linux/sound/soc/codecs/wm8903.c
Kuninori Morimoto 26d3c16e62
ASoC: codecs: wm*: merge .digital_mute() into .mute_stream()
snd_soc_dai_digital_mute() is internally using both
mute_stream() (1) or digital_mute() (2), but the difference between
these 2 are only handling direction.
We can merge digital_mute() into mute_stream

	int snd_soc_dai_digital_mute(xxx, int direction)
	{
		...
		else if (dai->driver->ops->mute_stream)
(1)			return dai->driver->ops->mute_stream(xxx, direction);
		else if (direction == SNDRV_PCM_STREAM_PLAYBACK &&
			 dai->driver->ops->digital_mute)
(2)			return dai->driver->ops->digital_mute(xxx);
		...
	}

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/87v9ixwiwr.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-16 23:06:16 +01:00

2229 lines
65 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
/*
* wm8903.c -- WM8903 ALSA SoC Audio driver
*
* Copyright 2008-12 Wolfson Microelectronics
* Copyright 2011-2012 NVIDIA, Inc.
*
* Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
*
* TODO:
* - TDM mode configuration.
* - Digital microphone support.
*/
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/init.h>
#include <linux/completion.h>
#include <linux/delay.h>
#include <linux/gpio/driver.h>
#include <linux/pm.h>
#include <linux/i2c.h>
#include <linux/regmap.h>
#include <linux/regulator/consumer.h>
#include <linux/slab.h>
#include <linux/irq.h>
#include <linux/mutex.h>
#include <sound/core.h>
#include <sound/jack.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
#include <sound/tlv.h>
#include <sound/soc.h>
#include <sound/initval.h>
#include <sound/wm8903.h>
#include <trace/events/asoc.h>
#include "wm8903.h"
/* Register defaults at reset */
static const struct reg_default wm8903_reg_defaults[] = {
{ 4, 0x0018 }, /* R4 - Bias Control 0 */
{ 5, 0x0000 }, /* R5 - VMID Control 0 */
{ 6, 0x0000 }, /* R6 - Mic Bias Control 0 */
{ 8, 0x0001 }, /* R8 - Analogue DAC 0 */
{ 10, 0x0001 }, /* R10 - Analogue ADC 0 */
{ 12, 0x0000 }, /* R12 - Power Management 0 */
{ 13, 0x0000 }, /* R13 - Power Management 1 */
{ 14, 0x0000 }, /* R14 - Power Management 2 */
{ 15, 0x0000 }, /* R15 - Power Management 3 */
{ 16, 0x0000 }, /* R16 - Power Management 4 */
{ 17, 0x0000 }, /* R17 - Power Management 5 */
{ 18, 0x0000 }, /* R18 - Power Management 6 */
{ 20, 0x0400 }, /* R20 - Clock Rates 0 */
{ 21, 0x0D07 }, /* R21 - Clock Rates 1 */
{ 22, 0x0000 }, /* R22 - Clock Rates 2 */
{ 24, 0x0050 }, /* R24 - Audio Interface 0 */
{ 25, 0x0242 }, /* R25 - Audio Interface 1 */
{ 26, 0x0008 }, /* R26 - Audio Interface 2 */
{ 27, 0x0022 }, /* R27 - Audio Interface 3 */
{ 30, 0x00C0 }, /* R30 - DAC Digital Volume Left */
{ 31, 0x00C0 }, /* R31 - DAC Digital Volume Right */
{ 32, 0x0000 }, /* R32 - DAC Digital 0 */
{ 33, 0x0000 }, /* R33 - DAC Digital 1 */
{ 36, 0x00C0 }, /* R36 - ADC Digital Volume Left */
{ 37, 0x00C0 }, /* R37 - ADC Digital Volume Right */
{ 38, 0x0000 }, /* R38 - ADC Digital 0 */
{ 39, 0x0073 }, /* R39 - Digital Microphone 0 */
{ 40, 0x09BF }, /* R40 - DRC 0 */
{ 41, 0x3241 }, /* R41 - DRC 1 */
{ 42, 0x0020 }, /* R42 - DRC 2 */
{ 43, 0x0000 }, /* R43 - DRC 3 */
{ 44, 0x0085 }, /* R44 - Analogue Left Input 0 */
{ 45, 0x0085 }, /* R45 - Analogue Right Input 0 */
{ 46, 0x0044 }, /* R46 - Analogue Left Input 1 */
{ 47, 0x0044 }, /* R47 - Analogue Right Input 1 */
{ 50, 0x0008 }, /* R50 - Analogue Left Mix 0 */
{ 51, 0x0004 }, /* R51 - Analogue Right Mix 0 */
{ 52, 0x0000 }, /* R52 - Analogue Spk Mix Left 0 */
{ 53, 0x0000 }, /* R53 - Analogue Spk Mix Left 1 */
{ 54, 0x0000 }, /* R54 - Analogue Spk Mix Right 0 */
{ 55, 0x0000 }, /* R55 - Analogue Spk Mix Right 1 */
{ 57, 0x002D }, /* R57 - Analogue OUT1 Left */
{ 58, 0x002D }, /* R58 - Analogue OUT1 Right */
{ 59, 0x0039 }, /* R59 - Analogue OUT2 Left */
{ 60, 0x0039 }, /* R60 - Analogue OUT2 Right */
{ 62, 0x0139 }, /* R62 - Analogue OUT3 Left */
{ 63, 0x0139 }, /* R63 - Analogue OUT3 Right */
{ 64, 0x0000 }, /* R65 - Analogue SPK Output Control 0 */
{ 67, 0x0010 }, /* R67 - DC Servo 0 */
{ 69, 0x00A4 }, /* R69 - DC Servo 2 */
{ 90, 0x0000 }, /* R90 - Analogue HP 0 */
{ 94, 0x0000 }, /* R94 - Analogue Lineout 0 */
{ 98, 0x0000 }, /* R98 - Charge Pump 0 */
{ 104, 0x0000 }, /* R104 - Class W 0 */
{ 108, 0x0000 }, /* R108 - Write Sequencer 0 */
{ 109, 0x0000 }, /* R109 - Write Sequencer 1 */
{ 110, 0x0000 }, /* R110 - Write Sequencer 2 */
{ 111, 0x0000 }, /* R111 - Write Sequencer 3 */
{ 112, 0x0000 }, /* R112 - Write Sequencer 4 */
{ 114, 0x0000 }, /* R114 - Control Interface */
{ 116, 0x00A8 }, /* R116 - GPIO Control 1 */
{ 117, 0x00A8 }, /* R117 - GPIO Control 2 */
{ 118, 0x00A8 }, /* R118 - GPIO Control 3 */
{ 119, 0x0220 }, /* R119 - GPIO Control 4 */
{ 120, 0x01A0 }, /* R120 - GPIO Control 5 */
{ 122, 0xFFFF }, /* R122 - Interrupt Status 1 Mask */
{ 123, 0x0000 }, /* R123 - Interrupt Polarity 1 */
{ 126, 0x0000 }, /* R126 - Interrupt Control */
{ 129, 0x0000 }, /* R129 - Control Interface Test 1 */
{ 149, 0x6810 }, /* R149 - Charge Pump Test 1 */
{ 164, 0x0028 }, /* R164 - Clock Rate Test 4 */
{ 172, 0x0000 }, /* R172 - Analogue Output Bias 0 */
};
#define WM8903_NUM_SUPPLIES 4
static const char *wm8903_supply_names[WM8903_NUM_SUPPLIES] = {
"AVDD",
"CPVDD",
"DBVDD",
"DCVDD",
};
struct wm8903_priv {
struct wm8903_platform_data *pdata;
struct device *dev;
struct regmap *regmap;
struct regulator_bulk_data supplies[WM8903_NUM_SUPPLIES];
int sysclk;
int irq;
struct mutex lock;
int fs;
int deemph;
int dcs_pending;
int dcs_cache[4];
/* Reference count */
int class_w_users;
struct snd_soc_jack *mic_jack;
int mic_det;
int mic_short;
int mic_last_report;
int mic_delay;
#ifdef CONFIG_GPIOLIB
struct gpio_chip gpio_chip;
#endif
};
static bool wm8903_readable_register(struct device *dev, unsigned int reg)
{
switch (reg) {
case WM8903_SW_RESET_AND_ID:
case WM8903_REVISION_NUMBER:
case WM8903_BIAS_CONTROL_0:
case WM8903_VMID_CONTROL_0:
case WM8903_MIC_BIAS_CONTROL_0:
case WM8903_ANALOGUE_DAC_0:
case WM8903_ANALOGUE_ADC_0:
case WM8903_POWER_MANAGEMENT_0:
case WM8903_POWER_MANAGEMENT_1:
case WM8903_POWER_MANAGEMENT_2:
case WM8903_POWER_MANAGEMENT_3:
case WM8903_POWER_MANAGEMENT_4:
case WM8903_POWER_MANAGEMENT_5:
case WM8903_POWER_MANAGEMENT_6:
case WM8903_CLOCK_RATES_0:
case WM8903_CLOCK_RATES_1:
case WM8903_CLOCK_RATES_2:
case WM8903_AUDIO_INTERFACE_0:
case WM8903_AUDIO_INTERFACE_1:
case WM8903_AUDIO_INTERFACE_2:
case WM8903_AUDIO_INTERFACE_3:
case WM8903_DAC_DIGITAL_VOLUME_LEFT:
case WM8903_DAC_DIGITAL_VOLUME_RIGHT:
case WM8903_DAC_DIGITAL_0:
case WM8903_DAC_DIGITAL_1:
case WM8903_ADC_DIGITAL_VOLUME_LEFT:
case WM8903_ADC_DIGITAL_VOLUME_RIGHT:
case WM8903_ADC_DIGITAL_0:
case WM8903_DIGITAL_MICROPHONE_0:
case WM8903_DRC_0:
case WM8903_DRC_1:
case WM8903_DRC_2:
case WM8903_DRC_3:
case WM8903_ANALOGUE_LEFT_INPUT_0:
case WM8903_ANALOGUE_RIGHT_INPUT_0:
case WM8903_ANALOGUE_LEFT_INPUT_1:
case WM8903_ANALOGUE_RIGHT_INPUT_1:
case WM8903_ANALOGUE_LEFT_MIX_0:
case WM8903_ANALOGUE_RIGHT_MIX_0:
case WM8903_ANALOGUE_SPK_MIX_LEFT_0:
case WM8903_ANALOGUE_SPK_MIX_LEFT_1:
case WM8903_ANALOGUE_SPK_MIX_RIGHT_0:
case WM8903_ANALOGUE_SPK_MIX_RIGHT_1:
case WM8903_ANALOGUE_OUT1_LEFT:
case WM8903_ANALOGUE_OUT1_RIGHT:
case WM8903_ANALOGUE_OUT2_LEFT:
case WM8903_ANALOGUE_OUT2_RIGHT:
case WM8903_ANALOGUE_OUT3_LEFT:
case WM8903_ANALOGUE_OUT3_RIGHT:
case WM8903_ANALOGUE_SPK_OUTPUT_CONTROL_0:
case WM8903_DC_SERVO_0:
case WM8903_DC_SERVO_2:
case WM8903_DC_SERVO_READBACK_1:
case WM8903_DC_SERVO_READBACK_2:
case WM8903_DC_SERVO_READBACK_3:
