.h>
#include <linux/file.h>
#include <linux/console.h>
#include <linux/timer.h>
#include <linux/ctype.h>
#include <linux/kd.h>
#include <linux/mm.h>
#include <linux/string.h>
#include <linux/slab.h>
#include <linux/poll.h>
#include <linux/proc_fs.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/smp_lock.h>
#include <linux/device.h>
#include <linux/idr.h>
#include <linux/wait.h>
#include <linux/bitops.h>
#include <linux/delay.h>
#include <asm/uaccess.h>
#include <asm/system.h>
#include <linux/kbd_kern.h>
#include <linux/vt_kern.h>
#include <linux/selection.h>
#include <linux/devfs_fs_kernel.h>
#include <linux/kmod.h>
#undef TTY_DEBUG_HANGUP
#define TTY_PARANOIA_CHECK 1
#define CHECK_TTY_COUNT 1
struct termios tty_std_termios = { /* for the benefit of tty drivers */
.c_iflag = ICRNL | IXON,
.c_oflag = OPOST | ONLCR,
.c_cflag = B38400 | CS8 | CREAD | HUPCL,
.c_lflag = ISIG | ICANON | ECHO | ECHOE | ECHOK |
ECHOCTL | ECHOKE | IEXTEN,
.c_cc = INIT_C_CC
};
EXPORT_SYMBOL(tty_std_termios);
/* This list gets poked at by procfs and various bits of boot up code. This
could do with some rationalisation such as pulling the tty proc function
into this file */
LIST_HEAD(tty_drivers); /* linked list of tty drivers */
/* Semaphore to protect creating and releasing a tty. This is shared with
vt.c for deeply disgusting hack reasons */
DECLARE_MUTEX(tty_sem);
#ifdef CONFIG_UNIX98_PTYS
extern struct tty_driver *ptm_driver; /* Unix98 pty masters; for /dev/ptmx */
extern int pty_limit; /* Config limit on Unix98 ptys */
static DEFINE_IDR(allocated_ptys);
static DECLARE_MUTEX(allocated_ptys_lock);
static int ptmx_open(struct inode *, struct file *);
#endif
extern void disable_early_printk(void);
static void initialize_tty_struct(struct tty_struct *tty);
static ssize_t tty_read(struct file *, char __user *, size_t, loff_t *);
static ssize_t tty_write(struct file *, const char __user *, size_t, loff_t *);
ssize_t redirected_tty_write(struct file *, const char __user *, size_t, loff_t *);
static unsigned int tty_poll(struct file *, poll_table *);
static int tty_open(struct inode *, struct file *);
static int tty_release(struct inode *, struct file *);
int tty_ioctl(struct inode * inode, struct file * file,
unsigned int cmd, unsigned long arg);
static int tty_fasync(int fd, struct file * filp, int on);
extern void rs_360_init(void);
static void release_mem(struct tty_struct *tty, int idx);
static struct tty_struct *alloc_tty_struct(void)
{
struct tty_struct *tty;
tty = kmalloc(sizeof(struct tty_struct), GFP_KERNEL);
if (tty)
memset(tty, 0, sizeof(struct tty_struct));
return tty;
}
static inline void free_tty_struct(struct tty_struct *tty)
{
kfree(tty->write_buf);
kfree(tty);
}
#define TTY_NUMBER(tty) ((tty)->index + (tty)->driver->name_base)
char *tty_name(struct tty_struct *tty, char *buf)
{
if (!tty) /* Hmm. NULL pointer. That's fun. */
strcpy(buf, "NULL tty");
else
strcpy(buf, tty->name);
return buf;
}
EXPORT_SYMBOL(tty_name);
int tty_paranoia_check(struct tty_struct *tty, struct inode *inode,
const char *routine)
{
#ifdef TTY_PARANOIA_CHECK
if (!tty) {
printk(KERN_WARNING
"null TTY for (%d:%d) in %s\n",
imajor(inode), iminor(inode), routine);
return 1;
}
if (tty->magic != TTY_MAGIC) {
printk(KERN_WARNING
"bad magic number for tty struct (%d:%d) in %s\n",
imajor(inode), iminor(inode), routine);
return 1;
}
#endif
return 0;
}
static int check_tty_count(struct tty_struct *tty, const char *routine)
{
#ifdef CHECK_TTY_COUNT
struct list_head *p;
int count = 0;
file_list_lock();
list_for_each(p, &tty->tty_files) {
count++;
}
file_list_unlock();
if (tty->driver->type == TTY_DRIVER_TYPE_PTY &&
tty->driver->subtype == PTY_TYPE_SLAVE &&
tty->link && tty->link->count)
count++;
if (tty->count != count) {
printk(KERN_WARNING "Warning: dev (%s) tty->count(%d) "
"!= #fd's(%d) in %s\n",
tty->name, tty->count, count, routine);
return count;
}
#endif
return 0;
}
/*
* This is probably overkill for real world processors but
* they are not on hot paths so a little discipline won't do
* any harm.
*/
static void tty_set_termios_ldisc(struct tty_struct *tty, int num)
{
down(&tty->termios_sem);
tty->termios->c_line = num;
up(&tty->termios_sem);
}
/*
* This guards the refcounted line discipline lists. The lock
* must be taken with irqs off because there are hangup path
* callers who will do ldisc lookups and cannot sleep.
*/
static DEFINE_SPINLOCK(tty_ldisc_lock);
static DECLARE_WAIT_QUEUE_HEAD(tty_ldisc_wait);
static struct tty_ldisc tty_ldiscs[NR_LDISCS]; /* line disc dispatch table */
int tty_register_ldisc(int disc, struct tty_ldisc *new_ldisc)
{
unsigned long flags;
int ret = 0;
if (disc < N_TTY || disc >= NR_LDISCS)
return -EINVAL;
spin_lock_irqsave(&tty_ldisc_lock, flags);
tty_ldiscs[disc] = *new_ldisc;
tty_ldiscs[disc].num = disc;
tty_ldiscs[disc].flags |= LDISC_FLAG_DEFINED;
tty_ldiscs[disc].refcount = 0;
spin_unlock_irqrestore(&tty_ldisc_lock, flags);
return ret;
}
EXPORT_SYMBOL(tty_register_ldisc);
int tty_unregister_ldisc(int disc)
{
unsigned long flags;
int ret = 0;
if (disc < N_TTY || disc >= NR_LDISCS)
return -EINVAL;
spin_lock_irqsave(&tty_ldisc_lock, flags);
if (tty_ldiscs[disc].refcount)
ret = -EBUSY;
else
tty_ldiscs[disc].flags &= ~LDISC_FLAG_DEFINED;
spin_unlock_irqrestore(&tty_ldisc_lock, flags);
return ret;
}
EXPORT_SYMBOL(tty_unregister_ldisc);
struct tty_ldisc *tty_ldisc_get(int disc)
{
unsigned long flags;
struct tty_ldisc *ld;
if (disc < N_TTY || disc >= NR_LDISCS)
return NULL;
spin_lock_irqsave(&tty_ldisc_lock, flags);
ld = &tty_ldiscs[disc];
/* Check the entry is defined */
if(ld->flags & LDISC_FLAG_DEFINED)
{
/* If the module is being unloaded we can't use it */
if (!try_module_get(ld->owner))
ld = NULL;
else /* lock it */
ld->refcount++;
}
else
ld = NULL;
spin_unlock_irqrestore(&tty_ldisc_lock, flags);
return ld;
}
EXPORT_SYMBOL_GPL(tty_ldisc_get);
void tty_ldisc_put(int disc)
{
struct tty_ldisc *ld;
unsigned long flags;
if (disc < N_TTY || disc >= NR_LDISCS)
BUG();
spin_lock_irqsave(&tty_ldisc_lock, flags);
ld = &tty_ldiscs[disc];
if(ld->refcount == 0)
BUG();
ld->refcount --;
module_put(ld->owner);
spin_unlock_irqrestore(&tty_ldisc_lock, flags);
}
EXPORT_SYMBOL_GPL(tty_ldisc_put);
static void tty_ldisc_assign(struct tty_struct *tty, struct tty_ldisc *ld)
{
tty->ldisc = *ld;
tty->ldisc.refcount = 0;
}
/**
* tty_ldisc_try - internal helper
* @tty: the tty
*
* Make a single attempt to grab and bump the refcount on
* the tty ldisc. Return 0 on failure or 1 on success. This is
* used to implement both the waiting and non waiting versions
* of tty_ldisc_ref
*/
static int tty_ldisc_try(struct tty_struct *tty)
{
unsigned long flags;
struct tty_ldisc *ld;
int ret = 0;
spin_lock_irqsave(&tty_ldisc_lock, flags);
ld = &tty->ldisc;
if(test_bit(TTY_LDISC, &tty->flags))
{
ld->refcount++;
ret = 1;
}
spin_unlock_irqrestore(&tty_ldisc_lock, flags);
return ret;
}
/**
* tty_ldisc_ref_wait - wait for the tty ldisc
* @tty: tty device
*
* Dereference the line discipline for the terminal and take a
* reference to it. If the line discipline is in flux then
* wait patiently until it changes.
*
* Note: Must not be called from an IRQ/timer context. The caller
* must also be careful not to hold other locks that will deadlock
* against a discipline change, such as an existing ldisc reference
* (which we check for)
*/
struct tty_ldisc *tty_ldisc_ref_wait(struct tty_struct *tty)
{
/* wait_event is a macro */
wait_event(tty_ldisc_wait, tty_ldisc_try(tty));
if(tty->ldisc.refcount == 0)
printk(KERN_ERR "tty_ldisc_ref_wait\n");
return &tty->ldisc;
}
EXPORT_SYMBOL_GPL(tty_ldisc_ref_wait);
/**
* tty_ldisc_ref - get the tty ldisc
* @tty: tty device
*
* Dereference the line discipline for the terminal and take a
* reference to it. If the line discipline is in flux then
* return NULL. Can be called from IRQ and timer functions.
*/
struct tty_ldisc *tty_ldisc_ref(struct tty_struct *tty)
{
if(tty_ldisc_try(tty))
return &tty->ldisc;
return NULL;
}
EXPORT_SYMBOL_GPL(tty_ldisc_ref);
/**
* tty_ldisc_deref - free a tty ldisc reference
* @ld: reference to free up
*
* Undoes the effect of tty_ldisc_ref or tty_ldisc_ref_wait. May
* be called in IRQ context.
