linux/arch/powerpc/platforms/pseries/setup.c
Linus Torvalds 3c87b79188 PCI changes for the v4.4 merge window:
Resource management
     Add support for Enhanced Allocation devices (Sean O. Stalley)
     Add Enhanced Allocation register entries (Sean O. Stalley)
     Handle IORESOURCE_PCI_FIXED when sizing resources (David Daney)
     Handle IORESOURCE_PCI_FIXED when assigning resources (David Daney)
     Handle Enhanced Allocation capability for SR-IOV devices (David Daney)
     Clear IORESOURCE_UNSET when reverting to firmware-assigned address (Bjorn Helgaas)
     Make Enhanced Allocation bitmasks more obvious (Bjorn Helgaas)
     Expand Enhanced Allocation BAR output (Bjorn Helgaas)
     Add of_pci_check_probe_only to parse "linux,pci-probe-only" (Marc Zyngier)
     Fix lookup of linux,pci-probe-only property (Marc Zyngier)
     Add sparc mem64 resource parsing for root bus (Yinghai Lu)
 
   PCI device hotplug
     pciehp: Queue power work requests in dedicated function (Guenter Roeck)
 
   Driver binding
     Add builtin_pci_driver() to avoid registration boilerplate (Paul Gortmaker)
 
   Virtualization
     Set SR-IOV NumVFs to zero after enumeration (Alexander Duyck)
     Remove redundant validation of SR-IOV offset/stride registers (Alexander Duyck)
     Remove VFs in reverse order if virtfn_add() fails (Alexander Duyck)
     Reorder pcibios_sriov_disable() (Alexander Duyck)
     Wait 1 second between disabling VFs and clearing NumVFs (Alexander Duyck)
     Fix sriov_enable() error path for pcibios_enable_sriov() failures (Alexander Duyck)
     Enable SR-IOV ARI Capable Hierarchy before reading TotalVFs (Ben Shelton)
     Don't try to restore VF BARs (Wei Yang)
 
   MSI
     Don't alloc pcibios-irq when MSI is enabled (Joerg Roedel)
     Add msi_controller setup_irqs() method for special multivector setup (Lucas Stach)
     Export all remapped MSIs to sysfs attributes (Romain Bezut)
     Disable MSI on SiS 761 (Ondrej Zary)
 
   AER
     Clear error status registers during enumeration and restore (Taku Izumi)
 
   Generic host bridge driver
     Fix lookup of linux,pci-probe-only property (Marc Zyngier)
     Allow multiple hosts with different map_bus() methods (David Daney)
     Pass starting bus number to pci_scan_root_bus() (David Daney)
     Fix address window calculation for non-zero starting bus (David Daney)
 
   Altera host bridge driver
     Add msi.h to ARM Kbuild (Ley Foon Tan)
     Add Altera PCIe host controller driver (Ley Foon Tan)
     Add Altera PCIe MSI driver (Ley Foon Tan)
 
   APM X-Gene host bridge driver
     Remove msi_controller assignment (Duc Dang)
 
   Broadcom iProc host bridge driver
     Fix header comment "Corporation" misspelling (Florian Fainelli)
     Fix code comment to match code (Ray Jui)
     Remove unused struct iproc_pcie.irqs[] (Ray Jui)
     Call pci_fixup_irqs() for ARM64 as well as ARM (Ray Jui)
     Fix PCIe reset logic (Ray Jui)
     Improve link detection logic (Ray Jui)
     Update PCIe device tree bindings (Ray Jui)
     Add outbound mapping support (Ray Jui)
 
   Freescale i.MX6 host bridge driver
     Return real error code from imx6_add_pcie_port() (Fabio Estevam)
     Add PCIE_PHY_RX_ASIC_OUT_VALID definition (Fabio Estevam)
 
   Freescale Layerscape host bridge driver
     Remove ls_pcie_establish_link() (Minghuan Lian)
     Ignore PCIe controllers in Endpoint mode (Minghuan Lian)
     Factor out SCFG related function (Minghuan Lian)
     Update ls_add_pcie_port() (Minghuan Lian)
     Remove unused fields from struct ls_pcie (Minghuan Lian)
     Add support for LS1043a and LS2080a (Minghuan Lian)
     Add ls_pcie_msi_host_init() (Minghuan Lian)
 
   HiSilicon host bridge driver
     Add HiSilicon SoC Hip05 PCIe driver (Zhou Wang)
 
   Marvell MVEBU host bridge driver
     Return zero for reserved or unimplemented config space (Russell King)
     Use exact config access size; don't read/modify/write (Russell King)
     Use of_get_available_child_count() (Russell King)
     Use for_each_available_child_of_node() to walk child nodes (Russell King)
     Report full node name when reporting a DT error (Russell King)
     Use port->name rather than "PCIe%d.%d" (Russell King)
     Move port parsing and resource claiming to  separate function (Russell King)
     Fix memory leaks and refcount leaks (Russell King)
     Split port parsing and resource claiming from  port setup (Russell King)
     Use gpio_set_value_cansleep() (Russell King)
     Use devm_kcalloc() to allocate an array (Russell King)
     Use gpio_desc to carry around gpio (Russell King)
     Improve clock/reset handling (Russell King)
     Add PCI Express root complex capability block (Russell King)
     Remove code restricting accesses to slot 0 (Russell King)
 
   NVIDIA Tegra host bridge driver
     Wrap static pgprot_t initializer with __pgprot() (Ard Biesheuvel)
 