case WM8903_DC_SERVO_READBACK_4:
case WM8903_ANALOGUE_HP_0:
case WM8903_ANALOGUE_LINEOUT_0:
case WM8903_CHARGE_PUMP_0:
case WM8903_CLASS_W_0:
case WM8903_WRITE_SEQUENCER_0:
case WM8903_WRITE_SEQUENCER_1:
case WM8903_WRITE_SEQUENCER_2:
case WM8903_WRITE_SEQUENCER_3:
case WM8903_WRITE_SEQUENCER_4:
case WM8903_CONTROL_INTERFACE:
case WM8903_GPIO_CONTROL_1:
case WM8903_GPIO_CONTROL_2:
case WM8903_GPIO_CONTROL_3:
case WM8903_GPIO_CONTROL_4:
case WM8903_GPIO_CONTROL_5:
case WM8903_INTERRUPT_STATUS_1:
case WM8903_INTERRUPT_STATUS_1_MASK:
case WM8903_INTERRUPT_POLARITY_1:
case WM8903_INTERRUPT_CONTROL:
case WM8903_CLOCK_RATE_TEST_4:
case WM8903_ANALOGUE_OUTPUT_BIAS_0:
return true;
default:
return false;
}
}
static bool wm8903_volatile_register(struct device *dev, unsigned int reg)
{
switch (reg) {
case WM8903_SW_RESET_AND_ID:
case WM8903_REVISION_NUMBER:
case WM8903_INTERRUPT_STATUS_1:
case WM8903_WRITE_SEQUENCER_4:
case WM8903_DC_SERVO_READBACK_1:
case WM8903_DC_SERVO_READBACK_2:
case WM8903_DC_SERVO_READBACK_3:
case WM8903_DC_SERVO_READBACK_4:
return true;
default:
return false;
}
}
static int wm8903_cp_event(struct snd_soc_dapm_widget *w,
struct snd_kcontrol *kcontrol, int event)
{
WARN_ON(event != SND_SOC_DAPM_POST_PMU);
mdelay(4);
return 0;
}
static int wm8903_dcs_event(struct snd_soc_dapm_widget *w,
struct snd_kcontrol *kcontrol, int event)
{
struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm);
struct wm8903_priv *wm8903 = snd_soc_component_get_drvdata(component);
switch (event) {
case SND_SOC_DAPM_POST_PMU:
wm8903->dcs_pending |= 1 << w->shift;
break;
case SND_SOC_DAPM_PRE_PMD:
snd_soc_component_update_bits(component, WM8903_DC_SERVO_0,
1 << w->shift, 0);
break;
}
return 0;
}
#define WM8903_DCS_MODE_WRITE_STOP 0
#define WM8903_DCS_MODE_START_STOP 2
static void wm8903_seq_notifier(struct snd_soc_component *component,
enum snd_soc_dapm_type event, int subseq)
{
struct wm8903_priv *wm8903 = snd_soc_component_get_drvdata(component);
int dcs_mode = WM8903_DCS_MODE_WRITE_STOP;
int i, val;
/* Complete any pending DC servo starts */
if (wm8903->dcs_pending) {
dev_dbg(component->dev, "Starting DC servo for %x\n",
wm8903->dcs_pending);
/* If we've no cached values then we need to do startup */
for (i = 0; i < ARRAY_SIZE(wm8903->dcs_cache); i++) {
if (!(wm8903->dcs_pending & (1 << i)))
continue;
if (wm8903->dcs_cache[i]) {
dev_dbg(component->dev,
"Restore DC servo %d value %x\n",
3 - i, wm8903->dcs_cache[i]);
snd_soc_component_write(component, WM8903_DC_SERVO_4 + i,
wm8903->dcs_cache[i] & 0xff);
} else {
dev_dbg(component->dev,
"Calibrate DC servo %d\n", 3 - i);
dcs_mode = WM8903_DCS_MODE_START_STOP;
}
}
/* Don't trust the cache for analogue */
if (wm8903->class_w_users)
dcs_mode = WM8903_DCS_MODE_START_STOP;
snd_soc_component_update_bits(component, WM8903_DC_SERVO_2,
WM8903_DCS_MODE_MASK, dcs_mode);
snd_soc_component_update_bits(component, WM8903_DC_SERVO_0,
WM8903_DCS_ENA_MASK, wm8903->dcs_pending);
switch (dcs_mode) {
case WM8903_DCS_MODE_WRITE_STOP:
break;
case WM8903_DCS_MODE_START_STOP:
msleep(270);
/* Cache the measured offsets for digital */
if (wm8903->class_w_users)
break;
for (i = 0; i < ARRAY_SIZE(wm8903->dcs_cache); i++) {
if (!(wm8903->dcs_pending & (1 << i)))
continue;
val = snd_soc_component_read(component,
WM8903_DC_SERVO_READBACK_1 + i);
dev_dbg(component->dev, "DC servo %d: %x\n",
3 - i, val);
wm8903->dcs_cache[i] = val;
}
break;
default:
pr_warn("DCS mode %d delay not set\n", dcs_mode);
break;
}
wm8903->dcs_pending = 0;
}
}
/*
* When used with DAC outputs only the WM8903 charge pump supports
* operation in class W mode, providing very low power consumption
* when used with digital sources. Enable and disable this mode
* automatically depending on the mixer configuration.
*
* All the relevant controls are simple switches.
*/
static int wm8903_class_w_put(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct snd_soc_component *component = snd_soc_dapm_kcontrol_component(kcontrol);
struct wm8903_priv *wm8903 = snd_soc_component_get_drvdata(component);
u16 reg;
int ret;
reg = snd_soc_component_read(component, WM8903_CLASS_W_0);
/* Turn it off if we're about to enable bypass */
if (ucontrol->value.integer.value[0]) {
if (wm8903->class_w_users == 0) {
dev_dbg(component->dev, "Disabling Class W\n");
snd_soc_component_write(component, WM8903_CLASS_W_0, reg &
~(WM8903_CP_DYN_FREQ | WM8903_CP_DYN_V));
}
wm8903->class_w_users++;
}
/* Implement the change */
ret = snd_soc_dapm_put_volsw(kcontrol, ucontrol);
/* If we've just disabled the last bypass path turn Class W on */
if (!ucontrol->value.integer.value[0]) {
if (wm8903->class_w_users == 1) {
dev_dbg(component->dev, "Enabling Class W\n");
snd_soc_component_write(component, WM8903_CLASS_W_0, reg |
WM8903_CP_DYN_FREQ | WM8903_CP_DYN_V);
}
wm8903->class_w_users--;
}
dev_dbg(component->dev, "Bypass use count now %d\n",
wm8903->class_w_users);
return ret;
}
#define SOC_DAPM_SINGLE_W(xname, reg, shift, max, invert) \
SOC_SINGLE_EXT(xname, reg, shift, max, invert, \
snd_soc_dapm_get_volsw, wm8903_class_w_put)
static int wm8903_deemph[] = { 0, 32000, 44100, 48000 };
static int wm8903_set_deemph(struct snd_soc_component *component)
{
struct wm8903_priv *wm8903 = snd_soc_component_get_drvdata(component);
int val, i, best;
/* If we're using deemphasis select the nearest available sample
* rate.
*/
if (wm8903->deemph) {
best = 1;
for (i = 2; i < ARRAY_SIZE(wm8903_deemph); i++) {
if (abs(wm8903_deemph[i] - wm8903->fs) <
abs(wm8903_deemph[best] - wm8903->fs))
best = i;
}
val = best << WM8903_DEEMPH_SHIFT;
} else {
best = 0;
val = 0;
}
dev_dbg(component->dev, "Set deemphasis %d (%dHz)\n",
best, wm8903_deemph[best]);
return snd_soc_component_update_bits(component, WM8903_DAC_DIGITAL_1,
WM8903_DEEMPH_MASK, val);
}
static int wm8903_get_deemph(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol);
struct wm8903_priv *wm8903 = snd_soc_component_get_drvdata(component);
ucontrol->value.integer.value[0] = wm8903->deemph;
return 0;
}
static int wm8903_put_deemph(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol);
struct wm8903_priv *wm8903 = snd_soc_component_get_drvdata(component);
unsigned int deemph = ucontrol->value.integer.value[0];
int ret = 0;
if (deemph > 1)
return -EINVAL;
mutex_lock(&wm8903->lock);
if (wm8903->deemph != deemph) {
wm8903->deemph = deemph;
wm8903_set_deemph(component);
ret = 1;
}
mutex_unlock(&wm8903->lock);
return ret;
}
/* ALSA can only do steps of .01dB */
static const DECLARE_TLV_DB_SCALE(digital_tlv, -7200, 75, 1);
static const DECLARE_TLV_DB_SCALE(dac_boost_tlv, 0, 600, 0);
static const DECLARE_TLV_DB_SCALE(digital_sidetone_tlv, -3600, 300, 0);
static const DECLARE_TLV_DB_SCALE(out_tlv, -5700, 100, 0);
static const DECLARE_TLV_DB_SCALE(drc_tlv_thresh, 0, 75, 0);
static const DECLARE_TLV_DB_SCALE(drc_tlv_amp, -2250, 75, 0);
static const DECLARE_TLV_DB_SCALE(drc_tlv_min, 0, 600, 0);
static const DECLARE_TLV_DB_SCALE(drc_tlv_max, 1200, 600, 0);
static const DECLARE_TLV_DB_SCALE(drc_tlv_startup, -300, 50, 0);
static const char *hpf_mode_text[] = {
"Hi-fi", "Voice 1", "Voice 2", "Voice 3"
};
static SOC_ENUM_SINGLE_DECL(hpf_mode,
WM8903_ADC_DIGITAL_0, 5, hpf_mode_text);
static const char *osr_text[] = {
"Low power", "High performance"
};
static SOC_ENUM_SINGLE_DECL(adc_osr,
WM8903_ANALOGUE_ADC_0, 0, osr_text);
static SOC_ENUM_SINGLE_DECL(dac_osr,
WM8903_DAC_DIGITAL_1, 0, osr_text);
static const char *drc_slope_text[] = {
"1", "1/2", "1/4", "1/8", "1/16", "0"
};
static SOC_ENUM_SINGLE_DECL(drc_slope_r0,
