mirror of
https://github.com/torvalds/linux.git
synced 2024-11-13 23:51:39 +00:00
eea03c20ae
Commita7a20d1039
("sd: limit the scope of the async probe domain") make the SCSI device probing run device discovery in it's own async domain. However, as a result, the partition detection was no longer synchronized by async_synchronize_full() (which, despite the name, only synchronizes the global async space, not all of them). Which in turn meant that "wait_for_device_probe()" would not wait for the SCSI partitions to be parsed. And "wait_for_device_probe()" was what the boot time init code relied on for mounting the root filesystem. Now, most people never noticed this, because not only is it timing-dependent, but modern distributions all use initrd. So the root filesystem isn't actually on a disk at all. And then before they actually mount the final disk filesystem, they will have loaded the scsi-wait-scan module, which not only does the expected wait_for_device_probe(), but also does scsi_complete_async_scans(). [ Side note: scsi_complete_async_scans() had also been partially broken, but that was fixed in commit43a8d39d01
("fix async probe regression"), so that same commita7a20d1039
had actually broken setups even if you used scsi-wait-scan explicitly ] Solve this problem by just moving the scsi_complete_async_scans() call into wait_for_device_probe(). Everybody who wants to wait for device probing to finish really wants the SCSI probing to complete, so there's no reason not to do this. So now "wait_for_device_probe()" really does what the name implies, and properly waits for device probing to finish. This also removes the now unnecessary extra calls to scsi_complete_async_scans(). Reported-and-tested-by: Artem S. Tashkinov <t.artem@mailcity.com> Cc: Dan Williams <dan.j.williams@gmail.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: James Bottomley <jbottomley@parallels.com> Cc: Borislav Petkov <bp@amd64.org> Cc: linux-scsi <linux-scsi@vger.kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
463 lines
9.7 KiB
C
463 lines
9.7 KiB
C
/*
|
|
* linux/kernel/power/user.c
|
|
*
|
|
* This file provides the user space interface for software suspend/resume.
|
|
*
|
|
* Copyright (C) 2006 Rafael J. Wysocki <rjw@sisk.pl>
|
|
*
|
|
* This file is released under the GPLv2.
|
|
*
|
|
*/
|
|
|
|
#include <linux/suspend.h>
|
|
#include <linux/syscalls.h>
|
|
#include <linux/reboot.h>
|
|
#include <linux/string.h>
|
|
#include <linux/device.h>
|
|
#include <linux/miscdevice.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/swap.h>
|
|
#include <linux/swapops.h>
|
|
#include <linux/pm.h>
|
|
#include <linux/fs.h>
|
|
#include <linux/compat.h>
|
|
#include <linux/console.h>
|
|
#include <linux/cpu.h>
|
|
#include <linux/freezer.h>
|
|
|
|
#include <asm/uaccess.h>
|
|
|
|
#include "power.h"
|
|
|
|
|
|
#define SNAPSHOT_MINOR 231
|
|
|
|
static struct snapshot_data {
|
|
struct snapshot_handle handle;
|
|
int swap;
|
|
int mode;
|
|
char frozen;
|
|
char ready;
|
|
char platform_support;
|
|
} snapshot_state;
|
|
|
|
atomic_t snapshot_device_available = ATOMIC_INIT(1);
|
|
|
|
static int snapshot_open(struct inode *inode, struct file *filp)
|
|
{
|
|
struct snapshot_data *data;
|
|
int error;
|
|
|
|
lock_system_sleep();
|
|
|
|
if (!atomic_add_unless(&snapshot_device_available, -1, 0)) {
|
|
error = -EBUSY;
|
|
goto Unlock;
|
|
}
|
|
|
|
if ((filp->f_flags & O_ACCMODE) == O_RDWR) {
|
|
atomic_inc(&snapshot_device_available);
|
|
error = -ENOSYS;
|
|
goto Unlock;
|
|
}
|
|
if(create_basic_memory_bitmaps()) {
|
|
atomic_inc(&snapshot_device_available);
|
|
error = -ENOMEM;
|
|
goto Unlock;
|
|
}
|
|
nonseekable_open(inode, filp);
|
|
data = &snapshot_state;
|
|
filp->private_data = data;
|
|
memset(&data->handle, 0, sizeof(struct snapshot_handle));
|
|
if ((filp->f_flags & O_ACCMODE) == O_RDONLY) {
|
|
/* Hibernating. The image device should be accessible. */
|
|
data->swap = swsusp_resume_device ?