*/
void tty_ldisc_deref(struct tty_ldisc *ld)
{
unsigned long flags;
if(ld == NULL)
BUG();
spin_lock_irqsave(&tty_ldisc_lock, flags);
if(ld->refcount == 0)
printk(KERN_ERR "tty_ldisc_deref: no references.\n");
else
ld->refcount--;
if(ld->refcount == 0)
wake_up(&tty_ldisc_wait);
spin_unlock_irqrestore(&tty_ldisc_lock, flags);
}
EXPORT_SYMBOL_GPL(tty_ldisc_deref);
/**
* tty_ldisc_enable - allow ldisc use
* @tty: terminal to activate ldisc on
*
* Set the TTY_LDISC flag when the line discipline can be called
* again. Do neccessary wakeups for existing sleepers.
*
* Note: nobody should set this bit except via this function. Clearing
* directly is allowed.
*/
static void tty_ldisc_enable(struct tty_struct *tty)
{
set_bit(TTY_LDISC, &tty->flags);
wake_up(&tty_ldisc_wait);
}
/**
* tty_set_ldisc - set line discipline
* @tty: the terminal to set
* @ldisc: the line discipline
*
* Set the discipline of a tty line. Must be called from a process
* context.
*/
static int tty_set_ldisc(struct tty_struct *tty, int ldisc)
{
int retval = 0;
struct tty_ldisc o_ldisc;
char buf[64];
int work;
unsigned long flags;
struct tty_ldisc *ld;
if ((ldisc < N_TTY) || (ldisc >= NR_LDISCS))
return -EINVAL;
restart:
if (tty->ldisc.num == ldisc)
return 0; /* We are already in the desired discipline */
ld = tty_ldisc_get(ldisc);
/* Eduardo Blanco <ejbs@cs.cs.com.uy> */
/* Cyrus Durgin <cider@speakeasy.org> */
if (ld == NULL) {
request_module("tty-ldisc-%d", ldisc);
ld = tty_ldisc_get(ldisc);
}
if (ld == NULL)
return -EINVAL;
o_ldisc = tty->ldisc;
tty_wait_until_sent(tty, 0);
/*
* Make sure we don't change while someone holds a
* reference to the line discipline. The TTY_LDISC bit
* prevents anyone taking a reference once it is clear.
* We need the lock to avoid racing reference takers.
*/
spin_lock_irqsave(&tty_ldisc_lock, flags);
if(tty->ldisc.refcount)
{
/* Free the new ldisc we grabbed. Must drop the lock
first. */
spin_unlock_irqrestore(&tty_ldisc_lock, flags);
tty_ldisc_put(ldisc);
/*
* There are several reasons we may be busy, including
* random momentary I/O traffic. We must therefore
* retry. We could distinguish between blocking ops
* and retries if we made tty_ldisc_wait() smarter. That
* is up for discussion.
*/
if(wait_event_interruptible(tty_ldisc_wait, tty->ldisc.refcount == 0) < 0)
return -ERESTARTSYS;
goto restart;
}
clear_bit(TTY_LDISC, &tty->flags);
clear_bit(TTY_DONT_FLIP, &tty->flags);
spin_unlock_irqrestore(&tty_ldisc_lock, flags);
/*
* From this point on we know nobody has an ldisc
* usage reference, nor can they obtain one until
* we say so later on.
*/
work = cancel_delayed_work(&tty->flip.work);
/*
* Wait for ->hangup_work and ->flip.work handlers to terminate
*/
flush_scheduled_work();
/* Shutdown the current discipline. */
if (tty->ldisc.close)
(tty->ldisc.close)(tty);
/* Now set up the new line discipline. */
tty_ldisc_assign(tty, ld);
tty_set_termios_ldisc(tty, ldisc);
if (tty->ldisc.open)
retval = (tty->ldisc.open)(tty);
if (retval < 0) {
tty_ldisc_put(ldisc);
/* There is an outstanding reference here so this is safe */
tty_ldisc_assign(tty, tty_ldisc_get(o_ldisc.num));
tty_set_termios_ldisc(tty, tty->ldisc.num);
if (tty->ldisc.open && (tty->ldisc.open(tty) < 0)) {
tty_ldisc_put(o_ldisc.num);
/* This driver is always present */
tty_ldisc_assign(tty, tty_ldisc_get(N_TTY));
tty_set_termios_ldisc(tty, N_TTY);
if (tty->ldisc.open) {
int r = tty->ldisc.open(tty);
if (r < 0)
panic("Couldn't open N_TTY ldisc for "
"%s --- error %d.",
tty_name(tty, buf), r);
}
}
}
/* At this point we hold a reference to the new ldisc and a
a reference to the old ldisc. If we ended up flipping back
to the existing ldisc we have two references to it */
if (tty->ldisc.num != o_ldisc.num && tty->driver->set_ldisc)
tty->driver->set_ldisc(tty);
tty_ldisc_put(o_ldisc.num);
/*
* Allow ldisc referencing to occur as soon as the driver
* ldisc callback completes.
*/
tty_ldisc_enable(tty);
/* Restart it in case no characters kick it off. Safe if
already running */
if(work)
schedule_delayed_work(&tty->flip.work, 1);
return retval;
}
/*
* This routine returns a tty driver structure, given a device number
*/
static struct tty_driver *get_tty_driver(dev_t device, int *index)
{
struct tty_driver *p;
list_for_each_entry(p, &tty_drivers, tty_drivers) {
dev_t base = MKDEV(p->major, p->minor_start);
if (device < base || device >= base + p->num)
continue;
*index = device - base;
return p;
}
return NULL;
}
/*
* If we try to write to, or set the state of, a terminal and we're
* not in the foreground, send a SIGTTOU. If the signal is blocked or
* ignored, go ahead and perform the operation. (POSIX 7.2)
*/
int tty_check_change(struct tty_struct * tty)
{
if (current->signal->tty != tty)
return 0;
if (tty->pgrp <= 0) {
printk(KERN_WARNING "tty_check_change: tty->pgrp <= 0!\n");
return 0;
}
if (process_group(current) == tty->pgrp)
return 0;
if (is_ignored(SIGTTOU))
return 0;
if (is_orphaned_pgrp(process_group(current)))
return -EIO;
(void) kill_pg(process_group(current), SIGTTOU, 1);
return -ERESTARTSYS;
}
EXPORT_SYMBOL(tty_check_change);
static ssize_t hung_up_tty_read(struct file * file, char __user * buf,
size_t count, loff_t *ppos)
{
return 0;
}
static ssize_t hung_up_tty_write(struct file * file, const char __user * buf,
size_t count, loff_t *ppos)
{
return -EIO;
}
/* No kernel lock held - none needed ;) */
static unsigned int hung_up_tty_poll(struct file * filp, poll_table * wait)
{
return POLLIN | POLLOUT | POLLERR | POLLHUP | POLLRDNORM | POLLWRNORM;
}
static int hung_up_tty_ioctl(struct inode * inode, struct file * file,
unsigned int cmd, unsigned long arg)
{
return cmd == TIOCSPGRP ? -ENOTTY : -EIO;
}
static struct file_operations tty_fops = {
.llseek = no_llseek,
.read = tty_read,
.write = tty_write,
.poll = tty_poll,
.ioctl = tty_ioctl,
.open = tty_open,
.release = tty_release,
.fasync = tty_fasync,
};
#ifdef CONFIG_UNIX98_PTYS
static struct file_operations ptmx_fops = {
.llseek = no_llseek,
.read = tty_read,
.write = tty_write,
.poll = tty_poll,
.ioctl = tty_ioctl,
.open = ptmx_open,
.release = tty_release,
.fasync = tty_fasync,
};
#endif
static struct file_operations console_fops = {
.llseek = no_llseek,
.read = tty_read,
.write = redirected_tty_write,
.poll = tty_poll,
.ioctl = tty_ioctl,
.open = tty_open,
.release = tty_release,
.fasync = tty_fasync,
};
static struct file_operations hung_up_tty_fops = {
.llseek = no_llseek,
.read = hung_up_tty_read,
.write = hung_up_tty_write,
.poll = hung_up_tty_poll,
.ioctl = hung_up_tty_ioctl,
.release = tty_release,
};
static DEFINE_SPINLOCK(redirect_lock);
static struct file *redirect;
/**
* tty_wakeup - request more data
* @tty: terminal
*
* Internal and external helper for wakeups of tty. This function
* informs the line discipline if present that the driver is ready
* to receive more output data.
*/
void tty_wakeup(struct tty_struct *tty)
{
struct tty_ldisc *ld;
if (test_bit(TTY_DO_WRITE_WAKEUP, &tty->flags)) {
ld = tty_ldisc_ref(tty);
if(ld) {
if(ld->write_wakeup)
ld->write_wakeup(tty);
tty_ldisc_deref(ld);
}
}
wake_up_interruptible(&tty->write_wait);
}
EXPORT_SYMBOL_GPL(tty_wakeup);
/**
* tty_ldisc_flush - flush line discipline queue
* @tty: tty
*
* Flush the line discipline queue (if any) for this tty. If there
* is no line discipline active this is a no-op.
*/
void tty_ldisc_flush(struct tty_struct *tty)
{
struct tty_ldisc *ld = tty_ldisc_ref(tty);
if(ld) {
if(ld->flush_buffer)
ld->flush_buffer(tty);
tty_ldisc_deref(ld);
}
}
EXPORT_SYMBOL_GPL(tty_ldisc_flush);
/*
* This can be called by the "eventd" kernel thread. That is process synchronous,
* but doesn't hold any locks, so we need to make sure we have the appropriate
* locks for what we're doing..
*/
static void do_tty_hangup(void *data)
{
struct tty_struct *tty = (struct tty_struct *) data;
struct file * cons_filp = NULL;
struct file *filp, *f = NULL;
struct task_struct *p;
struct tty_ldisc *ld;
int closecount = 0, n;
if (!tty)
return;
/* inuse_filps is protected by the single kernel lock */
lock_kernel();
spin_lock(&redirect_lock);
if (redirect && redirect->private_data == tty) {
f = redirect;
redirect = NULL;
}
spin_unlock(&redirect_lock);
check_tty_count(tty, "do_tty_hangup");
file_list_lock();
/* This breaks for file handles being sent over AF_UNIX sockets ? */
list_for_each_entry(filp, &tty->tty_files, f_list) {
if (filp->f_op->write == redirected_tty_write)
cons_filp = filp;
if (filp->f_op->write != tty_write)
continue;
closecount++;
tty_fasync(-1, filp, 0); /* can't block */
filp->f_op = &hung_up_tty_fops;
}
file_list_unlock();
/* FIXME! What are the locking issues here? This may me overdoing things..
* this question is especially important now that we've removed the irqlock. */
ld = tty_ldisc_ref(tty);
if(ld != NULL) /* We may have no line discipline at this point */
{
if (ld->flush_buffer)
ld->flush_buffer(tty);
if (tty->driver->flush_buffer)
tty->driver->flush_buffer(tty);
if ((test_bit(TTY_DO_WRITE_WAKEUP, &tty->flags)) &&
ld->write_wakeup)
ld->write_wakeup(tty);
if (ld->hangup)
ld->hangup(tty);
}
/* FIXME: Once we trust the LDISC code better we can wait here for
ldisc completion and fix the driver call race */
wake_up_interruptible(&tty->write_wait);
wake_up_interruptible(&tty->read_wait);
/*
* Shutdown the current line discipline, and reset it to
* N_TTY.