   Renesas R-Car host bridge driver
     Build pci-rcar-gen2.c only on ARM (Geert Uytterhoeven)
     Build pcie-rcar.c only on ARM (Geert Uytterhoeven)
     Make PCI aware of the I/O resources (Phil Edworthy)
     Remove dependency on ARM-specific struct hw_pci (Phil Edworthy)
     Set root bus nr to that provided in DT (Phil Edworthy)
     Fix I/O offset for multiple host bridges (Phil Edworthy)
 
   ST Microelectronics SPEAr13xx host bridge driver
     Fix dw_pcie_cfg_read/write() usage (Gabriele Paoloni)
 
   Synopsys DesignWare host bridge driver
     Make "clocks" and "clock-names" optional DT properties (Bhupesh Sharma)
     Use exact access size in dw_pcie_cfg_read() (Gabriele Paoloni)
     Simplify dw_pcie_cfg_read/write() interfaces (Gabriele Paoloni)
     Require config accesses to be naturally aligned (Gabriele Paoloni)
     Make "num-lanes" an optional DT property (Gabriele Paoloni)
     Move calculation of bus addresses to DRA7xx (Gabriele Paoloni)
     Replace ARM pci_sys_data->align_resource with global function pointer (Gabriele Paoloni)
     Factor out MSI msg setup (Lucas Stach)
     Implement multivector MSI IRQ setup (Lucas Stach)
     Make get_msi_addr() return phys_addr_t, not u32 (Lucas Stach)
     Set up high part of MSI target address (Lucas Stach)
     Fix PORT_LOGIC_LINK_WIDTH_MASK (Zhou Wang)
     Revert "PCI: designware: Program ATU with untranslated address" (Zhou Wang)
     Use of_pci_get_host_bridge_resources() to parse DT (Zhou Wang)
     Make driver arch-agnostic (Zhou Wang)
 
   Miscellaneous
     Make x86 pci_subsys_init() static (Alexander Kuleshov)
     Turn off Request Attributes to avoid Chelsio T5 Completion erratum (Hariprasad Shenai)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJWPM9aAAoJEFmIoMA60/r89f8QALFMHegqKk5M08ZcCaG7unLF
 5U5t88y6KF/kNYF6HOqLQiHh79U3ToU5HdrNaAtutr0UnvgbFC2WulLqKYgLiq6Y
 YJnwR3EfgGmdG7DKAVAXq19+nc2hgTPAEe8sciU7HKlTbqQmGj6//y3sQULGNLx3
 zur0C33DCtrDgKDP7to273lkHO8Vl0YuLzyqwt0ePCMNcXR0h1dK8QxSTjuXBxaR
 c+T1V1Hw64MTxLz3xJd1/1ipy32u+9LnqqcdRz0zRq6qi48G9ch/i4Z6DHa8kTbj
 DUZrrTYKILQ2TcjcZSBmTueX11Z1Xa4/I/45sehIi6gVWL9qQbmGpt2E5YtFED+4
 GdcmBSbWG/qsNsabXk38uiM3ww7+ltXEOhTXbcK+EgjvIhE6gSK/plYG0fU9pybs
 AKViEXVdHoT1X0N1dLK12mq7kvDCQvShHn08lz97Q9YrZ32wv1Fnij6WVSbJvfWt
 DubtPtisVM+rVy+VTpOImNR9wO54lTmG5jK53yNqH7I20K89y1kqARlN9nMXMB1a
 2nQnwe9yWlsGj9gVNCn1KmyQSPOWjg+3Z+ekfwbxpca14s1AaN3Jm0N9Z61dXFoF
 y2ygoQtZ/z9BHr3quBpxXGt+aVUg2kcNw5GYeDYiALxXdJSObyzRrZ6HDb/zicU2
 ZH9hBj0ctXvucmy6I2mt
 =uZrt
 -----END PGP SIGNATURE-----

Merge tag 'pci-v4.4-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI updates from Bjorn Helgaas:
 "Resource management:
   - Add support for Enhanced Allocation devices (Sean O. Stalley)
   - Add Enhanced Allocation register entries (Sean O. Stalley)
   - Handle IORESOURCE_PCI_FIXED when sizing resources (David Daney)
   - Handle IORESOURCE_PCI_FIXED when assigning resources (David Daney)
   - Handle Enhanced Allocation capability for SR-IOV devices (David Daney)
   - Clear IORESOURCE_UNSET when reverting to firmware-assigned address (Bjorn Helgaas)
   - Make Enhanced Allocation bitmasks more obvious (Bjorn Helgaas)
   - Expand Enhanced Allocation BAR output (Bjorn Helgaas)
   - Add of_pci_check_probe_only to parse "linux,pci-probe-only" (Marc Zyngier)
   - Fix lookup of linux,pci-probe-only property (Marc Zyngier)
   - Add sparc mem64 resource parsing for root bus (Yinghai Lu)

  PCI device hotplug:
   - pciehp: Queue power work requests in dedicated function (Guenter Roeck)

  Driver binding:
   - Add builtin_pci_driver() to avoid registration boilerplate (Paul Gortmaker)

  Virtualization:
   - Set SR-IOV NumVFs to zero after enumeration (Alexander Duyck)
   - Remove redundant validation of SR-IOV offset/stride registers (Alexander Duyck)
   - Remove VFs in reverse order if virtfn_add() fails (Alexander Duyck)
   - Reorder pcibios_sriov_disable() (Alexander Duyck)
   - Wait 1 second between disabling VFs and clearing NumVFs (Alexander Duyck)
   - Fix sriov_enable() error path for pcibios_enable_sriov() failures (Alexander Duyck)
   - Enable SR-IOV ARI Capable Hierarchy before reading TotalVFs (Ben Shelton)
   - Don't try to restore VF BARs (Wei Yang)

