mirror of
https://github.com/torvalds/linux.git
synced 2024-12-26 21:02:19 +00:00
6131084a0b
Adds DT binding for explicitly choosing a tdm mask for DAI and uses it in simple-card. The API for snd_soc_of_parse_tdm_slot() has also been changed. Signed-off-by: Jyri Sarha <jsarha@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
30 lines
1.1 KiB
Plaintext
30 lines
1.1 KiB
Plaintext
TDM slot:
|
|
|
|
This specifies audio DAI's TDM slot.
|
|
|
|
TDM slot properties:
|
|
dai-tdm-slot-num : Number of slots in use.
|
|
dai-tdm-slot-width : Width in bits for each slot.
|
|
dai-tdm-slot-tx-mask : Transmit direction slot mask, optional
|
|
dai-tdm-slot-rx-mask : Receive direction slot mask, optional
|
|
|
|
For instance:
|
|
dai-tdm-slot-num = <2>;
|
|
dai-tdm-slot-width = <8>;
|
|
dai-tdm-slot-tx-mask = <0 1>;
|
|
dai-tdm-slot-rx-mask = <1 0>;
|
|
|
|
And for each spcified driver, there could be one .of_xlate_tdm_slot_mask()
|
|
to specify a explicit mapping of the channels and the slots. If it's absent
|
|
the default snd_soc_of_xlate_tdm_slot_mask() will be used to generating the
|
|
tx and rx masks.
|
|
|
|
For snd_soc_of_xlate_tdm_slot_mask(), the tx and rx masks will use a 1 bit
|
|
for an active slot as default, and the default active bits are at the LSB of
|
|
the masks.
|
|
|
|
The explicit masks are given as array of integers, where the first
|
|
number presents bit-0 (LSB), second presents bit-1, etc. Any non zero
|
|
number is considered 1 and 0 is 0. snd_soc_of_xlate_tdm_slot_mask()
|
|
does not do anything, if either mask is set non zero value.
|