Minki/linux
1
0
Fork 1
mirror of https://github.com/torvalds/linux.git synced 2024-12-25 20:32:22 +00:00
Code Issues Packages Projects Releases Wiki Activity
bc2c39b562
linux/arch/mips/alchemy/common/usb.c
Paul Gortmaker 26dd3e4ff9 MIPS: Audit and remove any unnecessary uses of module.h 
Historically a lot of these existed because we did not have
a distinction between what was modular code and what was providing
support to modules via EXPORT_SYMBOL and friends.  That changed
when we forked out support for the latter into the export.h file.

This means we should be able to reduce the usage of module.h
in code that is obj-y Makefile or bool Kconfig.  In the case of
some code where it is modular, we can extend that to also include
files that are building basic support functionality but not related
to loading or registering the final module; such files also have
no need whatsoever for module.h

The advantage in removing such instances is that module.h itself
sources about 15 other headers; adding significantly to what we feed
cpp, and it can obscure what headers we are effectively using.

Since module.h might have been the implicit source for init.h
(for __init) and for export.h (for EXPORT_SYMBOL) we consider each
instance for the presence of either and replace/add as needed.

Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code.

Build coverage of all the mips defconfigs revealed the module.h
header was masking a couple of implicit include instances, so
we add the appropriate headers there.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: David Daney <david.daney@cavium.com>
Cc: John Crispin <john@phrozen.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: "Steven J. Hill" <steven.hill@cavium.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/15131/
[james.hogan@imgtec.com: Preserve sort order where it already exists]
Signed-off-by: James Hogan <james.hogan@imgtec.com>
2017-02-14 09:00:25 +00:00

627 lines
15 KiB
C
Raw Blame History

/*
* USB block power/access management abstraction.
*
* Au1000+: The OHCI block control register is at the far end of the OHCI memory
* area. Au1550 has OHCI on different base address. No need to handle
* UDC here.
* Au1200: one register to control access and clocks to O/EHCI, UDC and OTG
* as well as the PHY for EHCI and UDC.
*
*/
#include <linux/clk.h>
#include <linux/export.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/spinlock.h>
#include <linux/syscore_ops.h>
#include <asm/cpu.h>
#include <asm/mach-au1x00/au1000.h>
/* control register offsets */
#define AU1000_OHCICFG 0x7fffc
#define AU1550_OHCICFG 0x07ffc
#define AU1200_USBCFG 0x04
/* Au1000 USB block config bits */
#define USBHEN_RD (1 << 4) /* OHCI reset-done indicator */
#define USBHEN_CE (1 << 3) /* OHCI block clock enable */
#define USBHEN_E (1 << 2) /* OHCI block enable */