  MSI:
   - Don't alloc pcibios-irq when MSI is enabled (Joerg Roedel)
   - Add msi_controller setup_irqs() method for special multivector setup (Lucas Stach)
   - Export all remapped MSIs to sysfs attributes (Romain Bezut)
   - Disable MSI on SiS 761 (Ondrej Zary)

  AER:
   - Clear error status registers during enumeration and restore (Taku Izumi)

  Generic host bridge driver:
   - Fix lookup of linux,pci-probe-only property (Marc Zyngier)
   - Allow multiple hosts with different map_bus() methods (David Daney)
   - Pass starting bus number to pci_scan_root_bus() (David Daney)
   - Fix address window calculation for non-zero starting bus (David Daney)

  Altera host bridge driver:
   - Add msi.h to ARM Kbuild (Ley Foon Tan)
   - Add Altera PCIe host controller driver (Ley Foon Tan)
   - Add Altera PCIe MSI driver (Ley Foon Tan)

  APM X-Gene host bridge driver:
   - Remove msi_controller assignment (Duc Dang)

  Broadcom iProc host bridge driver:
   - Fix header comment "Corporation" misspelling (Florian Fainelli)
   - Fix code comment to match code (Ray Jui)
   - Remove unused struct iproc_pcie.irqs[] (Ray Jui)
   - Call pci_fixup_irqs() for ARM64 as well as ARM (Ray Jui)
   - Fix PCIe reset logic (Ray Jui)
   - Improve link detection logic (Ray Jui)
   - Update PCIe device tree bindings (Ray Jui)
   - Add outbound mapping support (Ray Jui)

  Freescale i.MX6 host bridge driver:
   - Return real error code from imx6_add_pcie_port() (Fabio Estevam)
   - Add PCIE_PHY_RX_ASIC_OUT_VALID definition (Fabio Estevam)

  Freescale Layerscape host bridge driver:
   - Remove ls_pcie_establish_link() (Minghuan Lian)
   - Ignore PCIe controllers in Endpoint mode (Minghuan Lian)
   - Factor out SCFG related function (Minghuan Lian)
   - Update ls_add_pcie_port() (Minghuan Lian)
   - Remove unused fields from struct ls_pcie (Minghuan Lian)
   - Add support for LS1043a and LS2080a (Minghuan Lian)
   - Add ls_pcie_msi_host_init() (Minghuan Lian)

  HiSilicon host bridge driver:
   - Add HiSilicon SoC Hip05 PCIe driver (Zhou Wang)

  Marvell MVEBU host bridge driver:
   - Return zero for reserved or unimplemented config space (Russell King)
   - Use exact config access size; don't read/modify/write (Russell King)
   - Use of_get_available_child_count() (Russell King)
   - Use for_each_available_child_of_node() to walk child nodes (Russell King)
   - Report full node name when reporting a DT error (Russell King)
   - Use port->name rather than "PCIe%d.%d" (Russell King)
   - Move port parsing and resource claiming to  separate function (Russell King)
   - Fix memory leaks and refcount leaks (Russell King)
   - Split port parsing and resource claiming from  port setup (Russell King)
   - Use gpio_set_value_cansleep() (Russell King)
   - Use devm_kcalloc() to allocate an array (Russell King)
   - Use gpio_desc to carry around gpio (Russell King)
   - Improve clock/reset handling (Russell King)
   - Add PCI Express root complex capability block (Russell King)
   - Remove code restricting accesses to slot 0 (Russell King)

  NVIDIA Tegra host bridge driver:
   - Wrap static pgprot_t initializer with __pgprot() (Ard Biesheuvel)

  Renesas R-Car host bridge driver:
   - Build pci-rcar-gen2.c only on ARM (Geert Uytterhoeven)
   - Build pcie-rcar.c only on ARM (Geert Uytterhoeven)
   - Make PCI aware of the I/O resources (Phil Edworthy)
   - Remove dependency on ARM-specific struct hw_pci (Phil Edworthy)
   - Set root bus nr to that provided in DT (Phil Edworthy)
   - Fix I/O offset for multiple host bridges (Phil Edworthy)

  ST Microelectronics SPEAr13xx host bridge driver:
   - Fix dw_pcie_cfg_read/write() usage (Gabriele Paoloni)

  Synopsys DesignWare host bridge driver:
   - Make "clocks" and "clock-names" optional DT properties (Bhupesh Sharma)
   - Use exact access size in dw_pcie_cfg_read() (Gabriele Paoloni)
   - Simplify dw_pcie_cfg_read/write() interfaces (Gabriele Paoloni)
   - Require config accesses to be naturally aligned (Gabriele Paoloni)
   - Make "num-lanes" an optional DT property (Gabriele Paoloni)
   - Move calculation of bus addresses to DRA7xx (Gabriele Paoloni)
   - Replace ARM pci_sys_data->align_resource with global function pointer (Gabriele Paoloni)
   - Factor out MSI msg setup (Lucas Stach)
   - Implement multivector MSI IRQ setup (Lucas Stach)
   - Make get_msi_addr() return phys_addr_t, not u32 (Lucas Stach)
   - Set up high part of MSI target address (Lucas Stach)
   - Fix PORT_LOGIC_LINK_WIDTH_MASK (Zhou Wang)
   - Revert "PCI: designware: Program ATU with untranslated address" (Zhou Wang)
   - Use of_pci_get_host_bridge_resources() to parse DT (Zhou Wang)
   - Make driver arch-agnostic (Zhou Wang)

  Miscellaneous:
   - Make x86 pci_subsys_init() static (Alexander Kuleshov)
   - Turn off Request Attributes to avoid Chelsio T5 Completion erratum (Hariprasad Shenai)"

