linux/arch/x86/pci/amd_bus.c
Jesse Barnes 2547089ca2 x86/PCI: initialize PCI bus node numbers early
The current mp_bus_to_node array is initialized only by AMD specific
code, since AMD platforms have registers that can be used for
determining mode numbers.  On new Intel platforms it's necessary to
initialize this array as well though, otherwise all PCI node numbers
will be 0, when in fact they should be -1 (indicating that I/O isn't
tied to any particular node).

So move the mp_bus_to_node code into the common PCI code, and
initialize it early with a default value of -1.  This may be overridden
later by arch code (e.g. the AMD code).

With this change, PCI consistent memory and other node specific
allocations (e.g. skbuff allocs) should occur on the "current" node.
If, for performance reasons, applications want to be bound to specific
nodes, they should open their devices only after being pinned to the
CPU where they'll run, for maximum locality.

Acked-by: Yinghai Lu <yinghai@kernel.org>
Tested-by: Jesse Brandeburg <jesse.brandeburg@gmail.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-09-09 13:29:21 -07:00

573 lines
13 KiB
C

#include <linux/init.h>
#include <linux/pci.h>
#include <linux/topology.h>
#include <linux/cpu.h>
#include <asm/pci_x86.h>
#ifdef CONFIG_X86_64
#include <asm/pci-direct.h>
#include <asm/mpspec.h>
#include <linux/cpumask.h>
#endif
/*
* This discovers the pcibus <-> node mapping on AMD K8.
* also get peer root bus resource for io,mmio
*/
#ifdef CONFIG_X86_64
/*
* sub bus (transparent) will use entres from 3 to store extra from root,
* so need to make sure have enought slot there, increase PCI_BUS_NUM_RESOURCES?
*/
#define RES_NUM 16
struct pci_root_info {
char name[12];
unsigned int res_num;
struct resource res[RES_NUM];
int bus_min;
int bus_max;
int node;
int link;
};
/* 4 at this time, it may become to 32 */
#define PCI_ROOT_NR 4
static int pci_root_num;
static struct pci_root_info pci_root_info[PCI_ROOT_NR];
void x86_pci_root_bus_res_quirks(struct pci_bus *b)
{
int i;
int j;
struct pci_root_info *info;
/* don't go for it if _CRS is used already */
if (b->resource[0] != &ioport_resource ||
b->resource[1] != &iomem_resource)
return;
/* if only one root bus, don't need to anything */
if (pci_root_num < 2)
return;
for (i = 0; i < pci_root_num; i++) {
if (pci_root_info[i].bus_min == b->number)
break;
}
if (i == pci_root_num)
return;
printk(KERN_DEBUG "PCI: peer root bus %02x res updated from pci conf\n",
b->number);
info = &pci_root_info[i];
for (j = 0; j < info->res_num; j++) {
struct resource *res;
struct resource *root;
res = &info->res[j];
b->resource[j] = res;
if (res->flags & IORESOURCE_IO)
root = &ioport_resource;
else
root = &iomem_resource;
insert_resource(root, res);
}
}
#define RANGE_NUM 16
struct res_range {
size_t start;
size_t end;
};
static void __init update_range(struct res_range *range, size_t start,
size_t end)
{
int i;
int j;
for (j = 0; j < RANGE_NUM; j++) {
if (!range[j].end)
continue;
if (start <= range[j].start && end >= range[j].end) {
range[j].start = 0;
range[j].end = 0;
continue;
}
if (start <= range[j].start && end < range[j].end && range[j].start < end + 1) {
range[j].start = end + 1;
continue;
}
