mirror of
https://github.com/torvalds/linux.git
synced 2024-12-13 14:43:03 +00:00
a7ba70f178
Using a mask to represent bus DMA constraints has a set of limitations. The biggest one being it can only hold a power of two (minus one). The DMA mapping code is already aware of this and treats dev->bus_dma_mask as a limit. This quirk is already used by some architectures although still rare. With the introduction of the Raspberry Pi 4 we've found a new contender for the use of bus DMA limits, as its PCIe bus can only address the lower 3GB of memory (of a total of 4GB). This is impossible to represent with a mask. To make things worse the device-tree code rounds non power of two bus DMA limits to the next power of two, which is unacceptable in this case. In the light of this, rename dev->bus_dma_mask to dev->bus_dma_limit all over the tree and treat it as such. Note that dev->bus_dma_limit should contain the higher accessible DMA address. Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
92 lines
2.7 KiB
C
92 lines
2.7 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* Copyright (C) 2004, 2006 MIPS Technologies, Inc. All rights reserved.
|
|
* Author: Maciej W. Rozycki <macro@mips.com>
|
|
* Copyright (C) 2018 Maciej W. Rozycki
|
|
*/
|
|
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/pci.h>
|
|
|
|
/*
|
|
* Set the BCM1250, etc. PCI host bridge's TRDY timeout
|
|
* to the finite max.
|
|
*/
|
|
static void quirk_sb1250_pci(struct pci_dev *dev)
|
|
{
|
|
pci_write_config_byte(dev, 0x40, 0xff);
|
|
}
|
|
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SIBYTE, PCI_DEVICE_ID_BCM1250_PCI,
|
|
quirk_sb1250_pci);
|
|
|
|
/*
|
|
* The BCM1250, etc. PCI host bridge does not support DAC on its 32-bit
|
|
* bus, so we set the bus's DMA limit accordingly. However the HT link
|
|
* down the artificial PCI-HT bridge supports 40-bit addressing and the
|
|
* SP1011 HT-PCI bridge downstream supports both DAC and a 64-bit bus
|
|
* width, so we record the PCI-HT bridge's secondary and subordinate bus
|
|
* numbers and do not set the limit for devices present in the inclusive
|
|
* range of those.
|
|
*/
|
|
struct sb1250_bus_dma_limit_exclude {
|
|
bool set;
|
|
unsigned char start;
|
|
unsigned char end;
|
|
};
|
|
|
|
static int sb1250_bus_dma_limit(struct pci_dev *dev, void *data)
|
|
{
|
|
struct sb1250_bus_dma_limit_exclude *exclude = data;
|
|
bool exclude_this;
|
|
bool ht_bridge;
|
|
|
|
exclude_this = exclude->set && (dev->bus->number >= exclude->start &&
|
|
dev->bus->number <= exclude->end);
|
|
ht_bridge = !exclude->set && (dev->vendor == PCI_VENDOR_ID_SIBYTE &&
|
|
dev->device == PCI_DEVICE_ID_BCM1250_HT);
|
|
|
|
if (exclude_this) {
|
|
dev_dbg(&dev->dev, "not disabling DAC for device");
|
|
} else if (ht_bridge) {
|
|
exclude->start = dev->subordinate->number;
|
|
exclude->end = pci_bus_max_busnr(dev->subordinate);
|
|
exclude->set = true;
|
|
dev_dbg(&dev->dev, "not disabling DAC for [bus %02x-%02x]",
|
|
exclude->start, exclude->end);
|
|
} else {
|
|
dev_dbg(&dev->dev, "disabling DAC for device");
|
|
dev->dev.bus_dma_limit = DMA_BIT_MASK(32);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void quirk_sb1250_pci_dac(struct pci_dev *dev)
|
|
{
|
|
struct sb1250_bus_dma_limit_exclude exclude = { .set = false };
|
|
|
|
pci_walk_bus(dev->bus, sb1250_bus_dma_limit, &exclude);
|
|
}
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SIBYTE, PCI_DEVICE_ID_BCM1250_PCI,
|
|
quirk_sb1250_pci_dac);
|
|
|
|
/*
|
|
* The BCM1250, etc. PCI/HT bridge reports as a host bridge.
|
|
*/
|
|
static void quirk_sb1250_ht(struct pci_dev *dev)
|
|
{
|
|
dev->class = PCI_CLASS_BRIDGE_PCI << 8;
|
|
}
|
|
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SIBYTE, PCI_DEVICE_ID_BCM1250_HT,
|
|
quirk_sb1250_ht);
|
|
|
|
/*
|
|
* Set the SP1011 HT/PCI bridge's TRDY timeout to the finite max.
|
|
*/
|
|
static void quirk_sp1011(struct pci_dev *dev)
|
|
{
|
|
pci_write_config_byte(dev, 0x64, 0xff);
|
|
}
|
|
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SIPACKETS, PCI_DEVICE_ID_SP1011,
|
|
quirk_sp1011);
|