* tag 'pci-v4.4-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (94 commits)
  PCI: altera: Add Altera PCIe MSI driver
  PCI: hisi: Add HiSilicon SoC Hip05 PCIe driver
  PCI: layerscape: Add ls_pcie_msi_host_init()
  PCI: layerscape: Add support for LS1043a and LS2080a
  PCI: layerscape: Remove unused fields from struct ls_pcie
  PCI: layerscape: Update ls_add_pcie_port()
  PCI: layerscape: Factor out SCFG related function
  PCI: layerscape: Ignore PCIe controllers in Endpoint mode
  PCI: layerscape: Remove ls_pcie_establish_link()
  PCI: designware: Make "clocks" and "clock-names" optional DT properties
  PCI: designware: Make driver arch-agnostic
  ARM/PCI: Replace pci_sys_data->align_resource with global function pointer
  PCI: designware: Use of_pci_get_host_bridge_resources() to parse DT
  Revert "PCI: designware: Program ATU with untranslated address"
  PCI: designware: Move calculation of bus addresses to DRA7xx
  PCI: designware: Make "num-lanes" an optional DT property
  PCI: designware: Require config accesses to be naturally aligned
  PCI: designware: Simplify dw_pcie_cfg_read/write() interfaces
  PCI: designware: Use exact access size in dw_pcie_cfg_read()
  PCI: spear: Fix dw_pcie_cfg_read/write() usage
  ...
2015-11-06 11:29:53 -08:00