WM8903_DRC_2, 3, drc_slope_text);
static SOC_ENUM_SINGLE_DECL(drc_slope_r1,
WM8903_DRC_2, 0, drc_slope_text);
static const char *drc_attack_text[] = {
"instantaneous",
"363us", "762us", "1.45ms", "2.9ms", "5.8ms", "11.6ms", "23.2ms",
"46.4ms", "92.8ms", "185.6ms"
};
static SOC_ENUM_SINGLE_DECL(drc_attack,
WM8903_DRC_1, 12, drc_attack_text);
static const char *drc_decay_text[] = {
"186ms", "372ms", "743ms", "1.49s", "2.97s", "5.94s", "11.89s",
"23.87s", "47.56s"
};
static SOC_ENUM_SINGLE_DECL(drc_decay,
WM8903_DRC_1, 8, drc_decay_text);
static const char *drc_ff_delay_text[] = {
"5 samples", "9 samples"
};
static SOC_ENUM_SINGLE_DECL(drc_ff_delay,
WM8903_DRC_0, 5, drc_ff_delay_text);
static const char *drc_qr_decay_text[] = {
"0.725ms", "1.45ms", "5.8ms"
};
static SOC_ENUM_SINGLE_DECL(drc_qr_decay,
WM8903_DRC_1, 4, drc_qr_decay_text);
static const char *drc_smoothing_text[] = {
"Low", "Medium", "High"
};
static SOC_ENUM_SINGLE_DECL(drc_smoothing,
WM8903_DRC_0, 11, drc_smoothing_text);
static const char *soft_mute_text[] = {
"Fast (fs/2)", "Slow (fs/32)"
};
static SOC_ENUM_SINGLE_DECL(soft_mute,
WM8903_DAC_DIGITAL_1, 10, soft_mute_text);
static const char *mute_mode_text[] = {
"Hard", "Soft"
};
static SOC_ENUM_SINGLE_DECL(mute_mode,
WM8903_DAC_DIGITAL_1, 9, mute_mode_text);
static const char *companding_text[] = {
"ulaw", "alaw"
};
static SOC_ENUM_SINGLE_DECL(dac_companding,
WM8903_AUDIO_INTERFACE_0, 0, companding_text);
static SOC_ENUM_SINGLE_DECL(adc_companding,
WM8903_AUDIO_INTERFACE_0, 2, companding_text);
static const char *input_mode_text[] = {
"Single-Ended", "Differential Line", "Differential Mic"
};
static SOC_ENUM_SINGLE_DECL(linput_mode_enum,
WM8903_ANALOGUE_LEFT_INPUT_1, 0, input_mode_text);
static SOC_ENUM_SINGLE_DECL(rinput_mode_enum,
WM8903_ANALOGUE_RIGHT_INPUT_1, 0, input_mode_text);
static const char *linput_mux_text[] = {
"IN1L", "IN2L", "IN3L"
};
static SOC_ENUM_SINGLE_DECL(linput_enum,
WM8903_ANALOGUE_LEFT_INPUT_1, 2, linput_mux_text);
static SOC_ENUM_SINGLE_DECL(linput_inv_enum,
WM8903_ANALOGUE_LEFT_INPUT_1, 4, linput_mux_text);
static const char *rinput_mux_text[] = {
"IN1R", "IN2R", "IN3R"
};
static SOC_ENUM_SINGLE_DECL(rinput_enum,
WM8903_ANALOGUE_RIGHT_INPUT_1, 2, rinput_mux_text);
static SOC_ENUM_SINGLE_DECL(rinput_inv_enum,
WM8903_ANALOGUE_RIGHT_INPUT_1, 4, rinput_mux_text);
static const char *sidetone_text[] = {
"None", "Left", "Right"
};
static SOC_ENUM_SINGLE_DECL(lsidetone_enum,
WM8903_DAC_DIGITAL_0, 2, sidetone_text);
static SOC_ENUM_SINGLE_DECL(rsidetone_enum,
WM8903_DAC_DIGITAL_0, 0, sidetone_text);
static const char *adcinput_text[] = {
"ADC", "DMIC"
};
static SOC_ENUM_SINGLE_DECL(adcinput_enum,
WM8903_CLOCK_RATE_TEST_4, 9, adcinput_text);
static const char *aif_text[] = {
"Left", "Right"
};
static SOC_ENUM_SINGLE_DECL(lcapture_enum,
WM8903_AUDIO_INTERFACE_0, 7, aif_text);
static SOC_ENUM_SINGLE_DECL(rcapture_enum,
WM8903_AUDIO_INTERFACE_0, 6, aif_text);
static SOC_ENUM_SINGLE_DECL(lplay_enum,
WM8903_AUDIO_INTERFACE_0, 5, aif_text);
static SOC_ENUM_SINGLE_DECL(rplay_enum,
WM8903_AUDIO_INTERFACE_0, 4, aif_text);
static const struct snd_kcontrol_new wm8903_snd_controls[] = {
/* Input PGAs - No TLV since the scale depends on PGA mode */
SOC_SINGLE("Left Input PGA Switch", WM8903_ANALOGUE_LEFT_INPUT_0,
7, 1, 1),
SOC_SINGLE("Left Input PGA Volume", WM8903_ANALOGUE_LEFT_INPUT_0,
0, 31, 0),
SOC_SINGLE("Left Input PGA Common Mode Switch", WM8903_ANALOGUE_LEFT_INPUT_1,
6, 1, 0),
SOC_SINGLE("Right Input PGA Switch", WM8903_ANALOGUE_RIGHT_INPUT_0,
7, 1, 1),
SOC_SINGLE("Right Input PGA Volume", WM8903_ANALOGUE_RIGHT_INPUT_0,
0, 31, 0),
SOC_SINGLE("Right Input PGA Common Mode Switch", WM8903_ANALOGUE_RIGHT_INPUT_1,
6, 1, 0),
/* ADCs */
SOC_ENUM("ADC OSR", adc_osr),
SOC_SINGLE("HPF Switch", WM8903_ADC_DIGITAL_0, 4, 1, 0),
SOC_ENUM("HPF Mode", hpf_mode),
SOC_SINGLE("DRC Switch", WM8903_DRC_0, 15, 1, 0),
SOC_ENUM("DRC Compressor Slope R0", drc_slope_r0),
SOC_ENUM("DRC Compressor Slope R1", drc_slope_r1),
SOC_SINGLE_TLV("DRC Compressor Threshold Volume", WM8903_DRC_3, 5, 124, 1,
drc_tlv_thresh),
SOC_SINGLE_TLV("DRC Volume", WM8903_DRC_3, 0, 30, 1, drc_tlv_amp),
SOC_SINGLE_TLV("DRC Minimum Gain Volume", WM8903_DRC_1, 2, 3, 1, drc_tlv_min),
SOC_SINGLE_TLV("DRC Maximum Gain Volume", WM8903_DRC_1, 0, 3, 0, drc_tlv_max),
SOC_ENUM("DRC Attack Rate", drc_attack),
SOC_ENUM("DRC Decay Rate", drc_decay),
SOC_ENUM("DRC FF Delay", drc_ff_delay),
SOC_SINGLE("DRC Anticlip Switch", WM8903_DRC_0, 1, 1, 0),
SOC_SINGLE("DRC QR Switch", WM8903_DRC_0, 2, 1, 0),
SOC_SINGLE_TLV("DRC QR Threshold Volume", WM8903_DRC_0, 6, 3, 0, drc_tlv_max),
SOC_ENUM("DRC QR Decay Rate", drc_qr_decay),
SOC_SINGLE("DRC Smoothing Switch", WM8903_DRC_0, 3, 1, 0),
SOC_SINGLE("DRC Smoothing Hysteresis Switch", WM8903_DRC_0, 0, 1, 0),
SOC_ENUM("DRC Smoothing Threshold", drc_smoothing),
SOC_SINGLE_TLV("DRC Startup Volume", WM8903_DRC_0, 6, 18, 0, drc_tlv_startup),
SOC_DOUBLE_R_TLV("Digital Capture Volume", WM8903_ADC_DIGITAL_VOLUME_LEFT,
WM8903_ADC_DIGITAL_VOLUME_RIGHT, 1, 120, 0, digital_tlv),
SOC_ENUM("ADC Companding Mode", adc_companding),
SOC_SINGLE("ADC Companding Switch", WM8903_AUDIO_INTERFACE_0, 3, 1, 0),
SOC_DOUBLE_TLV("Digital Sidetone Volume", WM8903_DAC_DIGITAL_0, 4, 8,
12, 0, digital_sidetone_tlv),
/* DAC */
SOC_ENUM("DAC OSR", dac_osr),
SOC_DOUBLE_R_TLV("Digital Playback Volume", WM8903_DAC_DIGITAL_VOLUME_LEFT,
WM8903_DAC_DIGITAL_VOLUME_RIGHT, 1, 120, 0, digital_tlv),
SOC_ENUM("DAC Soft Mute Rate", soft_mute),
SOC_ENUM("DAC Mute Mode", mute_mode),
SOC_SINGLE("DAC Mono Switch", WM8903_DAC_DIGITAL_1, 12, 1, 0),
SOC_ENUM("DAC Companding Mode", dac_companding),
SOC_SINGLE("DAC Companding Switch", WM8903_AUDIO_INTERFACE_0, 1, 1, 0),
SOC_SINGLE_TLV("DAC Boost Volume", WM8903_AUDIO_INTERFACE_0, 9, 3, 0,
dac_boost_tlv),
SOC_SINGLE_BOOL_EXT("Playback Deemphasis Switch", 0,
wm8903_get_deemph, wm8903_put_deemph),
/* Headphones */
SOC_DOUBLE_R("Headphone Switch",
WM8903_ANALOGUE_OUT1_LEFT, WM8903_ANALOGUE_OUT1_RIGHT,
8, 1, 1),
SOC_DOUBLE_R("Headphone ZC Switch",
WM8903_ANALOGUE_OUT1_LEFT, WM8903_ANALOGUE_OUT1_RIGHT,
6, 1, 0),
SOC_DOUBLE_R_TLV("Headphone Volume",
WM8903_ANALOGUE_OUT1_LEFT, WM8903_ANALOGUE_OUT1_RIGHT,
0, 63, 0, out_tlv),
/* Line out */
SOC_DOUBLE_R("Line Out Switch",
WM8903_ANALOGUE_OUT2_LEFT, WM8903_ANALOGUE_OUT2_RIGHT,
8, 1, 1),
SOC_DOUBLE_R("Line Out ZC Switch",
WM8903_ANALOGUE_OUT2_LEFT, WM8903_ANALOGUE_OUT2_RIGHT,
6, 1, 0),
SOC_DOUBLE_R_TLV("Line Out Volume",
WM8903_ANALOGUE_OUT2_LEFT, WM8903_ANALOGUE_OUT2_RIGHT,
0, 63, 0, out_tlv),
/* Speaker */
SOC_DOUBLE_R("Speaker Switch",
WM8903_ANALOGUE_OUT3_LEFT, WM8903_ANALOGUE_OUT3_RIGHT, 8, 1, 1),
SOC_DOUBLE_R("Speaker ZC Switch",
WM8903_ANALOGUE_OUT3_LEFT, WM8903_ANALOGUE_OUT3_RIGHT, 6, 1, 0),
SOC_DOUBLE_R_TLV("Speaker Volume",
WM8903_ANALOGUE_OUT3_LEFT, WM8903_ANALOGUE_OUT3_RIGHT,
0, 63, 0, out_tlv),
};
static const struct snd_kcontrol_new linput_mode_mux =
SOC_DAPM_ENUM("Left Input Mode Mux", linput_mode_enum);
static const struct snd_kcontrol_new rinput_mode_mux =
SOC_DAPM_ENUM("Right Input Mode Mux", rinput_mode_enum);
static const struct snd_kcontrol_new linput_mux =
SOC_DAPM_ENUM("Left Input Mux", linput_enum);
static const struct snd_kcontrol_new linput_inv_mux =
SOC_DAPM_ENUM("Left Inverting Input Mux", linput_inv_enum);
static const struct snd_kcontrol_new rinput_mux =
SOC_DAPM_ENUM("Right Input Mux", rinput_enum);
static const struct snd_kcontrol_new rinput_inv_mux =
SOC_DAPM_ENUM("Right Inverting Input Mux", rinput_inv_enum);
