mirror of
https://github.com/torvalds/linux.git
synced 2024-11-24 05:02:12 +00:00
215cedec37
1) This is not allowed by the kernel coding style 2) Just configure your editor correctly 3) It's really ugly Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
1151 lines
29 KiB
C
1151 lines
29 KiB
C
/*
|
|
* i2c tv tuner chip device driver
|
|
* controls all those simple 4-control-bytes style tuners.
|
|
*
|
|
* This "tuner-simple" module was split apart from the original "tuner" module.
|
|
*/
|
|
#include <linux/delay.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/videodev2.h>
|
|
#include <media/tuner.h>
|
|
#include <media/v4l2-common.h>
|
|
#include <media/tuner-types.h>
|
|
#include "tuner-i2c.h"
|
|
#include "tuner-simple.h"
|
|
|
|
static int debug;
|
|
module_param(debug, int, 0644);
|
|
MODULE_PARM_DESC(debug, "enable verbose debug messages");
|
|
|
|
#define TUNER_SIMPLE_MAX 64
|
|
static unsigned int simple_devcount;
|
|
|
|
static int offset;
|
|
module_param(offset, int, 0664);
|
|
MODULE_PARM_DESC(offset, "Allows to specify an offset for tuner");
|
|
|
|
static unsigned int atv_input[TUNER_SIMPLE_MAX] = \
|
|
{ [0 ... (TUNER_SIMPLE_MAX-1)] = 0 };
|
|
static unsigned int dtv_input[TUNER_SIMPLE_MAX] = \
|
|
{ [0 ... (TUNER_SIMPLE_MAX-1)] = 0 };
|
|
module_param_array(atv_input, int, NULL, 0644);
|
|
module_param_array(dtv_input, int, NULL, 0644);
|
|
MODULE_PARM_DESC(atv_input, "specify atv rf input, 0 for autoselect");
|
|
MODULE_PARM_DESC(dtv_input, "specify dtv rf input, 0 for autoselect");
|
|
|
|
/* ---------------------------------------------------------------------- */
|
|
|
|
/* tv standard selection for Temic 4046 FM5
|
|
this value takes the low bits of control byte 2
|
|
from datasheet Rev.01, Feb.00
|
|
standard BG I L L2 D
|
|
picture IF 38.9 38.9 38.9 33.95 38.9
|
|
sound 1 33.4 32.9 32.4 40.45 32.4
|
|
sound 2 33.16
|
|
NICAM 33.05 32.348 33.05 33.05
|
|
*/
|
|
#define TEMIC_SET_PAL_I 0x05
|
|
#define TEMIC_SET_PAL_DK 0x09
|
|
#define TEMIC_SET_PAL_L 0x0a /* SECAM ? */
|
|
#define TEMIC_SET_PAL_L2 0x0b /* change IF ! */
|
|
#define TEMIC_SET_PAL_BG 0x0c
|
|
|
|
/* tv tuner system standard selection for Philips FQ1216ME
|
|
this value takes the low bits of control byte 2
|
|
from datasheet "1999 Nov 16" (supersedes "1999 Mar 23")
|
|
standard BG DK I L L`
|
|
picture carrier 38.90 38.90 38.90 38.90 33.95
|
|
colour 34.47 34.47 34.47 34.47 38.38
|
|
sound 1 33.40 32.40 32.90 32.40 40.45
|
|
sound 2 33.16 - - - -
|
|
NICAM 33.05 33.05 32.35 33.05 39.80
|
|
*/
|
|
#define PHILIPS_SET_PAL_I 0x01 /* Bit 2 always zero !*/
|
|
#define PHILIPS_SET_PAL_BGDK 0x09
|
|
#define PHILIPS_SET_PAL_L2 0x0a
|
|
#define PHILIPS_SET_PAL_L 0x0b
|
|
|
|
/* system switching for Philips FI1216MF MK2
|
|
from datasheet "1996 Jul 09",
|
|
standard BG L L'
|
|
picture carrier 38.90 38.90 33.95
|
|
colour 34.47 34.37 38.38
|
|
sound 1 33.40 32.40 40.45
|
|
sound 2 33.16 - -
|
|
NICAM 33.05 33.05 39.80
|
|
*/
|
|
#define PHILIPS_MF_SET_STD_BG 0x01 /* Bit 2 must be zero, Bit 3 is system output */
|
|
#define PHILIPS_MF_SET_STD_L 0x03 /* Used on Secam France */
|
|
#define PHILIPS_MF_SET_STD_LC 0x02 /* Used on SECAM L' */
|
|
|
|
/* Control byte */
|
|
|
|
#define TUNER_RATIO_MASK 0x06 /* Bit cb1:cb2 */
|
|
#define TUNER_RATIO_SELECT_50 0x00
|
|
#define TUNER_RATIO_SELECT_32 0x02
|
|
#define TUNER_RATIO_SELECT_166 0x04
|
|
#define TUNER_RATIO_SELECT_62 0x06
|
|
|
|
#define TUNER_CHARGE_PUMP 0x40 /* Bit cb6 */
|
|
|
|
/* Status byte */
|
|
|
|
#define TUNER_POR 0x80
|
|
#define TUNER_FL 0x40
|
|
#define TUNER_MODE 0x38
|
|
#define TUNER_AFC 0x07
|
|
#define TUNER_SIGNAL 0x07
|
|
#define TUNER_STEREO 0x10
|
|
|
|
#define TUNER_PLL_LOCKED 0x40
|
|
#define TUNER_STEREO_MK3 0x04
|
|
|
|
static DEFINE_MUTEX(tuner_simple_list_mutex);
|
|
static LIST_HEAD(hybrid_tuner_instance_list);
|
|