#define USBHEN_C (1 << 1) /* OHCI block coherency bit */
#define USBHEN_BE (1 << 0) /* OHCI Big-Endian */
/* Au1200 USB config bits */
#define USBCFG_PFEN (1 << 31) /* prefetch enable (undoc) */
#define USBCFG_RDCOMB (1 << 30) /* read combining (undoc) */
#define USBCFG_UNKNOWN (5 << 20) /* unknown, leave this way */
#define USBCFG_SSD (1 << 23) /* serial short detect en */
#define USBCFG_PPE (1 << 19) /* HS PHY PLL */
#define USBCFG_UCE (1 << 18) /* UDC clock enable */
#define USBCFG_ECE (1 << 17) /* EHCI clock enable */
#define USBCFG_OCE (1 << 16) /* OHCI clock enable */
#define USBCFG_FLA(x) (((x) & 0x3f) << 8)
#define USBCFG_UCAM (1 << 7) /* coherent access (undoc) */
#define USBCFG_GME (1 << 6) /* OTG mem access */
#define USBCFG_DBE (1 << 5) /* UDC busmaster enable */
#define USBCFG_DME (1 << 4) /* UDC mem enable */
#define USBCFG_EBE (1 << 3) /* EHCI busmaster enable */
#define USBCFG_EME (1 << 2) /* EHCI mem enable */
#define USBCFG_OBE (1 << 1) /* OHCI busmaster enable */
#define USBCFG_OME (1 << 0) /* OHCI mem enable */
#define USBCFG_INIT_AU1200 (USBCFG_PFEN | USBCFG_RDCOMB | USBCFG_UNKNOWN |\
USBCFG_SSD | USBCFG_FLA(0x20) | USBCFG_UCAM | \
USBCFG_GME | USBCFG_DBE | USBCFG_DME | \
USBCFG_EBE | USBCFG_EME | USBCFG_OBE | \
USBCFG_OME)
/* Au1300 USB config registers */
#define USB_DWC_CTRL1 0x00
#define USB_DWC_CTRL2 0x04
#define USB_VBUS_TIMER 0x10
#define USB_SBUS_CTRL 0x14
#define USB_MSR_ERR 0x18
#define USB_DWC_CTRL3 0x1C
#define USB_DWC_CTRL4 0x20
#define USB_OTG_STATUS 0x28
#define USB_DWC_CTRL5 0x2C
#define USB_DWC_CTRL6 0x30
#define USB_DWC_CTRL7 0x34
#define USB_PHY_STATUS 0xC0
#define USB_INT_STATUS 0xC4
#define USB_INT_ENABLE 0xC8
#define USB_DWC_CTRL1_OTGD 0x04 /* set to DISable OTG */
#define USB_DWC_CTRL1_HSTRS 0x02 /* set to ENable EHCI */
#define USB_DWC_CTRL1_DCRS 0x01 /* set to ENable UDC */
#define USB_DWC_CTRL2_PHY1RS 0x04 /* set to enable PHY1 */
#define USB_DWC_CTRL2_PHY0RS 0x02 /* set to enable PHY0 */
#define USB_DWC_CTRL2_PHYRS 0x01 /* set to enable PHY */
#define USB_DWC_CTRL3_OHCI1_CKEN (1 << 19)
#define USB_DWC_CTRL3_OHCI0_CKEN (1 << 18)
#define USB_DWC_CTRL3_EHCI0_CKEN (1 << 17)
#define USB_DWC_CTRL3_OTG0_CKEN (1 << 16)
#define USB_SBUS_CTRL_SBCA 0x04 /* coherent access */
#define USB_INTEN_FORCE 0x20
#define USB_INTEN_PHY 0x10
#define USB_INTEN_UDC 0x08
#define USB_INTEN_EHCI 0x04
#define USB_INTEN_OHCI1 0x02
#define USB_INTEN_OHCI0 0x01
static DEFINE_SPINLOCK(alchemy_usb_lock);
static inline void __au1300_usb_phyctl(void __iomem *base, int enable)
{
unsigned long r, s;
r = __raw_readl(base + USB_DWC_CTRL2);
s = __raw_readl(base + USB_DWC_CTRL3);
s &= USB_DWC_CTRL3_OHCI1_CKEN | USB_DWC_CTRL3_OHCI0_CKEN |
USB_DWC_CTRL3_EHCI0_CKEN | USB_DWC_CTRL3_OTG0_CKEN;
if (enable) {
/* simply enable all PHYs */
