mirror of
https://github.com/torvalds/linux.git
synced 2024-12-04 01:51:34 +00:00
c8e794cfb0
The mp8859 implements support for current limiting, provide support for configuring this via the driver. The datasheet recommends that if the device has hit the current limit then any changes should be implemented via a ramp so we do so in the driver. Tested-by: Markus Reichl <m.reichl@fivetechno.de> Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://msgid.link/r/20240225-regulator-mp8859-v1-8-68ee2c839ded@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
409 lines
9.5 KiB
C
409 lines
9.5 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
//
|
|
// Copyright (c) 2019 five technologies GmbH
|
|
// Author: Markus Reichl <m.reichl@fivetechno.de>
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/of.h>
|
|
#include <linux/regulator/driver.h>
|
|
#include <linux/regmap.h>
|
|
|
|
|
|
#define VOL_MIN_IDX 0x00
|
|
#define VOL_MAX_IDX 0x7ff
|
|
|
|
/* Register definitions */
|
|
#define MP8859_VOUT_L_REG 0 //3 lo Bits
|
|
#define MP8859_VOUT_H_REG 1 //8 hi Bits
|
|
#define MP8859_VOUT_GO_REG 2
|
|
#define MP8859_IOUT_LIM_REG 3
|
|
#define MP8859_CTL1_REG 4
|
|
#define MP8859_CTL2_REG 5
|
|
#define MP8859_RESERVED1_REG 6
|
|
#define MP8859_RESERVED2_REG 7
|
|
#define MP8859_RESERVED3_REG 8
|
|
#define MP8859_STATUS_REG 9
|
|
#define MP8859_INTERRUPT_REG 0x0A
|
|
#define MP8859_MASK_REG 0x0B
|
|
#define MP8859_ID1_REG 0x0C
|
|
#define MP8859_MFR_ID_REG 0x27
|
|
#define MP8859_DEV_ID_REG 0x28
|
|
#define MP8859_IC_REV_REG 0x29
|
|
|
|
#define MP8859_MAX_REG 0x29
|
|
|
|
#define MP8859_GO_BIT 0x01
|
|
|
|
#define MP8859_IOUT_LIM_MASK 0x7f
|
|
|
|
#define MP8859_ENABLE_MASK 0x80
|
|
#define MP8859_DISCHG_EN_MASK 0x10
|
|
#define MP8859_MODE_MASK 0x08
|
|
|
|
#define MP8859_PG_MASK 0x80
|
|
#define MP8859_OTP_MASK 0x40
|
|
#define MP8859_OTW_MASK 0x20
|
|
#define MP8859_CC_CV_MASK 0x10
|
|
|
|
static int mp8859_set_voltage_sel(struct regulator_dev *rdev, unsigned int sel)
|
|
{
|
|
int ret;
|
|
|
|
ret = regmap_write(rdev->regmap, MP8859_VOUT_L_REG, sel & 0x7);
|
|
|
|
if (ret)
|
|
return ret;
|
|
ret = regmap_write(rdev->regmap, MP8859_VOUT_H_REG, sel >> 3);
|
|
|
|
if (ret)
|
|
return ret;
|
|
ret = regmap_update_bits(rdev->regmap, MP8859_VOUT_GO_REG,
|
|
MP8859_GO_BIT, 1);
|
|
return ret;
|
|
}
|
|
|
|
static int mp8859_get_voltage_sel(struct regulator_dev *rdev)
|
|
{
|
|
unsigned int val_tmp;
|
|
unsigned int val;
|
|
int ret;
|
|
|
|
ret = regmap_read(rdev->regmap, MP8859_VOUT_H_REG, &val_tmp);
|
|
|
|
if (ret)
|
|
return ret;
|
|
val = val_tmp << 3;
|
|
|
|
ret = regmap_read(rdev->regmap, MP8859_VOUT_L_REG, &val_tmp);
|
|
|
|
if (ret)
|
|
return ret;
|
|
val |= val_tmp & 0x07;
|
|
return val;
|
|
}
|
|
|
|
static int mp8859_set_voltage_time_sel(struct regulator_dev *rdev,
|
|
unsigned int from, unsigned int to)
