mirror of
https://github.com/torvalds/linux.git
synced 2024-12-03 17:41:22 +00:00
39ce6133b9
As the 'reg' property is mandatory in the subnodes, improve the example by adding the unit address to the sysled node. This prevents the following build warning with W=1: Node /soc/aips@70000000/spba@70000000/ecspi@70010000/pmic@0/leds/sysled0 has a reg or ranges property, but no unit name Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
157 lines
5.5 KiB
Plaintext
157 lines
5.5 KiB
Plaintext
* Freescale MC13783/MC13892 Power Management Integrated Circuit (PMIC)
|
|
|
|
Required properties:
|
|
- compatible : Should be "fsl,mc13783" or "fsl,mc13892"
|
|
|
|
Optional properties:
|
|
- fsl,mc13xxx-uses-adc : Indicate the ADC is being used
|
|
- fsl,mc13xxx-uses-codec : Indicate the Audio Codec is being used
|
|
- fsl,mc13xxx-uses-rtc : Indicate the RTC is being used
|
|
- fsl,mc13xxx-uses-touch : Indicate the touchscreen controller is being used
|
|
|
|
Sub-nodes:
|
|
- codec: Contain the Audio Codec node.
|
|
- adc-port: Contain PMIC SSI port number used for ADC.
|
|
- dac-port: Contain PMIC SSI port number used for DAC.
|
|
- leds : Contain the led nodes and initial register values in property
|
|
"led-control". Number of register depends of used IC, for MC13783 is 6,
|
|
for MC13892 is 4, for MC34708 is 1. See datasheet for bits definitions of
|
|
these registers.
|
|
- #address-cells: Must be 1.
|
|
- #size-cells: Must be 0.
|
|
Each led node should contain "reg", which used as LED ID (described below).
|
|
Optional properties "label" and "linux,default-trigger" is described in
|
|
Documentation/devicetree/bindings/leds/common.txt.
|
|
- regulators : Contain the regulator nodes. The regulators are bound using
|
|
their names as listed below with their registers and bits for enabling.
|
|
|
|
MC13783 LED IDs:
|
|
0 : Main display
|
|
1 : AUX display
|
|
2 : Keypad
|
|
3 : Red 1
|
|
4 : Green 1
|
|
5 : Blue 1
|
|
6 : Red 2
|
|
7 : Green 2
|
|
8 : Blue 2
|
|
9 : Red 3
|
|
10 : Green 3
|
|
11 : Blue 3
|
|
|
|
MC13892 LED IDs:
|
|
0 : Main display
|
|
1 : AUX display
|
|
2 : Keypad
|
|
3 : Red
|
|
4 : Green
|
|
5 : Blue
|
|
|
|
MC34708 LED IDs:
|
|
0 : Charger Red
|
|
1 : Charger Green
|
|
|
|
MC13783 regulators:
|
|
sw1a : regulator SW1A (register 24, bit 0)
|
|
sw1b : regulator SW1B (register 25, bit 0)
|
|
sw2a : regulator SW2A (register 26, bit 0)
|
|
sw2b : regulator SW2B (register 27, bit 0)
|
|
sw3 : regulator SW3 (register 29, bit 20)
|
|
vaudio : regulator VAUDIO (register 32, bit 0)
|
|
viohi : regulator VIOHI (register 32, bit 3)
|
|
violo : regulator VIOLO (register 32, bit 6)
|
|
vdig : regulator VDIG (register 32, bit 9)
|
|
vgen : regulator VGEN (register 32, bit 12)
|
|
vrfdig : regulator VRFDIG (register 32, bit 15)
|
|
vrfref : regulator VRFREF (register 32, bit 18)
|
|
vrfcp : regulator VRFCP (register 32, bit 21)
|
|
vsim : regulator VSIM (register 33, bit 0)
|
|
