mirror of
https://github.com/torvalds/linux.git
synced 2024-12-23 19:31:53 +00:00
c273e63129
Lochnagar is an evaluation and development board for Cirrus Logic Smart CODEC and Amp devices. It allows the connection of most Cirrus Logic devices on mini-cards, as well as allowing connection of various application processor systems to provide a full evaluation platform. This driver supports the board controller chip on the Lochnagar board. Add links to the binding documents for the new sound and hardware monitor parts of the driver. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
86 lines
2.3 KiB
Plaintext
86 lines
2.3 KiB
Plaintext
Cirrus Logic Lochnagar Audio Development Board
|
|
|
|
Lochnagar is an evaluation and development board for Cirrus Logic
|
|
Smart CODEC and Amp devices. It allows the connection of most Cirrus
|
|
Logic devices on mini-cards, as well as allowing connection of
|
|
various application processor systems to provide a full evaluation
|
|
platform. Audio system topology, clocking and power can all be
|
|
controlled through the Lochnagar, allowing the device under test
|
|
to be used in a variety of possible use cases.
|
|
|
|
Also see these documents for generic binding information:
|
|
[1] GPIO : ../gpio/gpio.txt
|
|
|
|
And these for relevant defines:
|
|
[2] include/dt-bindings/pinctrl/lochnagar.h
|
|
[3] include/dt-bindings/clock/lochnagar.h
|
|
|
|
And these documents for the required sub-node binding details:
|
|
[4] Clock: ../clock/cirrus,lochnagar.txt
|
|
[5] Pinctrl: ../pinctrl/cirrus,lochnagar.txt
|
|
[6] Regulator: ../regulator/cirrus,lochnagar.txt
|
|
[7] Sound: ../sound/cirrus,lochnagar.txt
|
|
[8] Hardware Monitor: ../hwmon/cirrus,lochnagar.txt
|
|
|
|
Required properties:
|
|
|
|
- compatible : One of the following strings:
|
|
"cirrus,lochnagar1"
|
|
"cirrus,lochnagar2"
|
|
|
|
- reg : I2C slave address
|
|
|
|
- reset-gpios : Reset line to the Lochnagar, see [1].
|
|
|
|
Required sub-nodes:
|
|
|
|
- lochnagar-clk : Binding for the clocking components, see [4].
|
|
|
|
- lochnagar-pinctrl : Binding for the pin control components, see [5].
|
|
|
|
Optional sub-nodes:
|
|
|
|
- Bindings for the regulator components, see [6]. Only available on
|
|
Lochnagar 2.
|
|
|
|
- lochnagar-sc : Binding for the sound card components, see [7].
|
|
Only available on Lochnagar 2.
|
|
- lochnagar-hwmon : Binding for the hardware monitor components, see [8].
|
|
Only available on Lochnagar 2.
|
|
|
|
Optional properties:
|
|
|
|
- present-gpios : Host present line, indicating the presence of a
|
|
host system, see [1]. This can be omitted if the present line is
|
|
tied in hardware.
|
|
|
|
Example:
|
|
|
|
lochnagar: lochnagar@22 {
|
|
compatible = "cirrus,lochnagar2";
|
|
reg = <0x22>;
|
|
|
|
reset-gpios = <&gpio0 55 0>;
|
|
present-gpios = <&gpio0 60 0>;
|
|
|
|
lochnagar-clk {
|
|
compatible = "cirrus,lochnagar2-clk";
|
|
...
|
|
};
|
|
|
|
lochnagar-pinctrl {
|
|
compatible = "cirrus,lochnagar-pinctrl";
|
|
...
|
|
};
|
|
|
|
lochnagar-sc {
|
|
compatible = "cirrus,lochnagar2-soundcard";
|
|
...
|
|
};
|
|
|
|
lochnagar-hwmon {
|
|
compatible = "cirrus,lochnagar2-hwmon";
|
|
...
|
|
};
|
|
};
|