|
|
struct tuner_simple_priv {
|
|
unsigned int nr;
|
|
u16 last_div;
|
|
|
|
struct tuner_i2c_props i2c_props;
|
|
struct list_head hybrid_tuner_instance_list;
|
|
|
|
unsigned int type;
|
|
struct tunertype *tun;
|
|
|
|
u32 frequency;
|
|
u32 bandwidth;
|
|
bool radio_mode;
|
|
};
|
|
|
|
/* ---------------------------------------------------------------------- */
|
|
|
|
static int tuner_read_status(struct dvb_frontend *fe)
|
|
{
|
|
struct tuner_simple_priv *priv = fe->tuner_priv;
|
|
unsigned char byte;
|
|
|
|
if (1 != tuner_i2c_xfer_recv(&priv->i2c_props, &byte, 1))
|
|
return 0;
|
|
|
|
return byte;
|
|
}
|
|
|
|
static inline int tuner_signal(const int status)
|
|
{
|
|
return (status & TUNER_SIGNAL) << 13;
|
|
}
|
|
|
|
static inline int tuner_stereo(const int type, const int status)
|
|
{
|
|
switch (type) {
|
|
case TUNER_PHILIPS_FM1216ME_MK3:
|
|
case TUNER_PHILIPS_FM1236_MK3:
|
|
case TUNER_PHILIPS_FM1256_IH3:
|
|
case TUNER_LG_NTSC_TAPE:
|
|
case TUNER_TCL_MF02GIP_5N:
|
|
return ((status & TUNER_SIGNAL) == TUNER_STEREO_MK3);
|
|
case TUNER_PHILIPS_FM1216MK5:
|
|
return status | TUNER_STEREO;
|
|
default:
|
|
return status & TUNER_STEREO;
|
|
}
|
|
}
|
|
|
|
static inline int tuner_islocked(const int status)
|
|
{
|
|
return (status & TUNER_FL);
|
|
}
|
|
|
|
static inline int tuner_afcstatus(const int status)
|
|
{
|
|
return (status & TUNER_AFC) - 2;
|
|
}
|
|
|
|
|
|
static int simple_get_status(struct dvb_frontend *fe, u32 *status)
|
|
{
|
|
struct tuner_simple_priv *priv = fe->tuner_priv;
|
|
int tuner_status;
|
|
|
|
if (priv->i2c_props.adap == NULL)
|
|
return -EINVAL;
|
|
|
|
tuner_status = tuner_read_status(fe);
|
|
|
|
*status = 0;
|
|
|
|
if (tuner_islocked(tuner_status))
|
|
*status = TUNER_STATUS_LOCKED;
|
|
if (tuner_stereo(priv->type, tuner_status))
|
|
*status |= TUNER_STATUS_STEREO;
|
|
|
|
tuner_dbg("AFC Status: %d\n", tuner_afcstatus(tuner_status));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int simple_get_rf_strength(struct dvb_frontend *fe, u16 *strength)
|
|
{
|
|
struct tuner_simple_priv *priv = fe->tuner_priv;
|
|
int signal;
|
|
|
|
if (priv->i2c_props.adap == NULL || !priv->radio_mode)
|
|
return -EINVAL;
|
|
|
|
signal = tuner_signal(tuner_read_status(fe));
|
|
|
|
*strength = signal;
|
|
|
|
tuner_dbg("Signal strength: %d\n", signal);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* ---------------------------------------------------------------------- */
|
|
|
|
static inline char *tuner_param_name(enum param_type type)
|
|
{
|
|
char *name;
|
|
|
|
switch (type) {
|
|
case TUNER_PARAM_TYPE_RADIO:
|
|
name = "radio";
|
|
break;
|
|
case TUNER_PARAM_TYPE_PAL:
|
|
name = "pal";
|
|
break;
|
|
case TUNER_PARAM_TYPE_SECAM:
|
|
name = "secam";
|
|
break;
|
|
case TUNER_PARAM_TYPE_NTSC:
|
|
name = "ntsc";
|
|
break;
|
|
case TUNER_PARAM_TYPE_DIGITAL:
|
|
name = "digital";
|
|
break;
|
|
default:
|
|
name = "unknown";
|
|
break;
|
|
}
|
|
return name;
|
|
}
|
|
|
|
static struct tuner_params *simple_tuner_params(struct dvb_frontend *fe,
|
|
enum param_type desired_type)
|
|
{
|
|
struct tuner_simple_priv *priv = fe->tuner_priv;
|
|
struct tunertype *tun = priv->tun;
|
|
int i;
|
|
|
|
for (i = 0; i < tun->count; i++)
|
|
if (desired_type == tun->params[i].type)
|
|
break;
|
|
|
|
/* use default tuner params if desired_type not available */
|
|
if (i == tun->count) {
|
|
tuner_dbg("desired params (%s) undefined for tuner %d\n",
|
|
tuner_param_name(desired_type), priv->type);
|
|
i = 0;
|
|
}
|
|
|
|
tuner_dbg("using tuner params #%d (%s)\n", i,
|
|
tuner_param_name(tun->params[i].type));
|
|
|
|
return &tun->params[i];
|
|
}
|
|
|
|
static int simple_config_lookup(struct dvb_frontend *fe,
|
|
struct tuner_params *t_params,
|
|
unsigned *frequency, u8 *config, u8 *cb)
|
|
{
|
|
struct tuner_simple_priv *priv = fe->tuner_priv;
|