r |= USB_DWC_CTRL2_PHY1RS | USB_DWC_CTRL2_PHY0RS |
USB_DWC_CTRL2_PHYRS;
__raw_writel(r, base + USB_DWC_CTRL2);
wmb();
} else if (!s) {
/* no USB block active, do disable all PHYs */
r &= ~(USB_DWC_CTRL2_PHY1RS | USB_DWC_CTRL2_PHY0RS |
USB_DWC_CTRL2_PHYRS);
__raw_writel(r, base + USB_DWC_CTRL2);
wmb();
}
}
static inline void __au1300_ohci_control(void __iomem *base, int enable, int id)
{
unsigned long r;
if (enable) {
__raw_writel(1, base + USB_DWC_CTRL7); /* start OHCI clock */
wmb();
r = __raw_readl(base + USB_DWC_CTRL3); /* enable OHCI block */
r |= (id == 0) ? USB_DWC_CTRL3_OHCI0_CKEN
: USB_DWC_CTRL3_OHCI1_CKEN;
__raw_writel(r, base + USB_DWC_CTRL3);
wmb();
__au1300_usb_phyctl(base, enable); /* power up the PHYs */
r = __raw_readl(base + USB_INT_ENABLE);
r |= (id == 0) ? USB_INTEN_OHCI0 : USB_INTEN_OHCI1;
__raw_writel(r, base + USB_INT_ENABLE);
wmb();
/* reset the OHCI start clock bit */
__raw_writel(0, base + USB_DWC_CTRL7);
wmb();
} else {
r = __raw_readl(base + USB_INT_ENABLE);
r &= ~((id == 0) ? USB_INTEN_OHCI0 : USB_INTEN_OHCI1);
__raw_writel(r, base + USB_INT_ENABLE);
wmb();
r = __raw_readl(base + USB_DWC_CTRL3);
r &= ~((id == 0) ? USB_DWC_CTRL3_OHCI0_CKEN
: USB_DWC_CTRL3_OHCI1_CKEN);
__raw_writel(r, base + USB_DWC_CTRL3);
wmb();
__au1300_usb_phyctl(base, enable);
}
}
static inline void __au1300_ehci_control(void __iomem *base, int enable)
{
unsigned long r;
if (enable) {
r = __raw_readl(base + USB_DWC_CTRL3);
r |= USB_DWC_CTRL3_EHCI0_CKEN;
__raw_writel(r, base + USB_DWC_CTRL3);
wmb();
r = __raw_readl(base + USB_DWC_CTRL1);
r |= USB_DWC_CTRL1_HSTRS;
__raw_writel(r, base + USB_DWC_CTRL1);
wmb();
__au1300_usb_phyctl(base, enable);
r = __raw_readl(base + USB_INT_ENABLE);
r |= USB_INTEN_EHCI;
__raw_writel(r, base + USB_INT_ENABLE);
wmb();
} else {
r = __raw_readl(base + USB_INT_ENABLE);
r &= ~USB_INTEN_EHCI;
__raw_writel(r, base + USB_INT_ENABLE);
wmb();
r = __raw_readl(base + USB_DWC_CTRL1);
r &= ~USB_DWC_CTRL1_HSTRS;
__raw_writel(r, base + USB_DWC_CTRL1);
wmb();
r = __raw_readl(base + USB_DWC_CTRL3);
r &= ~USB_DWC_CTRL3_EHCI0_CKEN;
__raw_writel(r, base + USB_DWC_CTRL3);
wmb();
__au1300_usb_phyctl(base, enable);
}
}
static inline void __au1300_udc_control(void __iomem *base, int enable)
{
unsigned long r;
if (enable) {
r = __raw_readl(base + USB_DWC_CTRL1);
r |= USB_DWC_CTRL1_DCRS;
__raw_writel(r, base + USB_DWC_CTRL1);
wmb();
__au1300_usb_phyctl(base, enable);
r = __raw_readl(base + USB_INT_ENABLE);
r |= USB_INTEN_UDC;
__raw_writel(r, base + USB_INT_ENABLE);
wmb();
} else {
r = __raw_readl(base + USB_INT_ENABLE);
r &= ~USB_INTEN_UDC;
__raw_writel(r, base + USB_INT_ENABLE);
wmb();
r = __raw_readl(base + USB_DWC_CTRL1);
r &= ~USB_DWC_CTRL1_DCRS;
__raw_writel(r, base + USB_DWC_CTRL1);
wmb();
__au1300_usb_phyctl(base, enable);
}
}
static inline void __au1300_otg_control(void __iomem *base, int enable)
