mirror of
https://github.com/torvalds/linux.git
synced 2024-11-25 13:41:51 +00:00
384461abca
Instead of requiring each driver to care for assigning the owner member
of struct pwm_ops, handle that implicitly using a macro. Note that the
owner member has to be moved to struct pwm_chip, as the ops structure
usually lives in read-only memory and so cannot be modified.
The upside is that new low level drivers cannot forget the assignment and
save one line each. The pwm-crc driver didn't assign .owner, that's not
a problem in practice though as the driver cannot be compiled as a
module.
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com> # Intel LPSS
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> # pwm-{bcm,brcm}*.c
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> # sun4i
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Acked-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> # pwm-visconti
Acked-by: Heiko Stuebner <heiko@sntech.de> # pwm-rockchip
Acked-by: Michael Walle <michael@walle.cc> # pwm-sl28cpld
Acked-by: Neil Armstrong <neil.armstrong@linaro.org> # pwm-meson
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230804142707.412137-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
228 lines
6.8 KiB
C
228 lines
6.8 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Copyright (C) ST-Ericsson SA 2010
|
|
*
|
|
* Author: Arun R Murthy <arun.murthy@stericsson.com>
|
|
* Datasheet: https://web.archive.org/web/20130614115108/http://www.stericsson.com/developers/CD00291561_UM1031_AB8500_user_manual-rev5_CTDS_public.pdf
|
|
*/
|
|
#include <linux/err.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/pwm.h>
|
|
#include <linux/mfd/abx500.h>
|
|
#include <linux/mfd/abx500/ab8500.h>
|
|
#include <linux/module.h>
|
|
|
|
/*
|
|
* PWM Out generators
|
|
* Bank: 0x10
|
|
*/
|
|
#define AB8500_PWM_OUT_CTRL1_REG 0x60
|
|
#define AB8500_PWM_OUT_CTRL2_REG 0x61
|
|
#define AB8500_PWM_OUT_CTRL7_REG 0x66
|
|
|
|
#define AB8500_PWM_CLKRATE 9600000
|
|
|
|
struct ab8500_pwm_chip {
|
|
struct pwm_chip chip;
|
|
unsigned int hwid;
|
|
};
|
|
|
|
static struct ab8500_pwm_chip *ab8500_pwm_from_chip(struct pwm_chip *chip)
|
|
{
|
|
return container_of(chip, struct ab8500_pwm_chip, chip);
|
|
}
|
|
|
|
static int ab8500_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
|
|
const struct pwm_state *state)
|
|
{
|
|
int ret;
|
|
u8 reg;
|
|
u8 higher_val, lower_val;
|
|
unsigned int duty_steps, div;
|
|
struct ab8500_pwm_chip *ab8500 = ab8500_pwm_from_chip(chip);
|
|
|
|
if (state->polarity != PWM_POLARITY_NORMAL)
|
|
return -EINVAL;
|
|
|
|
if (state->enabled) {
|
|
/*
|
|
* A time quantum is
|
|
* q = (32 - FreqPWMOutx[3:0]) / AB8500_PWM_CLKRATE
|
|
* The period is always 1024 q, duty_cycle is between 1q and 1024q.
|
|
*
|
|
* FreqPWMOutx[3:0] | output frequency | output frequency | 1024q = period
|
|
* | (from manual) | (1 / 1024q) | = 1 / freq
|
|
* -----------------+------------------+------------------+--------------
|
|
* b0000 | 293 Hz | 292.968750 Hz | 3413333.33 ns
|
|
* b0001 | 302 Hz | 302.419355 Hz | 3306666.66 ns
|
|
* b0010 | 312 Hz | 312.500000 Hz | 3200000 ns
|
|
* b0011 | 323 Hz | 323.275862 Hz | 3093333.33 ns
|
|
* b0100 | 334 Hz | 334.821429 Hz | 2986666.66 ns
|
|
* b0101 | 347 Hz | 347.222222 Hz | 2880000 ns
|
|
* b0110 | 360 Hz | 360.576923 Hz | 2773333.33 ns
|
|
* b0111 | 375 Hz | 375.000000 Hz | 2666666.66 ns
|
|
* b1000 | 390 Hz | 390.625000 Hz | 2560000 ns
|
|
* b1001 | 407 Hz | 407.608696 Hz | 2453333.33 ns
|
|
* b1010 | 426 Hz | 426.136364 Hz | 2346666.66 ns
|
|
* b1011 | 446 Hz | 446.428571 Hz | 2240000 ns
|
|
* b1100 | 468 Hz | 468.750000 Hz | 2133333.33 ns
|
|
* b1101 | 493 Hz | 493.421053 Hz | 2026666.66 ns
|
|
* b1110 | 520 Hz | 520.833333 Hz | 1920000 ns
|
|
* b1111 | 551 Hz | 551.470588 Hz | 1813333.33 ns
|
|
*
|
|
*
|
|
* AB8500_PWM_CLKRATE is a multiple of 1024, so the division by
|
|
* 1024 can be done in this factor without loss of precision.
|
|
*/
|
|
div = min_t(u64, mul_u64_u64_div_u64(state->period,
|
|
AB8500_PWM_CLKRATE >> 10,
|
|
NSEC_PER_SEC), 32); /* 32 - FreqPWMOutx[3:0] */
|
|
if (div <= 16)
|
|
/* requested period < 3413333.33 */
|
|
return -EINVAL;
|
|
|
|
duty_steps = max_t(u64, mul_u64_u64_div_u64(state->duty_cycle,
|
|
AB8500_PWM_CLKRATE,
|
|
(u64)NSEC_PER_SEC * div), 1024);
|
|
}
|
|
|
|
/*
|
|
* The hardware doesn't support duty_steps = 0 explicitly, but emits low
|
|
* when disabled.