859 lines
21 KiB
C

/*
* 64-bit pSeries and RS/6000 setup code.
*
* Copyright (C) 1995 Linus Torvalds
* Adapted from 'alpha' version by Gary Thomas
* Modified by Cort Dougan (cort@cs.nmt.edu)
* Modified by PPC64 Team, IBM Corp
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
/*
* bootup setup stuff..
*/
#include <linux/cpu.h>
#include <linux/errno.h>
#include <linux/sched.h>
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/stddef.h>
#include <linux/unistd.h>
#include <linux/user.h>
#include <linux/tty.h>
#include <linux/major.h>
#include <linux/interrupt.h>
#include <linux/reboot.h>
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/console.h>
#include <linux/pci.h>
#include <linux/utsname.h>
#include <linux/adb.h>
#include <linux/export.h>
#include <linux/delay.h>
#include <linux/irq.h>
#include <linux/seq_file.h>
#include <linux/root_dev.h>
#include <linux/of.h>
#include <linux/of_pci.h>
#include <linux/kexec.h>
#include <asm/mmu.h>
#include <asm/processor.h>
#include <asm/io.h>
#include <asm/pgtable.h>
#include <asm/prom.h>
#include <asm/rtas.h>
#include <asm/pci-bridge.h>
#include <asm/iommu.h>
#include <asm/dma.h>
#include <asm/machdep.h>
#include <asm/irq.h>
#include <asm/time.h>
#include <asm/nvram.h>
#include <asm/pmc.h>
#include <asm/mpic.h>
#include <asm/xics.h>
#include <asm/ppc-pci.h>
#include <asm/i8259.h>
#include <asm/udbg.h>
#include <asm/smp.h>
#include <asm/firmware.h>
#include <asm/eeh.h>
#include <asm/reg.h>
#include <asm/plpar_wrappers.h>
#include "pseries.h"
int CMO_PrPSP = -1;
int CMO_SecPSP = -1;
unsigned long CMO_PageSize = (ASM_CONST(1) << IOMMU_PAGE_SHIFT_4K);
EXPORT_SYMBOL(CMO_PageSize);
int fwnmi_active; /* TRUE if an FWNMI handler is present */
static struct device_node *pSeries_mpic_node;
static void pSeries_show_cpuinfo(struct seq_file *m)
{
struct device_node *root;
const char *model = "";
root = of_find_node_by_path("/");
if (root)
model = of_get_property(root, "model", NULL);
seq_printf(m, "machine\t\t: CHRP %s\n", model);
of_node_put(root);
}
/* Initialize firmware assisted non-maskable interrupts if
* the firmware supports this feature.
*/
static void __init fwnmi_init(void)
{
unsigned long system_reset_addr, machine_check_addr;
int ibm_nmi_register = rtas_token("ibm,nmi-register");
if (ibm_nmi_register == RTAS_UNKNOWN_SERVICE)
return;
/* If the kernel's not linked at zero we point the firmware at low
* addresses anyway, and use a trampoline to get to the real code. */
system_reset_addr = __pa(system_reset_fwnmi) - PHYSICAL_START;
machine_check_addr = __pa(machine_check_fwnmi) - PHYSICAL_START;
if (0 == rtas_call(ibm_nmi_register, 2, 1, NULL, system_reset_addr,
machine_check_addr))
fwnmi_active = 1;
}
static void pseries_8259_cascade(struct irq_desc *desc)
{
struct irq_chip *chip = irq_desc_get_chip(desc);
unsigned int cascade_irq = i8259_irq();
if (cascade_irq != NO_IRQ)
generic_handle_irq(cascade_irq);
chip->irq_eoi(&desc->irq_data);
}
static void __init pseries_setup_i8259_cascade(void)
{
struct device_node *np, *old, *found = NULL;
unsigned int cascade;
const u32 *addrp;
unsigned long intack = 0;
int naddr;
for_each_node_by_type(np, "interrupt-controller") {
if (of_device_is_compatible(np, "chrp,iic")) {
found = np;
break;
}
}
if (found == NULL) {
printk(KERN_DEBUG "pic: no ISA interrupt controller\n");
return;
}
cascade = irq_of_parse_and_map(found, 0);
if (cascade == NO_IRQ) {
printk(KERN_ERR "pic: failed to map cascade interrupt");
return;
}
pr_debug("pic: cascade mapped to irq %d\n", cascade);
for (old = of_node_get(found); old != NULL ; old = np) {
np = of_get_parent(old);
of_node_put(old);
if (np == NULL)
break;
if (strcmp(np->name, "pci") != 0)
continue;
addrp = of_get_property(np, "8259-interrupt-acknowledge", NULL);
if (addrp == NULL)
continue;
naddr = of_n_addr_cells(np);
intack = addrp[naddr-1];
if (naddr > 1)
intack |= ((unsigned long)addrp[naddr-2]) << 32;
}
if (intack)
printk(KERN_DEBUG "pic: PCI 8259 intack at 0x%016lx\n", intack);
i8259_init(found, intack);
of_node_put(found);
irq_set_chained_handler(cascade, pseries_8259_cascade);
}
static void __init pseries_mpic_init_IRQ(void)
{
struct device_node *np;
const unsigned int *opprop;
unsigned long openpic_addr = 0;
int naddr, n, i, opplen;
struct mpic *mpic;
np = of_find_node_by_path("/");
naddr = of_n_addr_cells(np);
opprop = of_get_property(np, "platform-open-pic", &opplen);
if (opprop != NULL) {
openpic_addr = of_read_number(opprop, naddr);
printk(KERN_DEBUG "OpenPIC addr: %lx\n", openpic_addr);
}
of_node_put(np);
BUG_ON(openpic_addr == 0);
/* Setup the openpic driver */
mpic = mpic_alloc(pSeries_mpic_node, openpic_addr,
MPIC_NO_RESET, 16, 0, " MPIC ");
BUG_ON(mpic == NULL);
/* Add ISUs */
opplen /= sizeof(u32);
for (n = 0, i = naddr; i < opplen; i += naddr, n++) {
unsigned long isuaddr = of_read_number(opprop + i, naddr);
mpic_assign_isu(mpic, n, isuaddr);
}
/* Setup top-level get_irq */
ppc_md.get_irq = mpic_get_irq;
/* All ISUs are setup, complete initialization */
mpic_init(mpic);
/* Look for cascade */
pseries_setup_i8259_cascade();
}
static void __init pseries_xics_init_IRQ(void)
{
xics_init();