if (start > range[j].start && end >= range[j].end && range[j].end > start - 1) {
range[j].end = start - 1;
continue;
}
if (start > range[j].start && end < range[j].end) {
/* find the new spare */
for (i = 0; i < RANGE_NUM; i++) {
if (range[i].end == 0)
break;
}
if (i < RANGE_NUM) {
range[i].end = range[j].end;
range[i].start = end + 1;
} else {
printk(KERN_ERR "run of slot in ranges\n");
}
range[j].end = start - 1;
continue;
}
}
}
static void __init update_res(struct pci_root_info *info, size_t start,
size_t end, unsigned long flags, int merge)
{
int i;
struct resource *res;
if (!merge)
goto addit;
/* try to merge it with old one */
for (i = 0; i < info->res_num; i++) {
size_t final_start, final_end;
size_t common_start, common_end;
res = &info->res[i];
if (res->flags != flags)
continue;
common_start = max((size_t)res->start, start);
common_end = min((size_t)res->end, end);
if (common_start > common_end + 1)
continue;
final_start = min((size_t)res->start, start);
final_end = max((size_t)res->end, end);
res->start = final_start;
res->end = final_end;
return;
}
addit:
/* need to add that */
if (info->res_num >= RES_NUM)
return;
res = &info->res[info->res_num];
res->name = info->name;
res->flags = flags;
res->start = start;
res->end = end;
res->child = NULL;
info->res_num++;
}
struct pci_hostbridge_probe {
u32 bus;
u32 slot;
u32 vendor;
u32 device;
};
static struct pci_hostbridge_probe pci_probes[] __initdata = {
{ 0, 0x18, PCI_VENDOR_ID_AMD, 0x1100 },
{ 0, 0x18, PCI_VENDOR_ID_AMD, 0x1200 },
{ 0xff, 0, PCI_VENDOR_ID_AMD, 0x1200 },
{ 0, 0x18, PCI_VENDOR_ID_AMD, 0x1300 },
};
static u64 __initdata fam10h_mmconf_start;
static u64 __initdata fam10h_mmconf_end;
static void __init get_pci_mmcfg_amd_fam10h_range(void)
{
u32 address;
u64 base, msr;
unsigned segn_busn_bits;
/* assume all cpus from fam10h have mmconf */
if (boot_cpu_data.x86 < 0x10)
return;
address = MSR_FAM10H_MMIO_CONF_BASE;
rdmsrl(address, msr);
/* mmconfig is not enable */
if (!(msr & FAM10H_MMIO_CONF_ENABLE))
return;
base = msr & (FAM10H_MMIO_CONF_BASE_MASK<<FAM10H_MMIO_CONF_BASE_SHIFT);
segn_busn_bits = (msr >> FAM10H_MMIO_CONF_BUSRANGE_SHIFT) &
FAM10H_MMIO_CONF_BUSRANGE_MASK;
fam10h_mmconf_start = base;
fam10h_mmconf_end = base + (1ULL<<(segn_busn_bits + 20)) - 1;
}
/**
* early_fill_mp_bus_to_node()
* called before pcibios_scan_root and pci_scan_bus
* fills the mp_bus_to_cpumask array based according to the LDT Bus Number
* Registers found in the K8 northbridge
*/
static int __init early_fill_mp_bus_info(void)
{
int i;
int j;
unsigned bus;
unsigned slot;
int found;
int node;
int link;
int def_node;
int def_link;
struct pci_root_info *info;
u32 reg;
struct resource *res;
size_t start;
size_t end;
struct res_range range[RANGE_NUM];
u64 val;
u32 address;
if (!early_pci_allowed())
return -1;
found = 0;
for (i = 0; i < ARRAY_SIZE(pci_probes); i++) {
u32 id;
u16 device;
u16 vendor;
bus = pci_probes[i].bus;
slot = pci_probes[i].slot;
id = read_pci_config(bus, slot, 0, PCI_VENDOR_ID);
vendor = id & 0xffff;
device = (id>>16) & 0xffff;
if (pci_probes[i].vendor == vendor &&
pci_probes[i].device == device) {
found = 1;
break;
}
}
if (!found)
return 0;
pci_root_num = 0;
for (i = 0; i < 4; i++) {
int min_bus;
int max_bus;
reg = read_pci_config(bus, slot, 1, 0xe0 + (i << 2));