|
|
swap_type_of(swsusp_resume_device, 0, NULL) : -1;
|
|
data->mode = O_RDONLY;
|
|
error = pm_notifier_call_chain(PM_HIBERNATION_PREPARE);
|
|
if (error)
|
|
pm_notifier_call_chain(PM_POST_HIBERNATION);
|
|
} else {
|
|
/*
|
|
* Resuming. We may need to wait for the image device to
|
|
* appear.
|
|
*/
|
|
wait_for_device_probe();
|
|
|
|
data->swap = -1;
|
|
data->mode = O_WRONLY;
|
|
error = pm_notifier_call_chain(PM_RESTORE_PREPARE);
|
|
if (error)
|
|
pm_notifier_call_chain(PM_POST_RESTORE);
|
|
}
|
|
if (error) {
|
|
free_basic_memory_bitmaps();
|
|
atomic_inc(&snapshot_device_available);
|
|
}
|
|
data->frozen = 0;
|
|
data->ready = 0;
|
|
data->platform_support = 0;
|
|
|
|
Unlock:
|
|
unlock_system_sleep();
|
|
|
|
return error;
|
|
}
|
|
|
|
static int snapshot_release(struct inode *inode, struct file *filp)
|
|
{
|
|
struct snapshot_data *data;
|
|
|
|
lock_system_sleep();
|
|
|
|
swsusp_free();
|
|
free_basic_memory_bitmaps();
|
|
data = filp->private_data;
|
|
free_all_swap_pages(data->swap);
|
|
if (data->frozen) {
|
|
pm_restore_gfp_mask();
|
|
thaw_processes();
|
|
}
|
|
pm_notifier_call_chain(data->mode == O_RDONLY ?
|
|
PM_POST_HIBERNATION : PM_POST_RESTORE);
|
|
atomic_inc(&snapshot_device_available);
|
|
|
|
unlock_system_sleep();
|
|
|
|
return 0;
|
|
}
|
|
|
|
static ssize_t snapshot_read(struct file *filp, char __user *buf,
|
|
size_t count, loff_t *offp)
|
|
{
|
|
struct snapshot_data *data;
|
|
ssize_t res;
|
|
loff_t pg_offp = *offp & ~PAGE_MASK;
|
|
|
|
lock_system_sleep();
|
|
|
|
data = filp->private_data;
|
|
if (!data->ready) {
|
|
res = -ENODATA;
|
|
goto Unlock;
|
|
}
|
|
if (!pg_offp) { /* on page boundary? */
|
|
res = snapshot_read_next(&data->handle);
|
|
if (res <= 0)
|
|
goto Unlock;
|
|
} else {
|
|
res = PAGE_SIZE - pg_offp;
|
|
}
|
|
|
|
res = simple_read_from_buffer(buf, count, &pg_offp,
|
|
data_of(data->handle), res);
|
|
if (res > 0)
|
|
*offp += res;
|
|
|
|
Unlock:
|
|
unlock_system_sleep();
|
|
|
|
return res;
|
|
}
|
|
|
|
static ssize_t snapshot_write(struct file *filp, const char __user *buf,
|
|
size_t count, loff_t *offp)
|
|
{
|
|
struct snapshot_data *data;
|
|
ssize_t res;
|
|
loff_t pg_offp = *offp & ~PAGE_MASK;
|
|
|
|
lock_system_sleep();
|
|
|
|
data = filp->private_data;
|
|
|
|
if (!pg_offp) {
|
|
res = snapshot_write_next(&data->handle);
|
|
if (res <= 0)
|
|
goto unlock;
|
|
} else {
|
|
res = PAGE_SIZE - pg_offp;
|
|
}
|
|
|
|
res = simple_write_to_buffer(data_of(data->handle), res, &pg_offp,
|
|
buf, count);
|
|
if (res > 0)
|
|
*offp += res;
|
|
unlock:
|
|
unlock_system_sleep();
|
|
|
|
return res;
|
|
}
|
|
|
|
static long snapshot_ioctl(struct file *filp, unsigned int cmd,
|
|
unsigned long arg)
|
|
{
|
|
int error = 0;
|
|
struct snapshot_data *data;
|
|
loff_t size;
|
|
sector_t offset;
|
|
|
|
if (_IOC_TYPE(cmd) != SNAPSHOT_IOC_MAGIC)
|
|
return -ENOTTY;
|
|
if (_IOC_NR(cmd) > SNAPSHOT_IOC_MAXNR)
|
|
return -ENOTTY;
|
|
if (!capable(CAP_SYS_ADMIN))
|
|
return -EPERM;
|
|
|
|
if (!mutex_trylock(&pm_mutex))