|
int i;
|
|
|
|
for (i = 0; i < t_params->count; i++) {
|
|
if (*frequency > t_params->ranges[i].limit)
|
|
continue;
|
|
break;
|
|
}
|
|
if (i == t_params->count) {
|
|
tuner_dbg("frequency out of range (%d > %d)\n",
|
|
*frequency, t_params->ranges[i - 1].limit);
|
|
*frequency = t_params->ranges[--i].limit;
|
|
}
|
|
*config = t_params->ranges[i].config;
|
|
*cb = t_params->ranges[i].cb;
|
|
|
|
tuner_dbg("freq = %d.%02d (%d), range = %d, "
|
|
"config = 0x%02x, cb = 0x%02x\n",
|
|
*frequency / 16, *frequency % 16 * 100 / 16, *frequency,
|
|
i, *config, *cb);
|
|
|
|
return i;
|
|
}
|
|
|
|
/* ---------------------------------------------------------------------- */
|
|
|
|
static void simple_set_rf_input(struct dvb_frontend *fe,
|
|
u8 *config, u8 *cb, unsigned int rf)
|
|
{
|
|
struct tuner_simple_priv *priv = fe->tuner_priv;
|
|
|
|
switch (priv->type) {
|
|
case TUNER_PHILIPS_TUV1236D:
|
|
switch (rf) {
|
|
case 1:
|
|
*cb |= 0x08;
|
|
break;
|
|
default:
|
|
*cb &= ~0x08;
|
|
break;
|
|
}
|
|
break;
|
|
case TUNER_PHILIPS_FCV1236D:
|
|
switch (rf) {
|
|
case 1:
|
|
*cb |= 0x01;
|
|
break;
|
|
default:
|
|
*cb &= ~0x01;
|
|
break;
|
|
}
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
static int simple_std_setup(struct dvb_frontend *fe,
|
|
struct analog_parameters *params,
|
|
u8 *config, u8 *cb)
|
|
{
|
|
struct tuner_simple_priv *priv = fe->tuner_priv;
|
|
int rc;
|
|
|
|
/* tv norm specific stuff for multi-norm tuners */
|
|
switch (priv->type) {
|
|
case TUNER_PHILIPS_SECAM: /* FI1216MF */
|
|
/* 0x01 -> ??? no change ??? */
|
|
/* 0x02 -> PAL BDGHI / SECAM L */
|
|
/* 0x04 -> ??? PAL others / SECAM others ??? */
|
|
*cb &= ~0x03;
|
|
if (params->std & V4L2_STD_SECAM_L)
|
|
/* also valid for V4L2_STD_SECAM */
|
|
*cb |= PHILIPS_MF_SET_STD_L;
|
|
else if (params->std & V4L2_STD_SECAM_LC)
|
|
*cb |= PHILIPS_MF_SET_STD_LC;
|
|
else /* V4L2_STD_B|V4L2_STD_GH */
|
|
*cb |= PHILIPS_MF_SET_STD_BG;
|
|
break;
|
|
|
|
case TUNER_TEMIC_4046FM5:
|
|
*cb &= ~0x0f;
|
|
|
|
if (params->std & V4L2_STD_PAL_BG) {
|
|
*cb |= TEMIC_SET_PAL_BG;
|
|
|
|
} else if (params->std & V4L2_STD_PAL_I) {
|
|
*cb |= TEMIC_SET_PAL_I;
|
|
|
|
} else if (params->std & V4L2_STD_PAL_DK) {
|
|
*cb |= TEMIC_SET_PAL_DK;
|
|
|
|
} else if (params->std & V4L2_STD_SECAM_L) {
|
|
*cb |= TEMIC_SET_PAL_L;
|
|
|
|
}
|
|
break;
|
|
|
|
case TUNER_PHILIPS_FQ1216ME:
|
|
*cb &= ~0x0f;
|
|
|
|
if (params->std & (V4L2_STD_PAL_BG|V4L2_STD_PAL_DK)) {
|
|
*cb |= PHILIPS_SET_PAL_BGDK;
|
|
|
|
} else if (params->std & V4L2_STD_PAL_I) {
|
|
*cb |= PHILIPS_SET_PAL_I;
|
|
|
|
} else if (params->std & V4L2_STD_SECAM_L) {
|
|
*cb |= PHILIPS_SET_PAL_L;
|
|
|
|
}
|
|
break;
|
|
|
|
case TUNER_PHILIPS_FCV1236D:
|
|
/* 0x00 -> ATSC antenna input 1 */
|
|
/* 0x01 -> ATSC antenna input 2 */
|
|
/* 0x02 -> NTSC antenna input 1 */
|
|
/* 0x03 -> NTSC antenna input 2 */
|
|
*cb &= ~0x03;
|
|
if (!(params->std & V4L2_STD_ATSC))
|
|
*cb |= 2;
|
|
break;
|
|
|
|
case TUNER_MICROTUNE_4042FI5:
|
|
/* Set the charge pump for fast tuning */
|
|
*config |= TUNER_CHARGE_PUMP;
|
|
break;
|
|
|
|
case TUNER_PHILIPS_TUV1236D:
|
|
{
|
|
struct tuner_i2c_props i2c = priv->i2c_props;
|
|
/* 0x40 -> ATSC antenna input 1 */
|
|
/* 0x48 -> ATSC antenna input 2 */
|
|
/* 0x00 -> NTSC antenna input 1 */
|
|
/* 0x08 -> NTSC antenna input 2 */
|
|
u8 buffer[4] = { 0x14, 0x00, 0x17, 0x00};
|
|
*cb &= ~0x40;
|
|
if (params->std & V4L2_STD_ATSC) {
|
|
*cb |= 0x40;
|
|
buffer[1] = 0x04;
|
|
}
|
|
/* set to the correct mode (analog or digital) */
|
|
i2c.addr = 0x0a;
|
|
rc = tuner_i2c_xfer_send(&i2c, &buffer[0], 2);
|
|
if (2 != rc)
|
|
tuner_warn("i2c i/o error: rc == %d "
|
|
"(should be 2)\n", rc);
|
|
rc = tuner_i2c_xfer_send(&i2c, &buffer[2], 2);
|
|
if (2 != rc)
|
|
tuner_warn("i2c i/o error: rc == %d "
|
|
"(should be 2)\n", rc);
|
|
break;
|
|
}
