linux/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.txt
Geert Uytterhoeven 24f1c13fa5 dt-bindings: thermal: rcar-gen3-thermal: All variants use 3 interrupts
RZ/G2M also has 3 interrupts routed to the TSC, but the list was not
updated to reflect this.

Just drop the list, as this is the case for this TSC variant in all
R-Car Gen3 and RZ/G2 SoCs.

Fixes: be6af481f3 ("dt-bindings: thermal: rcar-gen3-thermal: Add r8a774a1 support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-01-02 04:47:10 -08:00

59 lines
1.8 KiB
Plaintext

* DT bindings for Renesas R-Car Gen3 Thermal Sensor driver
On R-Car Gen3 SoCs, the thermal sensor controllers (TSC) control the thermal
sensors (THS) which are the analog circuits for measuring temperature (Tj)
inside the LSI.
Required properties:
- compatible : "renesas,<soctype>-thermal",
Examples with soctypes are:
- "renesas,r8a774a1-thermal" (RZ/G2M)
- "renesas,r8a7795-thermal" (R-Car H3)
- "renesas,r8a7796-thermal" (R-Car M3-W)
- "renesas,r8a77965-thermal" (R-Car M3-N)
- "renesas,r8a77980-thermal" (R-Car V3H)
- reg : Address ranges of the thermal registers. Each sensor
needs one address range. Sorting must be done in
increasing order according to datasheet, i.e.
TSC1, TSC2, ...
- clocks : Must contain a reference to the functional clock.
- #thermal-sensor-cells : must be <1>.
Optional properties:
- interrupts : interrupts routed to the TSC (must be 3).
- power-domain : Must contain a reference to the power domain. This
property is mandatory if the thermal sensor instance
is part of a controllable power domain.
Example:
tsc: thermal@e6198000 {
compatible = "renesas,r8a7795-thermal";
reg = <0 0xe6198000 0 0x100>,
<0 0xe61a0000 0 0x100>,
<0 0xe61a8000 0 0x100>;
interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 522>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
#thermal-sensor-cells = <1>;
};
thermal-zones {
sensor_thermal1: sensor-thermal1 {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsc 0>;
trips {
sensor1_crit: sensor1-crit {
temperature = <90000>;
hysteresis = <2000>;
type = "critical";
};
};
};
};