*/
if (tty->driver->flags & TTY_DRIVER_RESET_TERMIOS)
{
down(&tty->termios_sem);
*tty->termios = tty->driver->init_termios;
up(&tty->termios_sem);
}
/* Defer ldisc switch */
/* tty_deferred_ldisc_switch(N_TTY);
This should get done automatically when the port closes and
tty_release is called */
read_lock(&tasklist_lock);
if (tty->session > 0) {
do_each_task_pid(tty->session, PIDTYPE_SID, p) {
if (p->signal->tty == tty)
p->signal->tty = NULL;
if (!p->signal->leader)
continue;
send_group_sig_info(SIGHUP, SEND_SIG_PRIV, p);
send_group_sig_info(SIGCONT, SEND_SIG_PRIV, p);
if (tty->pgrp > 0)
p->signal->tty_old_pgrp = tty->pgrp;
} while_each_task_pid(tty->session, PIDTYPE_SID, p);
}
read_unlock(&tasklist_lock);
tty->flags = 0;
tty->session = 0;
tty->pgrp = -1;
tty->ctrl_status = 0;
/*
* If one of the devices matches a console pointer, we
* cannot just call hangup() because that will cause
* tty->count and state->count to go out of sync.
* So we just call close() the right number of times.
*/
if (cons_filp) {
if (tty->driver->close)
for (n = 0; n < closecount; n++)
tty->driver->close(tty, cons_filp);
} else if (tty->driver->hangup)
(tty->driver->hangup)(tty);
/* We don't want to have driver/ldisc interactions beyond
the ones we did here. The driver layer expects no
calls after ->hangup() from the ldisc side. However we
can't yet guarantee all that */
set_bit(TTY_HUPPED, &tty->flags);
if (ld) {
tty_ldisc_enable(tty);
tty_ldisc_deref(ld);
}
unlock_kernel();
if (f)
fput(f);
}
void tty_hangup(struct tty_struct * tty)
{
#ifdef TTY_DEBUG_HANGUP
char buf[64];
printk(KERN_DEBUG "%s hangup...\n", tty_name(tty, buf));
#endif
schedule_work(&tty->hangup_work);
}
EXPORT_SYMBOL(tty_hangup);
void tty_vhangup(struct tty_struct * tty)
{
#ifdef TTY_DEBUG_HANGUP
char buf[64];
printk(KERN_DEBUG "%s vhangup...\n", tty_name(tty, buf));
#endif
do_tty_hangup((void *) tty);
}
EXPORT_SYMBOL(tty_vhangup);
int tty_hung_up_p(struct file * filp)
{
return (filp->f_op == &hung_up_tty_fops);
}
EXPORT_SYMBOL(tty_hung_up_p);
/*
* This function is typically called only by the session leader, when
* it wants to disassociate itself from its controlling tty.
*
* It performs the following functions:
* (1) Sends a SIGHUP and SIGCONT to the foreground process group
* (2) Clears the tty from being controlling the session
* (3) Clears the controlling tty for all processes in the
* session group.
*
* The argument on_exit is set to 1 if called when a process is
* exiting; it is 0 if called by the ioctl TIOCNOTTY.
*/
void disassociate_ctty(int on_exit)
{
struct tty_struct *tty;
struct task_struct *p;
int tty_pgrp = -1;
lock_kernel();
down(&tty_sem);
tty = current->signal->tty;
if (tty) {
tty_pgrp = tty->pgrp;
up(&tty_sem);
if (on_exit && tty->driver->type != TTY_DRIVER_TYPE_PTY)
tty_vhangup(tty);
} else {
if (current->signal->tty_old_pgrp) {
kill_pg(current->signal->tty_old_pgrp, SIGHUP, on_exit);
kill_pg(current->signal->tty_old_pgrp, SIGCONT, on_exit);
}
up(&tty_sem);
unlock_kernel();
return;
}
if (tty_pgrp > 0) {
kill_pg(tty_pgrp, SIGHUP, on_exit);
if (!on_exit)
kill_pg(tty_pgrp, SIGCONT, on_exit);
}
/* Must lock changes to tty_old_pgrp */
down(&tty_sem);
current->signal->tty_old_pgrp = 0;
tty->session = 0;
tty->pgrp = -1;
/* Now clear signal->tty under the lock */
read_lock(&tasklist_lock);
do_each_task_pid(current->signal->session, PIDTYPE_SID, p) {
p->signal->tty = NULL;
} while_each_task_pid(current->signal->session, PIDTYPE_SID, p);
read_unlock(&tasklist_lock);
up(&tty_sem);
unlock_kernel();
}
void stop_tty(struct tty_struct *tty)
{
if (tty->stopped)
return;
tty->stopped = 1;
if (tty->link && tty->link->packet) {
tty->ctrl_status &= ~TIOCPKT_START;
tty->ctrl_status |= TIOCPKT_STOP;
wake_up_interruptible(&tty->link->read_wait);
}
if (tty->driver->stop)
(tty->driver->stop)(tty);
}
EXPORT_SYMBOL(stop_tty);
void start_tty(struct tty_struct *tty)
{
if (!tty->stopped || tty->flow_stopped)
return;
tty->stopped = 0;
if (tty->link && tty->link->packet) {
tty->ctrl_status &= ~TIOCPKT_STOP;
tty->ctrl_status |= TIOCPKT_START;
wake_up_interruptible(&tty->link->read_wait);
}
if (tty->driver->start)
(tty->driver->start)(tty);
/* If we have a running line discipline it may need kicking */
tty_wakeup(tty);
wake_up_interruptible(&tty->write_wait);
}
EXPORT_SYMBOL(start_tty);
static ssize_t tty_read(struct file * file, char __user * buf, size_t count,
loff_t *ppos)
{
int i;
struct tty_struct * tty;
struct inode *inode;
struct tty_ldisc *ld;
tty = (struct tty_struct *)file->private_data;
inode = file->f_dentry->d_inode;
if (tty_paranoia_check(tty, inode, "tty_read"))
return -EIO;
if (!tty || (test_bit(TTY_IO_ERROR, &tty->flags)))
return -EIO;
/* We want to wait for the line discipline to sort out in this
situation */
ld = tty_ldisc_ref_wait(tty);
lock_kernel();
if (ld->read)
i = (ld->read)(tty,file,buf,count);
else
i = -EIO;
tty_ldisc_deref(ld);
unlock_kernel();
if (i > 0)
inode->i_atime = current_fs_time(inode->i_sb);
return i;
}
/*
* Split writes up in sane blocksizes to avoid
* denial-of-service type attacks
*/
static inline ssize_t do_tty_write(
ssize_t (*write)(struct tty_struct *, struct file *, const unsigned char *, size_t),
struct tty_struct *tty,
struct file *file,
const char __user *buf,
size_t count)
{
ssize_t ret = 0, written = 0;
unsigned int chunk;
if (down_interruptible(&tty->atomic_write)) {
return -ERESTARTSYS;
}
/*
* We chunk up writes into a temporary buffer. This
* simplifies low-level drivers immensely, since they
* don't have locking issues and user mode accesses.
*
* But if TTY_NO_WRITE_SPLIT is set, we should use a
* big chunk-size..
*
* The default chunk-size is 2kB, because the NTTY
* layer has problems with bigger chunks. It will
* claim to be able to handle more characters than
* it actually does.
*/
chunk = 2048;
if (test_bit(TTY_NO_WRITE_SPLIT, &tty->flags))
chunk = 65536;
if (count < chunk)
chunk = count;
/* write_buf/write_cnt is protected by the atomic_write semaphore */
if (tty->write_cnt < chunk) {
unsigned char *buf;
if (chunk < 1024)
chunk = 1024;
buf = kmalloc(chunk, GFP_KERNEL);
if (!buf) {
up(&tty->atomic_write);
return -ENOMEM;
}
kfree(tty->write_buf);
tty->write_cnt = chunk;
tty->write_buf = buf;
}
/* Do the write .. */
for (;;) {
size_t size = count;
if (size > chunk)
size = chunk;
ret = -EFAULT;
if (copy_from_user(tty->write_buf, buf, size))
break;
lock_kernel();
ret = write(tty, file, tty->write_buf, size);
unlock_kernel();
if (ret <= 0)
break;
written += ret;
buf += ret;
count -= ret;
if (!count)
break;
ret = -ERESTARTSYS;
if (signal_pending(current))
break;
cond_resched();
}
if (written) {
struct inode *inode = file->f_dentry->d_inode;
inode->i_mtime = current_fs_time(inode->i_sb);
ret = written;
}
up(&tty->atomic_write);
return ret;
}
static ssize_t tty_write(struct file * file, const char __user * buf, size_t count,
loff_t *ppos)
{
struct tty_struct * tty;
struct inode *inode = file->f_dentry->d_inode;
ssize_t ret;
struct tty_ldisc *ld;
tty = (struct tty_struct *)file->private_data;
if (tty_paranoia_check(tty, inode, "tty_write"))
return -EIO;
if (!tty || !tty->driver->write || (test_bit(TTY_IO_ERROR, &tty->flags)))
return -EIO;
ld = tty_ldisc_ref_wait(tty);
if (!ld->write)
ret = -EIO;
else
ret = do_tty_write(ld->write, tty, file, buf, count);
tty_ldisc_deref(ld);
return ret;
}
ssize_t redirected_tty_write(struct file * file, const char __user * buf, size_t count,
loff_t *ppos)
{
struct file *p = NULL;
spin_lock(&redirect_lock);
if (redirect) {
get_file(redirect);
p = redirect;
}
spin_unlock(&redirect_lock);
if (p) {
ssize_t res;
res = vfs_write(p, buf, count, &p->f_pos);
fput(p);
return res;
}
return tty_write(file, buf, count, ppos);
}
static char ptychar[] = "pqrstuvwxyzabcde";
static inline void pty_line_name(struct tty_driver *driver, int index, char *p)
{
int i = index + driver->name_base;
/* ->name is initialized to "ttyp", but "tty" is expected */
sprintf(p, "%s%c%x",
driver->subtype == PTY_TYPE_SLAVE ? "tty" : driver->name,
ptychar[i >> 4 & 0xf], i & 0xf);
}
static inline void tty_line_name(struct tty_driver *driver, int index, char *p)
{
sprintf(p, "%s%d", driver->name, index + driver->name_base);
}
/*
* WSH 06/09/97: Rewritten to remove races and properly clean up after a
* failed open. The new code protects the open with a semaphore, so it's
* really quite straightforward. The semaphore locking can probably be
* relaxed for the (most common) case of reopening a tty.