|
|
}
|
|
if (atv_input[priv->nr])
|
|
simple_set_rf_input(fe, config, cb, atv_input[priv->nr]);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int simple_set_aux_byte(struct dvb_frontend *fe, u8 config, u8 aux)
|
|
{
|
|
struct tuner_simple_priv *priv = fe->tuner_priv;
|
|
int rc;
|
|
u8 buffer[2];
|
|
|
|
buffer[0] = (config & ~0x38) | 0x18;
|
|
buffer[1] = aux;
|
|
|
|
tuner_dbg("setting aux byte: 0x%02x 0x%02x\n", buffer[0], buffer[1]);
|
|
|
|
rc = tuner_i2c_xfer_send(&priv->i2c_props, buffer, 2);
|
|
if (2 != rc)
|
|
tuner_warn("i2c i/o error: rc == %d (should be 2)\n", rc);
|
|
|
|
return rc == 2 ? 0 : rc;
|
|
}
|
|
|
|
static int simple_post_tune(struct dvb_frontend *fe, u8 *buffer,
|
|
u16 div, u8 config, u8 cb)
|
|
{
|
|
struct tuner_simple_priv *priv = fe->tuner_priv;
|
|
int rc;
|
|
|
|
switch (priv->type) {
|
|
case TUNER_LG_TDVS_H06XF:
|
|
simple_set_aux_byte(fe, config, 0x20);
|
|
break;
|
|
case TUNER_PHILIPS_FQ1216LME_MK3:
|
|
simple_set_aux_byte(fe, config, 0x60); /* External AGC */
|
|
break;
|
|
case TUNER_MICROTUNE_4042FI5:
|
|
{
|
|
/* FIXME - this may also work for other tuners */
|
|
unsigned long timeout = jiffies + msecs_to_jiffies(1);
|
|
u8 status_byte = 0;
|
|
|
|
/* Wait until the PLL locks */
|
|
for (;;) {
|
|
if (time_after(jiffies, timeout))
|
|
return 0;
|
|
rc = tuner_i2c_xfer_recv(&priv->i2c_props,
|
|
&status_byte, 1);
|
|
if (1 != rc) {
|
|
tuner_warn("i2c i/o read error: rc == %d "
|
|
"(should be 1)\n", rc);
|
|
break;
|
|
}
|
|
if (status_byte & TUNER_PLL_LOCKED)
|
|
break;
|
|
udelay(10);
|
|
}
|
|
|
|
/* Set the charge pump for optimized phase noise figure */
|
|
config &= ~TUNER_CHARGE_PUMP;
|
|
buffer[0] = (div>>8) & 0x7f;
|
|
buffer[1] = div & 0xff;
|
|
buffer[2] = config;
|
|
buffer[3] = cb;
|
|
tuner_dbg("tv 0x%02x 0x%02x 0x%02x 0x%02x\n",
|
|
buffer[0], buffer[1], buffer[2], buffer[3]);
|
|
|
|
rc = tuner_i2c_xfer_send(&priv->i2c_props, buffer, 4);
|
|
if (4 != rc)
|
|
tuner_warn("i2c i/o error: rc == %d "
|
|
"(should be 4)\n", rc);
|
|
break;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int simple_radio_bandswitch(struct dvb_frontend *fe, u8 *buffer)
|
|
{
|
|
struct tuner_simple_priv *priv = fe->tuner_priv;
|
|
|
|
switch (priv->type) {
|
|
case TUNER_TENA_9533_DI:
|
|
case TUNER_YMEC_TVF_5533MF:
|
|
tuner_dbg("This tuner doesn't have FM. "
|
|
"Most cards have a TEA5767 for FM\n");
|
|
return 0;
|
|
case TUNER_PHILIPS_FM1216ME_MK3:
|
|
case TUNER_PHILIPS_FM1236_MK3:
|
|
case TUNER_PHILIPS_FMD1216ME_MK3:
|
|
case TUNER_PHILIPS_FMD1216MEX_MK3:
|
|
case TUNER_LG_NTSC_TAPE:
|
|
case TUNER_PHILIPS_FM1256_IH3:
|
|
case TUNER_TCL_MF02GIP_5N:
|
|
buffer[3] = 0x19;
|
|
break;
|
|
case TUNER_PHILIPS_FM1216MK5:
|
|
buffer[2] = 0x88;
|
|
buffer[3] = 0x09;
|
|
break;
|
|
case TUNER_TNF_5335MF:
|
|
buffer[3] = 0x11;
|
|
break;
|
|
case TUNER_LG_PAL_FM:
|
|
buffer[3] = 0xa5;
|
|
break;
|
|
case TUNER_THOMSON_DTT761X:
|
|
buffer[3] = 0x39;
|
|
break;
|
|
case TUNER_PHILIPS_FQ1216LME_MK3:
|
|
case TUNER_PHILIPS_FQ1236_MK5:
|
|
tuner_err("This tuner doesn't have FM\n");
|
|
/* Set the low band for sanity, since it covers 88-108 MHz */
|
|
buffer[3] = 0x01;
|
|
break;
|
|
case TUNER_MICROTUNE_4049FM5:
|
|
default:
|
|
buffer[3] = 0xa4;
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* ---------------------------------------------------------------------- */
|
|
|
|
static int simple_set_tv_freq(struct dvb_frontend *fe,
|
|
struct analog_parameters *params)
|
|
{
|
|
struct tuner_simple_priv *priv = fe->tuner_priv;
|
|
u8 config, cb;
|
|
u16 div;
|
|
u8 buffer[4];
|
|
int rc, IFPCoff, i;
|
|
enum param_type desired_type;
|
|
struct tuner_params *t_params;
|
|
|
|
/* IFPCoff = Video Intermediate Frequency - Vif:
|
|
940 =16*58.75 NTSC/J (Japan)
|
|
732 =16*45.75 M/N STD
|
|
704 =16*44 ATSC (at DVB code)
|
|
632 =16*39.50 I U.K.