|
|
return -EBUSY;
|
|
|
|
data = filp->private_data;
|
|
|
|
switch (cmd) {
|
|
|
|
case SNAPSHOT_FREEZE:
|
|
if (data->frozen)
|
|
break;
|
|
|
|
printk("Syncing filesystems ... ");
|
|
sys_sync();
|
|
printk("done.\n");
|
|
|
|
error = freeze_processes();
|
|
if (!error)
|
|
data->frozen = 1;
|
|
break;
|
|
|
|
case SNAPSHOT_UNFREEZE:
|
|
if (!data->frozen || data->ready)
|
|
break;
|
|
pm_restore_gfp_mask();
|
|
thaw_processes();
|
|
data->frozen = 0;
|
|
break;
|
|
|
|
case SNAPSHOT_CREATE_IMAGE:
|
|
if (data->mode != O_RDONLY || !data->frozen || data->ready) {
|
|
error = -EPERM;
|
|
break;
|
|
}
|
|
pm_restore_gfp_mask();
|
|
error = hibernation_snapshot(data->platform_support);
|
|
if (!error) {
|
|
error = put_user(in_suspend, (int __user *)arg);
|
|
data->ready = !freezer_test_done && !error;
|
|
freezer_test_done = false;
|
|
}
|
|
break;
|
|
|
|
case SNAPSHOT_ATOMIC_RESTORE:
|
|
snapshot_write_finalize(&data->handle);
|
|
if (data->mode != O_WRONLY || !data->frozen ||
|
|
!snapshot_image_loaded(&data->handle)) {
|
|
error = -EPERM;
|
|
break;
|
|
}
|
|
error = hibernation_restore(data->platform_support);
|
|
break;
|
|
|
|
case SNAPSHOT_FREE:
|
|
swsusp_free();
|
|
memset(&data->handle, 0, sizeof(struct snapshot_handle));
|
|
data->ready = 0;
|
|
/*
|
|
* It is necessary to thaw kernel threads here, because
|
|
* SNAPSHOT_CREATE_IMAGE may be invoked directly after
|
|
* SNAPSHOT_FREE. In that case, if kernel threads were not
|
|
* thawed, the preallocation of memory carried out by
|
|
* hibernation_snapshot() might run into problems (i.e. it
|
|
* might fail or even deadlock).
|
|
*/
|
|
thaw_kernel_threads();
|
|
break;
|
|
|
|
case SNAPSHOT_PREF_IMAGE_SIZE:
|
|
image_size = arg;
|
|
break;
|
|
|
|
case SNAPSHOT_GET_IMAGE_SIZE:
|
|
if (!data->ready) {
|
|
error = -ENODATA;
|
|
break;
|
|
}
|
|
size = snapshot_get_image_size();
|
|
size <<= PAGE_SHIFT;
|
|
error = put_user(size, (loff_t __user *)arg);
|
|
break;
|
|
|
|
case SNAPSHOT_AVAIL_SWAP_SIZE:
|
|
size = count_swap_pages(data->swap, 1);
|
|
size <<= PAGE_SHIFT;
|
|
error = put_user(size, (loff_t __user *)arg);
|
|
break;
|
|
|
|
case SNAPSHOT_ALLOC_SWAP_PAGE:
|
|
if (data->swap < 0 || data->swap >= MAX_SWAPFILES) {
|
|
error = -ENODEV;
|
|
break;
|
|
}
|
|
offset = alloc_swapdev_block(data->swap);
|
|
if (offset) {
|
|
offset <<= PAGE_SHIFT;
|
|
error = put_user(offset, (loff_t __user *)arg);
|
|
} else {
|
|
error = -ENOSPC;
|
|
}
|
|
break;
|
|
|
|
case SNAPSHOT_FREE_SWAP_PAGES:
|
|
if (data->swap < 0 || data->swap >= MAX_SWAPFILES) {
|
|
error = -ENODEV;
|
|
break;
|
|
}
|
|
free_all_swap_pages(data->swap);
|
|
break;
|
|
|
|
case SNAPSHOT_S2RAM:
|
|
if (!data->frozen) {
|
|
error = -EPERM;
|
|
break;
|
|
}
|
|
/*
|
|
* Tasks are frozen and the notifiers have been called with
|
|
* PM_HIBERNATION_PREPARE
|
|
*/
|
|
error = suspend_devices_and_enter(PM_SUSPEND_MEM);
|
|
data->ready = 0;
|
|
break;
|
|
|
|
case SNAPSHOT_PLATFORM_SUPPORT:
|
|
data->platform_support = !!arg;
|
|
break;
