Minki/linux
1
0
Fork 1
mirror of https://github.com/torvalds/linux.git synced 2024-12-23 03:11:46 +00:00
Code Issues Packages Projects Releases Wiki Activity
bc3668ea04
linux/arch/arm/mm/proc-v7.S
Santosh Shilimkar 6323fa2256 ARM: mm: update __v7_setup() to the new LoUIS cache maintenance API 
The ARMv7 processor setup function __v7_setup() cleans and invalidates the
CPU cache before enabling MMU to start the CPU with a clean CPU local cache.

But on ARMv7 architectures like Cortex-[A15/A8], this code will end
up flushing the L2 caches(up to level of Coherency) which is undesirable
and expensive. The setup functions are used in the CPU hotplug scenario too
and hence flushing all cache levels should be avoided.

This patch replaces the cache flushing call with the newly introduced
v7 dcache LoUIS API where only cache levels up to LoUIS are cleaned and
invalidated when a processors executes __v7_setup which is the expected
behavior.

For processors like A9 and A5 where the L2 cache is an outer one the
behavior should be unchanged.

Reviewed-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Tested-by: Shawn Guo <shawn.guo@linaro.org>
2012-09-25 11:20:26 +01:00

376 lines
10 KiB
ArmAsm
Raw Blame History

/*
* linux/arch/arm/mm/proc-v7.S
*
* Copyright (C) 2001 Deep Blue Solutions Ltd.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This is the "shell" of the ARMv7 processor support.
*/
#include <linux/init.h>
#include <linux/linkage.h>
#include <asm/assembler.h>
#include <asm/asm-offsets.h>
#include <asm/hwcap.h>
#include <asm/pgtable-hwdef.h>
#include <asm/pgtable.h>
#include "proc-macros.S"
#ifdef CONFIG_ARM_LPAE
#include "proc-v7-3level.S"
#else
#include "proc-v7-2level.S"
#endif
ENTRY(cpu_v7_proc_init)
mov pc, lr
ENDPROC(cpu_v7_proc_init)
ENTRY(cpu_v7_proc_fin)
mrc p15, 0, r0, c1, c0, 0 @ ctrl register
bic r0, r0, #0x1000 @ ...i............
bic r0, r0, #0x0006 @ .............ca.
mcr p15, 0, r0, c1, c0, 0 @ disable caches
mov pc, lr
ENDPROC(cpu_v7_proc_fin)
/*
* cpu_v7_reset(loc)
*
* Perform a soft reset of the system. Put the CPU into the
* same state as it would be if it had been reset, and branch
* to what would be the reset vector.
*
* - loc - location to jump to for soft reset
*
* This code must be executed using a flat identity mapping with
* caches disabled.
*/
.align 5
.pushsection .idmap.text, "ax"
ENTRY(cpu_v7_reset)
mrc p15, 0, r1, c1, c0, 0 @ ctrl register
bic r1, r1, #0x1 @ ...............m
THUMB( bic r1, r1, #1 << 30 ) @ SCTLR.TE (Thumb exceptions)
mcr p15, 0, r1, c1, c0, 0 @ disable MMU
isb
mov pc, r0
ENDPROC(cpu_v7_reset)
.popsection
/*
* cpu_v7_do_idle()
*
* Idle the processor (eg, wait for interrupt).
*
* IRQs are already disabled.