*/
static int init_dev(struct tty_driver *driver, int idx,
struct tty_struct **ret_tty)
{
struct tty_struct *tty, *o_tty;
struct termios *tp, **tp_loc, *o_tp, **o_tp_loc;
struct termios *ltp, **ltp_loc, *o_ltp, **o_ltp_loc;
int retval=0;
/* check whether we're reopening an existing tty */
if (driver->flags & TTY_DRIVER_DEVPTS_MEM) {
tty = devpts_get_tty(idx);
if (tty && driver->subtype == PTY_TYPE_MASTER)
tty = tty->link;
} else {
tty = driver->ttys[idx];
}
if (tty) goto fast_track;
/*
* First time open is complex, especially for PTY devices.
* This code guarantees that either everything succeeds and the
* TTY is ready for operation, or else the table slots are vacated
* and the allocated memory released. (Except that the termios
* and locked termios may be retained.)
*/
if (!try_module_get(driver->owner)) {
retval = -ENODEV;
goto end_init;
}
o_tty = NULL;
tp = o_tp = NULL;
ltp = o_ltp = NULL;
tty = alloc_tty_struct();
if(!tty)
goto fail_no_mem;
initialize_tty_struct(tty);
tty->driver = driver;
tty->index = idx;
tty_line_name(driver, idx, tty->name);
if (driver->flags & TTY_DRIVER_DEVPTS_MEM) {
tp_loc = &tty->termios;
ltp_loc = &tty->termios_locked;
} else {
tp_loc = &driver->termios[idx];
ltp_loc = &driver->termios_locked[idx];
}
if (!*tp_loc) {
tp = (struct termios *) kmalloc(sizeof(struct termios),
GFP_KERNEL);
if (!tp)
goto free_mem_out;
*tp = driver->init_termios;
}
if (!*ltp_loc) {
ltp = (struct termios *) kmalloc(sizeof(struct termios),
GFP_KERNEL);
if (!ltp)
goto free_mem_out;
memset(ltp, 0, sizeof(struct termios));
}
if (driver->type == TTY_DRIVER_TYPE_PTY) {
o_tty = alloc_tty_struct();
if (!o_tty)
goto free_mem_out;
initialize_tty_struct(o_tty);
o_tty->driver = driver->other;
o_tty->index = idx;
tty_line_name(driver->other, idx, o_tty->name);
if (driver->flags & TTY_DRIVER_DEVPTS_MEM) {
o_tp_loc = &o_tty->termios;
o_ltp_loc = &o_tty->termios_locked;
} else {
o_tp_loc = &driver->other->termios[idx];
o_ltp_loc = &driver->other->termios_locked[idx];
}
if (!*o_tp_loc) {
o_tp = (struct termios *)
kmalloc(sizeof(struct termios), GFP_KERNEL);
if (!o_tp)
goto free_mem_out;
*o_tp = driver->other->init_termios;
}
if (!*o_ltp_loc) {
o_ltp = (struct termios *)
kmalloc(sizeof(struct termios), GFP_KERNEL);
if (!o_ltp)
goto free_mem_out;
memset(o_ltp, 0, sizeof(struct termios));
}
/*
* Everything allocated ... set up the o_tty structure.
*/
if (!(driver->other->flags & TTY_DRIVER_DEVPTS_MEM)) {
driver->other->ttys[idx] = o_tty;
}
if (!*o_tp_loc)
*o_tp_loc = o_tp;
if (!*o_ltp_loc)
*o_ltp_loc = o_ltp;
o_tty->termios = *o_tp_loc;
o_tty->termios_locked = *o_ltp_loc;
driver->other->refcount++;
if (driver->subtype == PTY_TYPE_MASTER)
o_tty->count++;
/* Establish the links in both directions */
tty->link = o_tty;
o_tty->link = tty;
}
/*
* All structures have been allocated, so now we install them.
* Failures after this point use release_mem to clean up, so
* there's no need to null out the local pointers.
*/
if (!(driver->flags & TTY_DRIVER_DEVPTS_MEM)) {
driver->ttys[idx] = tty;
}
if (!*tp_loc)
*tp_loc = tp;
if (!*ltp_loc)
*ltp_loc = ltp;
tty->termios = *tp_loc;
tty->termios_locked = *ltp_loc;
driver->refcount++;
tty->count++;
/*
* Structures all installed ... call the ldisc open routines.
* If we fail here just call release_mem to clean up. No need
* to decrement the use counts, as release_mem doesn't care.
*/
if (tty->ldisc.open) {
retval = (tty->ldisc.open)(tty);
if (retval)
goto release_mem_out;
}
if (o_tty && o_tty->ldisc.open) {
retval = (o_tty->ldisc.open)(o_tty);
if (retval) {
if (tty->ldisc.close)
(tty->ldisc.close)(tty);
goto release_mem_out;
}
tty_ldisc_enable(o_tty);
}
tty_ldisc_enable(tty);
goto success;
/*
* This fast open can be used if the tty is already open.
* No memory is allocated, and the only failures are from
* attempting to open a closing tty or attempting multiple
* opens on a pty master.
*/
fast_track:
if (test_bit(TTY_CLOSING, &tty->flags)) {
retval = -EIO;
goto end_init;
}
if (driver->type == TTY_DRIVER_TYPE_PTY &&
driver->subtype == PTY_TYPE_MASTER) {
/*
* special case for PTY masters: only one open permitted,
* and the slave side open count is incremented as well.
*/
if (tty->count) {
retval = -EIO;
goto end_init;
}
tty->link->count++;
}
tty->count++;
tty->driver = driver; /* N.B. why do this every time?? */
/* FIXME */
if(!test_bit(TTY_LDISC, &tty->flags))
printk(KERN_ERR "init_dev but no ldisc\n");
success:
*ret_tty = tty;
/* All paths come through here to release the semaphore */
end_init:
return retval;
/* Release locally allocated memory ... nothing placed in slots */
free_mem_out:
if (o_tp)
kfree(o_tp);
if (o_tty)
free_tty_struct(o_tty);
if (ltp)
kfree(ltp);
if (tp)
kfree(tp);
free_tty_struct(tty);
fail_no_mem:
module_put(driver->owner);
retval = -ENOMEM;
goto end_init;
/* call the tty release_mem routine to clean out this slot */
release_mem_out:
printk(KERN_INFO "init_dev: ldisc open failed, "
"clearing slot %d\n", idx);
release_mem(tty, idx);
goto end_init;
}
/*
* Releases memory associated with a tty structure, and clears out the
* driver table slots.
*/
static void release_mem(struct tty_struct *tty, int idx)
{
struct tty_struct *o_tty;
struct termios *tp;
int devpts = tty->driver->flags & TTY_DRIVER_DEVPTS_MEM;
if ((o_tty = tty->link) != NULL) {
if (!devpts)
o_tty->driver->ttys[idx] = NULL;
if (o_tty->driver->flags & TTY_DRIVER_RESET_TERMIOS) {
tp = o_tty->termios;
if (!devpts)
o_tty->driver->termios[idx] = NULL;
kfree(tp);
tp = o_tty->termios_locked;
if (!devpts)
o_tty->driver->termios_locked[idx] = NULL;
kfree(tp);
}
o_tty->magic = 0;
o_tty->driver->refcount--;
file_list_lock();
list_del_init(&o_tty->tty_files);
file_list_unlock();
free_tty_struct(o_tty);
}
if (!devpts)
tty->driver->ttys[idx] = NULL;
if (tty->driver->flags & TTY_DRIVER_RESET_TERMIOS) {
tp = tty->termios;
if (!devpts)
tty->driver->termios[idx] = NULL;
kfree(tp);
tp = tty->termios_locked;
if (!devpts)
tty->driver->termios_locked[idx] = NULL;
kfree(tp);
}
tty->magic = 0;
tty->driver->refcount--;
file_list_lock();
list_del_init(&tty->tty_files);
file_list_unlock();
module_put(tty->driver->owner);
free_tty_struct(tty);
}
/*
* Even releasing the tty structures is a tricky business.. We have
* to be very careful that the structures are all released at the
* same time, as interrupts might otherwise get the wrong pointers.
*
* WSH 09/09/97: rewritten to avoid some nasty race conditions that could
* lead to double frees or releasing memory still in use.
*/
static void release_dev(struct file * filp)
{
struct tty_struct *tty, *o_tty;
int pty_master, tty_closing, o_tty_closing, do_sleep;
int devpts_master, devpts;
int idx;
char buf[64];
unsigned long flags;
tty = (struct tty_struct *)filp->private_data;
if (tty_paranoia_check(tty, filp->f_dentry->d_inode, "release_dev"))
return;
check_tty_count(tty, "release_dev");
tty_fasync(-1, filp, 0);
idx = tty->index;
pty_master = (tty->driver->type == TTY_DRIVER_TYPE_PTY &&
tty->driver->subtype == PTY_TYPE_MASTER);
devpts = (tty->driver->flags & TTY_DRIVER_DEVPTS_MEM) != 0;
devpts_master = pty_master && devpts;
o_tty = tty->link;
#ifdef TTY_PARANOIA_CHECK
if (idx < 0 || idx >= tty->driver->num) {
printk(KERN_DEBUG "release_dev: bad idx when trying to "
"free (%s)\n", tty->name);
return;
}
if (!(tty->driver->flags & TTY_DRIVER_DEVPTS_MEM)) {
if (tty != tty->driver->ttys[idx]) {
printk(KERN_DEBUG "release_dev: driver.table[%d] not tty "
"for (%s)\n", idx, tty->name);
return;
}
if (tty->termios != tty->driver->termios[idx]) {
printk(KERN_DEBUG "release_dev: driver.termios[%d] not termios "
"for (%s)\n",
idx, tty->name);
return;
}
if (tty->termios_locked != tty->driver->termios_locked[idx]) {
printk(KERN_DEBUG "release_dev: driver.termios_locked[%d] not "
"termios_locked for (%s)\n",
idx, tty->name);
return;
}
}
#endif
#ifdef TTY_DEBUG_HANGUP
printk(KERN_DEBUG "release_dev of %s (tty count=%d)...",
tty_name(tty, buf), tty->count);
#endif
#ifdef TTY_PARANOIA_CHECK
if (tty->driver->other &&
!(tty->driver->flags & TTY_DRIVER_DEVPTS_MEM)) {
if (o_tty != tty->driver->other->ttys[idx]) {
printk(KERN_DEBUG "release_dev: other->table[%d] "
"not o_tty for (%s)\n",
idx, tty->name);
return;
}
if (o_tty->termios != tty->driver->other->termios[idx]) {
printk(KERN_DEBUG "release_dev: other->termios[%d] "
"not o_termios for (%s)\n",
idx, tty->name);
return;
}
if (o_tty->termios_locked !=
tty->driver->other->termios_locked[idx]) {
printk(KERN_DEBUG "release_dev: other->termios_locked["
"%d] not o_termios_locked for (%s)\n",
idx, tty->name);
return;
}
if (o_tty->link != tty) {
printk(KERN_DEBUG "release_dev: bad pty pointers\n");
return;
}
}
#endif
if (tty->driver->close)
tty->driver->close(tty, filp);
/*
* Sanity check: if tty->count is going to zero, there shouldn't be
* any waiters on tty->read_wait or tty->write_wait. We test the
* wait queues and kick everyone out _before_ actually starting to
* close. This ensures that we won't block while releasing the tty
* structure.