pseries_setup_i8259_cascade();
}
static void pseries_lpar_enable_pmcs(void)
{
unsigned long set, reset;
set = 1UL << 63;
reset = 0;
plpar_hcall_norets(H_PERFMON, set, reset);
}
static void __init pseries_discover_pic(void)
{
struct device_node *np;
const char *typep;
for_each_node_by_name(np, "interrupt-controller") {
typep = of_get_property(np, "compatible", NULL);
if (strstr(typep, "open-pic")) {
pSeries_mpic_node = of_node_get(np);
ppc_md.init_IRQ = pseries_mpic_init_IRQ;
setup_kexec_cpu_down_mpic();
smp_init_pseries_mpic();
return;
} else if (strstr(typep, "ppc-xicp")) {
ppc_md.init_IRQ = pseries_xics_init_IRQ;
setup_kexec_cpu_down_xics();
smp_init_pseries_xics();
return;
}
}
printk(KERN_ERR "pSeries_discover_pic: failed to recognize"
" interrupt-controller\n");
}
static int pci_dn_reconfig_notifier(struct notifier_block *nb, unsigned long action, void *data)
{
struct of_reconfig_data *rd = data;
struct device_node *parent, *np = rd->dn;
struct pci_dn *pdn;
int err = NOTIFY_OK;
switch (action) {
case OF_RECONFIG_ATTACH_NODE:
parent = of_get_parent(np);
pdn = parent ? PCI_DN(parent) : NULL;
if (pdn) {
/* Create pdn and EEH device */
update_dn_pci_info(np, pdn->phb);
eeh_dev_init(PCI_DN(np), pdn->phb);
}
of_node_put(parent);
break;
case OF_RECONFIG_DETACH_NODE:
pdn = PCI_DN(np);
if (pdn)
list_del(&pdn->list);
break;
default:
err = NOTIFY_DONE;
break;
}
return err;
}
static struct notifier_block pci_dn_reconfig_nb = {
.notifier_call = pci_dn_reconfig_notifier,
};
struct kmem_cache *dtl_cache;
#ifdef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE
/*
* Allocate space for the dispatch trace log for all possible cpus
* and register the buffers with the hypervisor. This is used for
* computing time stolen by the hypervisor.
*/
static int alloc_dispatch_logs(void)
{
int cpu, ret;
struct paca_struct *pp;
struct dtl_entry *dtl;
if (!firmware_has_feature(FW_FEATURE_SPLPAR))
return 0;
if (!dtl_cache)
return 0;
for_each_possible_cpu(cpu) {
pp = &paca[cpu];
dtl = kmem_cache_alloc(dtl_cache, GFP_KERNEL);
if (!dtl) {
pr_warn("Failed to allocate dispatch trace log for cpu %d\n",
cpu);
pr_warn("Stolen time statistics will be unreliable\n");
break;
}
pp->dtl_ridx = 0;
pp->dispatch_log = dtl;
pp->dispatch_log_end = dtl + N_DISPATCH_LOG;
pp->dtl_curr = dtl;
}
/* Register the DTL for the current (boot) cpu */
dtl = get_paca()->dispatch_log;
get_paca()->dtl_ridx = 0;
get_paca()->dtl_curr = dtl;
get_paca()->lppaca_ptr->dtl_idx = 0;
/* hypervisor reads buffer length from this field */
dtl->enqueue_to_dispatch_time = cpu_to_be32(DISPATCH_LOG_BYTES);
ret = register_dtl(hard_smp_processor_id(), __pa(dtl));
if (ret)
pr_err("WARNING: DTL registration of cpu %d (hw %d) failed "
"with %d\n", smp_processor_id(),
hard_smp_processor_id(), ret);
get_paca()->lppaca_ptr->dtl_enable_mask = 2;
return 0;
}
#else /* !CONFIG_VIRT_CPU_ACCOUNTING_NATIVE */
static inline int alloc_dispatch_logs(void)
{
return 0;
}
#endif /* CONFIG_VIRT_CPU_ACCOUNTING_NATIVE */
static int alloc_dispatch_log_kmem_cache(void)
{
dtl_cache = kmem_cache_create("dtl", DISPATCH_LOG_BYTES,
DISPATCH_LOG_BYTES, 0, NULL);
if (!dtl_cache) {
pr_warn("Failed to create dispatch trace log buffer cache\n");
pr_warn("Stolen time statistics will be unreliable\n");
return 0;
}
return alloc_dispatch_logs();
}
machine_early_initcall(pseries, alloc_dispatch_log_kmem_cache);
static void pseries_lpar_idle(void)
{
/*
* Default handler to go into low thread priority and possibly
* low power mode by cedeing processor to hypervisor
*/
/* Indicate to hypervisor that we are idle. */
get_lppaca()->idle = 1;
/*
* Yield the processor to the hypervisor. We return if
* an external interrupt occurs (which are driven prior
* to returning here) or if a prod occurs from another
* processor. When returning here, external interrupts
* are enabled.
*/
cede_processor();
get_lppaca()->idle = 0;
}
/*
* Enable relocation on during exceptions. This has partition wide scope and
* may take a while to complete, if it takes longer than one second we will
* just give up rather than wasting any more time on this - if that turns out
* to ever be a problem in practice we can move this into a kernel thread to
* finish off the process later in boot.
*/
long pSeries_enable_reloc_on_exc(void)
{
long rc;
unsigned int delay, total_delay = 0;
while (1) {
rc = enable_reloc_on_exceptions();
if (!H_IS_LONG_BUSY(rc))
return rc;
delay = get_longbusy_msecs(rc);
total_delay += delay;
if (total_delay > 1000) {
pr_warn("Warning: Giving up waiting to enable "
"relocation on exceptions (%u msec)!\n",
total_delay);
return rc;
}
mdelay(delay);
}
}
EXPORT_SYMBOL(pSeries_enable_reloc_on_exc);
long pSeries_disable_reloc_on_exc(void)
{
long rc;
while (1) {
rc = disable_reloc_on_exceptions();
if (!H_IS_LONG_BUSY(rc))
return rc;
mdelay(get_longbusy_msecs(rc));
}
}
EXPORT_SYMBOL(pSeries_disable_reloc_on_exc);
#ifdef CONFIG_KEXEC
static void pSeries_machine_kexec(struct kimage *image)
{
long rc;
if (firmware_has_feature(FW_FEATURE_SET_MODE)) {
rc = pSeries_disable_reloc_on_exc();
if (rc != H_SUCCESS)
pr_warning("Warning: Failed to disable relocation on "