*/
ENTRY(cpu_v7_do_idle)
dsb @ WFI may enter a low-power mode
wfi
mov pc, lr
ENDPROC(cpu_v7_do_idle)
ENTRY(cpu_v7_dcache_clean_area)
#ifndef TLB_CAN_READ_FROM_L1_CACHE
dcache_line_size r2, r3
1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
add r0, r0, r2
subs r1, r1, r2
bhi 1b
dsb
#endif
mov pc, lr
ENDPROC(cpu_v7_dcache_clean_area)
string cpu_v7_name, "ARMv7 Processor"
.align
/* Suspend/resume support: derived from arch/arm/mach-s5pv210/sleep.S */
.globl cpu_v7_suspend_size
.equ cpu_v7_suspend_size, 4 * 8
#ifdef CONFIG_ARM_CPU_SUSPEND
ENTRY(cpu_v7_do_suspend)
stmfd sp!, {r4 - r10, lr}
mrc p15, 0, r4, c13, c0, 0 @ FCSE/PID
mrc p15, 0, r5, c13, c0, 3 @ User r/o thread ID
stmia r0!, {r4 - r5}
mrc p15, 0, r6, c3, c0, 0 @ Domain ID
mrc p15, 0, r7, c2, c0, 1 @ TTB 1
mrc p15, 0, r11, c2, c0, 2 @ TTB control register
mrc p15, 0, r8, c1, c0, 0 @ Control register
mrc p15, 0, r9, c1, c0, 1 @ Auxiliary control register
mrc p15, 0, r10, c1, c0, 2 @ Co-processor access control
stmia r0, {r6 - r11}
ldmfd sp!, {r4 - r10, pc}
ENDPROC(cpu_v7_do_suspend)
ENTRY(cpu_v7_do_resume)
mov ip, #0
mcr p15, 0, ip, c8, c7, 0 @ invalidate TLBs
mcr p15, 0, ip, c7, c5, 0 @ invalidate I cache
mcr p15, 0, ip, c13, c0, 1 @ set reserved context ID
ldmia r0!, {r4 - r5}
mcr p15, 0, r4, c13, c0, 0 @ FCSE/PID
mcr p15, 0, r5, c13, c0, 3 @ User r/o thread ID
ldmia r0, {r6 - r11}
mcr p15, 0, r6, c3, c0, 0 @ Domain ID
#ifndef CONFIG_ARM_LPAE
ALT_SMP(orr r1, r1, #TTB_FLAGS_SMP)
ALT_UP(orr r1, r1, #TTB_FLAGS_UP)
#endif
mcr p15, 0, r1, c2, c0, 0 @ TTB 0
mcr p15, 0, r7, c2, c0, 1 @ TTB 1
mcr p15, 0, r11, c2, c0, 2 @ TTB control register
mrc p15, 0, r4, c1, c0, 1 @ Read Auxiliary control register
teq r4, r9 @ Is it already set?
mcrne p15, 0, r9, c1, c0, 1 @ No, so write it
mcr p15, 0, r10, c1, c0, 2 @ Co-processor access control
ldr r4, =PRRR @ PRRR
ldr r5, =NMRR @ NMRR
mcr p15, 0, r4, c10, c2, 0 @ write PRRR
mcr p15, 0, r5, c10, c2, 1 @ write NMRR
isb
dsb
mov r0, r8 @ control register
b cpu_resume_mmu
ENDPROC(cpu_v7_do_resume)
#endif
__CPUINIT
/*
* __v7_setup
*
* Initialise TLB, Caches, and MMU state ready to switch the MMU
* on. Return in r0 the new CP15 C1 control register setting.
*
* This should be able to cover all ARMv7 cores.
*
* It is assumed that:
* - cache type register is implemented
*/
__v7_ca5mp_setup:
__v7_ca9mp_setup:
mov r10, #(1 << 0) @ TLB ops broadcasting
b 1f
__v7_ca7mp_setup:
__v7_ca15mp_setup:
mov r10, #0
1:
#ifdef CONFIG_SMP
ALT_SMP(mrc p15, 0, r0, c1, c0, 1)
ALT_UP(mov r0, #(1 << 6)) @ fake it for UP
tst r0, #(1 << 6) @ SMP/nAMP mode enabled?
orreq r0, r0, #(1 << 6) @ Enable SMP/nAMP mode
orreq r0, r0, r10 @ Enable CPU-specific SMP bits
mcreq p15, 0, r0, c1, c0, 1
#endif
__v7_setup:
adr r12, __v7_setup_stack @ the local stack
stmia r12, {r0-r5, r7, r9, r11, lr}
bl v7_flush_dcache_louis
ldmia r12, {r0-r5, r7, r9, r11, lr}
mrc p15, 0, r0, c0, c0, 0 @ read main ID register
and r10, r0, #0xff000000 @ ARM?