|
|
622.4=16*38.90 B/G D/K I, L STD
|
|
592 =16*37.00 D China
|
|
590 =16.36.875 B Australia
|
|
543.2=16*33.95 L' STD
|
|
171.2=16*10.70 FM Radio (at set_radio_freq)
|
|
*/
|
|
|
|
if (params->std == V4L2_STD_NTSC_M_JP) {
|
|
IFPCoff = 940;
|
|
desired_type = TUNER_PARAM_TYPE_NTSC;
|
|
} else if ((params->std & V4L2_STD_MN) &&
|
|
!(params->std & ~V4L2_STD_MN)) {
|
|
IFPCoff = 732;
|
|
desired_type = TUNER_PARAM_TYPE_NTSC;
|
|
} else if (params->std == V4L2_STD_SECAM_LC) {
|
|
IFPCoff = 543;
|
|
desired_type = TUNER_PARAM_TYPE_SECAM;
|
|
} else {
|
|
IFPCoff = 623;
|
|
desired_type = TUNER_PARAM_TYPE_PAL;
|
|
}
|
|
|
|
t_params = simple_tuner_params(fe, desired_type);
|
|
|
|
i = simple_config_lookup(fe, t_params, ¶ms->frequency,
|
|
&config, &cb);
|
|
|
|
div = params->frequency + IFPCoff + offset;
|
|
|
|
tuner_dbg("Freq= %d.%02d MHz, V_IF=%d.%02d MHz, "
|
|
"Offset=%d.%02d MHz, div=%0d\n",
|
|
params->frequency / 16, params->frequency % 16 * 100 / 16,
|
|
IFPCoff / 16, IFPCoff % 16 * 100 / 16,
|
|
offset / 16, offset % 16 * 100 / 16, div);
|
|
|
|
/* tv norm specific stuff for multi-norm tuners */
|
|
simple_std_setup(fe, params, &config, &cb);
|
|
|
|
if (t_params->cb_first_if_lower_freq && div < priv->last_div) {
|
|
buffer[0] = config;
|
|
buffer[1] = cb;
|
|
buffer[2] = (div>>8) & 0x7f;
|
|
buffer[3] = div & 0xff;
|
|
} else {
|
|
buffer[0] = (div>>8) & 0x7f;
|
|
buffer[1] = div & 0xff;
|
|
buffer[2] = config;
|
|
buffer[3] = cb;
|
|
}
|
|
priv->last_div = div;
|
|
if (t_params->has_tda9887) {
|
|
struct v4l2_priv_tun_config tda9887_cfg;
|
|
int tda_config = 0;
|
|
int is_secam_l = (params->std & (V4L2_STD_SECAM_L |
|
|
V4L2_STD_SECAM_LC)) &&
|
|
!(params->std & ~(V4L2_STD_SECAM_L |
|
|
V4L2_STD_SECAM_LC));
|
|
|
|
tda9887_cfg.tuner = TUNER_TDA9887;
|
|
tda9887_cfg.priv = &tda_config;
|
|
|
|
if (params->std == V4L2_STD_SECAM_LC) {
|
|
if (t_params->port1_active ^ t_params->port1_invert_for_secam_lc)
|
|
tda_config |= TDA9887_PORT1_ACTIVE;
|
|
if (t_params->port2_active ^ t_params->port2_invert_for_secam_lc)
|
|
tda_config |= TDA9887_PORT2_ACTIVE;
|
|
} else {
|
|
if (t_params->port1_active)
|
|
tda_config |= TDA9887_PORT1_ACTIVE;
|
|
if (t_params->port2_active)
|
|
tda_config |= TDA9887_PORT2_ACTIVE;
|
|
}
|
|
if (t_params->intercarrier_mode)
|
|
tda_config |= TDA9887_INTERCARRIER;
|
|
if (is_secam_l) {
|
|
if (i == 0 && t_params->default_top_secam_low)
|
|
tda_config |= TDA9887_TOP(t_params->default_top_secam_low);
|
|
else if (i == 1 && t_params->default_top_secam_mid)
|
|
tda_config |= TDA9887_TOP(t_params->default_top_secam_mid);
|
|
else if (t_params->default_top_secam_high)
|
|
tda_config |= TDA9887_TOP(t_params->default_top_secam_high);
|
|
} else {
|
|
if (i == 0 && t_params->default_top_low)
|
|
tda_config |= TDA9887_TOP(t_params->default_top_low);
|
|
else if (i == 1 && t_params->default_top_mid)
|
|
tda_config |= TDA9887_TOP(t_params->default_top_mid);
|
|
else if (t_params->default_top_high)
|
|
tda_config |= TDA9887_TOP(t_params->default_top_high);
|
|
}
|
|
if (t_params->default_pll_gating_18)
|
|
tda_config |= TDA9887_GATING_18;
|
|
i2c_clients_command(priv->i2c_props.adap, TUNER_SET_CONFIG,
|
|
&tda9887_cfg);
|
|
}
|
|
tuner_dbg("tv 0x%02x 0x%02x 0x%02x 0x%02x\n",
|
|
buffer[0], buffer[1], buffer[2], buffer[3]);
|
|
|
|
rc = tuner_i2c_xfer_send(&priv->i2c_props, buffer, 4);
|
|
if (4 != rc)
|
|
tuner_warn("i2c i/o error: rc == %d (should be 4)\n", rc);
|
|
|
|
simple_post_tune(fe, &buffer[0], div, config, cb);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int simple_set_radio_freq(struct dvb_frontend *fe,
|
|
struct analog_parameters *params)
|
|
{
|
|
struct tunertype *tun;
|
|
struct tuner_simple_priv *priv = fe->tuner_priv;
|
|
u8 buffer[4];
|
|
u16 div;
|
|
int rc, j;
|
|
struct tuner_params *t_params;
|
|
unsigned int freq = params->frequency;
|
|
|
|
tun = priv->tun;
|
|
|
|
for (j = tun->count-1; j > 0; j--)
|
|
if (tun->params[j].type == TUNER_PARAM_TYPE_RADIO)
|
|
break;
|
|
/* default t_params (j=0) will be used if desired type wasn't found */
|
|
t_params = &tun->params[j];
|
|
|
|
/* Select Radio 1st IF used */
|
|
switch (t_params->radio_if) {