|
|
{
|
|
int change;
|
|
|
|
/* The voltage ramps at 1mV/uS, selectors are 10mV */
|
|
if (from > to)
|
|
change = from - to;
|
|
else
|
|
change = to - from;
|
|
|
|
return change * 10 * 1000;
|
|
}
|
|
|
|
static unsigned int mp8859_get_mode(struct regulator_dev *rdev)
|
|
{
|
|
unsigned int val;
|
|
int ret;
|
|
|
|
ret = regmap_read(rdev->regmap, MP8859_CTL1_REG, &val);
|
|
if (ret != 0) {
|
|
dev_err(&rdev->dev, "Failed to read mode: %d\n", ret);
|
|
return 0;
|
|
}
|
|
|
|
if (val & MP8859_MODE_MASK)
|
|
return REGULATOR_MODE_FAST;
|
|
else
|
|
return REGULATOR_MODE_NORMAL;
|
|
}
|
|
|
|
static int mp8859_set_mode(struct regulator_dev *rdev, unsigned int mode)
|
|
{
|
|
unsigned int val;
|
|
|
|
switch (mode) {
|
|
case REGULATOR_MODE_FAST:
|
|
val = MP8859_MODE_MASK;
|
|
break;
|
|
case REGULATOR_MODE_NORMAL:
|
|
val = 0;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return regmap_update_bits(rdev->regmap, MP8859_CTL1_REG,
|
|
MP8859_MODE_MASK, val);
|
|
}
|
|
|
|
static int mp8859_set_current_limit(struct regulator_dev *rdev,
|
|
int min_uA, int max_uA)
|
|
{
|
|
unsigned int cur_val, new_val;
|
|
int ret, i;
|
|
|
|
/* Steps of 50mA */
|
|
new_val = max_uA / 50000;
|
|
if (new_val > MP8859_IOUT_LIM_MASK)
|
|
return -EINVAL;
|
|
if (new_val == 0)
|
|
return -EINVAL;
|
|
|
|
/*
|
|
* If the regulator is limiting then ramp gradually as per
|
|
* datasheet, otherwise just set the value directly.
|
|
*/
|
|
ret = regmap_read(rdev->regmap, MP8859_STATUS_REG, &cur_val);
|
|
if (ret != 0)
|
|
return ret;
|
|
if (!(cur_val & MP8859_CC_CV_MASK)) {
|
|
return regmap_update_bits(rdev->regmap, MP8859_IOUT_LIM_REG,
|
|
MP8859_IOUT_LIM_MASK, new_val);
|
|
}
|
|
|
|
ret = regmap_read(rdev->regmap, MP8859_IOUT_LIM_REG, &cur_val);
|
|
if (ret != 0)
|
|
return ret;
|
|
|
|
if (cur_val >= new_val) {
|
|
for (i = cur_val; i >= new_val; i--) {
|
|
ret = regmap_update_bits(rdev->regmap,
|
|
MP8859_IOUT_LIM_REG,
|
|
MP8859_IOUT_LIM_MASK,
|
|
cur_val - i);
|
|
if (ret != 0)
|
|
return ret;
|
|
}
|
|
} else {
|
|
for (i = cur_val; i <= new_val; i++) {
|
|
ret = regmap_update_bits(rdev->regmap,
|
|
MP8859_IOUT_LIM_REG,
|
|
MP8859_IOUT_LIM_MASK,
|
|
cur_val + i);
|
|
if (ret != 0)
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mp8859_get_status(struct regulator_dev *rdev)
|
|
{
|
|
unsigned int val;
|
|
int ret;
|
|
|
|
/* Output status is only meaingful when enabled */
|
|
ret = regmap_read(rdev->regmap, MP8859_CTL1_REG, &val);
|
|
if (ret != 0)
|
|
return ret;
|
|
if (!(val & MP8859_ENABLE_MASK))
|
|
return REGULATOR_STATUS_UNDEFINED;
|
|
|
|
ret = regmap_read(rdev->regmap, MP8859_STATUS_REG, &val);
|
|
if (ret != 0)
|
|
return ret;
|
|
|
|
if (val & MP8859_PG_MASK)
|
|
return REGULATOR_STATUS_ON;
|
|
else
|
|
return REGULATOR_STATUS_ERROR;
|
|
}
|
|
|
|
static int mp8859_get_error_flags(struct regulator_dev *rdev,