teq r10, #0x41000000
bne 3f
and r5, r0, #0x00f00000 @ variant
and r6, r0, #0x0000000f @ revision
orr r6, r6, r5, lsr #20-4 @ combine variant and revision
ubfx r0, r0, #4, #12 @ primary part number
/* Cortex-A8 Errata */
ldr r10, =0x00000c08 @ Cortex-A8 primary part number
teq r0, r10
bne 2f
#ifdef CONFIG_ARM_ERRATA_430973
teq r5, #0x00100000 @ only present in r1p*
mrceq p15, 0, r10, c1, c0, 1 @ read aux control register
orreq r10, r10, #(1 << 6) @ set IBE to 1
mcreq p15, 0, r10, c1, c0, 1 @ write aux control register
#endif
#ifdef CONFIG_ARM_ERRATA_458693
teq r6, #0x20 @ only present in r2p0
mrceq p15, 0, r10, c1, c0, 1 @ read aux control register
orreq r10, r10, #(1 << 5) @ set L1NEON to 1
orreq r10, r10, #(1 << 9) @ set PLDNOP to 1
mcreq p15, 0, r10, c1, c0, 1 @ write aux control register
#endif
#ifdef CONFIG_ARM_ERRATA_460075
teq r6, #0x20 @ only present in r2p0
mrceq p15, 1, r10, c9, c0, 2 @ read L2 cache aux ctrl register
tsteq r10, #1 << 22
orreq r10, r10, #(1 << 22) @ set the Write Allocate disable bit
mcreq p15, 1, r10, c9, c0, 2 @ write the L2 cache aux ctrl register
#endif
b 3f
/* Cortex-A9 Errata */
2: ldr r10, =0x00000c09 @ Cortex-A9 primary part number
teq r0, r10
bne 3f
#ifdef CONFIG_ARM_ERRATA_742230
cmp r6, #0x22 @ only present up to r2p2
mrcle p15, 0, r10, c15, c0, 1 @ read diagnostic register
orrle r10, r10, #1 << 4 @ set bit #4
mcrle p15, 0, r10, c15, c0, 1 @ write diagnostic register
#endif
#ifdef CONFIG_ARM_ERRATA_742231
teq r6, #0x20 @ present in r2p0
teqne r6, #0x21 @ present in r2p1
teqne r6, #0x22 @ present in r2p2
mrceq p15, 0, r10, c15, c0, 1 @ read diagnostic register
orreq r10, r10, #1 << 12 @ set bit #12
orreq r10, r10, #1 << 22 @ set bit #22
mcreq p15, 0, r10, c15, c0, 1 @ write diagnostic register
#endif
#ifdef CONFIG_ARM_ERRATA_743622
teq r5, #0x00200000 @ only present in r2p*
mrceq p15, 0, r10, c15, c0, 1 @ read diagnostic register
orreq r10, r10, #1 << 6 @ set bit #6
mcreq p15, 0, r10, c15, c0, 1 @ write diagnostic register
#endif
#if defined(CONFIG_ARM_ERRATA_751472) && defined(CONFIG_SMP)
ALT_SMP(cmp r6, #0x30) @ present prior to r3p0
ALT_UP_B(1f)
mrclt p15, 0, r10, c15, c0, 1 @ read diagnostic register
orrlt r10, r10, #1 << 11 @ set bit #11
mcrlt p15, 0, r10, c15, c0, 1 @ write diagnostic register
1:
#endif
3: mov r10, #0
mcr p15, 0, r10, c7, c5, 0 @ I+BTB cache invalidate
dsb
#ifdef CONFIG_MMU
mcr p15, 0, r10, c8, c7, 0 @ invalidate I + D TLBs
v7_ttb_setup r10, r4, r8, r5 @ TTBCR, TTBRx setup
ldr r5, =PRRR @ PRRR
ldr r6, =NMRR @ NMRR
mcr p15, 0, r5, c10, c2, 0 @ write PRRR
mcr p15, 0, r6, c10, c2, 1 @ write NMRR
#endif
#ifndef CONFIG_ARM_THUMBEE
mrc p15, 0, r0, c0, c1, 0 @ read ID_PFR0 for ThumbEE
and r0, r0, #(0xf << 12) @ ThumbEE enabled field
teq r0, #(1 << 12) @ check if ThumbEE is present
bne 1f
mov r5, #0
mcr p14, 6, r5, c1, c0, 0 @ Initialize TEEHBR to 0
mrc p14, 6, r0, c0, c0, 0 @ load TEECR
