mirror of
https://github.com/torvalds/linux.git
synced 2024-11-08 21:21:47 +00:00
1da177e4c3
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
218 lines
8.6 KiB
Plaintext
218 lines
8.6 KiB
Plaintext
The PCI Express Port Bus Driver Guide HOWTO
|
|
Tom L Nguyen tom.l.nguyen@intel.com
|
|
11/03/2004
|
|
|
|
1. About this guide
|
|
|
|
This guide describes the basics of the PCI Express Port Bus driver
|
|
and provides information on how to enable the service drivers to
|
|
register/unregister with the PCI Express Port Bus Driver.
|
|
|
|
2. Copyright 2004 Intel Corporation
|
|
|
|
3. What is the PCI Express Port Bus Driver
|
|
|
|
A PCI Express Port is a logical PCI-PCI Bridge structure. There
|
|
are two types of PCI Express Port: the Root Port and the Switch
|
|
Port. The Root Port originates a PCI Express link from a PCI Express
|
|
Root Complex and the Switch Port connects PCI Express links to
|
|
internal logical PCI buses. The Switch Port, which has its secondary
|
|
bus representing the switch's internal routing logic, is called the
|
|
switch's Upstream Port. The switch's Downstream Port is bridging from
|
|
switch's internal routing bus to a bus representing the downstream
|
|
PCI Express link from the PCI Express Switch.
|
|
|
|
A PCI Express Port can provide up to four distinct functions,
|
|
referred to in this document as services, depending on its port type.
|
|
PCI Express Port's services include native hotplug support (HP),
|
|
power management event support (PME), advanced error reporting
|
|
support (AER), and virtual channel support (VC). These services may
|
|
be handled by a single complex driver or be individually distributed
|
|
and handled by corresponding service drivers.
|
|
|
|
4. Why use the PCI Express Port Bus Driver?
|
|
|
|
In existing Linux kernels, the Linux Device Driver Model allows a
|
|
physical device to be handled by only a single driver. The PCI
|
|
Express Port is a PCI-PCI Bridge device with multiple distinct
|
|
services. To maintain a clean and simple solution each service
|
|
may have its own software service driver. In this case several
|
|
service drivers will compete for a single PCI-PCI Bridge device.
|
|
For example, if the PCI Express Root Port native hotplug service
|
|
driver is loaded first, it claims a PCI-PCI Bridge Root Port. The
|
|
kernel therefore does not load other service drivers for that Root
|
|
Port. In other words, it is impossible to have multiple service
|
|
drivers load and run on a PCI-PCI Bridge device simultaneously
|
|
using the current driver model.
|
|
|
|
To enable multiple service drivers running simultaneously requires
|
|
having a PCI Express Port Bus driver, which manages all populated
|
|
PCI Express Ports and distributes all provided service requests
|
|
to the corresponding service drivers as required. Some key
|
|
advantages of using the PCI Express Port Bus driver are listed below:
|
|
|
|
- Allow multiple service drivers to run simultaneously on
|
|
a PCI-PCI Bridge Port device.
|
|
|
|
- Allow service drivers implemented in an independent
|
|
staged approach.
|
|
|
|
- Allow one service driver to run on multiple PCI-PCI Bridge
|
|
Port devices.
|
|
|
|
- Manage and distribute resources of a PCI-PCI Bridge Port
|
|
device to requested service drivers.
|
|
|
|
5. Configuring the PCI Express Port Bus Driver vs. Service Drivers
|
|
|
|
5.1 Including the PCI Express Port Bus Driver Support into the Kernel
|
|
|
|
Including the PCI Express Port Bus driver depends on whether the PCI
|
|
Express support is included in the kernel config. The kernel will
|
|
automatically include the PCI Express Port Bus driver as a kernel
|
|
driver when the PCI Express support is enabled in the kernel.
|
|
|
|
5.2 Enabling Service Driver Support
|
|
|
|
PCI device drivers are implemented based on Linux Device Driver Model.
|
|
All service drivers are PCI device drivers. As discussed above, it is
|
|
impossible to load any service driver once the kernel has loaded the
|
|
PCI Express Port Bus Driver. To meet the PCI Express Port Bus Driver
|
|
Model requires some minimal changes on existing service drivers that
|
|
imposes no impact on the functionality of existing service drivers.
|
|
|
|
A service driver is required to use the two APIs shown below to
|
|
register its service with the PCI Express Port Bus driver (see
|
|
section 5.2.1 & 5.2.2). It is important that a service driver
|
|
initializes the pcie_port_service_driver data structure, included in
|
|
header file /include/linux/pcieport_if.h, before calling these APIs.
|
|
Failure to do so will result an identity mismatch, which prevents
|
|
the PCI Express Port Bus driver from loading a service driver.
|
|
|
|
5.2.1 pcie_port_service_register
|
|
|
|
int pcie_port_service_register(struct pcie_port_service_driver *new)
|
|
|
|
This API replaces the Linux Driver Model's pci_module_init API. A
|
|
service driver should always calls pcie_port_service_register at
|
|
module init. Note that after service driver being loaded, calls
|
|
such as pci_enable_device(dev) and pci_set_master(dev) are no longer
|
|
necessary since these calls are executed by the PCI Port Bus driver.