/* Check if that register is enabled for bus range */
if ((reg & 7) != 3)
continue;
min_bus = (reg >> 16) & 0xff;
max_bus = (reg >> 24) & 0xff;
node = (reg >> 4) & 0x07;
#ifdef CONFIG_NUMA
for (j = min_bus; j <= max_bus; j++)
set_mp_bus_to_node(j, node);
#endif
link = (reg >> 8) & 0x03;
info = &pci_root_info[pci_root_num];
info->bus_min = min_bus;
info->bus_max = max_bus;
info->node = node;
info->link = link;
sprintf(info->name, "PCI Bus #%02x", min_bus);
pci_root_num++;
}
/* get the default node and link for left over res */
reg = read_pci_config(bus, slot, 0, 0x60);
def_node = (reg >> 8) & 0x07;
reg = read_pci_config(bus, slot, 0, 0x64);
def_link = (reg >> 8) & 0x03;
memset(range, 0, sizeof(range));
range[0].end = 0xffff;
/* io port resource */
for (i = 0; i < 4; i++) {
reg = read_pci_config(bus, slot, 1, 0xc0 + (i << 3));
if (!(reg & 3))
continue;
start = reg & 0xfff000;
reg = read_pci_config(bus, slot, 1, 0xc4 + (i << 3));
node = reg & 0x07;
link = (reg >> 4) & 0x03;
end = (reg & 0xfff000) | 0xfff;
/* find the position */
for (j = 0; j < pci_root_num; j++) {
info = &pci_root_info[j];
if (info->node == node && info->link == link)
break;
}
if (j == pci_root_num)
continue; /* not found */
info = &pci_root_info[j];
printk(KERN_DEBUG "node %d link %d: io port [%llx, %llx]\n",
node, link, (u64)start, (u64)end);
/* kernel only handle 16 bit only */
if (end > 0xffff)
end = 0xffff;
update_res(info, start, end, IORESOURCE_IO, 1);
update_range(range, start, end);
}
/* add left over io port range to def node/link, [0, 0xffff] */
/* find the position */
for (j = 0; j < pci_root_num; j++) {
info = &pci_root_info[j];
if (info->node == def_node && info->link == def_link)
break;
}
if (j < pci_root_num) {
info = &pci_root_info[j];
for (i = 0; i < RANGE_NUM; i++) {
if (!range[i].end)
continue;
update_res(info, range[i].start, range[i].end,
IORESOURCE_IO, 1);
}
}
memset(range, 0, sizeof(range));
/* 0xfd00000000-0xffffffffff for HT */
range[0].end = (0xfdULL<<32) - 1;
/* need to take out [0, TOM) for RAM*/
address = MSR_K8_TOP_MEM1;
rdmsrl(address, val);
end = (val & 0xffffff800000ULL);
printk(KERN_INFO "TOM: %016lx aka %ldM\n", end, end>>20);
if (end < (1ULL<<32))
update_range(range, 0, end - 1);
/* get mmconfig */
get_pci_mmcfg_amd_fam10h_range();
/* need to take out mmconf range */
if (fam10h_mmconf_end) {
printk(KERN_DEBUG "Fam 10h mmconf [%llx, %llx]\n", fam10h_mmconf_start, fam10h_mmconf_end);
update_range(range, fam10h_mmconf_start, fam10h_mmconf_end);
}
/* mmio resource */
for (i = 0; i < 8; i++) {
reg = read_pci_config(bus, slot, 1, 0x80 + (i << 3));
if (!(reg & 3))
continue;
start = reg & 0xffffff00; /* 39:16 on 31:8*/
start <<= 8;
reg = read_pci_config(bus, slot, 1, 0x84 + (i << 3));
node = reg & 0x07;
link = (reg >> 4) & 0x03;
end = (reg & 0xffffff00);
end <<= 8;
end |= 0xffff;
/* find the position */
for (j = 0; j < pci_root_num; j++) {
info = &pci_root_info[j];
if (info->node == node && info->link == link)
break;
}
if (j == pci_root_num)
continue; /* not found */
info = &pci_root_info[j];
printk(KERN_DEBUG "node %d link %d: mmio [%llx, %llx]",
node, link, (u64)start, (u64)end);
/*
* some sick allocation would have range overlap with fam10h
* mmconf range, so need to update start and end.