*
* The test for the o_tty closing is necessary, since the master and
* slave sides may close in any order. If the slave side closes out
* first, its count will be one, since the master side holds an open.
* Thus this test wouldn't be triggered at the time the slave closes,
* so we do it now.
*
* Note that it's possible for the tty to be opened again while we're
* flushing out waiters. By recalculating the closing flags before
* each iteration we avoid any problems.
*/
while (1) {
/* Guard against races with tty->count changes elsewhere and
opens on /dev/tty */
down(&tty_sem);
tty_closing = tty->count <= 1;
o_tty_closing = o_tty &&
(o_tty->count <= (pty_master ? 1 : 0));
up(&tty_sem);
do_sleep = 0;
if (tty_closing) {
if (waitqueue_active(&tty->read_wait)) {
wake_up(&tty->read_wait);
do_sleep++;
}
if (waitqueue_active(&tty->write_wait)) {
wake_up(&tty->write_wait);
do_sleep++;
}
}
if (o_tty_closing) {
if (waitqueue_active(&o_tty->read_wait)) {
wake_up(&o_tty->read_wait);
do_sleep++;
}
if (waitqueue_active(&o_tty->write_wait)) {
wake_up(&o_tty->write_wait);
do_sleep++;
}
}
if (!do_sleep)
break;
printk(KERN_WARNING "release_dev: %s: read/write wait queue "
"active!\n", tty_name(tty, buf));
schedule();
}
/*
* The closing flags are now consistent with the open counts on
* both sides, and we've completed the last operation that could
* block, so it's safe to proceed with closing.
*/
down(&tty_sem);
if (pty_master) {
if (--o_tty->count < 0) {
printk(KERN_WARNING "release_dev: bad pty slave count "
"(%d) for %s\n",
o_tty->count, tty_name(o_tty, buf));
o_tty->count = 0;
}
}
if (--tty->count < 0) {
printk(KERN_WARNING "release_dev: bad tty->count (%d) for %s\n",
tty->count, tty_name(tty, buf));
tty->count = 0;
}
up(&tty_sem);
/*
* We've decremented tty->count, so we need to remove this file
* descriptor off the tty->tty_files list; this serves two
* purposes:
* - check_tty_count sees the correct number of file descriptors
* associated with this tty.
* - do_tty_hangup no longer sees this file descriptor as
* something that needs to be handled for hangups.
*/
file_kill(filp);
filp->private_data = NULL;
/*
* Perform some housekeeping before deciding whether to return.
*
* Set the TTY_CLOSING flag if this was the last open. In the
* case of a pty we may have to wait around for the other side
* to close, and TTY_CLOSING makes sure we can't be reopened.
*/
if(tty_closing)
set_bit(TTY_CLOSING, &tty->flags);
if(o_tty_closing)
set_bit(TTY_CLOSING, &o_tty->flags);
/*
* If _either_ side is closing, make sure there aren't any
* processes that still think tty or o_tty is their controlling
* tty.
*/
if (tty_closing || o_tty_closing) {
struct task_struct *p;
read_lock(&tasklist_lock);
do_each_task_pid(tty->session, PIDTYPE_SID, p) {
p->signal->tty = NULL;
} while_each_task_pid(tty->session, PIDTYPE_SID, p);
if (o_tty)
do_each_task_pid(o_tty->session, PIDTYPE_SID, p) {
p->signal->tty = NULL;
} while_each_task_pid(o_tty->session, PIDTYPE_SID, p);
read_unlock(&tasklist_lock);
}
/* check whether both sides are closing ... */
if (!tty_closing || (o_tty && !o_tty_closing))
return;
#ifdef TTY_DEBUG_HANGUP
printk(KERN_DEBUG "freeing tty structure...");
#endif
/*
* Prevent flush_to_ldisc() from rescheduling the work for later. Then
* kill any delayed work. As this is the final close it does not
* race with the set_ldisc code path.
*/
clear_bit(TTY_LDISC, &tty->flags);
clear_bit(TTY_DONT_FLIP, &tty->flags);
cancel_delayed_work(&tty->flip.work);
/*
* Wait for ->hangup_work and ->flip.work handlers to terminate
*/
flush_scheduled_work();
/*
* Wait for any short term users (we know they are just driver
* side waiters as the file is closing so user count on the file
* side is zero.
*/
spin_lock_irqsave(&tty_ldisc_lock, flags);
while(tty->ldisc.refcount)
{
spin_unlock_irqrestore(&tty_ldisc_lock, flags);
wait_event(tty_ldisc_wait, tty->ldisc.refcount == 0);
spin_lock_irqsave(&tty_ldisc_lock, flags);
}
spin_unlock_irqrestore(&tty_ldisc_lock, flags);
/*
* Shutdown the current line discipline, and reset it to N_TTY.
* N.B. why reset ldisc when we're releasing the memory??
*
* FIXME: this MUST get fixed for the new reflocking
*/
if (tty->ldisc.close)
(tty->ldisc.close)(tty);
tty_ldisc_put(tty->ldisc.num);
/*
* Switch the line discipline back
*/
tty_ldisc_assign(tty, tty_ldisc_get(N_TTY));
tty_set_termios_ldisc(tty,N_TTY);
if (o_tty) {
/* FIXME: could o_tty be in setldisc here ? */
clear_bit(TTY_LDISC, &o_tty->flags);
if (o_tty->ldisc.close)
(o_tty->ldisc.close)(o_tty);
tty_ldisc_put(o_tty->ldisc.num);
tty_ldisc_assign(o_tty, tty_ldisc_get(N_TTY));
tty_set_termios_ldisc(o_tty,N_TTY);
}
/*
* The release_mem function takes care of the details of clearing
* the slots and preserving the termios structure.
*/
release_mem(tty, idx);
#ifdef CONFIG_UNIX98_PTYS
/* Make this pty number available for reallocation */
if (devpts) {
down(&allocated_ptys_lock);
idr_remove(&allocated_ptys, idx);
up(&allocated_ptys_lock);
}
#endif
}
/*
* tty_open and tty_release keep up the tty count that contains the
* number of opens done on a tty. We cannot use the inode-count, as
* different inodes might point to the same tty.
*
* Open-counting is needed for pty masters, as well as for keeping
* track of serial lines: DTR is dropped when the last close happens.
* (This is not done solely through tty->count, now. - Ted 1/27/92)
*
* The termios state of a pty is reset on first open so that
* settings don't persist across reuse.
*/
static int tty_open(struct inode * inode, struct file * filp)
{
struct tty_struct *tty;
int noctty, retval;
struct tty_driver *driver;
int index;
dev_t device = inode->i_rdev;
unsigned short saved_flags = filp->f_flags;
nonseekable_open(inode, filp);
retry_open:
noctty = filp->f_flags & O_NOCTTY;
index = -1;
retval = 0;
down(&tty_sem);
if (device == MKDEV(TTYAUX_MAJOR,0)) {
if (!current->signal->tty) {
up(&tty_sem);
return -ENXIO;
}
driver = current->signal->tty->driver;
index = current->signal->tty->index;
filp->f_flags |= O_NONBLOCK; /* Don't let /dev/tty block */
/* noctty = 1; */
goto got_driver;
}
#ifdef CONFIG_VT
if (device == MKDEV(TTY_MAJOR,0)) {
extern struct tty_driver *console_driver;
driver = console_driver;
index = fg_console;
noctty = 1;
goto got_driver;
}
#endif
if (device == MKDEV(TTYAUX_MAJOR,1)) {
driver = console_device(&index);
if (driver) {
/* Don't let /dev/console block */
filp->f_flags |= O_NONBLOCK;
noctty = 1;
goto got_driver;
}
up(&tty_sem);
return -ENODEV;
}
driver = get_tty_driver(device, &index);
if (!driver) {
up(&tty_sem);
return -ENODEV;
}
got_driver:
retval = init_dev(driver, index, &tty);
up(&tty_sem);
if (retval)
return retval;
filp->private_data = tty;
file_move(filp, &tty->tty_files);
check_tty_count(tty, "tty_open");
if (tty->driver->type == TTY_DRIVER_TYPE_PTY &&
tty->driver->subtype == PTY_TYPE_MASTER)
noctty = 1;
#ifdef TTY_DEBUG_HANGUP
printk(KERN_DEBUG "opening %s...", tty->name);
#endif
if (!retval) {
if (tty->driver->open)
retval = tty->driver->open(tty, filp);
else
retval = -ENODEV;
}
filp->f_flags = saved_flags;
if (!retval && test_bit(TTY_EXCLUSIVE, &tty->flags) && !capable(CAP_SYS_ADMIN))
retval = -EBUSY;
if (retval) {
#ifdef TTY_DEBUG_HANGUP
printk(KERN_DEBUG "error %d in opening %s...", retval,
tty->name);
#endif
release_dev(filp);
if (retval != -ERESTARTSYS)
return retval;
if (signal_pending(current))
return retval;
schedule();
/*
* Need to reset f_op in case a hangup happened.