{
unsigned long r;
if (enable) {
r = __raw_readl(base + USB_DWC_CTRL3);
r |= USB_DWC_CTRL3_OTG0_CKEN;
__raw_writel(r, base + USB_DWC_CTRL3);
wmb();
r = __raw_readl(base + USB_DWC_CTRL1);
r &= ~USB_DWC_CTRL1_OTGD;
__raw_writel(r, base + USB_DWC_CTRL1);
wmb();
__au1300_usb_phyctl(base, enable);
} else {
r = __raw_readl(base + USB_DWC_CTRL1);
r |= USB_DWC_CTRL1_OTGD;
__raw_writel(r, base + USB_DWC_CTRL1);
wmb();
r = __raw_readl(base + USB_DWC_CTRL3);
r &= ~USB_DWC_CTRL3_OTG0_CKEN;
__raw_writel(r, base + USB_DWC_CTRL3);
wmb();
__au1300_usb_phyctl(base, enable);
}
}
static inline int au1300_usb_control(int block, int enable)
{
void __iomem *base =
(void __iomem *)KSEG1ADDR(AU1300_USB_CTL_PHYS_ADDR);
int ret = 0;
switch (block) {
case ALCHEMY_USB_OHCI0:
__au1300_ohci_control(base, enable, 0);
break;
case ALCHEMY_USB_OHCI1:
__au1300_ohci_control(base, enable, 1);
break;
case ALCHEMY_USB_EHCI0:
__au1300_ehci_control(base, enable);
break;
case ALCHEMY_USB_UDC0:
__au1300_udc_control(base, enable);
break;
case ALCHEMY_USB_OTG0:
__au1300_otg_control(base, enable);
break;
default:
ret = -ENODEV;
}
return ret;
}
static inline void au1300_usb_init(void)
{
void __iomem *base =
(void __iomem *)KSEG1ADDR(AU1300_USB_CTL_PHYS_ADDR);
/* set some sane defaults. Note: we don't fiddle with DWC_CTRL4
* here at all: Port 2 routing (EHCI or UDC) must be set either
* by boot firmware or platform init code; I can't autodetect
* a sane setting.
*/
__raw_writel(0, base + USB_INT_ENABLE); /* disable all USB irqs */
wmb();
__raw_writel(0, base + USB_DWC_CTRL3); /* disable all clocks */
wmb();
__raw_writel(~0, base + USB_MSR_ERR); /* clear all errors */
wmb();
__raw_writel(~0, base + USB_INT_STATUS); /* clear int status */
wmb();
/* set coherent access bit */
__raw_writel(USB_SBUS_CTRL_SBCA, base + USB_SBUS_CTRL);
wmb();
}
static inline void __au1200_ohci_control(void __iomem *base, int enable)
{
unsigned long r = __raw_readl(base + AU1200_USBCFG);
if (enable) {
__raw_writel(r | USBCFG_OCE, base + AU1200_USBCFG);
wmb();
udelay(2000);
} else {
__raw_writel(r & ~USBCFG_OCE, base + AU1200_USBCFG);
wmb();
udelay(1000);
}
}
static inline void __au1200_ehci_control(void __iomem *base, int enable)
{
unsigned long r = __raw_readl(base + AU1200_USBCFG);
if (enable) {
__raw_writel(r | USBCFG_ECE | USBCFG_PPE, base + AU1200_USBCFG);
wmb();
udelay(1000);
} else {
if (!(r & USBCFG_UCE)) /* UDC also off? */
r &= ~USBCFG_PPE; /* yes: disable HS PHY PLL */
__raw_writel(r & ~USBCFG_ECE, base + AU1200_USBCFG);
wmb();
udelay(1000);
}
}
static inline void __au1200_udc_control(void __iomem *base, int enable)
{
unsigned long r = __raw_readl(base + AU1200_USBCFG);
if (enable) {
__raw_writel(r | USBCFG_UCE | USBCFG_PPE, base + AU1200_USBCFG);
wmb();
} else {
if (!(r & USBCFG_ECE)) /* EHCI also off? */