|
|
case 0: /* 10.7 MHz */
|
|
freq += (unsigned int)(10.7*16000);
|
|
break;
|
|
case 1: /* 33.3 MHz */
|
|
freq += (unsigned int)(33.3*16000);
|
|
break;
|
|
case 2: /* 41.3 MHz */
|
|
freq += (unsigned int)(41.3*16000);
|
|
break;
|
|
default:
|
|
tuner_warn("Unsupported radio_if value %d\n",
|
|
t_params->radio_if);
|
|
return 0;
|
|
}
|
|
|
|
buffer[2] = (t_params->ranges[0].config & ~TUNER_RATIO_MASK) |
|
|
TUNER_RATIO_SELECT_50; /* 50 kHz step */
|
|
|
|
/* Bandswitch byte */
|
|
simple_radio_bandswitch(fe, &buffer[0]);
|
|
|
|
/* Convert from 1/16 kHz V4L steps to 1/20 MHz (=50 kHz) PLL steps
|
|
freq * (1 Mhz / 16000 V4L steps) * (20 PLL steps / 1 MHz) =
|
|
freq * (1/800) */
|
|
div = (freq + 400) / 800;
|
|
|
|
if (t_params->cb_first_if_lower_freq && div < priv->last_div) {
|
|
buffer[0] = buffer[2];
|
|
buffer[1] = buffer[3];
|
|
buffer[2] = (div>>8) & 0x7f;
|
|
buffer[3] = div & 0xff;
|
|
} else {
|
|
buffer[0] = (div>>8) & 0x7f;
|
|
buffer[1] = div & 0xff;
|
|
}
|
|
|
|
tuner_dbg("radio 0x%02x 0x%02x 0x%02x 0x%02x\n",
|
|
buffer[0], buffer[1], buffer[2], buffer[3]);
|
|
priv->last_div = div;
|
|
|
|
if (t_params->has_tda9887) {
|
|
int config = 0;
|
|
struct v4l2_priv_tun_config tda9887_cfg;
|
|
|
|
tda9887_cfg.tuner = TUNER_TDA9887;
|
|
tda9887_cfg.priv = &config;
|
|
|
|
if (t_params->port1_active &&
|
|
!t_params->port1_fm_high_sensitivity)
|
|
config |= TDA9887_PORT1_ACTIVE;
|
|
if (t_params->port2_active &&
|
|
!t_params->port2_fm_high_sensitivity)
|
|
config |= TDA9887_PORT2_ACTIVE;
|
|
if (t_params->intercarrier_mode)
|
|
config |= TDA9887_INTERCARRIER;
|
|
/* if (t_params->port1_set_for_fm_mono)
|
|
config &= ~TDA9887_PORT1_ACTIVE;*/
|
|
if (t_params->fm_gain_normal)
|
|
config |= TDA9887_GAIN_NORMAL;
|
|
if (t_params->radio_if == 2)
|
|
config |= TDA9887_RIF_41_3;
|
|
i2c_clients_command(priv->i2c_props.adap, TUNER_SET_CONFIG,
|
|
&tda9887_cfg);
|
|
}
|
|
rc = tuner_i2c_xfer_send(&priv->i2c_props, buffer, 4);
|
|
if (4 != rc)
|
|
tuner_warn("i2c i/o error: rc == %d (should be 4)\n", rc);
|
|
|
|
/* Write AUX byte */
|
|
switch (priv->type) {
|
|
case TUNER_PHILIPS_FM1216ME_MK3:
|
|
buffer[2] = 0x98;
|
|
buffer[3] = 0x20; /* set TOP AGC */
|
|
rc = tuner_i2c_xfer_send(&priv->i2c_props, buffer, 4);
|
|
if (4 != rc)
|
|
tuner_warn("i2c i/o error: rc == %d (should be 4)\n", rc);
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int simple_set_params(struct dvb_frontend *fe,
|
|
struct analog_parameters *params)
|
|
{
|
|
struct tuner_simple_priv *priv = fe->tuner_priv;
|
|
int ret = -EINVAL;
|
|
|
|
if (priv->i2c_props.adap == NULL)
|
|
return -EINVAL;
|
|
|
|
switch (params->mode) {
|
|
case V4L2_TUNER_RADIO:
|
|
priv->radio_mode = true;
|
|
ret = simple_set_radio_freq(fe, params);
|
|
priv->frequency = params->frequency * 125 / 2;
|
|
break;
|
|
case V4L2_TUNER_ANALOG_TV:
|
|
case V4L2_TUNER_DIGITAL_TV:
|
|
priv->radio_mode = false;
|
|
ret = simple_set_tv_freq(fe, params);
|
|
priv->frequency = params->frequency * 62500;
|
|
break;
|
|
}
|
|
priv->bandwidth = 0;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void simple_set_dvb(struct dvb_frontend *fe, u8 *buf,
|
|
const u32 delsys,
|
|
const u32 frequency,
|
|
const u32 bandwidth)
|
|
{
|
|
struct tuner_simple_priv *priv = fe->tuner_priv;
|
|
|
|
switch (priv->type) {
|
|
case TUNER_PHILIPS_FMD1216ME_MK3:
|
|
case TUNER_PHILIPS_FMD1216MEX_MK3:
|
|
if (bandwidth == 8000000 &&
|
|
frequency >= 158870000)
|
|
buf[3] |= 0x08;
|
|
break;
|
|
case TUNER_PHILIPS_TD1316:
|
|
/* determine band */
|
|
buf[3] |= (frequency < 161000000) ? 1 :
|
|
(frequency < 444000000) ? 2 : 4;
|
|
|
|
/* setup PLL filter */
|
|
if (bandwidth == 8000000)
|
|
buf[3] |= 1 << 3;
|
|
break;
|
|
case TUNER_PHILIPS_TUV1236D:
|
|
case TUNER_PHILIPS_FCV1236D:
|
|
{
|
|
unsigned int new_rf;
|
|
|
|
if (dtv_input[priv->nr])
|
|
new_rf = dtv_input[priv->nr];
|
|
else
|
|
switch (delsys) {
|
|
case SYS_DVBC_ANNEX_B:
|
|
new_rf = 1;
|
|
break;
|
|
case SYS_ATSC:
|
|
default:
|
|
new_rf = 0;
|
|
break;
|
|
}
|
|
simple_set_rf_input(fe, &buf[2], &buf[3], new_rf);
|
|
break;
|
|
}
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
