Minki/linux
1
0
Fork 1
mirror of https://github.com/torvalds/linux.git synced 2024-12-29 06:12:08 +00:00
Code Issues Packages Projects Releases Wiki Activity
b962f1bb11
linux/arch/arm/include/asm/assembler.h
Will Deacon d675d0bc47 ARM: LPAE: add ISBs around MMU enabling code 
Before we enable the MMU, we must ensure that the TTBR registers contain
sane values. After the MMU has been enabled, we jump to the *virtual*
address of the following function, so we also need to ensure that the
SCTLR write has taken effect.

This patch adds ISB instructions around the SCTLR write to ensure the
visibility of the above.

Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2011-12-08 10:30:38 +00:00

317 lines
6.6 KiB
C
Raw Blame History

/*
* arch/arm/include/asm/assembler.h
*
* Copyright (C) 1996-2000 Russell King
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This file contains arm architecture specific defines
* for the different processors.
*
* Do not include any C declarations in this file - it is included by
* assembler source.
*/
#ifndef __ASM_ASSEMBLER_H__
#define __ASM_ASSEMBLER_H__
#ifndef __ASSEMBLY__
#error "Only include this from assembly code"
#endif
#include <asm/ptrace.h>
#include <asm/domain.h>
/*
* Endian independent macros for shifting bytes within registers.
*/
#ifndef __ARMEB__
#define pull lsr
#define push lsl
#define get_byte_0 lsl #0
#define get_byte_1 lsr #8
#define get_byte_2 lsr #16
#define get_byte_3 lsr #24
#define put_byte_0 lsl #0
#define put_byte_1 lsl #8
#define put_byte_2 lsl #16
#define put_byte_3 lsl #24
#else
#define pull lsl
#define push lsr
#define get_byte_0 lsr #24
#define get_byte_1 lsr #16
#define get_byte_2 lsr #8
#define get_byte_3 lsl #0
#define put_byte_0 lsl #24
#define put_byte_1 lsl #16
#define put_byte_2 lsl #8
#define put_byte_3 lsl #0
#endif
/*
* Data preload for architectures that support it
*/
#if __LINUX_ARM_ARCH__ >= 5
#define PLD(code...) code
#else
#define PLD(code...)
#endif
/*
* This can be used to enable code to cacheline align the destination
* pointer when bulk writing to memory. Experiments on StrongARM and
* XScale didn't show this a worthwhile thing to do when the cache is not
* set to write-allocate (this would need further testing on XScale when WA
* is used).
*
* On Feroceon there is much to gain however, regardless of cache mode.
*/
#ifdef CONFIG_CPU_FEROCEON
#define CALGN(code...) code
#else
#define CALGN(code...)
#endif
/*
* Enable and disable interrupts
*/
#if __LINUX_ARM_ARCH__ >= 6
.macro disable_irq_notrace
cpsid i
.endm
.macro enable_irq_notrace
cpsie i
.endm
#else
.macro disable_irq_notrace
msr cpsr_c, #PSR_I_BIT | SVC_MODE
.endm
.macro enable_irq_notrace
msr cpsr_c, #SVC_MODE
.endm
#endif
.macro asm_trace_hardirqs_off
#if defined(CONFIG_TRACE_IRQFLAGS)
stmdb sp!, {r0-r3, ip, lr}
bl trace_hardirqs_off
ldmia sp!, {r0-r3, ip, lr}
#endif
.endm
.macro asm_trace_hardirqs_on_cond, cond
#if defined(CONFIG_TRACE_IRQFLAGS)
/*
* actually the registers should be pushed and pop'd conditionally, but
* after bl the flags are certainly clobbered
*/
stmdb sp!, {r0-r3, ip, lr}
bl\cond trace_hardirqs_on
ldmia sp!, {r0-r3, ip, lr}
#endif
.endm
.macro asm_trace_hardirqs_on
asm_trace_hardirqs_on_cond al
.endm
.macro disable_irq
disable_irq_notrace
asm_trace_hardirqs_off
.endm
.macro enable_irq
asm_trace_hardirqs_on
enable_irq_notrace
.endm
/*
* Save the current IRQ state and disable IRQs. Note that this macro
* assumes FIQs are enabled, and that the processor is in SVC mode.
*/
.macro save_and_disable_irqs, oldcpsr