*/
if (filp->f_op == &hung_up_tty_fops)
filp->f_op = &tty_fops;
goto retry_open;
}
if (!noctty &&
current->signal->leader &&
!current->signal->tty &&
tty->session == 0) {
task_lock(current);
current->signal->tty = tty;
task_unlock(current);
current->signal->tty_old_pgrp = 0;
tty->session = current->signal->session;
tty->pgrp = process_group(current);
}
return 0;
}
#ifdef CONFIG_UNIX98_PTYS
static int ptmx_open(struct inode * inode, struct file * filp)
{
struct tty_struct *tty;
int retval;
int index;
int idr_ret;
nonseekable_open(inode, filp);
/* find a device that is not in use. */
down(&allocated_ptys_lock);
if (!idr_pre_get(&allocated_ptys, GFP_KERNEL)) {
up(&allocated_ptys_lock);
return -ENOMEM;
}
idr_ret = idr_get_new(&allocated_ptys, NULL, &index);
if (idr_ret < 0) {
up(&allocated_ptys_lock);
if (idr_ret == -EAGAIN)
return -ENOMEM;
return -EIO;
}
if (index >= pty_limit) {
idr_remove(&allocated_ptys, index);
up(&allocated_ptys_lock);
return -EIO;
}
up(&allocated_ptys_lock);
down(&tty_sem);
retval = init_dev(ptm_driver, index, &tty);
up(&tty_sem);
if (retval)
goto out;
set_bit(TTY_PTY_LOCK, &tty->flags); /* LOCK THE SLAVE */
filp->private_data = tty;
file_move(filp, &tty->tty_files);
retval = -ENOMEM;
if (devpts_pty_new(tty->link))
goto out1;
check_tty_count(tty, "tty_open");
retval = ptm_driver->open(tty, filp);
if (!retval)
return 0;
out1:
release_dev(filp);
out:
down(&allocated_ptys_lock);
idr_remove(&allocated_ptys, index);
up(&allocated_ptys_lock);
return retval;
}
#endif
static int tty_release(struct inode * inode, struct file * filp)
{
lock_kernel();
release_dev(filp);
unlock_kernel();
return 0;
}
/* No kernel lock held - fine */
static unsigned int tty_poll(struct file * filp, poll_table * wait)
{
struct tty_struct * tty;
struct tty_ldisc *ld;
int ret = 0;
tty = (struct tty_struct *)filp->private_data;
if (tty_paranoia_check(tty, filp->f_dentry->d_inode, "tty_poll"))
return 0;
ld = tty_ldisc_ref_wait(tty);
if (ld->poll)
ret = (ld->poll)(tty, filp, wait);
tty_ldisc_deref(ld);
return ret;
}
static int tty_fasync(int fd, struct file * filp, int on)
{
struct tty_struct * tty;
int retval;
tty = (struct tty_struct *)filp->private_data;
if (tty_paranoia_check(tty, filp->f_dentry->d_inode, "tty_fasync"))
return 0;
retval = fasync_helper(fd, filp, on, &tty->fasync);
if (retval <= 0)
return retval;
if (on) {
if (!waitqueue_active(&tty->read_wait))
tty->minimum_to_wake = 1;
retval = f_setown(filp, (-tty->pgrp) ? : current->pid, 0);
if (retval)
return retval;
} else {
if (!tty->fasync && !waitqueue_active(&tty->read_wait))
tty->minimum_to_wake = N_TTY_BUF_SIZE;
}
return 0;
}
static int tiocsti(struct tty_struct *tty, char __user *p)
{
char ch, mbz = 0;
struct tty_ldisc *ld;
if ((current->signal->tty != tty) && !capable(CAP_SYS_ADMIN))
return -EPERM;
if (get_user(ch, p))
return -EFAULT;
ld = tty_ldisc_ref_wait(tty);
ld->receive_buf(tty, &ch, &mbz, 1);
tty_ldisc_deref(ld);
return 0;
}
static int tiocgwinsz(struct tty_struct *tty, struct winsize __user * arg)
{
if (copy_to_user(arg, &tty->winsize, sizeof(*arg)))
return -EFAULT;
return 0;
}
static int tiocswinsz(struct tty_struct *tty, struct tty_struct *real_tty,
struct winsize __user * arg)
{
struct winsize tmp_ws;
if (copy_from_user(&tmp_ws, arg, sizeof(*arg)))
return -EFAULT;
if (!memcmp(&tmp_ws, &tty->winsize, sizeof(*arg)))
return 0;
#ifdef CONFIG_VT
if (tty->driver->type == TTY_DRIVER_TYPE_CONSOLE) {
int rc;
acquire_console_sem();
rc = vc_resize(tty->driver_data, tmp_ws.ws_col, tmp_ws.ws_row);
release_console_sem();
if (rc)
return -ENXIO;
}
#endif
if (tty->pgrp > 0)
kill_pg(tty->pgrp, SIGWINCH, 1);
if ((real_tty->pgrp != tty->pgrp) && (real_tty->pgrp > 0))
kill_pg(real_tty->pgrp, SIGWINCH, 1);
tty->winsize = tmp_ws;
real_tty->winsize = tmp_ws;
return 0;
}
static int tioccons(struct file *file)
{
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
if (file->f_op->write == redirected_tty_write) {
struct file *f;
spin_lock(&redirect_lock);
f = redirect;
redirect = NULL;
spin_unlock(&redirect_lock);
if (f)
fput(f);
return 0;
}
spin_lock(&redirect_lock);
if (redirect) {
spin_unlock(&redirect_lock);
return -EBUSY;
}
get_file(file);
redirect = file;
spin_unlock(&redirect_lock);
return 0;
}
static int fionbio(struct file *file, int __user *p)
{
int nonblock;
if (get_user(nonblock, p))
return -EFAULT;
if (nonblock)
file->f_flags |= O_NONBLOCK;
else
file->f_flags &= ~O_NONBLOCK;
return 0;
}
static int tiocsctty(struct tty_struct *tty, int arg)
{
task_t *p;
if (current->signal->leader &&
(current->signal->session == tty->session))
return 0;
/*
* The process must be a session leader and
* not have a controlling tty already.
*/
if (!current->signal->leader || current->signal->tty)
return -EPERM;
if (tty->session > 0) {
/*
* This tty is already the controlling
* tty for another session group!
*/
if ((arg == 1) && capable(CAP_SYS_ADMIN)) {
/*
* Steal it away
*/
read_lock(&tasklist_lock);
do_each_task_pid(tty->session, PIDTYPE_SID, p) {
p->signal->tty = NULL;
} while_each_task_pid(tty->session, PIDTYPE_SID, p);
read_unlock(&tasklist_lock);
} else
return -EPERM;
}
task_lock(current);
current->signal->tty = tty;
task_unlock(current);
current->signal->tty_old_pgrp = 0;
tty->session = current->signal->session;
tty->pgrp = process_group(current);
return 0;
}
static int tiocgpgrp(struct tty_struct *tty, struct tty_struct *real_tty, pid_t __user *p)
{
/*
* (tty == real_tty) is a cheap way of
* testing if the tty is NOT a master pty.
*/
if (tty == real_tty && current->signal->tty != real_tty)
return -ENOTTY;
return put_user(real_tty->pgrp, p);
}
static int tiocspgrp(struct tty_struct *tty, struct tty_struct *real_tty, pid_t __user *p)
{
pid_t pgrp;
int retval = tty_check_change(real_tty);
if (retval == -EIO)
return -ENOTTY;
if (retval)
return retval;
if (!current->signal->tty ||
(current->signal->tty != real_tty) ||
(real_tty->session != current->signal->session))
return -ENOTTY;
if (get_user(pgrp, p))
return -EFAULT;
if (pgrp < 0)
return -EINVAL;
if (session_of_pgrp(pgrp) != current->signal->session)
return -EPERM;
real_tty->pgrp = pgrp;
return 0;
}
static int tiocgsid(struct tty_struct *tty, struct tty_struct *real_tty, pid_t __user *p)
{
/*
* (tty == real_tty) is a cheap way of
* testing if the tty is NOT a master pty.
*/
if (tty == real_tty && current->signal->tty != real_tty)
return -ENOTTY;
if (real_tty->session <= 0)
return -ENOTTY;
return put_user(real_tty->session, p);
}
static int tiocsetd(struct tty_struct *tty, int __user *p)
{
int ldisc;
if (get_user(ldisc, p))
return -EFAULT;
return tty_set_ldisc(tty, ldisc);
}
static int send_break(struct tty_struct *tty, unsigned int duration)
{
tty->driver->break_ctl(tty, -1);
if (!signal_pending(current)) {
msleep_interruptible(duration);
}
tty->driver->break_ctl(tty, 0);
if (signal_pending(current))
return -EINTR;
return 0;
}
static int
tty_tiocmget(struct tty_struct *tty, struct file *file, int __user *p)
{
int retval = -EINVAL;
if (tty->driver->tiocmget) {
retval = tty->driver->tiocmget(tty, file);
if (retval >= 0)
retval = put_user(retval, p);
}
return retval;
}
static int
tty_tiocmset(struct tty_struct *tty, struct file *file, unsigned int cmd,
unsigned __user *p)
{
int retval = -EINVAL;
if (tty->driver->tiocmset) {
unsigned int set, clear, val;
retval = get_user(val, p);
if (retval)
return retval;
set = clear = 0;
switch (cmd) {
case TIOCMBIS:
set = val;
break;
case TIOCMBIC:
clear = val;
break;
case TIOCMSET:
set = val;
clear = ~val;
break;
}
set &= TIOCM_DTR|TIOCM_RTS|TIOCM_OUT1|TIOCM_OUT2|TIOCM_LOOP;
clear &= TIOCM_DTR|TIOCM_RTS|TIOCM_OUT1|TIOCM_OUT2|TIOCM_LOOP;
retval = tty->driver->tiocmset(tty, file, set, clear);
}
return retval;
}
/*
* Split this up, as gcc can choke on it otherwise..
*/
int tty_ioctl(struct inode * inode, struct file * file,
unsigned int cmd, unsigned long arg)
{
struct tty_struct *tty, *real_tty;
void __user *p = (void __user *)arg;
int retval;
struct tty_ldisc *ld;
tty = (struct tty_struct *)file->private_data;
if (tty_paranoia_check(tty, inode, "tty_ioctl"))
return -EINVAL;
real_tty = tty;
if (tty->driver->type == TTY_DRIVER_TYPE_PTY &&
tty->driver->subtype == PTY_TYPE_MASTER)
real_tty = tty->link;
/*
* Break handling by driver
*/
if (!tty->driver->break_ctl) {
switch(cmd) {
case TIOCSBRK:
case TIOCCBRK:
if (tty->driver->ioctl)
return tty->driver->ioctl(tty, file, cmd, arg);
return -EINVAL;
/* These two ioctl's always return success; even if */
/* the driver doesn't support them. */
case TCSBRK:
case TCSBRKP:
if (!tty->driver->ioctl)
return 0;
retval = tty->driver->ioctl(tty, file, cmd, arg);
if (retval == -ENOIOCTLCMD)
retval = 0;
return retval;
}
}
/*
* Factor out some common prep work
*/
switch (cmd) {
case TIOCSETD:
case TIOCSBRK:
case TIOCCBRK:
case TCSBRK:
case TCSBRKP:
retval = tty_check_change(tty);
if (retval)
return retval;
if (cmd != TIOCCBRK) {
tty_wait_until_sent(tty, 0);
if (signal_pending(current))
return -EINTR;
}
break;
}
switch (cmd) {
case TIOCSTI:
return tiocsti(tty, p);
case TIOCGWINSZ:
return tiocgwinsz(tty, p);
case TIOCSWINSZ:
return tiocswinsz(tty, real_tty, p);
case TIOCCONS:
return real_tty!=tty ? -EINVAL : tioccons(file);
case FIONBIO:
return fionbio(file, p);
case TIOCEXCL:
set_bit(TTY_EXCLUSIVE, &tty->flags);
return 0;
case TIOCNXCL:
clear_bit(TTY_EXCLUSIVE, &tty->flags);
return 0;
case TIOCNOTTY:
if (current->signal->tty != tty)
return -ENOTTY;
if (current->signal->leader)
disassociate_ctty(0);
task_lock(current);
current->signal->tty = NULL;
task_unlock(current);
return 0;
case TIOCSCTTY:
return tiocsctty(tty, arg);
case TIOCGPGRP:
return tiocgpgrp(tty, real_tty, p);
case TIOCSPGRP:
return tiocspgrp(tty, real_tty, p);
case TIOCGSID:
return tiocgsid(tty, real_tty, p);
case TIOCGETD:
/* FIXME: check this is ok */
return put_user(tty->ldisc.num, (int __user *)p);
case TIOCSETD:
return tiocsetd(tty, p);
#ifdef CONFIG_VT
case TIOCLINUX:
return tioclinux(tty, arg);
#endif
/*
* Break handling
*/
case TIOCSBRK: /* Turn break on, unconditionally */
tty->driver->break_ctl(tty, -1);
return 0;
case TIOCCBRK: /* Turn break off, unconditionally */
tty->driver->break_ctl(tty, 0);
return 0;
case TCSBRK: /* SVID version: non-zero arg --> no break */
/*
* XXX is the above comment correct, or the
* code below correct? Is this ioctl used at
* all by anyone?