static const struct snd_kcontrol_new lsidetone_mux =
SOC_DAPM_ENUM("DACL Sidetone Mux", lsidetone_enum);
static const struct snd_kcontrol_new rsidetone_mux =
SOC_DAPM_ENUM("DACR Sidetone Mux", rsidetone_enum);
static const struct snd_kcontrol_new adcinput_mux =
SOC_DAPM_ENUM("ADC Input", adcinput_enum);
static const struct snd_kcontrol_new lcapture_mux =
SOC_DAPM_ENUM("Left Capture Mux", lcapture_enum);
static const struct snd_kcontrol_new rcapture_mux =
SOC_DAPM_ENUM("Right Capture Mux", rcapture_enum);
static const struct snd_kcontrol_new lplay_mux =
SOC_DAPM_ENUM("Left Playback Mux", lplay_enum);
static const struct snd_kcontrol_new rplay_mux =
SOC_DAPM_ENUM("Right Playback Mux", rplay_enum);
static const struct snd_kcontrol_new left_output_mixer[] = {
SOC_DAPM_SINGLE("DACL Switch", WM8903_ANALOGUE_LEFT_MIX_0, 3, 1, 0),
SOC_DAPM_SINGLE("DACR Switch", WM8903_ANALOGUE_LEFT_MIX_0, 2, 1, 0),
SOC_DAPM_SINGLE_W("Left Bypass Switch", WM8903_ANALOGUE_LEFT_MIX_0, 1, 1, 0),
SOC_DAPM_SINGLE_W("Right Bypass Switch", WM8903_ANALOGUE_LEFT_MIX_0, 0, 1, 0),
};
static const struct snd_kcontrol_new right_output_mixer[] = {
SOC_DAPM_SINGLE("DACL Switch", WM8903_ANALOGUE_RIGHT_MIX_0, 3, 1, 0),
SOC_DAPM_SINGLE("DACR Switch", WM8903_ANALOGUE_RIGHT_MIX_0, 2, 1, 0),
SOC_DAPM_SINGLE_W("Left Bypass Switch", WM8903_ANALOGUE_RIGHT_MIX_0, 1, 1, 0),
SOC_DAPM_SINGLE_W("Right Bypass Switch", WM8903_ANALOGUE_RIGHT_MIX_0, 0, 1, 0),
};
static const struct snd_kcontrol_new left_speaker_mixer[] = {
SOC_DAPM_SINGLE("DACL Switch", WM8903_ANALOGUE_SPK_MIX_LEFT_0, 3, 1, 0),
SOC_DAPM_SINGLE("DACR Switch", WM8903_ANALOGUE_SPK_MIX_LEFT_0, 2, 1, 0),
SOC_DAPM_SINGLE("Left Bypass Switch", WM8903_ANALOGUE_SPK_MIX_LEFT_0, 1, 1, 0),
SOC_DAPM_SINGLE("Right Bypass Switch", WM8903_ANALOGUE_SPK_MIX_LEFT_0,
0, 1, 0),
};
static const struct snd_kcontrol_new right_speaker_mixer[] = {
SOC_DAPM_SINGLE("DACL Switch", WM8903_ANALOGUE_SPK_MIX_RIGHT_0, 3, 1, 0),
SOC_DAPM_SINGLE("DACR Switch", WM8903_ANALOGUE_SPK_MIX_RIGHT_0, 2, 1, 0),
SOC_DAPM_SINGLE("Left Bypass Switch", WM8903_ANALOGUE_SPK_MIX_RIGHT_0,
1, 1, 0),
SOC_DAPM_SINGLE("Right Bypass Switch", WM8903_ANALOGUE_SPK_MIX_RIGHT_0,
0, 1, 0),
};
static const struct snd_soc_dapm_widget wm8903_dapm_widgets[] = {
SND_SOC_DAPM_INPUT("IN1L"),
SND_SOC_DAPM_INPUT("IN1R"),
SND_SOC_DAPM_INPUT("IN2L"),
SND_SOC_DAPM_INPUT("IN2R"),
SND_SOC_DAPM_INPUT("IN3L"),
SND_SOC_DAPM_INPUT("IN3R"),
SND_SOC_DAPM_INPUT("DMICDAT"),
SND_SOC_DAPM_OUTPUT("HPOUTL"),
SND_SOC_DAPM_OUTPUT("HPOUTR"),
SND_SOC_DAPM_OUTPUT("LINEOUTL"),
SND_SOC_DAPM_OUTPUT("LINEOUTR"),
SND_SOC_DAPM_OUTPUT("LOP"),
SND_SOC_DAPM_OUTPUT("LON"),
SND_SOC_DAPM_OUTPUT("ROP"),
SND_SOC_DAPM_OUTPUT("RON"),
SND_SOC_DAPM_SUPPLY("MICBIAS", WM8903_MIC_BIAS_CONTROL_0, 0, 0, NULL, 0),
SND_SOC_DAPM_MUX("Left Input Mux", SND_SOC_NOPM, 0, 0, &linput_mux),
SND_SOC_DAPM_MUX("Left Input Inverting Mux", SND_SOC_NOPM, 0, 0,
&linput_inv_mux),
SND_SOC_DAPM_MUX("Left Input Mode Mux", SND_SOC_NOPM, 0, 0, &linput_mode_mux),
SND_SOC_DAPM_MUX("Right Input Mux", SND_SOC_NOPM, 0, 0, &rinput_mux),
SND_SOC_DAPM_MUX("Right Input Inverting Mux", SND_SOC_NOPM, 0, 0,
&rinput_inv_mux),
SND_SOC_DAPM_MUX("Right Input Mode Mux", SND_SOC_NOPM, 0, 0, &rinput_mode_mux),
SND_SOC_DAPM_PGA("Left Input PGA", WM8903_POWER_MANAGEMENT_0, 1, 0, NULL, 0),
SND_SOC_DAPM_PGA("Right Input PGA", WM8903_POWER_MANAGEMENT_0, 0, 0, NULL, 0),
SND_SOC_DAPM_MUX("Left ADC Input", SND_SOC_NOPM, 0, 0, &adcinput_mux),
SND_SOC_DAPM_MUX("Right ADC Input", SND_SOC_NOPM, 0, 0, &adcinput_mux),
SND_SOC_DAPM_ADC("ADCL", NULL, WM8903_POWER_MANAGEMENT_6, 1, 0),
SND_SOC_DAPM_ADC("ADCR", NULL, WM8903_POWER_MANAGEMENT_6, 0, 0),
SND_SOC_DAPM_MUX("Left Capture Mux", SND_SOC_NOPM, 0, 0, &lcapture_mux),
SND_SOC_DAPM_MUX("Right Capture Mux", SND_SOC_NOPM, 0, 0, &rcapture_mux),
SND_SOC_DAPM_AIF_OUT("AIFTXL", "Left HiFi Capture", 0, SND_SOC_NOPM, 0, 0),
SND_SOC_DAPM_AIF_OUT("AIFTXR", "Right HiFi Capture", 0, SND_SOC_NOPM, 0, 0),
SND_SOC_DAPM_MUX("DACL Sidetone", SND_SOC_NOPM, 0, 0, &lsidetone_mux),
SND_SOC_DAPM_MUX("DACR Sidetone", SND_SOC_NOPM, 0, 0, &rsidetone_mux),
SND_SOC_DAPM_AIF_IN("AIFRXL", "Left Playback", 0, SND_SOC_NOPM, 0, 0),
SND_SOC_DAPM_AIF_IN("AIFRXR", "Right Playback", 0, SND_SOC_NOPM, 0, 0),
SND_SOC_DAPM_MUX("Left Playback Mux", SND_SOC_NOPM, 0, 0, &lplay_mux),
SND_SOC_DAPM_MUX("Right Playback Mux", SND_SOC_NOPM, 0, 0, &rplay_mux),
SND_SOC_DAPM_DAC("DACL", NULL, WM8903_POWER_MANAGEMENT_6, 3, 0),
SND_SOC_DAPM_DAC("DACR", NULL, WM8903_POWER_MANAGEMENT_6, 2, 0),
SND_SOC_DAPM_MIXER("Left Output Mixer", WM8903_POWER_MANAGEMENT_1, 1, 0,
left_output_mixer, ARRAY_SIZE(left_output_mixer)),
SND_SOC_DAPM_MIXER("Right Output Mixer", WM8903_POWER_MANAGEMENT_1, 0, 0,
right_output_mixer, ARRAY_SIZE(right_output_mixer)),
SND_SOC_DAPM_MIXER("Left Speaker Mixer", WM8903_POWER_MANAGEMENT_4, 1, 0,
left_speaker_mixer, ARRAY_SIZE(left_speaker_mixer)),
SND_SOC_DAPM_MIXER("Right Speaker Mixer", WM8903_POWER_MANAGEMENT_4, 0, 0,
right_speaker_mixer, ARRAY_SIZE(right_speaker_mixer)),
SND_SOC_DAPM_PGA_S("Left Headphone Output PGA", 0, WM8903_POWER_MANAGEMENT_2,
1, 0, NULL, 0),
SND_SOC_DAPM_PGA_S("Right Headphone Output PGA", 0, WM8903_POWER_MANAGEMENT_2,
0, 0, NULL, 0),
SND_SOC_DAPM_PGA_S("Left Line Output PGA", 0, WM8903_POWER_MANAGEMENT_3, 1, 0,
NULL, 0),
SND_SOC_DAPM_PGA_S("Right Line Output PGA", 0, WM8903_POWER_MANAGEMENT_3, 0, 0,
NULL, 0),
SND_SOC_DAPM_PGA_S("HPL_RMV_SHORT", 4, WM8903_ANALOGUE_HP_0, 7, 0, NULL, 0),
SND_SOC_DAPM_PGA_S("HPL_ENA_OUTP", 3, WM8903_ANALOGUE_HP_0, 6, 0, NULL, 0),
SND_SOC_DAPM_PGA_S("HPL_ENA_DLY", 2, WM8903_ANALOGUE_HP_0, 5, 0, NULL, 0),
SND_SOC_DAPM_PGA_S("HPL_ENA", 1, WM8903_ANALOGUE_HP_0, 4, 0, NULL, 0),
SND_SOC_DAPM_PGA_S("HPR_RMV_SHORT", 4, WM8903_ANALOGUE_HP_0, 3, 0, NULL, 0),
SND_SOC_DAPM_PGA_S("HPR_ENA_OUTP", 3, WM8903_ANALOGUE_HP_0, 2, 0, NULL, 0),
SND_SOC_DAPM_PGA_S("HPR_ENA_DLY", 2, WM8903_ANALOGUE_HP_0, 1, 0, NULL, 0),
SND_SOC_DAPM_PGA_S("HPR_ENA", 1, WM8903_ANALOGUE_HP_0, 0, 0, NULL, 0),
SND_SOC_DAPM_PGA_S("LINEOUTL_RMV_SHORT", 4, WM8903_ANALOGUE_LINEOUT_0, 7, 0,
NULL, 0),
SND_SOC_DAPM_PGA_S("LINEOUTL_ENA_OUTP", 3, WM8903_ANALOGUE_LINEOUT_0, 6, 0,
NULL, 0),
SND_SOC_DAPM_PGA_S("LINEOUTL_ENA_DLY", 2, WM8903_ANALOGUE_LINEOUT_0, 5, 0,
NULL, 0),
SND_SOC_DAPM_PGA_S("LINEOUTL_ENA", 1, WM8903_ANALOGUE_LINEOUT_0, 4, 0,
NULL, 0),
SND_SOC_DAPM_PGA_S("LINEOUTR_RMV_SHORT", 4, WM8903_ANALOGUE_LINEOUT_0, 3, 0,
NULL, 0),
SND_SOC_DAPM_PGA_S("LINEOUTR_ENA_OUTP", 3, WM8903_ANALOGUE_LINEOUT_0, 2, 0,
NULL, 0),
SND_SOC_DAPM_PGA_S("LINEOUTR_ENA_DLY", 2, WM8903_ANALOGUE_LINEOUT_0, 1, 0,
NULL, 0),
SND_SOC_DAPM_PGA_S("LINEOUTR_ENA", 1, WM8903_ANALOGUE_LINEOUT_0, 0, 0,
NULL, 0),
SND_SOC_DAPM_SUPPLY("DCS Master", WM8903_DC_SERVO_0, 4, 0, NULL, 0),
SND_SOC_DAPM_PGA_S("HPL_DCS", 3, SND_SOC_NOPM, 3, 0, wm8903_dcs_event,
SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD),
SND_SOC_DAPM_PGA_S("HPR_DCS", 3, SND_SOC_NOPM, 2, 0, wm8903_dcs_event,
SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD),
SND_SOC_DAPM_PGA_S("LINEOUTL_DCS", 3, SND_SOC_NOPM, 1, 0, wm8903_dcs_event,
SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD),
SND_SOC_DAPM_PGA_S("LINEOUTR_DCS", 3, SND_SOC_NOPM, 0, 0, wm8903_dcs_event,
SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD),
SND_SOC_DAPM_PGA("Left Speaker PGA", WM8903_POWER_MANAGEMENT_5, 1, 0,
NULL, 0),
SND_SOC_DAPM_PGA("Right Speaker PGA", WM8903_POWER_MANAGEMENT_5, 0, 0,
NULL, 0),
SND_SOC_DAPM_SUPPLY("Charge Pump", WM8903_CHARGE_PUMP_0, 0, 0,
wm8903_cp_event, SND_SOC_DAPM_POST_PMU),