orr r0, r0, #1 @ set the 1st bit in order to
mcr p14, 6, r0, c0, c0, 0 @ stop userspace TEEHBR access
1:
#endif
adr r5, v7_crval
ldmia r5, {r5, r6}
#ifdef CONFIG_CPU_ENDIAN_BE8
orr r6, r6, #1 << 25 @ big-endian page tables
#endif
#ifdef CONFIG_SWP_EMULATE
orr r5, r5, #(1 << 10) @ set SW bit in "clear"
bic r6, r6, #(1 << 10) @ clear it in "mmuset"
#endif
mrc p15, 0, r0, c1, c0, 0 @ read control register
bic r0, r0, r5 @ clear bits them
orr r0, r0, r6 @ set them
THUMB( orr r0, r0, #1 << 30 ) @ Thumb exceptions
mov pc, lr @ return to head.S:__ret
ENDPROC(__v7_setup)
.align 2
__v7_setup_stack:
.space 4 * 11 @ 11 registers
__INITDATA
@ define struct processor (see <asm/proc-fns.h> and proc-macros.S)
define_processor_functions v7, dabort=v7_early_abort, pabort=v7_pabort, suspend=1
.section ".rodata"
string cpu_arch_name, "armv7"
string cpu_elf_name, "v7"
.align
.section ".proc.info.init", #alloc, #execinstr
/*
* Standard v7 proc info content
*/
.macro __v7_proc initfunc, mm_mmuflags = 0, io_mmuflags = 0, hwcaps = 0
ALT_SMP(.long PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_SECT_AP_READ | \
PMD_SECT_AF | PMD_FLAGS_SMP | \mm_mmuflags)
ALT_UP(.long PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_SECT_AP_READ | \
PMD_SECT_AF | PMD_FLAGS_UP | \mm_mmuflags)
.long PMD_TYPE_SECT | PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ | PMD_SECT_AF | \io_mmuflags
W(b) \initfunc
.long cpu_arch_name
.long cpu_elf_name
.long HWCAP_SWP | HWCAP_HALF | HWCAP_THUMB | HWCAP_FAST_MULT | \
HWCAP_EDSP | HWCAP_TLS | \hwcaps
.long cpu_v7_name
.long v7_processor_functions
.long v7wbi_tlb_fns
.long v6_user_fns
.long v7_cache_fns
.endm
#ifndef CONFIG_ARM_LPAE
/*
* ARM Ltd. Cortex A5 processor.
*/
.type __v7_ca5mp_proc_info, #object
__v7_ca5mp_proc_info:
.long 0x410fc050
.long 0xff0ffff0
__v7_proc __v7_ca5mp_setup
.size __v7_ca5mp_proc_info, . - __v7_ca5mp_proc_info
/*
* ARM Ltd. Cortex A9 processor.
*/
.type __v7_ca9mp_proc_info, #object
__v7_ca9mp_proc_info:
.long 0x410fc090
.long 0xff0ffff0
__v7_proc __v7_ca9mp_setup
.size __v7_ca9mp_proc_info, . - __v7_ca9mp_proc_info
#endif /* CONFIG_ARM_LPAE */
/*
* ARM Ltd. Cortex A7 processor.
*/
.type __v7_ca7mp_proc_info, #object
__v7_ca7mp_proc_info:
.long 0x410fc070
.long 0xff0ffff0
__v7_proc __v7_ca7mp_setup, hwcaps = HWCAP_IDIV
.size __v7_ca7mp_proc_info, . - __v7_ca7mp_proc_info
/*
* ARM Ltd. Cortex A15 processor.
*/
.type __v7_ca15mp_proc_info, #object
__v7_ca15mp_proc_info:
.long 0x410fc0f0
.long 0xff0ffff0
__v7_proc __v7_ca15mp_setup, hwcaps = HWCAP_IDIV
.size __v7_ca15mp_proc_info, . - __v7_ca15mp_proc_info
/*
* Match any ARMv7 processor core.
*/
.type __v7_proc_info, #object
__v7_proc_info:
.long 0x000f0000 @ Required ID value
.long 0x000f0000 @ Mask for ID
__v7_proc __v7_setup
.size __v7_proc_info, . - __v7_proc_info
Reference in New Issue View Git Blame Copy Permalink