r &= ~USBCFG_PPE; /* yes: disable HS PHY PLL */
__raw_writel(r & ~USBCFG_UCE, base + AU1200_USBCFG);
wmb();
}
}
static inline int au1200_usb_control(int block, int enable)
{
void __iomem *base =
(void __iomem *)KSEG1ADDR(AU1200_USB_CTL_PHYS_ADDR);
switch (block) {
case ALCHEMY_USB_OHCI0:
__au1200_ohci_control(base, enable);
break;
case ALCHEMY_USB_UDC0:
__au1200_udc_control(base, enable);
break;
case ALCHEMY_USB_EHCI0:
__au1200_ehci_control(base, enable);
break;
default:
return -ENODEV;
}
return 0;
}
/* initialize USB block(s) to a known working state */
static inline void au1200_usb_init(void)
{
void __iomem *base =
(void __iomem *)KSEG1ADDR(AU1200_USB_CTL_PHYS_ADDR);
__raw_writel(USBCFG_INIT_AU1200, base + AU1200_USBCFG);
wmb();
udelay(1000);
}
static inline int au1000_usb_init(unsigned long rb, int reg)
{
void __iomem *base = (void __iomem *)KSEG1ADDR(rb + reg);
unsigned long r = __raw_readl(base);
struct clk *c;
/* 48MHz check. Don't init if no one can provide it */
c = clk_get(NULL, "usbh_clk");
if (IS_ERR(c))
return -ENODEV;
if (clk_round_rate(c, 48000000) != 48000000) {
clk_put(c);
return -ENODEV;
}
if (clk_set_rate(c, 48000000)) {
clk_put(c);
return -ENODEV;
}
clk_put(c);
#if defined(__BIG_ENDIAN)
r |= USBHEN_BE;
#endif
r |= USBHEN_C;
__raw_writel(r, base);
wmb();
udelay(1000);
return 0;
}
static inline void __au1xx0_ohci_control(int enable, unsigned long rb, int creg)
{
void __iomem *base = (void __iomem *)KSEG1ADDR(rb);
unsigned long r = __raw_readl(base + creg);
struct clk *c = clk_get(NULL, "usbh_clk");
if (IS_ERR(c))
return;
if (enable) {
if (clk_prepare_enable(c))
goto out;
__raw_writel(r | USBHEN_CE, base + creg);
wmb();
udelay(1000);
__raw_writel(r | USBHEN_CE | USBHEN_E, base + creg);
wmb();
udelay(1000);
/* wait for reset complete (read reg twice: au1500 erratum) */
while (__raw_readl(base + creg),
!(__raw_readl(base + creg) & USBHEN_RD))
udelay(1000);
} else {
__raw_writel(r & ~(USBHEN_CE | USBHEN_E), base + creg);
wmb();
clk_disable_unprepare(c);
}
out:
clk_put(c);
}
static inline int au1000_usb_control(int block, int enable, unsigned long rb,
int creg)
{
int ret = 0;
switch (block) {
case ALCHEMY_USB_OHCI0:
__au1xx0_ohci_control(enable, rb, creg);
break;
default:
ret = -ENODEV;
}
return ret;
}
/*
* alchemy_usb_control - control Alchemy on-chip USB blocks
* @block: USB block to target
* @enable: set 1 to enable a block, 0 to disable
*/
int alchemy_usb_control(int block, int enable)
{
unsigned long flags;
int ret;
spin_lock_irqsave(&alchemy_usb_lock, flags);
switch (alchemy_get_cputype()) {
case ALCHEMY_CPU_AU1000:
case ALCHEMY_CPU_AU1500:
case ALCHEMY_CPU_AU1100:
ret = au1000_usb_control(block, enable,
AU1000_USB_OHCI_PHYS_ADDR, AU1000_OHCICFG);
break;
case ALCHEMY_CPU_AU1550:
ret = au1000_usb_control(block, enable,
AU1550_USB_OHCI_PHYS_ADDR, AU1550_OHCICFG);
break;