SND_SOC_DAPM_SUPPLY("CLK_DSP", WM8903_CLOCK_RATES_2, 1, 0, NULL, 0),
SND_SOC_DAPM_SUPPLY("CLK_SYS", WM8903_CLOCK_RATES_2, 2, 0, NULL, 0),
};
static const struct snd_soc_dapm_route wm8903_intercon[] = {
{ "CLK_DSP", NULL, "CLK_SYS" },
{ "MICBIAS", NULL, "CLK_SYS" },
{ "HPL_DCS", NULL, "CLK_SYS" },
{ "HPR_DCS", NULL, "CLK_SYS" },
{ "LINEOUTL_DCS", NULL, "CLK_SYS" },
{ "LINEOUTR_DCS", NULL, "CLK_SYS" },
{ "Left Input Mux", "IN1L", "IN1L" },
{ "Left Input Mux", "IN2L", "IN2L" },
{ "Left Input Mux", "IN3L", "IN3L" },
{ "Left Input Inverting Mux", "IN1L", "IN1L" },
{ "Left Input Inverting Mux", "IN2L", "IN2L" },
{ "Left Input Inverting Mux", "IN3L", "IN3L" },
{ "Right Input Mux", "IN1R", "IN1R" },
{ "Right Input Mux", "IN2R", "IN2R" },
{ "Right Input Mux", "IN3R", "IN3R" },
{ "Right Input Inverting Mux", "IN1R", "IN1R" },
{ "Right Input Inverting Mux", "IN2R", "IN2R" },
{ "Right Input Inverting Mux", "IN3R", "IN3R" },
{ "Left Input Mode Mux", "Single-Ended", "Left Input Inverting Mux" },
{ "Left Input Mode Mux", "Differential Line",
"Left Input Mux" },
{ "Left Input Mode Mux", "Differential Line",
"Left Input Inverting Mux" },
{ "Left Input Mode Mux", "Differential Mic",
"Left Input Mux" },
{ "Left Input Mode Mux", "Differential Mic",
"Left Input Inverting Mux" },
{ "Right Input Mode Mux", "Single-Ended",
"Right Input Inverting Mux" },
{ "Right Input Mode Mux", "Differential Line",
"Right Input Mux" },
{ "Right Input Mode Mux", "Differential Line",
"Right Input Inverting Mux" },
{ "Right Input Mode Mux", "Differential Mic",
"Right Input Mux" },
{ "Right Input Mode Mux", "Differential Mic",
"Right Input Inverting Mux" },
{ "Left Input PGA", NULL, "Left Input Mode Mux" },
{ "Right Input PGA", NULL, "Right Input Mode Mux" },
{ "Left ADC Input", "ADC", "Left Input PGA" },
{ "Left ADC Input", "DMIC", "DMICDAT" },
{ "Right ADC Input", "ADC", "Right Input PGA" },
{ "Right ADC Input", "DMIC", "DMICDAT" },
{ "Left Capture Mux", "Left", "ADCL" },
{ "Left Capture Mux", "Right", "ADCR" },
{ "Right Capture Mux", "Left", "ADCL" },
{ "Right Capture Mux", "Right", "ADCR" },
{ "AIFTXL", NULL, "Left Capture Mux" },
{ "AIFTXR", NULL, "Right Capture Mux" },
{ "ADCL", NULL, "Left ADC Input" },
{ "ADCL", NULL, "CLK_DSP" },
{ "ADCR", NULL, "Right ADC Input" },
{ "ADCR", NULL, "CLK_DSP" },
{ "Left Playback Mux", "Left", "AIFRXL" },
{ "Left Playback Mux", "Right", "AIFRXR" },
{ "Right Playback Mux", "Left", "AIFRXL" },
{ "Right Playback Mux", "Right", "AIFRXR" },
{ "DACL Sidetone", "Left", "ADCL" },
{ "DACL Sidetone", "Right", "ADCR" },
{ "DACR Sidetone", "Left", "ADCL" },
{ "DACR Sidetone", "Right", "ADCR" },
{ "DACL", NULL, "Left Playback Mux" },
{ "DACL", NULL, "DACL Sidetone" },
{ "DACL", NULL, "CLK_DSP" },
{ "DACR", NULL, "Right Playback Mux" },
{ "DACR", NULL, "DACR Sidetone" },
{ "DACR", NULL, "CLK_DSP" },
{ "Left Output Mixer", "Left Bypass Switch", "Left Input PGA" },
{ "Left Output Mixer", "Right Bypass Switch", "Right Input PGA" },
{ "Left Output Mixer", "DACL Switch", "DACL" },
{ "Left Output Mixer", "DACR Switch", "DACR" },
{ "Right Output Mixer", "Left Bypass Switch", "Left Input PGA" },
{ "Right Output Mixer", "Right Bypass Switch", "Right Input PGA" },
{ "Right Output Mixer", "DACL Switch", "DACL" },
{ "Right Output Mixer", "DACR Switch", "DACR" },
{ "Left Speaker Mixer", "Left Bypass Switch", "Left Input PGA" },
{ "Left Speaker Mixer", "Right Bypass Switch", "Right Input PGA" },
{ "Left Speaker Mixer", "DACL Switch", "DACL" },
{ "Left Speaker Mixer", "DACR Switch", "DACR" },
{ "Right Speaker Mixer", "Left Bypass Switch", "Left Input PGA" },
{ "Right Speaker Mixer", "Right Bypass Switch", "Right Input PGA" },
{ "Right Speaker Mixer", "DACL Switch", "DACL" },
{ "Right Speaker Mixer", "DACR Switch", "DACR" },
{ "Left Line Output PGA", NULL, "Left Output Mixer" },
{ "Right Line Output PGA", NULL, "Right Output Mixer" },
{ "Left Headphone Output PGA", NULL, "Left Output Mixer" },
{ "Right Headphone Output PGA", NULL, "Right Output Mixer" },
{ "Left Speaker PGA", NULL, "Left Speaker Mixer" },
{ "Right Speaker PGA", NULL, "Right Speaker Mixer" },
{ "HPL_ENA", NULL, "Left Headphone Output PGA" },
{ "HPR_ENA", NULL, "Right Headphone Output PGA" },
{ "HPL_ENA_DLY", NULL, "HPL_ENA" },
{ "HPR_ENA_DLY", NULL, "HPR_ENA" },
{ "LINEOUTL_ENA", NULL, "Left Line Output PGA" },
{ "LINEOUTR_ENA", NULL, "Right Line Output PGA" },
{ "LINEOUTL_ENA_DLY", NULL, "LINEOUTL_ENA" },
{ "LINEOUTR_ENA_DLY", NULL, "LINEOUTR_ENA" },
{ "HPL_DCS", NULL, "DCS Master" },
{ "HPR_DCS", NULL, "DCS Master" },
{ "LINEOUTL_DCS", NULL, "DCS Master" },
{ "LINEOUTR_DCS", NULL, "DCS Master" },
{ "HPL_DCS", NULL, "HPL_ENA_DLY" },
{ "HPR_DCS", NULL, "HPR_ENA_DLY" },
{ "LINEOUTL_DCS", NULL, "LINEOUTL_ENA_DLY" },
{ "LINEOUTR_DCS", NULL, "LINEOUTR_ENA_DLY" },
{ "HPL_ENA_OUTP", NULL, "HPL_DCS" },
{ "HPR_ENA_OUTP", NULL, "HPR_DCS" },
{ "LINEOUTL_ENA_OUTP", NULL, "LINEOUTL_DCS" },
{ "LINEOUTR_ENA_OUTP", NULL, "LINEOUTR_DCS" },
{ "HPL_RMV_SHORT", NULL, "HPL_ENA_OUTP" },
{ "HPR_RMV_SHORT", NULL, "HPR_ENA_OUTP" },
{ "LINEOUTL_RMV_SHORT", NULL, "LINEOUTL_ENA_OUTP" },
{ "LINEOUTR_RMV_SHORT", NULL, "LINEOUTR_ENA_OUTP" },
{ "HPOUTL", NULL, "HPL_RMV_SHORT" },
{ "HPOUTR", NULL, "HPR_RMV_SHORT" },
{ "LINEOUTL", NULL, "LINEOUTL_RMV_SHORT" },
{ "LINEOUTR", NULL, "LINEOUTR_RMV_SHORT" },
{ "LOP", NULL, "Left Speaker PGA" },
{ "LON", NULL, "Left Speaker PGA" },
{ "ROP", NULL, "Right Speaker PGA" },
{ "RON", NULL, "Right Speaker PGA" },
{ "Charge Pump", NULL, "CLK_DSP" },
{ "Left Headphone Output PGA", NULL, "Charge Pump" },
{ "Right Headphone Output PGA", NULL, "Charge Pump" },
{ "Left Line Output PGA", NULL, "Charge Pump" },
{ "Right Line Output PGA", NULL, "Charge Pump" },
};
static int wm8903_set_bias_level(struct snd_soc_component *component,
enum snd_soc_bias_level level)
{
switch (level) {
case SND_SOC_BIAS_ON:
break;
case SND_SOC_BIAS_PREPARE:
snd_soc_component_update_bits(component, WM8903_VMID_CONTROL_0,
WM8903_VMID_RES_MASK,
WM8903_VMID_RES_50K);
break;
case SND_SOC_BIAS_STANDBY:
if (snd_soc_component_get_bias_level(component) == SND_SOC_BIAS_OFF) {
snd_soc_component_update_bits(component, WM8903_BIAS_CONTROL_0,
WM8903_POBCTRL | WM8903_ISEL_MASK |
WM8903_STARTUP_BIAS_ENA |
WM8903_BIAS_ENA,
WM8903_POBCTRL |
(2 << WM8903_ISEL_SHIFT) |
WM8903_STARTUP_BIAS_ENA);
snd_soc_component_update_bits(component,
WM8903_ANALOGUE_SPK_OUTPUT_CONTROL_0,
WM8903_SPK_DISCHARGE,
WM8903_SPK_DISCHARGE);
msleep(33);
snd_soc_component_update_bits(component, WM8903_POWER_MANAGEMENT_5,
WM8903_SPKL_ENA | WM8903_SPKR_ENA,
WM8903_SPKL_ENA | WM8903_SPKR_ENA);
snd_soc_component_update_bits(component,
WM8903_ANALOGUE_SPK_OUTPUT_CONTROL_0,
WM8903_SPK_DISCHARGE, 0);
snd_soc_component_update_bits(component, WM8903_VMID_CONTROL_0,
WM8903_VMID_TIE_ENA |
WM8903_BUFIO_ENA |
WM8903_VMID_IO_ENA |
WM8903_VMID_SOFT_MASK |
WM8903_VMID_RES_MASK |
WM8903_VMID_BUF_ENA,
WM8903_VMID_TIE_ENA |
WM8903_BUFIO_ENA |
WM8903_VMID_IO_ENA |
(2 << WM8903_VMID_SOFT_SHIFT) |
WM8903_VMID_RES_250K |
WM8903_VMID_BUF_ENA);
msleep(129);
snd_soc_component_update_bits(component, WM8903_POWER_MANAGEMENT_5,
WM8903_SPKL_ENA | WM8903_SPKR_ENA,
0);
snd_soc_component_update_bits(component, WM8903_VMID_CONTROL_0,
WM8903_VMID_SOFT_MASK, 0);
snd_soc_component_update_bits(component, WM8903_VMID_CONTROL_0,
WM8903_VMID_RES_MASK,
WM8903_VMID_RES_50K);
snd_soc_component_update_bits(component, WM8903_BIAS_CONTROL_0,
WM8903_BIAS_ENA | WM8903_POBCTRL,
WM8903_BIAS_ENA);
/* By default no bypass paths are enabled so
* enable Class W support.