static u32 simple_dvb_configure(struct dvb_frontend *fe, u8 *buf,
|
|
const u32 delsys,
|
|
const u32 freq,
|
|
const u32 bw)
|
|
{
|
|
/* This function returns the tuned frequency on success, 0 on error */
|
|
struct tuner_simple_priv *priv = fe->tuner_priv;
|
|
struct tunertype *tun = priv->tun;
|
|
static struct tuner_params *t_params;
|
|
u8 config, cb;
|
|
u32 div;
|
|
int ret;
|
|
u32 frequency = freq / 62500;
|
|
|
|
if (!tun->stepsize) {
|
|
/* tuner-core was loaded before the digital tuner was
|
|
* configured and somehow picked the wrong tuner type */
|
|
tuner_err("attempt to treat tuner %d (%s) as digital tuner "
|
|
"without stepsize defined.\n",
|
|
priv->type, priv->tun->name);
|
|
return 0; /* failure */
|
|
}
|
|
|
|
t_params = simple_tuner_params(fe, TUNER_PARAM_TYPE_DIGITAL);
|
|
ret = simple_config_lookup(fe, t_params, &frequency, &config, &cb);
|
|
if (ret < 0)
|
|
return 0; /* failure */
|
|
|
|
div = ((frequency + t_params->iffreq) * 62500 + offset +
|
|
tun->stepsize/2) / tun->stepsize;
|
|
|
|
buf[0] = div >> 8;
|
|
buf[1] = div & 0xff;
|
|
buf[2] = config;
|
|
buf[3] = cb;
|
|
|
|
simple_set_dvb(fe, buf, delsys, freq, bw);
|
|
|
|
tuner_dbg("%s: div=%d | buf=0x%02x,0x%02x,0x%02x,0x%02x\n",
|
|
tun->name, div, buf[0], buf[1], buf[2], buf[3]);
|
|
|
|
/* calculate the frequency we set it to */
|
|
return (div * tun->stepsize) - t_params->iffreq;
|
|
}
|
|
|
|
static int simple_dvb_calc_regs(struct dvb_frontend *fe,
|
|
u8 *buf, int buf_len)
|
|
{
|
|
struct dtv_frontend_properties *c = &fe->dtv_property_cache;
|
|
u32 delsys = c->delivery_system;
|
|
u32 bw = c->bandwidth_hz;
|
|
struct tuner_simple_priv *priv = fe->tuner_priv;
|
|
u32 frequency;
|
|
|
|
if (buf_len < 5)
|
|
return -EINVAL;
|
|
|
|
frequency = simple_dvb_configure(fe, buf+1, delsys, c->frequency, bw);
|
|
if (frequency == 0)
|
|
return -EINVAL;
|
|
|
|
buf[0] = priv->i2c_props.addr;
|
|
|
|
priv->frequency = frequency;
|
|
priv->bandwidth = c->bandwidth_hz;
|
|
|
|
return 5;
|
|
}
|
|
|
|
static int simple_dvb_set_params(struct dvb_frontend *fe)
|
|
{
|
|
struct dtv_frontend_properties *c = &fe->dtv_property_cache;
|
|
u32 delsys = c->delivery_system;
|
|
u32 bw = c->bandwidth_hz;
|
|
u32 freq = c->frequency;
|
|
struct tuner_simple_priv *priv = fe->tuner_priv;
|
|
u32 frequency;
|
|
u32 prev_freq, prev_bw;
|
|
int ret;
|
|
u8 buf[5];
|
|
|
|
if (priv->i2c_props.adap == NULL)
|
|
return -EINVAL;
|
|
|
|
prev_freq = priv->frequency;
|
|
prev_bw = priv->bandwidth;
|
|
|
|
frequency = simple_dvb_configure(fe, buf+1, delsys, freq, bw);
|
|
if (frequency == 0)
|
|
return -EINVAL;
|
|
|
|
buf[0] = priv->i2c_props.addr;
|
|
|
|
priv->frequency = frequency;
|
|
priv->bandwidth = bw;
|
|
|
|
/* put analog demod in standby when tuning digital */
|
|
if (fe->ops.analog_ops.standby)
|
|
fe->ops.analog_ops.standby(fe);
|
|
|
|
if (fe->ops.i2c_gate_ctrl)
|
|
fe->ops.i2c_gate_ctrl(fe, 1);
|
|
|
|
/* buf[0] contains the i2c address, but *
|
|
* we already have it in i2c_props.addr */
|
|
ret = tuner_i2c_xfer_send(&priv->i2c_props, buf+1, 4);
|
|
if (ret != 4)
|
|
goto fail;
|
|
|
|
return 0;
|
|
fail:
|
|
/* calc_regs sets frequency and bandwidth. if we failed, unset them */
|
|
priv->frequency = prev_freq;
|
|
priv->bandwidth = prev_bw;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int simple_init(struct dvb_frontend *fe)
|
|
{
|
|
struct tuner_simple_priv *priv = fe->tuner_priv;
|
|
|
|
if (priv->i2c_props.adap == NULL)
|
|
return -EINVAL;
|
|
|
|
if (priv->tun->initdata) {
|
|
int ret;
|
|
|
|
if (fe->ops.i2c_gate_ctrl)
|
|
fe->ops.i2c_gate_ctrl(fe, 1);
|
|
|
|
ret = tuner_i2c_xfer_send(&priv->i2c_props,
|
|
priv->tun->initdata + 1,
|
|
priv->tun->initdata[0]);
|
|
if (ret != priv->tun->initdata[0])
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int simple_sleep(struct dvb_frontend *fe)
|
|
{
|
|
struct tuner_simple_priv *priv = fe->tuner_priv;
|
|
|
|
if (priv->i2c_props.adap == NULL)
|
|
return -EINVAL;
|
|
|
|
if (priv->tun->sleepdata) {
|
|
int ret;
|
|
|
|
if (fe->ops.i2c_gate_ctrl)
|
|
fe->ops.i2c_gate_ctrl(fe, 1);
|
|
|
|
ret = tuner_i2c_xfer_send(&priv->i2c_props,
|
|