|
|
*/
|
|
if (!state->enabled || duty_steps == 0) {
|
|
ret = abx500_mask_and_set_register_interruptible(chip->dev,
|
|
AB8500_MISC, AB8500_PWM_OUT_CTRL7_REG,
|
|
1 << ab8500->hwid, 0);
|
|
|
|
if (ret < 0)
|
|
dev_err(chip->dev, "%s: Failed to disable PWM, Error %d\n",
|
|
pwm->label, ret);
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* The lower 8 bits of duty_steps is written to ...
|
|
* AB8500_PWM_OUT_CTRL1_REG[0:7]
|
|
*/
|
|
lower_val = (duty_steps - 1) & 0x00ff;
|
|
/*
|
|
* The two remaining high bits to
|
|
* AB8500_PWM_OUT_CTRL2_REG[0:1]; together with FreqPWMOutx.
|
|
*/
|
|
higher_val = ((duty_steps - 1) & 0x0300) >> 8 | (32 - div) << 4;
|
|
|
|
reg = AB8500_PWM_OUT_CTRL1_REG + (ab8500->hwid * 2);
|
|
|
|
ret = abx500_set_register_interruptible(chip->dev, AB8500_MISC,
|
|
reg, lower_val);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = abx500_set_register_interruptible(chip->dev, AB8500_MISC,
|
|
(reg + 1), higher_val);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* enable */
|
|
ret = abx500_mask_and_set_register_interruptible(chip->dev,
|
|
AB8500_MISC, AB8500_PWM_OUT_CTRL7_REG,
|
|
1 << ab8500->hwid, 1 << ab8500->hwid);
|
|
if (ret < 0)
|
|
dev_err(chip->dev, "%s: Failed to enable PWM, Error %d\n",
|
|
pwm->label, ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int ab8500_pwm_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
|
|
struct pwm_state *state)
|
|
{
|
|
u8 ctrl7, lower_val, higher_val;
|
|
int ret;
|
|
struct ab8500_pwm_chip *ab8500 = ab8500_pwm_from_chip(chip);
|
|
unsigned int div, duty_steps;
|
|
|
|
ret = abx500_get_register_interruptible(chip->dev, AB8500_MISC,
|
|
AB8500_PWM_OUT_CTRL7_REG,
|
|
&ctrl7);
|
|
if (ret)
|
|
return ret;
|
|
|
|
state->polarity = PWM_POLARITY_NORMAL;
|
|
|
|
if (!(ctrl7 & 1 << ab8500->hwid)) {
|
|
state->enabled = false;
|
|
return 0;
|
|
}
|
|
|
|
ret = abx500_get_register_interruptible(chip->dev, AB8500_MISC,
|
|
AB8500_PWM_OUT_CTRL1_REG + (ab8500->hwid * 2),
|
|
&lower_val);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = abx500_get_register_interruptible(chip->dev, AB8500_MISC,
|
|
AB8500_PWM_OUT_CTRL2_REG + (ab8500->hwid * 2),
|
|
&higher_val);
|
|
if (ret)
|
|
return ret;
|
|
|
|
div = 32 - ((higher_val & 0xf0) >> 4);
|
|
duty_steps = ((higher_val & 3) << 8 | lower_val) + 1;
|
|
|
|
state->period = DIV64_U64_ROUND_UP((u64)div << 10, AB8500_PWM_CLKRATE);
|
|
state->duty_cycle = DIV64_U64_ROUND_UP((u64)div * duty_steps, AB8500_PWM_CLKRATE);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct pwm_ops ab8500_pwm_ops = {
|
|
.apply = ab8500_pwm_apply,
|
|
.get_state = ab8500_pwm_get_state,
|
|
};
|
|
|
|
static int ab8500_pwm_probe(struct platform_device *pdev)
|
|
{
|
|
struct ab8500_pwm_chip *ab8500;
|
|
int err;
|
|
|
|
if (pdev->id < 1 || pdev->id > 31)
|
|
return dev_err_probe(&pdev->dev, -EINVAL, "Invalid device id %d\n", pdev->id);
|
|
|
|
/*
|
|
* Nothing to be done in probe, this is required to get the
|
|
* device which is required for ab8500 read and write
|
|
*/
|
|
ab8500 = devm_kzalloc(&pdev->dev, sizeof(*ab8500), GFP_KERNEL);
|
|
if (ab8500 == NULL)
|
|
return -ENOMEM;
|
|
|
|
ab8500->chip.dev = &pdev->dev;
|
|
ab8500->chip.ops = &ab8500_pwm_ops;
|
|
ab8500->chip.npwm = 1;
|
|
ab8500->hwid = pdev->id - 1;
|
|
|
|
err = devm_pwmchip_add(&pdev->dev, &ab8500->chip);
|
|
if (err < 0)
|
|
return dev_err_probe(&pdev->dev, err, "Failed to add pwm chip\n");
|
|
|
|
dev_dbg(&pdev->dev, "pwm probe successful\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver ab8500_pwm_driver = {
|
|
.driver = {
|
|
.name = "ab8500-pwm",
|
|
},
|
|
.probe = ab8500_pwm_probe,
|
|
};
|
|
module_platform_driver(ab8500_pwm_driver);
|
|
|
|
MODULE_AUTHOR("Arun MURTHY <arun.murthy@stericsson.com>");
|
|
MODULE_DESCRIPTION("AB8500 Pulse Width Modulation Driver");
|
|
MODULE_ALIAS("platform:ab8500-pwm");
|
|
MODULE_LICENSE("GPL v2");
|