*/
if (fam10h_mmconf_end) {
int changed = 0;
u64 endx = 0;
if (start >= fam10h_mmconf_start &&
start <= fam10h_mmconf_end) {
start = fam10h_mmconf_end + 1;
changed = 1;
}
if (end >= fam10h_mmconf_start &&
end <= fam10h_mmconf_end) {
end = fam10h_mmconf_start - 1;
changed = 1;
}
if (start < fam10h_mmconf_start &&
end > fam10h_mmconf_end) {
/* we got a hole */
endx = fam10h_mmconf_start - 1;
update_res(info, start, endx, IORESOURCE_MEM, 0);
update_range(range, start, endx);
printk(KERN_CONT " ==> [%llx, %llx]", (u64)start, endx);
start = fam10h_mmconf_end + 1;
changed = 1;
}
if (changed) {
if (start <= end) {
printk(KERN_CONT " %s [%llx, %llx]", endx?"and":"==>", (u64)start, (u64)end);
} else {
printk(KERN_CONT "%s\n", endx?"":" ==> none");
continue;
}
}
}
update_res(info, start, end, IORESOURCE_MEM, 1);
update_range(range, start, end);
printk(KERN_CONT "\n");
}
/* need to take out [4G, TOM2) for RAM*/
/* SYS_CFG */
address = MSR_K8_SYSCFG;
rdmsrl(address, val);
/* TOP_MEM2 is enabled? */
if (val & (1<<21)) {
/* TOP_MEM2 */
address = MSR_K8_TOP_MEM2;
rdmsrl(address, val);
end = (val & 0xffffff800000ULL);
printk(KERN_INFO "TOM2: %016lx aka %ldM\n", end, end>>20);
update_range(range, 1ULL<<32, end - 1);
}
/*
* add left over mmio range to def node/link ?
* that is tricky, just record range in from start_min to 4G
*/
for (j = 0; j < pci_root_num; j++) {
info = &pci_root_info[j];
if (info->node == def_node && info->link == def_link)
break;
}
if (j < pci_root_num) {
info = &pci_root_info[j];
for (i = 0; i < RANGE_NUM; i++) {
if (!range[i].end)
continue;
update_res(info, range[i].start, range[i].end,
IORESOURCE_MEM, 1);
}
}
for (i = 0; i < pci_root_num; i++) {
int res_num;
int busnum;
info = &pci_root_info[i];
res_num = info->res_num;
busnum = info->bus_min;
printk(KERN_DEBUG "bus: [%02x,%02x] on node %x link %x\n",
info->bus_min, info->bus_max, info->node, info->link);
for (j = 0; j < res_num; j++) {
res = &info->res[j];
printk(KERN_DEBUG "bus: %02x index %x %s: [%llx, %llx]\n",
busnum, j,
(res->flags & IORESOURCE_IO)?"io port":"mmio",
res->start, res->end);
}
}
return 0;
}
#else /* !CONFIG_X86_64 */
static int __init early_fill_mp_bus_info(void) { return 0; }
#endif /* !CONFIG_X86_64 */
/* common 32/64 bit code */
#define ENABLE_CF8_EXT_CFG (1ULL << 46)
static void enable_pci_io_ecs(void *unused)
{
u64 reg;
rdmsrl(MSR_AMD64_NB_CFG, reg);
if (!(reg & ENABLE_CF8_EXT_CFG)) {
reg |= ENABLE_CF8_EXT_CFG;
wrmsrl(MSR_AMD64_NB_CFG, reg);
}
}
static int __cpuinit amd_cpu_notify(struct notifier_block *self,
unsigned long action, void *hcpu)
{
int cpu = (long)hcpu;
switch (action) {
case CPU_ONLINE:
case CPU_ONLINE_FROZEN:
smp_call_function_single(cpu, enable_pci_io_ecs, NULL, 0);
break;
default:
break;
}
return NOTIFY_OK;
}
static struct notifier_block __cpuinitdata amd_cpu_notifier = {
.notifier_call = amd_cpu_notify,
};
static int __init pci_io_ecs_init(void)
{
int cpu;
/* assume all cpus from fam10h have IO ECS */
if (boot_cpu_data.x86 < 0x10)
return 0;
register_cpu_notifier(&amd_cpu_notifier);
for_each_online_cpu(cpu)
amd_cpu_notify(&amd_cpu_notifier, (unsigned long)CPU_ONLINE,
(void *)(long)cpu);
pci_probe |= PCI_HAS_IO_ECS;
return 0;
}
static int __init amd_postcore_init(void)
{
if (boot_cpu_data.x86_vendor != X86_VENDOR_AMD)
return 0;
early_fill_mp_bus_info();
pci_io_ecs_init();
return 0;
}
postcore_initcall(amd_postcore_init);