|
|
|
|
5.2.2 pcie_port_service_unregister
|
|
|
|
void pcie_port_service_unregister(struct pcie_port_service_driver *new)
|
|
|
|
pcie_port_service_unregister replaces the Linux Driver Model's
|
|
pci_unregister_driver. It's always called by service driver when a
|
|
module exits.
|
|
|
|
5.2.3 Sample Code
|
|
|
|
Below is sample service driver code to initialize the port service
|
|
driver data structure.
|
|
|
|
static struct pcie_port_service_id service_id[] = { {
|
|
.vendor = PCI_ANY_ID,
|
|
.device = PCI_ANY_ID,
|
|
.port_type = PCIE_RC_PORT,
|
|
.service_type = PCIE_PORT_SERVICE_AER,
|
|
}, { /* end: all zeroes */ }
|
|
};
|
|
|
|
static struct pcie_port_service_driver root_aerdrv = {
|
|
.name = (char *)device_name,
|
|
.id_table = &service_id[0],
|
|
|
|
.probe = aerdrv_load,
|
|
.remove = aerdrv_unload,
|
|
|
|
.suspend = aerdrv_suspend,
|
|
.resume = aerdrv_resume,
|
|
};
|
|
|
|
Below is a sample code for registering/unregistering a service
|
|
driver.
|
|
|
|
static int __init aerdrv_service_init(void)
|
|
{
|
|
int retval = 0;
|
|
|
|
retval = pcie_port_service_register(&root_aerdrv);
|
|
if (!retval) {
|
|
/*
|
|
* FIX ME
|
|
*/
|
|
}
|
|
return retval;
|
|
}
|
|
|
|
static void __exit aerdrv_service_exit(void)
|
|
{
|
|
pcie_port_service_unregister(&root_aerdrv);
|
|
}
|
|
|
|
module_init(aerdrv_service_init);
|
|
module_exit(aerdrv_service_exit);
|
|
|
|
6. Possible Resource Conflicts
|
|
|
|
Since all service drivers of a PCI-PCI Bridge Port device are
|
|
allowed to run simultaneously, below lists a few of possible resource
|
|
conflicts with proposed solutions.
|
|
|
|
6.1 MSI Vector Resource
|
|
|
|
The MSI capability structure enables a device software driver to call
|
|
pci_enable_msi to request MSI based interrupts. Once MSI interrupts
|
|
are enabled on a device, it stays in this mode until a device driver
|
|
calls pci_disable_msi to disable MSI interrupts and revert back to
|
|
INTx emulation mode. Since service drivers of the same PCI-PCI Bridge
|
|
port share the same physical device, if an individual service driver
|
|
calls pci_enable_msi/pci_disable_msi it may result unpredictable
|
|
behavior. For example, two service drivers run simultaneously on the
|
|
same physical Root Port. Both service drivers call pci_enable_msi to
|
|
request MSI based interrupts. A service driver may not know whether
|
|
any other service drivers have run on this Root Port. If either one
|
|
of them calls pci_disable_msi, it puts the other service driver
|
|
in a wrong interrupt mode.
|
|
|
|
To avoid this situation all service drivers are not permitted to
|
|
switch interrupt mode on its device. The PCI Express Port Bus driver
|
|
is responsible for determining the interrupt mode and this should be
|
|
transparent to service drivers. Service drivers need to know only
|
|
the vector IRQ assigned to the field irq of struct pcie_device, which
|
|
is passed in when the PCI Express Port Bus driver probes each service
|
|
driver. Service drivers should use (struct pcie_device*)dev->irq to
|
|
call request_irq/free_irq. In addition, the interrupt mode is stored
|
|
in the field interrupt_mode of struct pcie_device.
|
|
|
|
6.2 MSI-X Vector Resources
|
|
|
|
Similar to the MSI a device driver for an MSI-X capable device can
|
|
call pci_enable_msix to request MSI-X interrupts. All service drivers
|
|
are not permitted to switch interrupt mode on its device. The PCI
|
|
Express Port Bus driver is responsible for determining the interrupt
|
|
mode and this should be transparent to service drivers. Any attempt
|
|
by service driver to call pci_enable_msix/pci_disable_msix may
|
|
result unpredictable behavior. Service drivers should use
|
|
(struct pcie_device*)dev->irq and call request_irq/free_irq.
|
|
|
|
6.3 PCI Memory/IO Mapped Regions
|
|
|
|
Service drivers for PCI Express Power Management (PME), Advanced
|
|
Error Reporting (AER), Hot-Plug (HP) and Virtual Channel (VC) access
|
|
PCI configuration space on the PCI Express port. In all cases the
|
|
registers accessed are independent of each other. This patch assumes
|
|
that all service drivers will be well behaved and not overwrite
|
|
other service driver's configuration settings.
|
|
|
|
6.4 PCI Config Registers
|
|
|
|
Each service driver runs its PCI config operations on its own
|
|
capability structure except the PCI Express capability structure, in
|
|
which Root Control register and Device Control register are shared
|
|
between PME and AER. This patch assumes that all service drivers
|
|
will be well behaved and not overwrite other service driver's
|
|
configuration settings.
|