|
|
unsigned int *flags)
|
|
{
|
|
unsigned int status, enabled;
|
|
int ret;
|
|
|
|
*flags = 0;
|
|
|
|
/* Output status is only meaingful when enabled */
|
|
ret = regmap_read(rdev->regmap, MP8859_CTL1_REG, &enabled);
|
|
if (ret != 0)
|
|
return ret;
|
|
enabled &= MP8859_ENABLE_MASK;
|
|
|
|
ret = regmap_read(rdev->regmap, MP8859_STATUS_REG, &status);
|
|
if (ret != 0)
|
|
return ret;
|
|
|
|
if (enabled && !(status & MP8859_PG_MASK))
|
|
status |= REGULATOR_ERROR_FAIL;
|
|
if (status & MP8859_OTP_MASK)
|
|
status |= REGULATOR_ERROR_OVER_TEMP;
|
|
if (status & MP8859_OTW_MASK)
|
|
status |= REGULATOR_ERROR_OVER_TEMP_WARN;
|
|
if (status & MP8859_CC_CV_MASK)
|
|
status |= REGULATOR_ERROR_OVER_CURRENT;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct linear_range mp8859_dcdc_ranges[] = {
|
|
REGULATOR_LINEAR_RANGE(0, VOL_MIN_IDX, VOL_MAX_IDX, 10000),
|
|
};
|
|
|
|
static bool mp8859_readable(struct device *dev, unsigned int reg)
|
|
{
|
|
switch (reg) {
|
|
case MP8859_VOUT_L_REG:
|
|
case MP8859_VOUT_H_REG:
|
|
case MP8859_VOUT_GO_REG:
|
|
case MP8859_IOUT_LIM_REG:
|
|
case MP8859_CTL1_REG:
|
|
case MP8859_CTL2_REG:
|
|
case MP8859_STATUS_REG:
|
|
case MP8859_INTERRUPT_REG:
|
|
case MP8859_MASK_REG:
|
|
case MP8859_ID1_REG:
|
|
case MP8859_MFR_ID_REG:
|
|
case MP8859_DEV_ID_REG:
|
|
case MP8859_IC_REV_REG:
|
|
return true;
|
|
default:
|
|
return false;
|
|
}
|
|
}
|
|
|
|
static bool mp8859_volatile(struct device *dev, unsigned int reg)
|
|
{
|
|
switch (reg) {
|
|
case MP8859_VOUT_GO_REG:
|
|
case MP8859_STATUS_REG:
|
|
case MP8859_INTERRUPT_REG:
|
|
return true;
|
|
default:
|
|
return false;
|
|
}
|
|
}
|
|
|
|
static const struct regmap_config mp8859_regmap = {
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
.max_register = MP8859_MAX_REG,
|
|
.cache_type = REGCACHE_MAPLE,
|
|
.readable_reg = mp8859_readable,
|
|
.volatile_reg = mp8859_volatile,
|
|
};
|
|
|
|
static const struct regulator_ops mp8859_ops = {
|
|
.set_voltage_sel = mp8859_set_voltage_sel,
|
|
.get_voltage_sel = mp8859_get_voltage_sel,
|
|
.list_voltage = regulator_list_voltage_linear_range,
|
|
.set_voltage_time_sel = mp8859_set_voltage_time_sel,
|
|
.enable = regulator_enable_regmap,
|
|
.disable = regulator_disable_regmap,
|
|
.is_enabled = regulator_is_enabled_regmap,
|
|
.set_mode = mp8859_set_mode,
|
|
.get_mode = mp8859_get_mode,
|
|
.set_active_discharge = regulator_set_active_discharge_regmap,
|
|
.set_current_limit = mp8859_set_current_limit,
|
|
.get_status = mp8859_get_status,
|
|
.get_error_flags = mp8859_get_error_flags,
|
|
};
|
|
|
|
static const struct regulator_desc mp8859_regulators[] = {
|
|
{
|
|
.id = 0,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.name = "mp8859_dcdc",
|
|
.supply_name = "vin",
|
|
.of_match = of_match_ptr("mp8859_dcdc"),
|
|
.n_voltages = VOL_MAX_IDX + 1,