*/
dev_dbg(component->dev, "Enabling Class W\n");
snd_soc_component_update_bits(component, WM8903_CLASS_W_0,
WM8903_CP_DYN_FREQ |
WM8903_CP_DYN_V,
WM8903_CP_DYN_FREQ |
WM8903_CP_DYN_V);
}
snd_soc_component_update_bits(component, WM8903_VMID_CONTROL_0,
WM8903_VMID_RES_MASK,
WM8903_VMID_RES_250K);
break;
case SND_SOC_BIAS_OFF:
snd_soc_component_update_bits(component, WM8903_BIAS_CONTROL_0,
WM8903_BIAS_ENA, 0);
snd_soc_component_update_bits(component, WM8903_VMID_CONTROL_0,
WM8903_VMID_SOFT_MASK,
2 << WM8903_VMID_SOFT_SHIFT);
snd_soc_component_update_bits(component, WM8903_VMID_CONTROL_0,
WM8903_VMID_BUF_ENA, 0);
msleep(290);
snd_soc_component_update_bits(component, WM8903_VMID_CONTROL_0,
WM8903_VMID_TIE_ENA | WM8903_BUFIO_ENA |
WM8903_VMID_IO_ENA | WM8903_VMID_RES_MASK |
WM8903_VMID_SOFT_MASK |
WM8903_VMID_BUF_ENA, 0);
snd_soc_component_update_bits(component, WM8903_BIAS_CONTROL_0,
WM8903_STARTUP_BIAS_ENA, 0);
break;
}
return 0;
}
static int wm8903_set_dai_sysclk(struct snd_soc_dai *codec_dai,
int clk_id, unsigned int freq, int dir)
{
struct snd_soc_component *component = codec_dai->component;
struct wm8903_priv *wm8903 = snd_soc_component_get_drvdata(component);
wm8903->sysclk = freq;
return 0;
}
static int wm8903_set_dai_fmt(struct snd_soc_dai *codec_dai,
unsigned int fmt)
{
struct snd_soc_component *component = codec_dai->component;
u16 aif1 = snd_soc_component_read(component, WM8903_AUDIO_INTERFACE_1);
aif1 &= ~(WM8903_LRCLK_DIR | WM8903_BCLK_DIR | WM8903_AIF_FMT_MASK |
WM8903_AIF_LRCLK_INV | WM8903_AIF_BCLK_INV);
switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
case SND_SOC_DAIFMT_CBS_CFS:
break;
case SND_SOC_DAIFMT_CBS_CFM:
aif1 |= WM8903_LRCLK_DIR;
break;
case SND_SOC_DAIFMT_CBM_CFM:
aif1 |= WM8903_LRCLK_DIR | WM8903_BCLK_DIR;
break;
case SND_SOC_DAIFMT_CBM_CFS:
aif1 |= WM8903_BCLK_DIR;
break;
default:
return -EINVAL;
}
switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
case SND_SOC_DAIFMT_DSP_A:
aif1 |= 0x3;
break;
case SND_SOC_DAIFMT_DSP_B:
aif1 |= 0x3 | WM8903_AIF_LRCLK_INV;
break;
case SND_SOC_DAIFMT_I2S:
aif1 |= 0x2;
break;
case SND_SOC_DAIFMT_RIGHT_J:
aif1 |= 0x1;
break;
case SND_SOC_DAIFMT_LEFT_J:
break;
default:
return -EINVAL;
}
/* Clock inversion */
switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
case SND_SOC_DAIFMT_DSP_A:
case SND_SOC_DAIFMT_DSP_B:
/* frame inversion not valid for DSP modes */
switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
case SND_SOC_DAIFMT_NB_NF:
break;
case SND_SOC_DAIFMT_IB_NF:
aif1 |= WM8903_AIF_BCLK_INV;
break;
default:
return -EINVAL;
}
break;
case SND_SOC_DAIFMT_I2S:
case SND_SOC_DAIFMT_RIGHT_J:
case SND_SOC_DAIFMT_LEFT_J:
switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
case SND_SOC_DAIFMT_NB_NF:
break;
case SND_SOC_DAIFMT_IB_IF:
aif1 |= WM8903_AIF_BCLK_INV | WM8903_AIF_LRCLK_INV;
break;
case SND_SOC_DAIFMT_IB_NF:
aif1 |= WM8903_AIF_BCLK_INV;
break;
case SND_SOC_DAIFMT_NB_IF:
aif1 |= WM8903_AIF_LRCLK_INV;
break;
default:
return -EINVAL;
}
break;
default:
return -EINVAL;
}
snd_soc_component_write(component, WM8903_AUDIO_INTERFACE_1, aif1);
return 0;
}
static int wm8903_mute(struct snd_soc_dai *codec_dai, int mute, int direction)
{
struct snd_soc_component *component = codec_dai->component;
u16 reg;
reg = snd_soc_component_read(component, WM8903_DAC_DIGITAL_1);
if (mute)
reg |= WM8903_DAC_MUTE;
else
reg &= ~WM8903_DAC_MUTE;
snd_soc_component_write(component, WM8903_DAC_DIGITAL_1, reg);
return 0;
}
/* Lookup table for CLK_SYS/fs ratio. 256fs or more is recommended
* for optimal performance so we list the lower rates first and match
* on the last match we find. */
static struct {
int div;
int rate;
int mode;
int mclk_div;
} clk_sys_ratios[] = {
{ 64, 0x0, 0x0, 1 },
{ 68, 0x0, 0x1, 1 },
{ 125, 0x0, 0x2, 1 },
{ 128, 0x1, 0x0, 1 },
{ 136, 0x1, 0x1, 1 },
{ 192, 0x2, 0x0, 1 },
{ 204, 0x2, 0x1, 1 },
{ 64, 0x0, 0x0, 2 },
{ 68, 0x0, 0x1, 2 },
{ 125, 0x0, 0x2, 2 },
{ 128, 0x1, 0x0, 2 },
{ 136, 0x1, 0x1, 2 },
{ 192, 0x2, 0x0, 2 },
{ 204, 0x2, 0x1, 2 },
{ 250, 0x2, 0x2, 1 },
{ 256, 0x3, 0x0, 1 },
{ 272, 0x3, 0x1, 1 },
{ 384, 0x4, 0x0, 1 },
{ 408, 0x4, 0x1, 1 },
{ 375, 0x4, 0x2, 1 },
{ 512, 0x5, 0x0, 1 },
{ 544, 0x5, 0x1, 1 },
{ 500, 0x5, 0x2, 1 },
{ 768, 0x6, 0x0, 1 },
{ 816, 0x6, 0x1, 1 },
{ 750, 0x6, 0x2, 1 },
{ 1024, 0x7, 0x0, 1 },
{ 1088, 0x7, 0x1, 1 },
{ 1000, 0x7, 0x2, 1 },
{ 1408, 0x8, 0x0, 1 },
{ 1496, 0x8, 0x1, 1 },
{ 1536, 0x9, 0x0, 1 },
{ 1632, 0x9, 0x1, 1 },
{ 1500, 0x9, 0x2, 1 },
{ 250, 0x2, 0x2, 2 },
{ 256, 0x3, 0x0, 2 },
{ 272, 0x3, 0x1, 2 },
{ 384, 0x4, 0x0, 2 },
{ 408, 0x4, 0x1, 2 },
{ 375, 0x4, 0x2, 2 },
{ 512, 0x5, 0x0, 2 },
{ 544, 0x5, 0x1, 2 },
{ 500, 0x5, 0x2, 2 },
{ 768, 0x6, 0x0, 2 },
{ 816, 0x6, 0x1, 2 },
{ 750, 0x6, 0x2, 2 },
{ 1024, 0x7, 0x0, 2 },
{ 1088, 0x7, 0x1, 2 },
{ 1000, 0x7, 0x2, 2 },
{ 1408, 0x8, 0x0, 2 },
{ 1496, 0x8, 0x1, 2 },
{ 1536, 0x9, 0x0, 2 },
{ 1632, 0x9, 0x1, 2 },
{ 1500, 0x9, 0x2, 2 },
};
/* CLK_SYS/BCLK ratios - multiplied by 10 due to .5s */
static struct {
int ratio;
int div;
} bclk_divs[] = {
{ 10, 0 },
{ 20, 2 },
{ 30, 3 },
{ 40, 4 },
{ 50, 5 },
{ 60, 7 },
{ 80, 8 },
{ 100, 9 },
{ 120, 11 },
{ 160, 12 },
{ 200, 13 },
{ 220, 14 },
{ 240, 15 },
{ 300, 17 },
{ 320, 18 },
{ 440, 19 },
{ 480, 20 },
};
/* Sample rates for DSP */
static struct {
int rate;
int value;
} sample_rates[] = {
{ 8000, 0 },
{ 11025, 1 },
{ 12000, 2 },
{ 16000, 3 },
{ 22050, 4 },
{ 24000, 5 },
{ 32000, 6 },
{ 44100, 7 },
{ 48000, 8 },
{ 88200, 9 },
{ 96000, 10 },
{ 0, 0 },
};
static int wm8903_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params,
struct snd_soc_dai *dai)
{
struct snd_soc_component *component = dai->component;
struct wm8903_priv *wm8903 = snd_soc_component_get_drvdata(component);
int fs = params_rate(params);
int bclk;
int bclk_div;
int i;
int dsp_config;
int clk_config;
int best_val;
int cur_val;
int clk_sys;
u16 aif1 = snd_soc_component_read(component, WM8903_AUDIO_INTERFACE_1);
u16 aif2 = snd_soc_component_read(component, WM8903_AUDIO_INTERFACE_2);
u16 aif3 = snd_soc_component_read(component, WM8903_AUDIO_INTERFACE_3);
u16 clock0 = snd_soc_component_read(component, WM8903_CLOCK_RATES_0);
u16 clock1 = snd_soc_component_read(component, WM8903_CLOCK_RATES_1);
u16 dac_digital1 = snd_soc_component_read(component, WM8903_DAC_DIGITAL_1);
/* Enable sloping stopband filter for low sample rates */
if (fs <= 24000)
dac_digital1 |= WM8903_DAC_SB_FILT;
else
dac_digital1 &= ~WM8903_DAC_SB_FILT;
/* Configure sample rate logic for DSP - choose nearest rate */
dsp_config = 0;
best_val = abs(sample_rates[dsp_config].rate - fs);
for (i = 1; i < ARRAY_SIZE(sample_rates); i++) {
cur_val = abs(sample_rates[i].rate - fs);
if (cur_val <= best_val) {
dsp_config = i;
best_val = cur_val;
}
}
dev_dbg(component->dev, "DSP fs = %dHz\n", sample_rates[dsp_config].rate);
clock1 &= ~WM8903_SAMPLE_RATE_MASK;
clock1 |= sample_rates[dsp_config].value;
aif1 &= ~WM8903_AIF_WL_MASK;
bclk = 2 * fs;
switch (params_width(params)) {
case 16:
bclk *= 16;
break;
case 20:
bclk *= 20;
aif1 |= 0x4;
break;
case 24:
bclk *= 24;
aif1 |= 0x8;
break;
case 32:
bclk *= 32;
aif1 |= 0xc;
break;
default:
return -EINVAL;
}
dev_dbg(component->dev, "MCLK = %dHz, target sample rate = %dHz\n",
wm8903->sysclk, fs);
/* We may not have an MCLK which allows us to generate exactly
* the clock we want, particularly with USB derived inputs, so
* approximate.
*/
clk_config = 0;
best_val = abs((wm8903->sysclk /
(clk_sys_ratios[0].mclk_div *
clk_sys_ratios[0].div)) - fs);
for (i = 1; i < ARRAY_SIZE(clk_sys_ratios); i++) {
cur_val = abs((wm8903->sysclk /
(clk_sys_ratios[i].mclk_div *
clk_sys_ratios[i].div)) - fs);
if (cur_val <= best_val) {
clk_config = i;
best_val = cur_val;
}
}
if (clk_sys_ratios[clk_config].mclk_div == 2) {
clock0 |= WM8903_MCLKDIV2;
clk_sys = wm8903->sysclk / 2;
} else {
clock0 &= ~WM8903_MCLKDIV2;
clk_sys = wm8903->sysclk;
}
clock1 &= ~(WM8903_CLK_SYS_RATE_MASK |
WM8903_CLK_SYS_MODE_MASK);
clock1 |= clk_sys_ratios[clk_config].rate << WM8903_CLK_SYS_RATE_SHIFT;
clock1 |= clk_sys_ratios[clk_config].mode << WM8903_CLK_SYS_MODE_SHIFT;
dev_dbg(component->dev, "CLK_SYS_RATE=%x, CLK_SYS_MODE=%x div=%d\n",
clk_sys_ratios[clk_config].rate,
clk_sys_ratios[clk_config].mode,
clk_sys_ratios[clk_config].div);
dev_dbg(component->dev, "Actual CLK_SYS = %dHz\n", clk_sys);
/* We may not get quite the right frequency if using
* approximate clocks so look for the closest match that is
* higher than the target (we need to ensure that there enough
* BCLKs to clock out the samples).
