mirror of
https://github.com/torvalds/linux.git
synced 2024-12-24 20:01:55 +00:00
38f539a608
1. add common GPIO handling code into [arch/arm/plat-pxa]
2. common code in <mach/gpio.h> moved into <plat/gpio.h>, new processors
should implement its own <mach/gpio.h>, provide the following required
definitions and '#include <plat/gpio.h>' in the end:
- GPIO_REGS_VIRT for mapped virtual address of the GPIO registers'
physical I/O memory
- macros of GPLR(), GPSR(), GPDR() for constant optimization for
functions gpio_{set,get}_value() (so that bit-bang code can still
have tolerable performance)
- NR_BUILTIN_GPIO for the number of onchip GPIO
- definitions of __gpio_is_inverted() and __gpio_is_occupied(), they
can be either macros or inlined functions
Signed-off-by: Eric Miao <eric.miao@marvell.com>
63 lines
1.9 KiB
C
63 lines
1.9 KiB
C
#ifndef __PLAT_GPIO_H
|
|
#define __PLAT_GPIO_H
|
|
|
|
/*
|
|
* We handle the GPIOs by banks, each bank covers up to 32 GPIOs with
|
|
* one set of registers. The register offsets are organized below:
|
|
*
|
|
* GPLR GPDR GPSR GPCR GRER GFER GEDR
|
|
* BANK 0 - 0x0000 0x000C 0x0018 0x0024 0x0030 0x003C 0x0048
|
|
* BANK 1 - 0x0004 0x0010 0x001C 0x0028 0x0034 0x0040 0x004C
|
|
* BANK 2 - 0x0008 0x0014 0x0020 0x002C 0x0038 0x0044 0x0050
|
|
*
|
|
* BANK 3 - 0x0100 0x010C 0x0118 0x0124 0x0130 0x013C 0x0148
|
|
* BANK 4 - 0x0104 0x0110 0x011C 0x0128 0x0134 0x0140 0x014C
|
|
* BANK 5 - 0x0108 0x0114 0x0120 0x012C 0x0138 0x0144 0x0150
|
|
*
|
|
* NOTE:
|
|
* BANK 3 is only available on PXA27x and later processors.
|
|
* BANK 4 and 5 are only available on PXA935
|
|
*/
|
|
|
|
#define GPIO_BANK(n) (GPIO_REGS_VIRT + BANK_OFF(n))
|
|
|
|
#define GPLR_OFFSET 0x00
|
|
#define GPDR_OFFSET 0x0C
|
|
#define GPSR_OFFSET 0x18
|
|
#define GPCR_OFFSET 0x24
|
|
#define GRER_OFFSET 0x30
|
|
#define GFER_OFFSET 0x3C
|
|
#define GEDR_OFFSET 0x48
|
|
|
|
static inline int gpio_get_value(unsigned gpio)
|
|
{
|
|
if (__builtin_constant_p(gpio) && (gpio < NR_BUILTIN_GPIO))
|
|
return GPLR(gpio) & GPIO_bit(gpio);
|
|
else
|
|
return __gpio_get_value(gpio);
|
|
}
|
|
|
|
static inline void gpio_set_value(unsigned gpio, int value)
|
|
{
|
|
if (__builtin_constant_p(gpio) && (gpio < NR_BUILTIN_GPIO)) {
|
|
if (value)
|
|
GPSR(gpio) = GPIO_bit(gpio);
|
|
else
|
|
GPCR(gpio) = GPIO_bit(gpio);
|
|
} else
|
|
__gpio_set_value(gpio, value);
|
|
}
|
|
|
|
#define gpio_cansleep __gpio_cansleep
|
|
|
|
/* NOTE: some PXAs have fewer on-chip GPIOs (like PXA255, with 85).
|
|
* Those cases currently cause holes in the GPIO number space, the
|
|
* actual number of the last GPIO is recorded by 'pxa_last_gpio'.
|
|
*/
|
|
extern int pxa_last_gpio;
|
|
|
|
typedef int (*set_wake_t)(unsigned int irq, unsigned int on);
|
|
|
|
extern void pxa_init_gpio(int mux_irq, int start, int end, set_wake_t fn);
|
|
#endif /* __PLAT_GPIO_H */
|