|
|
|
|
case SNAPSHOT_POWER_OFF:
|
|
if (data->platform_support)
|
|
error = hibernation_platform_enter();
|
|
break;
|
|
|
|
case SNAPSHOT_SET_SWAP_AREA:
|
|
if (swsusp_swap_in_use()) {
|
|
error = -EPERM;
|
|
} else {
|
|
struct resume_swap_area swap_area;
|
|
dev_t swdev;
|
|
|
|
error = copy_from_user(&swap_area, (void __user *)arg,
|
|
sizeof(struct resume_swap_area));
|
|
if (error) {
|
|
error = -EFAULT;
|
|
break;
|
|
}
|
|
|
|
/*
|
|
* User space encodes device types as two-byte values,
|
|
* so we need to recode them
|
|
*/
|
|
swdev = new_decode_dev(swap_area.dev);
|
|
if (swdev) {
|
|
offset = swap_area.offset;
|
|
data->swap = swap_type_of(swdev, offset, NULL);
|
|
if (data->swap < 0)
|
|
error = -ENODEV;
|
|
} else {
|
|
data->swap = -1;
|
|
error = -EINVAL;
|
|
}
|
|
}
|
|
break;
|
|
|
|
default:
|
|
error = -ENOTTY;
|
|
|
|
}
|
|
|
|
mutex_unlock(&pm_mutex);
|
|
|
|
return error;
|
|
}
|
|
|
|
#ifdef CONFIG_COMPAT
|
|
|
|
struct compat_resume_swap_area {
|
|
compat_loff_t offset;
|
|
u32 dev;
|
|
} __packed;
|
|
|
|
static long
|
|
snapshot_compat_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
|
|
{
|
|
BUILD_BUG_ON(sizeof(loff_t) != sizeof(compat_loff_t));
|
|
|
|
switch (cmd) {
|
|
case SNAPSHOT_GET_IMAGE_SIZE:
|
|
case SNAPSHOT_AVAIL_SWAP_SIZE:
|
|
case SNAPSHOT_ALLOC_SWAP_PAGE: {
|
|
compat_loff_t __user *uoffset = compat_ptr(arg);
|
|
loff_t offset;
|
|
mm_segment_t old_fs;
|
|
int err;
|
|
|
|
old_fs = get_fs();
|
|
set_fs(KERNEL_DS);
|
|
err = snapshot_ioctl(file, cmd, (unsigned long) &offset);
|
|
set_fs(old_fs);
|
|
if (!err && put_user(offset, uoffset))
|
|
err = -EFAULT;
|
|
return err;
|
|
}
|
|
|
|
case SNAPSHOT_CREATE_IMAGE:
|
|
return snapshot_ioctl(file, cmd,
|
|
(unsigned long) compat_ptr(arg));
|
|
|
|
case SNAPSHOT_SET_SWAP_AREA: {
|
|
struct compat_resume_swap_area __user *u_swap_area =
|
|
compat_ptr(arg);
|
|
struct resume_swap_area swap_area;
|
|
mm_segment_t old_fs;
|
|
int err;
|
|
|
|
err = get_user(swap_area.offset, &u_swap_area->offset);
|
|
err |= get_user(swap_area.dev, &u_swap_area->dev);
|
|
if (err)
|
|
return -EFAULT;
|
|
old_fs = get_fs();
|
|
set_fs(KERNEL_DS);
|
|
err = snapshot_ioctl(file, SNAPSHOT_SET_SWAP_AREA,
|
|
(unsigned long) &swap_area);
|
|
set_fs(old_fs);
|
|
return err;
|
|
}
|
|
|
|
default:
|
|
return snapshot_ioctl(file, cmd, arg);
|
|
}
|
|
}
|
|
|
|
#endif /* CONFIG_COMPAT */
|
|
|
|
static const struct file_operations snapshot_fops = {
|
|
.open = snapshot_open,
|
|
.release = snapshot_release,
|
|
.read = snapshot_read,
|
|
.write = snapshot_write,
|
|
.llseek = no_llseek,
|
|
.unlocked_ioctl = snapshot_ioctl,
|
|
#ifdef CONFIG_COMPAT
|
|
.compat_ioctl = snapshot_compat_ioctl,
|
|
#endif
|
|
};
|
|
|
|
static struct miscdevice snapshot_device = {
|
|
.minor = SNAPSHOT_MINOR,
|
|
.name = "snapshot",
|
|
.fops = &snapshot_fops,
|
|
};
|
|
|
|
static int __init snapshot_device_init(void)
|
|
{
|
|
return misc_register(&snapshot_device);
|
|
};
|
|
|
|
device_initcall(snapshot_device_init);
|