*/
bclk_div = 0;
best_val = ((clk_sys * 10) / bclk_divs[0].ratio) - bclk;
i = 1;
while (i < ARRAY_SIZE(bclk_divs)) {
cur_val = ((clk_sys * 10) / bclk_divs[i].ratio) - bclk;
if (cur_val < 0) /* BCLK table is sorted */
break;
bclk_div = i;
best_val = cur_val;
i++;
}
aif2 &= ~WM8903_BCLK_DIV_MASK;
aif3 &= ~WM8903_LRCLK_RATE_MASK;
dev_dbg(component->dev, "BCLK ratio %d for %dHz - actual BCLK = %dHz\n",
bclk_divs[bclk_div].ratio / 10, bclk,
(clk_sys * 10) / bclk_divs[bclk_div].ratio);
aif2 |= bclk_divs[bclk_div].div;
aif3 |= bclk / fs;
wm8903->fs = params_rate(params);
wm8903_set_deemph(component);
snd_soc_component_write(component, WM8903_CLOCK_RATES_0, clock0);
snd_soc_component_write(component, WM8903_CLOCK_RATES_1, clock1);
snd_soc_component_write(component, WM8903_AUDIO_INTERFACE_1, aif1);
snd_soc_component_write(component, WM8903_AUDIO_INTERFACE_2, aif2);
snd_soc_component_write(component, WM8903_AUDIO_INTERFACE_3, aif3);
snd_soc_component_write(component, WM8903_DAC_DIGITAL_1, dac_digital1);
return 0;
}
/**
* wm8903_mic_detect - Enable microphone detection via the WM8903 IRQ
*
* @component: WM8903 component
* @jack: jack to report detection events on
* @det: value to report for presence detection
* @shrt: value to report for short detection
*
* Enable microphone detection via IRQ on the WM8903. If GPIOs are
* being used to bring out signals to the processor then only platform
* data configuration is needed for WM8903 and processor GPIOs should
* be configured using snd_soc_jack_add_gpios() instead.
*
* The current threasholds for detection should be configured using
* micdet_cfg in the platform data. Using this function will force on
* the microphone bias for the device.
*/
int wm8903_mic_detect(struct snd_soc_component *component, struct snd_soc_jack *jack,
int det, int shrt)
{
struct wm8903_priv *wm8903 = snd_soc_component_get_drvdata(component);
int irq_mask = WM8903_MICDET_EINT | WM8903_MICSHRT_EINT;
dev_dbg(component->dev, "Enabling microphone detection: %x %x\n",
det, shrt);
/* Store the configuration */
wm8903->mic_jack = jack;
wm8903->mic_det = det;
wm8903->mic_short = shrt;
/* Enable interrupts we've got a report configured for */
if (det)
irq_mask &= ~WM8903_MICDET_EINT;
if (shrt)
irq_mask &= ~WM8903_MICSHRT_EINT;
snd_soc_component_update_bits(component, WM8903_INTERRUPT_STATUS_1_MASK,
WM8903_MICDET_EINT | WM8903_MICSHRT_EINT,
irq_mask);
if (det || shrt) {
/* Enable mic detection, this may not have been set through
* platform data (eg, if the defaults are OK). */
snd_soc_component_update_bits(component, WM8903_WRITE_SEQUENCER_0,
WM8903_WSEQ_ENA, WM8903_WSEQ_ENA);
snd_soc_component_update_bits(component, WM8903_MIC_BIAS_CONTROL_0,
WM8903_MICDET_ENA, WM8903_MICDET_ENA);
} else {
snd_soc_component_update_bits(component, WM8903_MIC_BIAS_CONTROL_0,
WM8903_MICDET_ENA, 0);
}
return 0;
}
EXPORT_SYMBOL_GPL(wm8903_mic_detect);
static irqreturn_t wm8903_irq(int irq, void *data)
{
struct wm8903_priv *wm8903 = data;
int mic_report, ret;
unsigned int int_val, mask, int_pol;
ret = regmap_read(wm8903->regmap, WM8903_INTERRUPT_STATUS_1_MASK,
&mask);
if (ret != 0) {
dev_err(wm8903->dev, "Failed to read IRQ mask: %d\n", ret);
return IRQ_NONE;
}
ret = regmap_read(wm8903->regmap, WM8903_INTERRUPT_STATUS_1, &int_val);
if (ret != 0) {
dev_err(wm8903->dev, "Failed to read IRQ status: %d\n", ret);
return IRQ_NONE;
}
int_val &= ~mask;
if (int_val & WM8903_WSEQ_BUSY_EINT) {
dev_warn(wm8903->dev, "Write sequencer done\n");
}
/*
* The rest is microphone jack detection. We need to manually
* invert the polarity of the interrupt after each event - to
* simplify the code keep track of the last state we reported
* and just invert the relevant bits in both the report and
* the polarity register.
*/
mic_report = wm8903->mic_last_report;
ret = regmap_read(wm8903->regmap, WM8903_INTERRUPT_POLARITY_1,
&int_pol);
if (ret != 0) {
dev_err(wm8903->dev, "Failed to read interrupt polarity: %d\n",
ret);
return IRQ_HANDLED;
}
#ifndef CONFIG_SND_SOC_WM8903_MODULE
if (int_val & (WM8903_MICSHRT_EINT | WM8903_MICDET_EINT))
trace_snd_soc_jack_irq(dev_name(wm8903->dev));
#endif
if (int_val & WM8903_MICSHRT_EINT) {
dev_dbg(wm8903->dev, "Microphone short (pol=%x)\n", int_pol);
mic_report ^= wm8903->mic_short;
int_pol ^= WM8903_MICSHRT_INV;
}
if (int_val & WM8903_MICDET_EINT) {
dev_dbg(wm8903->dev, "Microphone detect (pol=%x)\n", int_pol);
mic_report ^= wm8903->mic_det;
int_pol ^= WM8903_MICDET_INV;
msleep(wm8903->mic_delay);
}
regmap_update_bits(wm8903->regmap, WM8903_INTERRUPT_POLARITY_1,
WM8903_MICSHRT_INV | WM8903_MICDET_INV, int_pol);
snd_soc_jack_report(wm8903->mic_jack, mic_report,
wm8903->mic_short | wm8903->mic_det);
wm8903->mic_last_report = mic_report;
return IRQ_HANDLED;
}
#define WM8903_PLAYBACK_RATES (SNDRV_PCM_RATE_8000 |\
SNDRV_PCM_RATE_11025 | \
SNDRV_PCM_RATE_16000 | \
SNDRV_PCM_RATE_22050 | \
SNDRV_PCM_RATE_32000 | \
SNDRV_PCM_RATE_44100 | \
SNDRV_PCM_RATE_48000 | \
SNDRV_PCM_RATE_88200 | \
SNDRV_PCM_RATE_96000)
#define WM8903_CAPTURE_RATES (SNDRV_PCM_RATE_8000 |\
SNDRV_PCM_RATE_11025 | \
SNDRV_PCM_RATE_16000 | \
SNDRV_PCM_RATE_22050 | \
SNDRV_PCM_RATE_32000 | \
SNDRV_PCM_RATE_44100 | \
SNDRV_PCM_RATE_48000)
#define WM8903_FORMATS (SNDRV_PCM_FMTBIT_S16_LE |\
SNDRV_PCM_FMTBIT_S20_3LE |\
SNDRV_PCM_FMTBIT_S24_LE)
static const struct snd_soc_dai_ops wm8903_dai_ops = {
.hw_params = wm8903_hw_params,
.mute_stream = wm8903_mute,
.set_fmt = wm8903_set_dai_fmt,
.set_sysclk = wm8903_set_dai_sysclk,
.no_capture_mute = 1,
};
static struct snd_soc_dai_driver wm8903_dai = {
.name = "wm8903-hifi",
.playback = {
.stream_name = "Playback",
.channels_min = 2,
.channels_max = 2,
.rates = WM8903_PLAYBACK_RATES,
.formats = WM8903_FORMATS,
},
.capture = {
.stream_name = "Capture",
.channels_min = 2,
.channels_max = 2,
.rates = WM8903_CAPTURE_RATES,
.formats = WM8903_FORMATS,
},
.ops = &wm8903_dai_ops,
.symmetric_rates = 1,
};
static int wm8903_resume(struct snd_soc_component *component)
{
struct wm8903_priv *wm8903 = snd_soc_component_get_drvdata(component);
regcache_sync(wm8903->regmap);
return 0;
}
#ifdef CONFIG_GPIOLIB
static int wm8903_gpio_request(struct gpio_chip *chip, unsigned offset)
{
if (offset >= WM8903_NUM_GPIO)
return -EINVAL;
return 0;
}
static int wm8903_gpio_direction_in(struct gpio_chip *chip, unsigned offset)
{
struct wm8903_priv *wm8903 = gpiochip_get_data(chip);
unsigned int mask, val;
int ret;
mask = WM8903_GP1_FN_MASK | WM8903_GP1_DIR_MASK;
val = (WM8903_GPn_FN_GPIO_INPUT << WM8903_GP1_FN_SHIFT) |
WM8903_GP1_DIR;
ret = regmap_update_bits(wm8903->regmap,
WM8903_GPIO_CONTROL_1 + offset, mask, val);
if (ret < 0)
return ret;
return 0;
}
static int wm8903_gpio_get(struct gpio_chip *chip, unsigned offset)
{
struct wm8903_priv *wm8903 = gpiochip_get_data(chip);
unsigned int reg;
regmap_read(wm8903->regmap, WM8903_GPIO_CONTROL_1 + offset, &reg);
return !!((reg & WM8903_GP1_LVL_MASK) >> WM8903_GP1_LVL_SHIFT);
}
static int wm8903_gpio_direction_out(struct gpio_chip *chip,
unsigned offset, int value)
{
struct wm8903_priv *wm8903 = gpiochip_get_data(chip);
unsigned int mask, val;
int ret;
mask = WM8903_GP1_FN_MASK | WM8903_GP1_DIR_MASK | WM8903_GP1_LVL_MASK;
val = (WM8903_GPn_FN_GPIO_OUTPUT << WM8903_GP1_FN_SHIFT) |
(value << WM8903_GP2_LVL_SHIFT);
ret = regmap_update_bits(wm8903->regmap,
WM8903_GPIO_CONTROL_1 + offset, mask, val);
if (ret < 0)
return ret;
return 0;
}
static void wm8903_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
{
struct wm8903_priv *wm8903 = gpiochip_get_data(chip);
regmap_update_bits(wm8903->regmap, WM8903_GPIO_CONTROL_1 + offset,
WM8903_GP1_LVL_MASK,
!!value << WM8903_GP1_LVL_SHIFT);
}
static const struct gpio_chip wm8903_template_chip = {
.label = "wm8903",
.owner = THIS_MODULE,
.request = wm8903_gpio_request,
.direction_input = wm8903_gpio_direction_in,
.get = wm8903_gpio_get,
.direction_output = wm8903_gpio_direction_out,
.set = wm8903_gpio_set,
.can_sleep = 1,
};
static void wm8903_init_gpio(struct wm8903_priv *wm8903)
{
struct wm8903_platform_data *pdata = wm8903->pdata;
int ret;
wm8903->gpio_chip = wm8903_template_chip;
wm8903->gpio_chip.ngpio = WM8903_NUM_GPIO;
wm8903->gpio_chip.parent = wm8903->dev;
if (pdata->gpio_base)
wm8903->gpio_chip.base = pdata->gpio_base;
else
wm8903->gpio_chip.base = -1;
ret = gpiochip_add_data(&wm8903->gpio_chip, wm8903);
if (ret != 0)
dev_err(wm8903->dev, "Failed to add GPIOs: %d\n", ret);
}
static void wm8903_free_gpio(struct wm8903_priv *wm8903)
{
gpiochip_remove(&wm8903->gpio_chip);
}
#else
static void wm8903_init_gpio(struct wm8903_priv *wm8903)
{
}
static void wm8903_free_gpio(struct wm8903_priv *wm8903)
{
}
#endif
static const struct snd_soc_component_driver soc_component_dev_wm8903 = {
.resume = wm8903_resume,
.set_bias_level = wm8903_set_bias_level,
.seq_notifier = wm8903_seq_notifier,
.controls = wm8903_snd_controls,
.num_controls = ARRAY_SIZE(wm8903_snd_controls),
.dapm_widgets = wm8903_dapm_widgets,
.num_dapm_widgets = ARRAY_SIZE(wm8903_dapm_widgets),
.dapm_routes = wm8903_intercon,
.num_dapm_routes = ARRAY_SIZE(wm8903_intercon),
.suspend_bias_off = 1,
.idle_bias_on = 1,
.use_pmdown_time = 1,
.endianness = 1,
.non_legacy_dai_naming = 1,
};
static const struct regmap_config wm8903_regmap = {
.reg_bits = 8,
.val_bits = 16,
.max_register = WM8903_MAX_REGISTER,
.volatile_reg = wm8903_volatile_register,
.readable_reg = wm8903_readable_register,
.cache_type = REGCACHE_RBTREE,
.reg_defaults = wm8903_reg_defaults,
.num_reg_defaults = ARRAY_SIZE(wm8903_reg_defaults),
};
static int wm8903_set_pdata_irq_trigger(struct i2c_client *i2c,
struct wm8903_platform_data *pdata)
{
struct irq_data *irq_data = irq_get_irq_data(i2c->irq);
if (!irq_data) {
dev_err(&i2c->dev, "Invalid IRQ: %d\n",
i2c->irq);
return -EINVAL;
}
switch (irqd_get_trigger_type(irq_data)) {
case IRQ_TYPE_NONE:
default:
/*
* We assume the controller imposes no restrictions,
* so we are able to select active-high
*/
fallthrough;
case IRQ_TYPE_LEVEL_HIGH:
pdata->irq_active_low = false;
break;
case IRQ_TYPE_LEVEL_LOW:
pdata->irq_active_low = true;
break;
}
return 0;
}
static int wm8903_set_pdata_from_of(struct i2c_client *i2c,
struct wm8903_platform_data *pdata)
{
const struct device_node *np = i2c->dev.of_node;
u32 val32;
int i;
if (of_property_read_u32(np, "micdet-cfg", &val32) >= 0)
pdata->micdet_cfg = val32;
if (of_property_read_u32(np, "micdet-delay", &val32) >= 0)
pdata->micdet_delay = val32;
if (of_property_read_u32_array(np, "gpio-cfg", pdata->gpio_cfg,
ARRAY_SIZE(pdata->gpio_cfg)) >= 0) {
/*
* In device tree: 0 means "write 0",
* 0xffffffff means "don't touch".
