mirror of
https://github.com/torvalds/linux.git
synced 2024-12-26 21:02:19 +00:00
a2a4d6049a
ESAI need to enable the spba clock, when sdma is using share peripheral script. In this case, there is two spba master port is used, if don't enable the clock, the spba bus will have arbitration issue, which may cause read/write wrong data from/to ESAI registers. Signed-off-by: Shengjiu Wang <shengjiu.wang@freescale.com> Acked-by: Nicolin Chen <nicoleotsuka@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
64 lines
2.2 KiB
Plaintext
64 lines
2.2 KiB
Plaintext
Freescale Enhanced Serial Audio Interface (ESAI) Controller
|
|
|
|
The Enhanced Serial Audio Interface (ESAI) provides a full-duplex serial port
|
|
for serial communication with a variety of serial devices, including industry
|
|
standard codecs, Sony/Phillips Digital Interface (S/PDIF) transceivers, and
|
|
other DSPs. It has up to six transmitters and four receivers.
|
|
|
|
Required properties:
|
|
|
|
- compatible : Compatible list, must contain "fsl,imx35-esai" or
|
|
"fsl,vf610-esai"
|
|
|
|
- reg : Offset and length of the register set for the device.
|
|
|
|
- interrupts : Contains the spdif interrupt.
|
|
|
|
- dmas : Generic dma devicetree binding as described in
|
|
Documentation/devicetree/bindings/dma/dma.txt.
|
|
|
|
- dma-names : Two dmas have to be defined, "tx" and "rx".
|
|
|
|
- clocks : Contains an entry for each entry in clock-names.
|
|
|
|
- clock-names : Includes the following entries:
|
|
"core" The core clock used to access registers
|
|
"extal" The esai baud clock for esai controller used to
|
|
derive HCK, SCK and FS.
|
|
"fsys" The system clock derived from ahb clock used to
|
|
derive HCK, SCK and FS.
|
|
"spba" The spba clock is required when ESAI is placed as a
|
|
bus slave of the Shared Peripheral Bus and when two
|
|
or more bus masters (CPU, DMA or DSP) try to access
|
|
it. This property is optional depending on the SoC
|
|
design.
|
|
|
|
- fsl,fifo-depth : The number of elements in the transmit and receive
|
|
FIFOs. This number is the maximum allowed value for
|
|
TFCR[TFWM] or RFCR[RFWM].
|
|
|
|
- fsl,esai-synchronous: This is a boolean property. If present, indicating
|
|
that ESAI would work in the synchronous mode, which
|
|
means all the settings for Receiving would be
|
|
duplicated from Transmition related registers.
|
|
|
|
- big-endian : If this property is absent, the native endian mode
|
|
will be in use as default, or the big endian mode
|
|
will be in use for all the device registers.
|
|
|
|
Example:
|
|
|
|
esai: esai@02024000 {
|
|
compatible = "fsl,imx35-esai";
|
|
reg = <0x02024000 0x4000>;
|
|
interrupts = <0 51 0x04>;
|
|
clocks = <&clks 208>, <&clks 118>, <&clks 208>;
|
|
clock-names = "core", "extal", "fsys";
|
|
dmas = <&sdma 23 21 0>, <&sdma 24 21 0>;
|
|
dma-names = "rx", "tx";
|
|
fsl,fifo-depth = <128>;
|
|
fsl,esai-synchronous;
|
|
big-endian;
|
|
status = "disabled";
|
|
};
|