vesim : regulator VESIM (register 33, bit 3)
|
|
vcam : regulator VCAM (register 33, bit 6)
|
|
vrfbg : regulator VRFBG (register 33, bit 9)
|
|
vvib : regulator VVIB (register 33, bit 11)
|
|
vrf1 : regulator VRF1 (register 33, bit 12)
|
|
vrf2 : regulator VRF2 (register 33, bit 15)
|
|
vmmc1 : regulator VMMC1 (register 33, bit 18)
|
|
vmmc2 : regulator VMMC2 (register 33, bit 21)
|
|
gpo1 : regulator GPO1 (register 34, bit 6)
|
|
gpo2 : regulator GPO2 (register 34, bit 8)
|
|
gpo3 : regulator GPO3 (register 34, bit 10)
|
|
gpo4 : regulator GPO4 (register 34, bit 12)
|
|
pwgt1spi : regulator PWGT1SPI (register 34, bit 15)
|
|
pwgt2spi : regulator PWGT2SPI (register 34, bit 16)
|
|
|
|
MC13892 regulators:
|
|
vcoincell : regulator VCOINCELL (register 13, bit 23)
|
|
sw1 : regulator SW1 (register 24, bit 0)
|
|
sw2 : regulator SW2 (register 25, bit 0)
|
|
sw3 : regulator SW3 (register 26, bit 0)
|
|
sw4 : regulator SW4 (register 27, bit 0)
|
|
swbst : regulator SWBST (register 29, bit 20)
|
|
vgen1 : regulator VGEN1 (register 32, bit 0)
|
|
viohi : regulator VIOHI (register 32, bit 3)
|
|
vdig : regulator VDIG (register 32, bit 9)
|
|
vgen2 : regulator VGEN2 (register 32, bit 12)
|
|
vpll : regulator VPLL (register 32, bit 15)
|
|
vusb2 : regulator VUSB2 (register 32, bit 18)
|
|
vgen3 : regulator VGEN3 (register 33, bit 0)
|
|
vcam : regulator VCAM (register 33, bit 6)
|
|
vvideo : regulator VVIDEO (register 33, bit 12)
|
|
vaudio : regulator VAUDIO (register 33, bit 15)
|
|
vsd : regulator VSD (register 33, bit 18)
|
|
gpo1 : regulator GPO1 (register 34, bit 6)
|
|
gpo2 : regulator GPO2 (register 34, bit 8)
|
|
gpo3 : regulator GPO3 (register 34, bit 10)
|
|
gpo4 : regulator GPO4 (register 34, bit 12)
|
|
pwgt1spi : regulator PWGT1SPI (register 34, bit 15)
|
|
pwgt2spi : regulator PWGT2SPI (register 34, bit 16)
|
|
vusb : regulator VUSB (register 50, bit 3)
|
|
|
|
The bindings details of individual regulator device can be found in:
|
|
Documentation/devicetree/bindings/regulator/regulator.txt
|
|
|
|
Examples:
|
|
|
|
ecspi@70010000 { /* ECSPI1 */
|
|
cs-gpios = <&gpio4 24 0>, /* GPIO4_24 */
|
|
<&gpio4 25 0>; /* GPIO4_25 */
|
|
|
|
pmic: mc13892@0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "fsl,mc13892";
|
|
spi-max-frequency = <6000000>;
|
|
reg = <0>;
|
|
interrupt-parent = <&gpio0>;
|
|
interrupts = <8>;
|
|
|
|
leds {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
led-control = <0x000 0x000 0x0e0 0x000>;
|
|
|
|
sysled@3 {
|
|
reg = <3>;
|
|
label = "system:red:live";
|
|
linux,default-trigger = "heartbeat";
|
|
};
|
|
};
|
|
|
|
regulators {
|
|
sw1_reg: mc13892__sw1 {
|
|
regulator-min-microvolt = <600000>;
|
|
regulator-max-microvolt = <1375000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
sw2_reg: mc13892__sw2 {
|
|
regulator-min-microvolt = <900000>;
|
|
regulator-max-microvolt = <1850000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
};
|
|
};
|
|
};
|