priv->tun->sleepdata + 1,
|
|
priv->tun->sleepdata[0]);
|
|
if (ret != priv->tun->sleepdata[0])
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int simple_release(struct dvb_frontend *fe)
|
|
{
|
|
struct tuner_simple_priv *priv = fe->tuner_priv;
|
|
|
|
mutex_lock(&tuner_simple_list_mutex);
|
|
|
|
if (priv)
|
|
hybrid_tuner_release_state(priv);
|
|
|
|
mutex_unlock(&tuner_simple_list_mutex);
|
|
|
|
fe->tuner_priv = NULL;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int simple_get_frequency(struct dvb_frontend *fe, u32 *frequency)
|
|
{
|
|
struct tuner_simple_priv *priv = fe->tuner_priv;
|
|
*frequency = priv->frequency;
|
|
return 0;
|
|
}
|
|
|
|
static int simple_get_bandwidth(struct dvb_frontend *fe, u32 *bandwidth)
|
|
{
|
|
struct tuner_simple_priv *priv = fe->tuner_priv;
|
|
*bandwidth = priv->bandwidth;
|
|
return 0;
|
|
}
|
|
|
|
static struct dvb_tuner_ops simple_tuner_ops = {
|
|
.init = simple_init,
|
|
.sleep = simple_sleep,
|
|
.set_analog_params = simple_set_params,
|
|
.set_params = simple_dvb_set_params,
|
|
.calc_regs = simple_dvb_calc_regs,
|
|
.release = simple_release,
|
|
.get_frequency = simple_get_frequency,
|
|
.get_bandwidth = simple_get_bandwidth,
|
|
.get_status = simple_get_status,
|
|
.get_rf_strength = simple_get_rf_strength,
|
|
};
|
|
|
|
struct dvb_frontend *simple_tuner_attach(struct dvb_frontend *fe,
|
|
struct i2c_adapter *i2c_adap,
|
|
u8 i2c_addr,
|
|
unsigned int type)
|
|
{
|
|
struct tuner_simple_priv *priv = NULL;
|
|
int instance;
|
|
|
|
if (type >= tuner_count) {
|
|
printk(KERN_WARNING "%s: invalid tuner type: %d (max: %d)\n",
|
|
__func__, type, tuner_count-1);
|
|
return NULL;
|
|
}
|
|
|
|
/* If i2c_adap is set, check that the tuner is at the correct address.
|
|
* Otherwise, if i2c_adap is NULL, the tuner will be programmed directly
|
|
* by the digital demod via calc_regs.
|
|
*/
|
|
if (i2c_adap != NULL) {
|
|
u8 b[1];
|
|
struct i2c_msg msg = {
|
|
.addr = i2c_addr, .flags = I2C_M_RD,
|
|
.buf = b, .len = 1,
|
|
};
|
|
|
|
if (fe->ops.i2c_gate_ctrl)
|
|
fe->ops.i2c_gate_ctrl(fe, 1);
|
|
|
|
if (1 != i2c_transfer(i2c_adap, &msg, 1))
|
|
printk(KERN_WARNING "tuner-simple %d-%04x: "
|
|
"unable to probe %s, proceeding anyway.",
|
|
i2c_adapter_id(i2c_adap), i2c_addr,
|
|
tuners[type].name);
|
|
|
|
if (fe->ops.i2c_gate_ctrl)
|
|
fe->ops.i2c_gate_ctrl(fe, 0);
|
|
}
|
|
|
|
mutex_lock(&tuner_simple_list_mutex);
|
|
|
|
instance = hybrid_tuner_request_state(struct tuner_simple_priv, priv,
|
|
hybrid_tuner_instance_list,
|
|
i2c_adap, i2c_addr,
|
|
"tuner-simple");
|
|
switch (instance) {
|
|
case 0:
|
|
mutex_unlock(&tuner_simple_list_mutex);
|
|
return NULL;
|
|
case 1:
|
|
fe->tuner_priv = priv;
|
|
|
|
priv->type = type;
|
|
priv->tun = &tuners[type];
|
|
priv->nr = simple_devcount++;
|
|
break;
|
|
default:
|
|
fe->tuner_priv = priv;
|
|
break;
|
|
}
|
|
|
|
mutex_unlock(&tuner_simple_list_mutex);
|
|
|
|
memcpy(&fe->ops.tuner_ops, &simple_tuner_ops,
|
|
sizeof(struct dvb_tuner_ops));
|
|
|
|
if (type != priv->type)
|
|
tuner_warn("couldn't set type to %d. Using %d (%s) instead\n",
|
|
type, priv->type, priv->tun->name);
|
|
else
|
|
tuner_info("type set to %d (%s)\n",
|
|
priv->type, priv->tun->name);
|
|
|
|
if ((debug) || ((atv_input[priv->nr] > 0) ||
|
|
(dtv_input[priv->nr] > 0))) {
|
|
if (0 == atv_input[priv->nr])
|
|
tuner_info("tuner %d atv rf input will be "
|
|
"autoselected\n", priv->nr);
|
|
else
|
|
tuner_info("tuner %d atv rf input will be "
|
|
"set to input %d (insmod option)\n",
|
|
priv->nr, atv_input[priv->nr]);
|
|
if (0 == dtv_input[priv->nr])
|
|
tuner_info("tuner %d dtv rf input will be "
|
|
"autoselected\n", priv->nr);
|
|
else
|
|
tuner_info("tuner %d dtv rf input will be "
|
|
"set to input %d (insmod option)\n",
|
|
priv->nr, dtv_input[priv->nr]);
|
|
}
|
|
|
|
strlcpy(fe->ops.tuner_ops.info.name, priv->tun->name,
|
|
sizeof(fe->ops.tuner_ops.info.name));
|
|
|
|
return fe;
|
|
}
|
|
EXPORT_SYMBOL_GPL(simple_tuner_attach);
|
|
|
|
MODULE_DESCRIPTION("Simple 4-control-bytes style tuner driver");
|
|
MODULE_AUTHOR("Ralph Metzler, Gerd Knorr, Gunther Mayer");
|
|
MODULE_LICENSE("GPL");
|