*
* In platform data: 0 means "don't touch",
* 0x8000 means "write 0".
*
* Note: WM8903_GPIO_CONFIG_ZERO == 0x8000.
*
* Convert from DT to pdata representation here,
* so no other code needs to change.
*/
for (i = 0; i < ARRAY_SIZE(pdata->gpio_cfg); i++) {
if (pdata->gpio_cfg[i] == 0) {
pdata->gpio_cfg[i] = WM8903_GPIO_CONFIG_ZERO;
} else if (pdata->gpio_cfg[i] == 0xffffffff) {
pdata->gpio_cfg[i] = 0;
} else if (pdata->gpio_cfg[i] > 0x7fff) {
dev_err(&i2c->dev, "Invalid gpio-cfg[%d] %x\n",
i, pdata->gpio_cfg[i]);
return -EINVAL;
}
}
}
return 0;
}
static int wm8903_i2c_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
{
struct wm8903_platform_data *pdata = dev_get_platdata(&i2c->dev);
struct wm8903_priv *wm8903;
int trigger;
bool mic_gpio = false;
unsigned int val, irq_pol;
int ret, i;
wm8903 = devm_kzalloc(&i2c->dev, sizeof(*wm8903), GFP_KERNEL);
if (wm8903 == NULL)
return -ENOMEM;
mutex_init(&wm8903->lock);
wm8903->dev = &i2c->dev;
wm8903->regmap = devm_regmap_init_i2c(i2c, &wm8903_regmap);
if (IS_ERR(wm8903->regmap)) {
ret = PTR_ERR(wm8903->regmap);
dev_err(&i2c->dev, "Failed to allocate register map: %d\n",
ret);
return ret;
}
i2c_set_clientdata(i2c, wm8903);
/* If no platform data was supplied, create storage for defaults */
if (pdata) {
wm8903->pdata = pdata;
} else {
wm8903->pdata = devm_kzalloc(&i2c->dev, sizeof(*wm8903->pdata),
GFP_KERNEL);
if (!wm8903->pdata)
return -ENOMEM;
if (i2c->irq) {
ret = wm8903_set_pdata_irq_trigger(i2c, wm8903->pdata);
if (ret != 0)
return ret;
}
if (i2c->dev.of_node) {
ret = wm8903_set_pdata_from_of(i2c, wm8903->pdata);
if (ret != 0)
return ret;
}
}
pdata = wm8903->pdata;
for (i = 0; i < ARRAY_SIZE(wm8903->supplies); i++)
wm8903->supplies[i].supply = wm8903_supply_names[i];
ret = devm_regulator_bulk_get(&i2c->dev, ARRAY_SIZE(wm8903->supplies),
wm8903->supplies);
if (ret != 0) {
dev_err(&i2c->dev, "Failed to request supplies: %d\n", ret);
return ret;
}
ret = regulator_bulk_enable(ARRAY_SIZE(wm8903->supplies),
wm8903->supplies);
if (ret != 0) {
dev_err(&i2c->dev, "Failed to enable supplies: %d\n", ret);
return ret;
}
ret = regmap_read(wm8903->regmap, WM8903_SW_RESET_AND_ID, &val);
if (ret != 0) {
dev_err(&i2c->dev, "Failed to read chip ID: %d\n", ret);
goto err;
}
if (val != 0x8903) {
dev_err(&i2c->dev, "Device with ID %x is not a WM8903\n", val);
ret = -ENODEV;
goto err;
}
ret = regmap_read(wm8903->regmap, WM8903_REVISION_NUMBER, &val);
if (ret != 0) {
dev_err(&i2c->dev, "Failed to read chip revision: %d\n", ret);
goto err;
}
dev_info(&i2c->dev, "WM8903 revision %c\n",
(val & WM8903_CHIP_REV_MASK) + 'A');
/* Reset the device */
regmap_write(wm8903->regmap, WM8903_SW_RESET_AND_ID, 0x8903);
wm8903_init_gpio(wm8903);
/* Set up GPIO pin state, detect if any are MIC detect outputs */
for (i = 0; i < ARRAY_SIZE(pdata->gpio_cfg); i++) {
if ((!pdata->gpio_cfg[i]) ||
(pdata->gpio_cfg[i] > WM8903_GPIO_CONFIG_ZERO))
continue;
regmap_write(wm8903->regmap, WM8903_GPIO_CONTROL_1 + i,
pdata->gpio_cfg[i] & 0x7fff);
val = (pdata->gpio_cfg[i] & WM8903_GP1_FN_MASK)
>> WM8903_GP1_FN_SHIFT;
switch (val) {
case WM8903_GPn_FN_MICBIAS_CURRENT_DETECT:
case WM8903_GPn_FN_MICBIAS_SHORT_DETECT:
mic_gpio = true;
break;
default:
break;
}
}
/* Set up microphone detection */
regmap_write(wm8903->regmap, WM8903_MIC_BIAS_CONTROL_0,
pdata->micdet_cfg);
/* Microphone detection needs the WSEQ clock */
if (pdata->micdet_cfg)
regmap_update_bits(wm8903->regmap, WM8903_WRITE_SEQUENCER_0,
WM8903_WSEQ_ENA, WM8903_WSEQ_ENA);
/* If microphone detection is enabled by pdata but
* detected via IRQ then interrupts can be lost before
* the machine driver has set up microphone detection
* IRQs as the IRQs are clear on read. The detection
* will be enabled when the machine driver configures.
*/
WARN_ON(!mic_gpio && (pdata->micdet_cfg & WM8903_MICDET_ENA));
wm8903->mic_delay = pdata->micdet_delay;
if (i2c->irq) {
if (pdata->irq_active_low) {
trigger = IRQF_TRIGGER_LOW;
irq_pol = WM8903_IRQ_POL;
} else {
trigger = IRQF_TRIGGER_HIGH;
irq_pol = 0;
}
regmap_update_bits(wm8903->regmap, WM8903_INTERRUPT_CONTROL,
WM8903_IRQ_POL, irq_pol);
ret = request_threaded_irq(i2c->irq, NULL, wm8903_irq,
trigger | IRQF_ONESHOT,
"wm8903", wm8903);
if (ret != 0) {
dev_err(wm8903->dev, "Failed to request IRQ: %d\n",
ret);
return ret;
}
/* Enable write sequencer interrupts */
regmap_update_bits(wm8903->regmap,
WM8903_INTERRUPT_STATUS_1_MASK,
WM8903_IM_WSEQ_BUSY_EINT, 0);
}
/* Latch volume update bits */
regmap_update_bits(wm8903->regmap, WM8903_ADC_DIGITAL_VOLUME_LEFT,
WM8903_ADCVU, WM8903_ADCVU);
regmap_update_bits(wm8903->regmap, WM8903_ADC_DIGITAL_VOLUME_RIGHT,
WM8903_ADCVU, WM8903_ADCVU);
regmap_update_bits(wm8903->regmap, WM8903_DAC_DIGITAL_VOLUME_LEFT,
WM8903_DACVU, WM8903_DACVU);
regmap_update_bits(wm8903->regmap, WM8903_DAC_DIGITAL_VOLUME_RIGHT,
WM8903_DACVU, WM8903_DACVU);
regmap_update_bits(wm8903->regmap, WM8903_ANALOGUE_OUT1_LEFT,
WM8903_HPOUTVU, WM8903_HPOUTVU);
regmap_update_bits(wm8903->regmap, WM8903_ANALOGUE_OUT1_RIGHT,
WM8903_HPOUTVU, WM8903_HPOUTVU);
regmap_update_bits(wm8903->regmap, WM8903_ANALOGUE_OUT2_LEFT,
WM8903_LINEOUTVU, WM8903_LINEOUTVU);
regmap_update_bits(wm8903->regmap, WM8903_ANALOGUE_OUT2_RIGHT,
WM8903_LINEOUTVU, WM8903_LINEOUTVU);
regmap_update_bits(wm8903->regmap, WM8903_ANALOGUE_OUT3_LEFT,
WM8903_SPKVU, WM8903_SPKVU);
regmap_update_bits(wm8903->regmap, WM8903_ANALOGUE_OUT3_RIGHT,
WM8903_SPKVU, WM8903_SPKVU);
/* Enable DAC soft mute by default */
regmap_update_bits(wm8903->regmap, WM8903_DAC_DIGITAL_1,
WM8903_DAC_MUTEMODE | WM8903_DAC_MUTE,
WM8903_DAC_MUTEMODE | WM8903_DAC_MUTE);
ret = devm_snd_soc_register_component(&i2c->dev,
&soc_component_dev_wm8903, &wm8903_dai, 1);
if (ret != 0)
goto err;
return 0;
err:
regulator_bulk_disable(ARRAY_SIZE(wm8903->supplies),
wm8903->supplies);
return ret;
}
static int wm8903_i2c_remove(struct i2c_client *client)
{
struct wm8903_priv *wm8903 = i2c_get_clientdata(client);
regulator_bulk_disable(ARRAY_SIZE(wm8903->supplies),
wm8903->supplies);
if (client->irq)
free_irq(client->irq, wm8903);
wm8903_free_gpio(wm8903);
return 0;
}
static const struct of_device_id wm8903_of_match[] = {
{ .compatible = "wlf,wm8903", },
{},
};
MODULE_DEVICE_TABLE(of, wm8903_of_match);
static const struct i2c_device_id wm8903_i2c_id[] = {
{ "wm8903", 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, wm8903_i2c_id);
static struct i2c_driver wm8903_i2c_driver = {
.driver = {
.name = "wm8903",
.of_match_table = wm8903_of_match,
},
.probe = wm8903_i2c_probe,
.remove = wm8903_i2c_remove,
.id_table = wm8903_i2c_id,
};
module_i2c_driver(wm8903_i2c_driver);
MODULE_DESCRIPTION("ASoC WM8903 driver");
MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.cm>");
MODULE_LICENSE("GPL");