mirror of
https://github.com/torvalds/linux.git
synced 2024-12-03 17:41:22 +00:00
791d3ef2e1
'interrupt-parent' is often documented as part of define bindings, but it is really outside the scope of a device binding. It's never required in a given node as it is often inherited from a parent node. Or it can be implicit if a parent node is an 'interrupt-controller' node. So remove it from all the binding files. Cc: Mark Rutland <mark.rutland@arm.com> Cc: devicetree@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org>
108 lines
3.2 KiB
Plaintext
108 lines
3.2 KiB
Plaintext
* Toshiba TC3589x multi-purpose expander
|
|
|
|
The Toshiba TC3589x series are I2C-based MFD devices which may expose the
|
|
following built-in devices: gpio, keypad, rotator (vibrator), PWM (for
|
|
e.g. LEDs or vibrators) The included models are:
|
|
|
|
- TC35890
|
|
- TC35892
|
|
- TC35893
|
|
- TC35894
|
|
- TC35895
|
|
- TC35896
|
|
|
|
Required properties:
|
|
- compatible : must be "toshiba,tc35890", "toshiba,tc35892", "toshiba,tc35893",
|
|
"toshiba,tc35894", "toshiba,tc35895" or "toshiba,tc35896"
|
|
- reg : I2C address of the device
|
|
- interrupts : the interrupt on the parent the controller is connected to
|
|
- interrupt-controller : marks the device node as an interrupt controller
|
|
- #interrupt-cells : should be <1>, the first cell is the IRQ offset on this
|
|
TC3589x interrupt controller.
|
|
|
|
Optional nodes:
|
|
|
|
- GPIO
|
|
This GPIO module inside the TC3589x has 24 (TC35890, TC35892) or 20
|
|
(other models) GPIO lines.
|
|
- compatible : must be "toshiba,tc3589x-gpio"
|
|
- interrupts : interrupt on the parent, which must be the tc3589x MFD device
|
|
- interrupt-controller : marks the device node as an interrupt controller
|
|
- #interrupt-cells : should be <2>, the first cell is the IRQ offset on this
|
|
TC3589x GPIO interrupt controller, the second cell is the interrupt flags
|
|
in accordance with <dt-bindings/interrupt-controller/irq.h>. The following
|
|
flags are valid:
|
|
- IRQ_TYPE_LEVEL_LOW
|
|
- IRQ_TYPE_LEVEL_HIGH
|
|
- IRQ_TYPE_EDGE_RISING
|
|
- IRQ_TYPE_EDGE_FALLING
|
|
- IRQ_TYPE_EDGE_BOTH
|
|
- gpio-controller : marks the device node as a GPIO controller
|
|
- #gpio-cells : should be <2>, the first cell is the GPIO offset on this
|
|
GPIO controller, the second cell is the flags.
|
|
|
|
- Keypad
|
|
This keypad is the same on all variants, supporting up to 96 different
|
|
keys. The linux-specific properties are modeled on those already existing
|
|
in other input drivers.
|
|
- compatible : must be "toshiba,tc3589x-keypad"
|
|
- debounce-delay-ms : debounce interval in milliseconds
|
|
- keypad,num-rows : number of rows in the matrix, see
|
|
bindings/input/matrix-keymap.txt
|
|
- keypad,num-columns : number of columns in the matrix, see
|
|
bindings/input/matrix-keymap.txt
|
|
- linux,keymap: the definition can be found in
|
|
bindings/input/matrix-keymap.txt
|
|
- linux,no-autorepeat: do no enable autorepeat feature.
|
|
- wakeup-source: use any event on keypad as wakeup event.
|
|
(Legacy property supported: "linux,wakeup")
|
|
|
|
Example:
|
|
|
|
tc35893@44 {
|
|
compatible = "toshiba,tc35893";
|
|
reg = <0x44>;
|
|
interrupt-parent = <&gpio6>;
|
|
interrupts = <26 IRQ_TYPE_EDGE_RISING>;
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <1>;
|
|
|
|
tc3589x_gpio {
|
|
compatible = "toshiba,tc3589x-gpio";
|
|
interrupts = <0>;
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
};
|
|
tc3589x_keypad {
|
|
compatible = "toshiba,tc3589x-keypad";
|
|
interrupts = <6>;
|
|
debounce-delay-ms = <4>;
|
|
keypad,num-columns = <8>;
|
|
keypad,num-rows = <8>;
|
|
linux,no-autorepeat;
|
|
linux,keymap = <0x0301006b
|
|
0x04010066
|
|
0x06040072
|
|
0x040200d7
|
|
0x0303006a
|
|
0x0205000e
|
|
0x0607008b
|
|
0x0500001c
|
|
0x0403000b
|
|
0x03040034
|
|
0x05020067
|
|
0x0305006c
|
|
0x040500e7
|
|
0x0005009e
|
|
0x06020073
|
|
0x01030039
|
|
0x07060069
|
|
0x050500d9>;
|
|
wakeup-source;
|
|
};
|
|
};
|