|
|
.linear_ranges = mp8859_dcdc_ranges,
|
|
.n_linear_ranges = 1,
|
|
.enable_reg = MP8859_CTL1_REG,
|
|
.enable_mask = MP8859_ENABLE_MASK,
|
|
.enable_val = MP8859_ENABLE_MASK,
|
|
.active_discharge_reg = MP8859_CTL1_REG,
|
|
.active_discharge_on = MP8859_DISCHG_EN_MASK,
|
|
.active_discharge_mask = MP8859_DISCHG_EN_MASK,
|
|
.ops = &mp8859_ops,
|
|
.owner = THIS_MODULE,
|
|
},
|
|
};
|
|
|
|
static int mp8859_i2c_probe(struct i2c_client *i2c)
|
|
{
|
|
int ret;
|
|
struct regulator_config config = {.dev = &i2c->dev};
|
|
struct regmap *regmap = devm_regmap_init_i2c(i2c, &mp8859_regmap);
|
|
struct regulator_dev *rdev;
|
|
unsigned int val, rev;
|
|
|
|
if (IS_ERR(regmap)) {
|
|
ret = PTR_ERR(regmap);
|
|
dev_err(&i2c->dev, "regmap init failed: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = regmap_read(regmap, MP8859_MFR_ID_REG, &val);
|
|
if (ret != 0) {
|
|
dev_err(&i2c->dev, "Failed to read manufacturer ID: %d\n", ret);
|
|
return ret;
|
|
}
|
|
if (val != 0x9) {
|
|
dev_err(&i2c->dev, "Manufacturer ID %x != 9\n", val);
|
|
return -EINVAL;
|
|
}
|
|
|
|
ret = regmap_read(regmap, MP8859_DEV_ID_REG, &val);
|
|
if (ret != 0) {
|
|
dev_err(&i2c->dev, "Failed to read device ID: %d\n", ret);
|
|
return ret;
|
|
}
|
|
if (val != 0x58) {
|
|
dev_err(&i2c->dev, "Manufacturer ID %x != 0x58\n", val);
|
|
return -EINVAL;
|
|
}
|
|
|
|
ret = regmap_read(regmap, MP8859_IC_REV_REG, &rev);
|
|
if (ret != 0) {
|
|
dev_err(&i2c->dev, "Failed to read device revision: %d\n", ret);
|
|
return ret;
|
|
}
|
|
ret = regmap_read(regmap, MP8859_ID1_REG, &val);
|
|
if (ret != 0) {
|
|
dev_err(&i2c->dev, "Failed to read device ID1: %d\n", ret);
|
|
return ret;
|
|
}
|
|
dev_info(&i2c->dev, "MP8859-%04d revision %d\n", val, rev);
|
|
|
|
rdev = devm_regulator_register(&i2c->dev, &mp8859_regulators[0],
|
|
&config);
|
|
|
|
if (IS_ERR(rdev)) {
|
|
ret = PTR_ERR(rdev);
|
|
dev_err(&i2c->dev, "failed to register %s: %d\n",
|
|
mp8859_regulators[0].name, ret);
|
|
return ret;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id mp8859_dt_id[] __maybe_unused = {
|
|
{.compatible = "mps,mp8859"},
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, mp8859_dt_id);
|
|
|
|
static const struct i2c_device_id mp8859_i2c_id[] = {
|
|
{ "mp8859", },
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, mp8859_i2c_id);
|
|
|
|
static struct i2c_driver mp8859_regulator_driver = {
|
|
.driver = {
|
|
.name = "mp8859",
|
|
.probe_type = PROBE_PREFER_ASYNCHRONOUS,
|
|
.of_match_table = of_match_ptr(mp8859_dt_id),
|
|
},
|
|
.probe = mp8859_i2c_probe,
|
|
.id_table = mp8859_i2c_id,
|
|
};
|
|
|
|
module_i2c_driver(mp8859_regulator_driver);
|
|
|
|
MODULE_DESCRIPTION("Monolithic Power Systems MP8859 voltage regulator driver");
|
|
MODULE_AUTHOR("Markus Reichl <m.reichl@fivetechno.de>");
|
|
MODULE_LICENSE("GPL v2");
|