"exceptions: %ld\n", rc);
}
default_machine_kexec(image);
}
#endif
#ifdef __LITTLE_ENDIAN__
long pseries_big_endian_exceptions(void)
{
long rc;
while (1) {
rc = enable_big_endian_exceptions();
if (!H_IS_LONG_BUSY(rc))
return rc;
mdelay(get_longbusy_msecs(rc));
}
}
static long pseries_little_endian_exceptions(void)
{
long rc;
while (1) {
rc = enable_little_endian_exceptions();
if (!H_IS_LONG_BUSY(rc))
return rc;
mdelay(get_longbusy_msecs(rc));
}
}
#endif
static void __init find_and_init_phbs(void)
{
struct device_node *node;
struct pci_controller *phb;
struct device_node *root = of_find_node_by_path("/");
for_each_child_of_node(root, node) {
if (node->type == NULL || (strcmp(node->type, "pci") != 0 &&
strcmp(node->type, "pciex") != 0))
continue;
phb = pcibios_alloc_controller(node);
if (!phb)
continue;
rtas_setup_phb(phb);
pci_process_bridge_OF_ranges(phb, node, 0);
isa_bridge_find_early(phb);
phb->controller_ops = pseries_pci_controller_ops;
}
of_node_put(root);
pci_devs_phb_init();
/*
* PCI_PROBE_ONLY and PCI_REASSIGN_ALL_BUS can be set via properties
* in chosen.
*/
of_pci_check_probe_only();
}
static void __init pSeries_setup_arch(void)
{
set_arch_panic_timeout(10, ARCH_PANIC_TIMEOUT);
/* Discover PIC type and setup ppc_md accordingly */
pseries_discover_pic();
/* openpic global configuration register (64-bit format). */
/* openpic Interrupt Source Unit pointer (64-bit format). */
/* python0 facility area (mmio) (64-bit format) REAL address. */
/* init to some ~sane value until calibrate_delay() runs */
loops_per_jiffy = 50000000;
fwnmi_init();
/* By default, only probe PCI (can be overriden by rtas_pci) */
pci_add_flags(PCI_PROBE_ONLY);
/* Find and initialize PCI host bridges */
init_pci_config_tokens();
find_and_init_phbs();
of_reconfig_notifier_register(&pci_dn_reconfig_nb);
pSeries_nvram_init();
if (firmware_has_feature(FW_FEATURE_LPAR)) {
vpa_init(boot_cpuid);
ppc_md.power_save = pseries_lpar_idle;
ppc_md.enable_pmcs = pseries_lpar_enable_pmcs;
} else {
/* No special idle routine */
ppc_md.enable_pmcs = power4_enable_pmcs;
}
ppc_md.pcibios_root_bridge_prepare = pseries_root_bridge_prepare;
if (firmware_has_feature(FW_FEATURE_SET_MODE)) {
long rc;
rc = pSeries_enable_reloc_on_exc();
if (rc == H_P2) {
pr_info("Relocation on exceptions not supported\n");
} else if (rc != H_SUCCESS) {
pr_warn("Unable to enable relocation on exceptions: "
"%ld\n", rc);
}
}
}
static int __init pSeries_init_panel(void)
{
/* Manually leave the kernel version on the panel. */
#ifdef __BIG_ENDIAN__
ppc_md.progress("Linux ppc64\n", 0);
#else
ppc_md.progress("Linux ppc64le\n", 0);
#endif
ppc_md.progress(init_utsname()->version, 0);
return 0;
}
machine_arch_initcall(pseries, pSeries_init_panel);
static int pseries_set_dabr(unsigned long dabr, unsigned long dabrx)
{
return plpar_hcall_norets(H_SET_DABR, dabr);
}
static int pseries_set_xdabr(unsigned long dabr, unsigned long dabrx)
{
/* Have to set at least one bit in the DABRX according to PAPR */
if (dabrx == 0 && dabr == 0)
dabrx = DABRX_USER;
/* PAPR says we can only set kernel and user bits */
dabrx &= DABRX_KERNEL | DABRX_USER;
return plpar_hcall_norets(H_SET_XDABR, dabr, dabrx);
}
static int pseries_set_dawr(unsigned long dawr, unsigned long dawrx)
{
/* PAPR says we can't set HYP */
dawrx &= ~DAWRX_HYP;
return plapr_set_watchpoint0(dawr, dawrx);
}
#define CMO_CHARACTERISTICS_TOKEN 44
#define CMO_MAXLENGTH 1026
void pSeries_coalesce_init(void)
{
struct hvcall_mpp_x_data mpp_x_data;
if (firmware_has_feature(FW_FEATURE_CMO) && !h_get_mpp_x(&mpp_x_data))
powerpc_firmware_features |= FW_FEATURE_XCMO;
else
powerpc_firmware_features &= ~FW_FEATURE_XCMO;
}
/**
* fw_cmo_feature_init - FW_FEATURE_CMO is not stored in ibm,hypertas-functions,
* handle that here. (Stolen from parse_system_parameter_string)
*/
static void pSeries_cmo_feature_init(void)
{
char *ptr, *key, *value, *end;
int call_status;
int page_order = IOMMU_PAGE_SHIFT_4K;
pr_debug(" -> fw_cmo_feature_init()\n");
spin_lock(&rtas_data_buf_lock);
memset(rtas_data_buf, 0, RTAS_DATA_BUF_SIZE);
call_status = rtas_call(rtas_token("ibm,get-system-parameter"), 3, 1,
NULL,
CMO_CHARACTERISTICS_TOKEN,
__pa(rtas_data_buf),
RTAS_DATA_BUF_SIZE);
if (call_status != 0) {
spin_unlock(&rtas_data_buf_lock);
pr_debug("CMO not available\n");
pr_debug(" <- fw_cmo_feature_init()\n");
return;
}
end = rtas_data_buf + CMO_MAXLENGTH - 2;
ptr = rtas_data_buf + 2; /* step over strlen value */
key = value = ptr;
while (*ptr && (ptr <= end)) {
/* Separate the key and value by replacing '=' with '\0' and
* point the value at the string after the '='
*/
if (ptr[0] == '=') {
ptr[0] = '\0';
value = ptr + 1;
} else if (ptr[0] == '\0' || ptr[0] == ',') {
/* Terminate the string containing the key/value pair */
ptr[0] = '\0';
if (key == value) {
pr_debug("Malformed key/value pair\n");
/* Never found a '=', end processing */
break;
}
if (0 == strcmp(key, "CMOPageSize"))
page_order = simple_strtol(value, NULL, 10);
else if (0 == strcmp(key, "PrPSP"))
CMO_PrPSP = simple_strtol(value, NULL, 10);
else if (0 == strcmp(key, "SecPSP"))
CMO_SecPSP = simple_strtol(value, NULL, 10);