case ALCHEMY_CPU_AU1200:
ret = au1200_usb_control(block, enable);
break;
case ALCHEMY_CPU_AU1300:
ret = au1300_usb_control(block, enable);
break;
default:
ret = -ENODEV;
}
spin_unlock_irqrestore(&alchemy_usb_lock, flags);
return ret;
}
EXPORT_SYMBOL_GPL(alchemy_usb_control);
static unsigned long alchemy_usb_pmdata[2];
static void au1000_usb_pm(unsigned long br, int creg, int susp)
{
void __iomem *base = (void __iomem *)KSEG1ADDR(br);
if (susp) {
alchemy_usb_pmdata[0] = __raw_readl(base + creg);
/* There appears to be some undocumented reset register.... */
__raw_writel(0, base + 0x04);
wmb();
__raw_writel(0, base + creg);
wmb();
} else {
__raw_writel(alchemy_usb_pmdata[0], base + creg);
wmb();
}
}
static void au1200_usb_pm(int susp)
{
void __iomem *base =
(void __iomem *)KSEG1ADDR(AU1200_USB_OTG_PHYS_ADDR);
if (susp) {
/* save OTG_CAP/MUX registers which indicate port routing */
/* FIXME: write an OTG driver to do that */
alchemy_usb_pmdata[0] = __raw_readl(base + 0x00);
alchemy_usb_pmdata[1] = __raw_readl(base + 0x04);
} else {
/* restore access to all MMIO areas */
au1200_usb_init();
/* restore OTG_CAP/MUX registers */
__raw_writel(alchemy_usb_pmdata[0], base + 0x00);
__raw_writel(alchemy_usb_pmdata[1], base + 0x04);
wmb();
}
}
static void au1300_usb_pm(int susp)
{
void __iomem *base =
(void __iomem *)KSEG1ADDR(AU1300_USB_CTL_PHYS_ADDR);
/* remember Port2 routing */
if (susp) {
alchemy_usb_pmdata[0] = __raw_readl(base + USB_DWC_CTRL4);
} else {
au1300_usb_init();
__raw_writel(alchemy_usb_pmdata[0], base + USB_DWC_CTRL4);
wmb();
}
}
static void alchemy_usb_pm(int susp)
{
switch (alchemy_get_cputype()) {
case ALCHEMY_CPU_AU1000:
case ALCHEMY_CPU_AU1500:
case ALCHEMY_CPU_AU1100:
au1000_usb_pm(AU1000_USB_OHCI_PHYS_ADDR, AU1000_OHCICFG, susp);
break;
case ALCHEMY_CPU_AU1550:
au1000_usb_pm(AU1550_USB_OHCI_PHYS_ADDR, AU1550_OHCICFG, susp);
break;
case ALCHEMY_CPU_AU1200:
au1200_usb_pm(susp);
break;
case ALCHEMY_CPU_AU1300:
au1300_usb_pm(susp);
break;
}
}
static int alchemy_usb_suspend(void)
{
alchemy_usb_pm(1);
return 0;
}
static void alchemy_usb_resume(void)
{
alchemy_usb_pm(0);
}
static struct syscore_ops alchemy_usb_pm_ops = {
.suspend = alchemy_usb_suspend,
.resume = alchemy_usb_resume,
};
static int __init alchemy_usb_init(void)
{
int ret = 0;
switch (alchemy_get_cputype()) {
case ALCHEMY_CPU_AU1000:
case ALCHEMY_CPU_AU1500:
case ALCHEMY_CPU_AU1100:
ret = au1000_usb_init(AU1000_USB_OHCI_PHYS_ADDR,
AU1000_OHCICFG);
break;
case ALCHEMY_CPU_AU1550:
ret = au1000_usb_init(AU1550_USB_OHCI_PHYS_ADDR,
AU1550_OHCICFG);
break;
case ALCHEMY_CPU_AU1200:
au1200_usb_init();
break;
case ALCHEMY_CPU_AU1300:
au1300_usb_init();
break;
}
if (!ret)
register_syscore_ops(&alchemy_usb_pm_ops);
return ret;
}
arch_initcall(alchemy_usb_init);
Reference in New Issue View Git Blame Copy Permalink