mrs \oldcpsr, cpsr
disable_irq
.endm
/*
* Restore interrupt state previously stored in a register. We don't
* guarantee that this will preserve the flags.
*/
.macro restore_irqs_notrace, oldcpsr
msr cpsr_c, \oldcpsr
.endm
.macro restore_irqs, oldcpsr
tst \oldcpsr, #PSR_I_BIT
asm_trace_hardirqs_on_cond eq
restore_irqs_notrace \oldcpsr
.endm
#define USER(x...) \
9999: x; \
.pushsection __ex_table,"a"; \
.align 3; \
.long 9999b,9001f; \
.popsection
#ifdef CONFIG_SMP
#define ALT_SMP(instr...) \
9998: instr
/*
* Note: if you get assembler errors from ALT_UP() when building with
* CONFIG_THUMB2_KERNEL, you almost certainly need to use
* ALT_SMP( W(instr) ... )
*/
#define ALT_UP(instr...) \
.pushsection ".alt.smp.init", "a" ;\
.long 9998b ;\
9997: instr ;\
.if . - 9997b != 4 ;\
.error "ALT_UP() content must assemble to exactly 4 bytes";\
.endif ;\
.popsection
#define ALT_UP_B(label) \
.equ up_b_offset, label - 9998b ;\
.pushsection ".alt.smp.init", "a" ;\
.long 9998b ;\
W(b) . + up_b_offset ;\
.popsection
#else
#define ALT_SMP(instr...)
#define ALT_UP(instr...) instr
#define ALT_UP_B(label) b label
#endif
/*
* Instruction barrier
*/
.macro instr_sync
#if __LINUX_ARM_ARCH__ >= 7
isb
#elif __LINUX_ARM_ARCH__ == 6
mcr p15, 0, r0, c7, c5, 4
#endif
.endm
/*
* SMP data memory barrier
*/
.macro smp_dmb mode
#ifdef CONFIG_SMP
#if __LINUX_ARM_ARCH__ >= 7
.ifeqs "\mode","arm"
ALT_SMP(dmb)
.else
ALT_SMP(W(dmb))
.endif
#elif __LINUX_ARM_ARCH__ == 6
ALT_SMP(mcr p15, 0, r0, c7, c10, 5) @ dmb
#else
#error Incompatible SMP platform
#endif
.ifeqs "\mode","arm"
ALT_UP(nop)
.else
ALT_UP(W(nop))
.endif
#endif
.endm
#ifdef CONFIG_THUMB2_KERNEL
.macro setmode, mode, reg
mov \reg, #\mode
msr cpsr_c, \reg
.endm
#else
.macro setmode, mode, reg
msr cpsr_c, #\mode
.endm
#endif
/*
* STRT/LDRT access macros with ARM and Thumb-2 variants
*/
#ifdef CONFIG_THUMB2_KERNEL
.macro usraccoff, instr, reg, ptr, inc, off, cond, abort, t=T()
9999:
.if \inc == 1
\instr\cond\()b\()\t\().w \reg, [\ptr, #\off]
.elseif \inc == 4
\instr\cond\()\t\().w \reg, [\ptr, #\off]
.else
.error "Unsupported inc macro argument"
.endif
.pushsection __ex_table,"a"
.align 3
.long 9999b, \abort
.popsection
.endm
.macro usracc, instr, reg, ptr, inc, cond, rept, abort
@ explicit IT instruction needed because of the label
@ introduced by the USER macro
.ifnc \cond,al
.if \rept == 1
itt \cond
.elseif \rept == 2
ittt \cond
.else
.error "Unsupported rept macro argument"
.endif
.endif
@ Slightly optimised to avoid incrementing the pointer twice
usraccoff \instr, \reg, \ptr, \inc, 0, \cond, \abort
.if \rept == 2
usraccoff \instr, \reg, \ptr, \inc, \inc, \cond, \abort
.endif
add\cond \ptr, #\rept * \inc
.endm
#else /* !CONFIG_THUMB2_KERNEL */
.macro usracc, instr, reg, ptr, inc, cond, rept, abort, t=T()
.rept \rept
9999:
.if \inc == 1
\instr\cond\()b\()\t \reg, [\ptr], #\inc
.elseif \inc == 4
\instr\cond\()\t \reg, [\ptr], #\inc
.else
.error "Unsupported inc macro argument"
.endif
.pushsection __ex_table,"a"
.align 3
.long 9999b, \abort
.popsection
.endr
.endm
#endif /* CONFIG_THUMB2_KERNEL */
.macro strusr, reg, ptr, inc, cond=al, rept=1, abort=9001f
usracc str, \reg, \ptr, \inc, \cond, \rept, \abort
.endm
.macro ldrusr, reg, ptr, inc, cond=al, rept=1, abort=9001f
usracc ldr, \reg, \ptr, \inc, \cond, \rept, \abort
.endm
/* Utility macro for declaring string literals */
.macro string name:req, string
.type \name , #object
\name:
.asciz "\string"
.size \name , . - \name
.endm
#endif /* __ASM_ASSEMBLER_H__ */
Reference in New Issue View Git Blame Copy Permalink