value = key = ptr + 1;
}
ptr++;
}
/* Page size is returned as the power of 2 of the page size,
* convert to the page size in bytes before returning
*/
CMO_PageSize = 1 << page_order;
pr_debug("CMO_PageSize = %lu\n", CMO_PageSize);
if (CMO_PrPSP != -1 || CMO_SecPSP != -1) {
pr_info("CMO enabled\n");
pr_debug("CMO enabled, PrPSP=%d, SecPSP=%d\n", CMO_PrPSP,
CMO_SecPSP);
powerpc_firmware_features |= FW_FEATURE_CMO;
pSeries_coalesce_init();
} else
pr_debug("CMO not enabled, PrPSP=%d, SecPSP=%d\n", CMO_PrPSP,
CMO_SecPSP);
spin_unlock(&rtas_data_buf_lock);
pr_debug(" <- fw_cmo_feature_init()\n");
}
/*
* Early initialization. Relocation is on but do not reference unbolted pages
*/
static void __init pSeries_init_early(void)
{
pr_debug(" -> pSeries_init_early()\n");
#ifdef CONFIG_HVC_CONSOLE
if (firmware_has_feature(FW_FEATURE_LPAR))
hvc_vio_init_early();
#endif
if (firmware_has_feature(FW_FEATURE_XDABR))
ppc_md.set_dabr = pseries_set_xdabr;
else if (firmware_has_feature(FW_FEATURE_DABR))
ppc_md.set_dabr = pseries_set_dabr;
if (firmware_has_feature(FW_FEATURE_SET_MODE))
ppc_md.set_dawr = pseries_set_dawr;
pSeries_cmo_feature_init();
iommu_init_early_pSeries();
pr_debug(" <- pSeries_init_early()\n");
}
/**
* pseries_power_off - tell firmware about how to power off the system.
*
* This function calls either the power-off rtas token in normal cases
* or the ibm,power-off-ups token (if present & requested) in case of
* a power failure. If power-off token is used, power on will only be
* possible with power button press. If ibm,power-off-ups token is used
* it will allow auto poweron after power is restored.
*/
static void pseries_power_off(void)
{
int rc;
int rtas_poweroff_ups_token = rtas_token("ibm,power-off-ups");
if (rtas_flash_term_hook)
rtas_flash_term_hook(SYS_POWER_OFF);
if (rtas_poweron_auto == 0 ||
rtas_poweroff_ups_token == RTAS_UNKNOWN_SERVICE) {
rc = rtas_call(rtas_token("power-off"), 2, 1, NULL, -1, -1);
printk(KERN_INFO "RTAS power-off returned %d\n", rc);
} else {
rc = rtas_call(rtas_poweroff_ups_token, 0, 1, NULL);
printk(KERN_INFO "RTAS ibm,power-off-ups returned %d\n", rc);
}
for (;;);
}
/*
* Called very early, MMU is off, device-tree isn't unflattened
*/
static int __init pseries_probe_fw_features(unsigned long node,
const char *uname, int depth,
void *data)
{
const char *prop;
int len;
static int hypertas_found;
static int vec5_found;
if (depth != 1)
return 0;
if (!strcmp(uname, "rtas") || !strcmp(uname, "rtas@0")) {
prop = of_get_flat_dt_prop(node, "ibm,hypertas-functions",
&len);
if (prop) {
powerpc_firmware_features |= FW_FEATURE_LPAR;
fw_hypertas_feature_init(prop, len);
}
hypertas_found = 1;
}
if (!strcmp(uname, "chosen")) {
prop = of_get_flat_dt_prop(node, "ibm,architecture-vec-5",
&len);
if (prop)
fw_vec5_feature_init(prop, len);
vec5_found = 1;
}
return hypertas_found && vec5_found;
}
static int __init pSeries_probe(void)
{
unsigned long root = of_get_flat_dt_root();
const char *dtype = of_get_flat_dt_prop(root, "device_type", NULL);
if (dtype == NULL)
return 0;
if (strcmp(dtype, "chrp"))
return 0;
/* Cell blades firmware claims to be chrp while it's not. Until this
* is fixed, we need to avoid those here.
*/
if (of_flat_dt_is_compatible(root, "IBM,CPBW-1.0") ||
of_flat_dt_is_compatible(root, "IBM,CBEA"))
return 0;
pr_debug("pSeries detected, looking for LPAR capability...\n");
/* Now try to figure out if we are running on LPAR */
of_scan_flat_dt(pseries_probe_fw_features, NULL);
#ifdef __LITTLE_ENDIAN__
if (firmware_has_feature(FW_FEATURE_SET_MODE)) {
long rc;
/*
* Tell the hypervisor that we want our exceptions to
* be taken in little endian mode. If this fails we don't
* want to use BUG() because it will trigger an exception.
*/
rc = pseries_little_endian_exceptions();
if (rc) {
ppc_md.progress("H_SET_MODE LE exception fail", 0);
panic("Could not enable little endian exceptions");
}
}
#endif
if (firmware_has_feature(FW_FEATURE_LPAR))
hpte_init_lpar();
else
hpte_init_native();
pm_power_off = pseries_power_off;
pr_debug("Machine is%s LPAR !\n",
(powerpc_firmware_features & FW_FEATURE_LPAR) ? "" : " not");
return 1;
}
static int pSeries_pci_probe_mode(struct pci_bus *bus)
{
if (firmware_has_feature(FW_FEATURE_LPAR))
return PCI_PROBE_DEVTREE;
return PCI_PROBE_NORMAL;
}
struct pci_controller_ops pseries_pci_controller_ops = {
.probe_mode = pSeries_pci_probe_mode,
};
define_machine(pseries) {
.name = "pSeries",
.probe = pSeries_probe,
.setup_arch = pSeries_setup_arch,
.init_early = pSeries_init_early,
.show_cpuinfo = pSeries_show_cpuinfo,
.log_error = pSeries_log_error,
.pcibios_fixup = pSeries_final_fixup,
.restart = rtas_restart,
.halt = rtas_halt,
.panic = rtas_os_term,
.get_boot_time = rtas_get_boot_time,
.get_rtc_time = rtas_get_rtc_time,
.set_rtc_time = rtas_set_rtc_time,
.calibrate_decr = generic_calibrate_decr,
.progress = rtas_progress,
.system_reset_exception = pSeries_system_reset_exception,
.machine_check_exception = pSeries_machine_check_exception,
#ifdef CONFIG_KEXEC
.machine_kexec = pSeries_machine_kexec,
#endif
#ifdef CONFIG_MEMORY_HOTPLUG_SPARSE
.memory_block_size = pseries_memory_block_size,
#endif
};