*/
if (!arg)
return send_break(tty, 250);
return 0;
case TCSBRKP: /* support for POSIX tcsendbreak() */
return send_break(tty, arg ? arg*100 : 250);
case TIOCMGET:
return tty_tiocmget(tty, file, p);
case TIOCMSET:
case TIOCMBIC:
case TIOCMBIS:
return tty_tiocmset(tty, file, cmd, p);
}
if (tty->driver->ioctl) {
retval = (tty->driver->ioctl)(tty, file, cmd, arg);
if (retval != -ENOIOCTLCMD)
return retval;
}
ld = tty_ldisc_ref_wait(tty);
retval = -EINVAL;
if (ld->ioctl) {
retval = ld->ioctl(tty, file, cmd, arg);
if (retval == -ENOIOCTLCMD)
retval = -EINVAL;
}
tty_ldisc_deref(ld);
return retval;
}
/*
* This implements the "Secure Attention Key" --- the idea is to
* prevent trojan horses by killing all processes associated with this
* tty when the user hits the "Secure Attention Key". Required for
* super-paranoid applications --- see the Orange Book for more details.
*
* This code could be nicer; ideally it should send a HUP, wait a few
* seconds, then send a INT, and then a KILL signal. But you then
* have to coordinate with the init process, since all processes associated
* with the current tty must be dead before the new getty is allowed
* to spawn.
*
* Now, if it would be correct ;-/ The current code has a nasty hole -
* it doesn't catch files in flight. We may send the descriptor to ourselves
* via AF_UNIX socket, close it and later fetch from socket. FIXME.
*
* Nasty bug: do_SAK is being called in interrupt context. This can
* deadlock. We punt it up to process context. AKPM - 16Mar2001
*/
static void __do_SAK(void *arg)
{
#ifdef TTY_SOFT_SAK
tty_hangup(tty);
#else
struct tty_struct *tty = arg;
struct task_struct *p;
int session;
int i;
struct file *filp;
struct tty_ldisc *disc;
if (!tty)
return;
session = tty->session;
/* We don't want an ldisc switch during this */
disc = tty_ldisc_ref(tty);
if (disc && disc->flush_buffer)
disc->flush_buffer(tty);
tty_ldisc_deref(disc);
if (tty->driver->flush_buffer)
tty->driver->flush_buffer(tty);
read_lock(&tasklist_lock);
do_each_task_pid(session, PIDTYPE_SID, p) {
if (p->signal->tty == tty || session > 0) {
printk(KERN_NOTICE "SAK: killed process %d"
" (%s): p->signal->session==tty->session\n",
p->pid, p->comm);
send_sig(SIGKILL, p, 1);
continue;
}
task_lock(p);
if (p->files) {
spin_lock(&p->files->file_lock);
for (i=0; i < p->files->max_fds; i++) {
filp = fcheck_files(p->files, i);
if (!filp)
continue;
if (filp->f_op->read == tty_read &&
filp->private_data == tty) {
printk(KERN_NOTICE "SAK: killed process %d"
" (%s): fd#%d opened to the tty\n",
p->pid, p->comm, i);
send_sig(SIGKILL, p, 1);
break;
}
}
spin_unlock(&p->files->file_lock);
}
task_unlock(p);
} while_each_task_pid(session, PIDTYPE_SID, p);
read_unlock(&tasklist_lock);
#endif
}
/*
* The tq handling here is a little racy - tty->SAK_work may already be queued.
* Fortunately we don't need to worry, because if ->SAK_work is already queued,
* the values which we write to it will be identical to the values which it
* already has. --akpm
*/
void do_SAK(struct tty_struct *tty)
{
if (!tty)
return;
PREPARE_WORK(&tty->SAK_work, __do_SAK, tty);
schedule_work(&tty->SAK_work);
}
EXPORT_SYMBOL(do_SAK);
/*
* This routine is called out of the software interrupt to flush data
* from the flip buffer to the line discipline.
*/
static void flush_to_ldisc(void *private_)
{
struct tty_struct *tty = (struct tty_struct *) private_;
unsigned char *cp;
char *fp;
int count;
unsigned long flags;
struct tty_ldisc *disc;
disc = tty_ldisc_ref(tty);
if (disc == NULL) /* !TTY_LDISC */
return;
if (test_bit(TTY_DONT_FLIP, &tty->flags)) {
/*
* Do it after the next timer tick:
*/
schedule_delayed_work(&tty->flip.work, 1);
goto out;
}
spin_lock_irqsave(&tty->read_lock, flags);
if (tty->flip.buf_num) {
cp = tty->flip.char_buf + TTY_FLIPBUF_SIZE;
fp = tty->flip.flag_buf + TTY_FLIPBUF_SIZE;
tty->flip.buf_num = 0;
tty->flip.char_buf_ptr = tty->flip.char_buf;
tty->flip.flag_buf_ptr = tty->flip.flag_buf;
} else {
cp = tty->flip.char_buf;
fp = tty->flip.flag_buf;
tty->flip.buf_num = 1;
tty->flip.char_buf_ptr = tty->flip.char_buf + TTY_FLIPBUF_SIZE;
tty->flip.flag_buf_ptr = tty->flip.flag_buf + TTY_FLIPBUF_SIZE;
}
count = tty->flip.count;
tty->flip.count = 0;
spin_unlock_irqrestore(&tty->read_lock, flags);
disc->receive_buf(tty, cp, fp, count);
out:
tty_ldisc_deref(disc);
}
/*
* Routine which returns the baud rate of the tty
*
* Note that the baud_table needs to be kept in sync with the
* include/asm/termbits.h file.
*/
static int baud_table[] = {
0, 50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800, 2400, 4800,
9600, 19200, 38400, 57600, 115200, 230400, 460800,
#ifdef __sparc__
76800, 153600, 307200, 614400, 921600
#else
500000, 576000, 921600, 1000000, 1152000, 1500000, 2000000,
2500000, 3000000, 3500000, 4000000
#endif
};
static int n_baud_table = ARRAY_SIZE(baud_table);
/**
* tty_termios_baud_rate
* @termios: termios structure
*
* Convert termios baud rate data into a speed. This should be called
* with the termios lock held if this termios is a terminal termios
* structure. May change the termios data.
*/
int tty_termios_baud_rate(struct termios *termios)
{
unsigned int cbaud;
cbaud = termios->c_cflag & CBAUD;
if (cbaud & CBAUDEX) {
cbaud &= ~CBAUDEX;
if (cbaud < 1 || cbaud + 15 > n_baud_table)
termios->c_cflag &= ~CBAUDEX;
else
cbaud += 15;
}
return baud_table[cbaud];
}
EXPORT_SYMBOL(tty_termios_baud_rate);
/**
* tty_get_baud_rate - get tty bit rates
* @tty: tty to query
*
* Returns the baud rate as an integer for this terminal. The
* termios lock must be held by the caller and the terminal bit
* flags may be updated.
*/
int tty_get_baud_rate(struct tty_struct *tty)
{
int baud = tty_termios_baud_rate(tty->termios);
if (baud == 38400 && tty->alt_speed) {
if (!tty->warned) {
printk(KERN_WARNING "Use of setserial/setrocket to "
"set SPD_* flags is deprecated\n");
tty->warned = 1;
}
baud = tty->alt_speed;
}
return baud;
}
EXPORT_SYMBOL(tty_get_baud_rate);
/**
* tty_flip_buffer_push - terminal
* @tty: tty to push
*
* Queue a push of the terminal flip buffers to the line discipline. This
* function must not be called from IRQ context if tty->low_latency is set.
*
* In the event of the queue being busy for flipping the work will be
* held off and retried later.
*/
void tty_flip_buffer_push(struct tty_struct *tty)
{
if (tty->low_latency)
flush_to_ldisc((void *) tty);
else
schedule_delayed_work(&tty->flip.work, 1);
}
EXPORT_SYMBOL(tty_flip_buffer_push);
/*
* This subroutine initializes a tty structure.
*/
static void initialize_tty_struct(struct tty_struct *tty)
{
memset(tty, 0, sizeof(struct tty_struct));
tty->magic = TTY_MAGIC;
tty_ldisc_assign(tty, tty_ldisc_get(N_TTY));
tty->pgrp = -1;
tty->overrun_time = jiffies;
tty->flip.char_buf_ptr = tty->flip.char_buf;
tty->flip.flag_buf_ptr = tty->flip.flag_buf;
INIT_WORK(&tty->flip.work, flush_to_ldisc, tty);
init_MUTEX(&tty->flip.pty_sem);
init_MUTEX(&tty->termios_sem);
init_waitqueue_head(&tty->write_wait);
init_waitqueue_head(&tty->read_wait);
INIT_WORK(&tty->hangup_work, do_tty_hangup, tty);
sema_init(&tty->atomic_read, 1);
sema_init(&tty->atomic_write, 1);
spin_lock_init(&tty->read_lock);
INIT_LIST_HEAD(&tty->tty_files);
INIT_WORK(&tty->SAK_work, NULL, NULL);
}
/*
* The default put_char routine if the driver did not define one.
*/
static void tty_default_put_char(struct tty_struct *tty, unsigned char ch)
{
tty->driver->write(tty, &ch, 1);
}
static struct class *tty_class;
/**
* tty_register_device - register a tty device
* @driver: the tty driver that describes the tty device
* @index: the index in the tty driver for this tty device
* @device: a struct device that is associated with this tty device.
* This field is optional, if there is no known struct device for this
* tty device it can be set to NULL safely.
*
* This call is required to be made to register an individual tty device if
* the tty driver's flags have the TTY_DRIVER_NO_DEVFS bit set. If that
* bit is not set, this function should not be called.
*/
void tty_register_device(struct tty_driver *driver, unsigned index,
struct device *device)
{
char name[64];
dev_t dev = MKDEV(driver->major, driver->minor_start) + index;
if (index >= driver->num) {
printk(KERN_ERR "Attempt to register invalid tty line number "
" (%d).\n", index);
return;
}
devfs_mk_cdev(dev, S_IFCHR | S_IRUSR | S_IWUSR,
"%s%d", driver->devfs_name, index + driver->name_base);
if (driver->type == TTY_DRIVER_TYPE_PTY)
pty_line_name(driver, index, name);
else
tty_line_name(driver, index, name);
class_device_create(tty_class, dev, device, name);
}
/**
* tty_unregister_device - unregister a tty device
* @driver: the tty driver that describes the tty device
* @index: the index in the tty driver for this tty device
*
* If a tty device is registered with a call to tty_register_device() then
* this function must be made when the tty device is gone.
*/
void tty_unregister_device(struct tty_driver *driver, unsigned index)
{
devfs_remove("%s%d", driver->devfs_name, index + driver->name_base);
class_device_destroy(tty_class, MKDEV(driver->major, driver->minor_start) + index);
}
EXPORT_SYMBOL(tty_register_device);
EXPORT_SYMBOL(tty_unregister_device);
struct tty_driver *alloc_tty_driver(int lines)
{
struct tty_driver *driver;
driver = kmalloc(sizeof(struct tty_driver), GFP_KERNEL);
if (driver) {
memset(driver, 0, sizeof(struct tty_driver));
driver->magic = TTY_DRIVER_MAGIC;
driver->num = lines;
/* later we'll move allocation of tables here */
}
return driver;
}
void put_tty_driver(struct tty_driver *driver)
{
kfree(driver);
}
void tty_set_operations(struct tty_driver *driver, struct tty_operations *op)
{
driver->open = op->open;
driver->close = op->close;
driver->write = op->write;
driver->put_char = op->put_char;
driver->flush_chars = op->flush_chars;
driver->write_room = op->write_room;
driver->chars_in_buffer = op->chars_in_buffer;
driver->ioctl = op->ioctl;
driver->set_termios = op->set_termios;
driver->throttle = op->throttle;
driver->unthrottle = op->unthrottle;
driver->stop = op->stop;
driver->start = op->start;
driver->hangup = op->hangup;
driver->break_ctl = op->break_ctl;
driver->flush_buffer = op->flush_buffer;
driver->set_ldisc = op->set_ldisc;
driver->wait_until_sent = op->wait_until_sent;
driver->send_xchar = op->send_xchar;
driver->read_proc = op->read_proc;
driver->write_proc = op->write_proc;
driver->tiocmget = op->tiocmget;
driver->tiocmset = op->tiocmset;
}
EXPORT_SYMBOL(alloc_tty_driver);
EXPORT_SYMBOL(put_tty_driver);
EXPORT_SYMBOL(tty_set_operations);
/*
* Called by a tty driver to register itself.
*/
int tty_register_driver(struct tty_driver *driver)
{
int error;
int i;
dev_t dev;
void **p = NULL;
if (driver->flags & TTY_DRIVER_INSTALLED)
return 0;
if (!(driver->flags & TTY_DRIVER_DEVPTS_MEM)) {
p = kmalloc(driver->num * 3 * sizeof(void *), GFP_KERNEL);
if (!p)
return -ENOMEM;
memset(p, 0, driver->num * 3 * sizeof(void *));
}
if (!driver->major) {
error = alloc_chrdev_region(&dev, driver->minor_start, driver->num,
(char*)driver->name);
if (!error) {
driver->major = MAJOR(dev);
driver->minor_start = MINOR(dev);
}
} else {
dev = MKDEV(driver->major, driver->minor_start);
error = register_chrdev_region(dev, driver->num,
(char*)driver->name);
}
if (error < 0) {
kfree(p);
return error;
}
if (p) {
driver->ttys = (struct tty_struct **)p;
driver->termios = (struct termios **)(p + driver->num);
driver->termios_locked = (struct termios **)(p + driver->num * 2);
} else {
driver->ttys = NULL;
driver->termios = NULL;
driver->termios_locked = NULL;
}
cdev_init(&driver->cdev, &tty_fops);
driver->cdev.owner = driver->owner;
error = cdev_add(&driver->cdev, dev, driver->num);
if (error) {
cdev_del(&driver->cdev);
unregister_chrdev_region(dev, driver->num);
driver->ttys = NULL;
driver->termios = driver->termios_locked = NULL;
kfree(p);
return error;
}
if (!driver->put_char)
driver->put_char = tty_default_put_char;
list_add(&driver->tty_drivers, &tty_drivers);
if ( !(driver->flags & TTY_DRIVER_NO_DEVFS) ) {
for(i = 0; i < driver->num; i++)
tty_register_device(driver, i, NULL);
}
proc_tty_register_driver(driver);
return 0;
}
EXPORT_SYMBOL(tty_register_driver);
/*
* Called by a tty driver to unregister itself.
*/
int tty_unregister_driver(struct tty_driver *driver)
{
int i;
struct termios *tp;
void *p;
if (driver->refcount)
return -EBUSY;
unregister_chrdev_region(MKDEV(driver->major, driver->minor_start),
driver->num);
list_del(&driver->tty_drivers);
/*
* Free the termios and termios_locked structures because
* we don't want to get memory leaks when modular tty
* drivers are removed from the kernel.
*/
for (i = 0; i < driver->num; i++) {
tp = driver->termios[i];
if (tp) {
driver->termios[i] = NULL;
kfree(tp);
}
tp = driver->termios_locked[i];
if (tp) {
driver->termios_locked[i] = NULL;
kfree(tp);
}
if (!(driver->flags & TTY_DRIVER_NO_DEVFS))
tty_unregister_device(driver, i);
}
p = driver->ttys;
proc_tty_unregister_driver(driver);
driver->ttys = NULL;
driver->termios = driver->termios_locked = NULL;
kfree(p);
cdev_del(&driver->cdev);
return 0;
}
EXPORT_SYMBOL(tty_unregister_driver);
/*
* Initialize the console device. This is called *early*, so
* we can't necessarily depend on lots of kernel help here.
* Just do some early initializations, and do the complex setup
* later.
*/
void __init console_init(void)
{
initcall_t *call;
/* Setup the default TTY line discipline. */
(void) tty_register_ldisc(N_TTY, &tty_ldisc_N_TTY);
/*
* set up the console device so that later boot sequences can
* inform about problems etc..
*/
#ifdef CONFIG_EARLY_PRINTK
disable_early_printk();
#endif
#ifdef CONFIG_SERIAL_68360
/* This is not a console initcall. I know not what it's doing here.
So I haven't moved it. dwmw2 */
rs_360_init();
#endif
call = __con_initcall_start;
while (call < __con_initcall_end) {
(*call)();
call++;
}
}
#ifdef CONFIG_VT
extern int vty_init(void);
#endif
static int __init tty_class_init(void)
{
tty_class = class_create(THIS_MODULE, "tty");
if (IS_ERR(tty_class))
return PTR_ERR(tty_class);
return 0;
}
postcore_initcall(tty_class_init);
/* 3/2004 jmc: why do these devices exist? */
static struct cdev tty_cdev, console_cdev;
#ifdef CONFIG_UNIX98_PTYS
static struct cdev ptmx_cdev;
#endif
#ifdef CONFIG_VT
static struct cdev vc0_cdev;
#endif
/*
* Ok, now we can initialize the rest of the tty devices and can count
* on memory allocations, interrupts etc..
*/
static int __init tty_init(void)
{
cdev_init(&tty_cdev, &tty_fops);
if (cdev_add(&tty_cdev, MKDEV(TTYAUX_MAJOR, 0), 1) ||
register_chrdev_region(MKDEV(TTYAUX_MAJOR, 0), 1, "/dev/tty") < 0)
panic("Couldn't register /dev/tty driver\n");
devfs_mk_cdev(MKDEV(TTYAUX_MAJOR, 0), S_IFCHR|S_IRUGO|S_IWUGO, "tty");
class_device_create(tty_class, MKDEV(TTYAUX_MAJOR, 0), NULL, "tty");
cdev_init(&console_cdev, &console_fops);
if (cdev_add(&console_cdev, MKDEV(TTYAUX_MAJOR, 1), 1) ||
register_chrdev_region(MKDEV(TTYAUX_MAJOR, 1), 1, "/dev/console") < 0)
panic("Couldn't register /dev/console driver\n");
devfs_mk_cdev(MKDEV(TTYAUX_MAJOR, 1), S_IFCHR|S_IRUSR|S_IWUSR, "console");
class_device_create(tty_class, MKDEV(TTYAUX_MAJOR, 1), NULL, "console");
#ifdef CONFIG_UNIX98_PTYS
cdev_init(&ptmx_cdev, &ptmx_fops);
if (cdev_add(&ptmx_cdev, MKDEV(TTYAUX_MAJOR, 2), 1) ||
register_chrdev_region(MKDEV(TTYAUX_MAJOR, 2), 1, "/dev/ptmx") < 0)
panic("Couldn't register /dev/ptmx driver\n");
devfs_mk_cdev(MKDEV(TTYAUX_MAJOR, 2), S_IFCHR|S_IRUGO|S_IWUGO, "ptmx");
class_device_create(tty_class, MKDEV(TTYAUX_MAJOR, 2), NULL, "ptmx");
#endif
#ifdef CONFIG_VT
cdev_init(&vc0_cdev, &console_fops);
if (cdev_add(&vc0_cdev, MKDEV(TTY_MAJOR, 0), 1) ||
register_chrdev_region(MKDEV(TTY_MAJOR, 0), 1, "/dev/vc/0") < 0)
panic("Couldn't register /dev/tty0 driver\n");
devfs_mk_cdev(MKDEV(TTY_MAJOR, 0), S_IFCHR|S_IRUSR|S_IWUSR, "vc/0");
class_device_create(tty_class, MKDEV(TTY_MAJOR, 0), NULL, "tty0");
vty_init();
#endif
return 0;
}
module_init(tty_init);
Reference in New Issue View Git Blame Copy Permalink