mirror of
https://github.com/torvalds/linux.git
synced 2024-11-29 23:51:37 +00:00
f20ca595ae
This patch adds the WDIOF_CARDRESET support for the platform watchdog whose hardware does not support this feature, to know if the board reboot is due to a watchdog reset. This is done via reserved memory(RAM), which indicates if specific info saved, triggering the watchdog reset in last boot. Signed-off-by: Li Hua Qian <huaqian.li@siemens.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20230718021007.1338761-4-huaqian.li@siemens.com [groeck: vaddr == NULL --> !vaddr] Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
392 lines
9.5 KiB
C
392 lines
9.5 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Watchdog driver for the K3 RTI module
|
|
*
|
|
* (c) Copyright 2019-2020 Texas Instruments Inc.
|
|
* All rights reserved.
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/device.h>
|
|
#include <linux/err.h>
|
|
#include <linux/io.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/mod_devicetable.h>
|
|
#include <linux/module.h>
|
|
#include <linux/moduleparam.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/types.h>
|
|
#include <linux/watchdog.h>
|
|
|
|
#define DEFAULT_HEARTBEAT 60
|
|
|
|
/* Max heartbeat is calculated at 32kHz source clock */
|
|
#define MAX_HEARTBEAT 1000
|
|
|
|
/* Timer register set definition */
|
|
#define RTIDWDCTRL 0x90
|
|
#define RTIDWDPRLD 0x94
|
|
#define RTIWDSTATUS 0x98
|
|
#define RTIWDKEY 0x9c
|
|
#define RTIDWDCNTR 0xa0
|
|
#define RTIWWDRXCTRL 0xa4
|
|
#define RTIWWDSIZECTRL 0xa8
|
|
|
|
#define RTIWWDRX_NMI 0xa
|
|
|
|
#define RTIWWDSIZE_50P 0x50
|
|
#define RTIWWDSIZE_25P 0x500
|
|
#define RTIWWDSIZE_12P5 0x5000
|
|
#define RTIWWDSIZE_6P25 0x50000
|
|
#define RTIWWDSIZE_3P125 0x500000
|
|
|
|
#define WDENABLE_KEY 0xa98559da
|
|
|
|
#define WDKEY_SEQ0 0xe51a
|
|
#define WDKEY_SEQ1 0xa35c
|
|
|
|
#define WDT_PRELOAD_SHIFT 13
|
|
|
|
#define WDT_PRELOAD_MAX 0xfff
|
|
|
|
#define DWDST BIT(1)
|
|
|
|
#define PON_REASON_SOF_NUM 0xBBBBCCCC
|
|
#define PON_REASON_MAGIC_NUM 0xDDDDDDDD
|
|
#define PON_REASON_EOF_NUM 0xCCCCBBBB
|
|
#define RESERVED_MEM_MIN_SIZE 12
|
|
|
|
static int heartbeat = DEFAULT_HEARTBEAT;
|
|
|
|
/*
|
|
* struct to hold data for each WDT device
|
|
* @base - base io address of WD device
|
|
* @freq - source clock frequency of WDT
|
|
* @wdd - hold watchdog device as is in WDT core
|
|
*/
|
|
struct rti_wdt_device {
|
|
void __iomem *base;
|
|
unsigned long freq;
|
|
struct watchdog_device wdd;
|
|
};
|
|
|
|
static int rti_wdt_start(struct watchdog_device *wdd)
|
|
{
|
|
u32 timer_margin;
|
|
struct rti_wdt_device *wdt = watchdog_get_drvdata(wdd);
|
|
|
|
/* set timeout period */
|
|
timer_margin = (u64)wdd->timeout * wdt->freq;
|
|
timer_margin >>= WDT_PRELOAD_SHIFT;
|
|
if (timer_margin > WDT_PRELOAD_MAX)
|
|
timer_margin = WDT_PRELOAD_MAX;
|
|
writel_relaxed(timer_margin, wdt->base + RTIDWDPRLD);
|
|
|
|
/*
|
|
* RTI only supports a windowed mode, where the watchdog can only
|
|
* be petted during the open window; not too early or not too late.
|
|
* The HW configuration options only allow for the open window size
|
|
* to be 50% or less than that; we obviouly want to configure the open
|
|
* window as large as possible so we select the 50% option.
|
|
*/
|
|
wdd->min_hw_heartbeat_ms = 500 * wdd->timeout;
|
|
|
|
/* Generate NMI when wdt expires */
|
|
writel_relaxed(RTIWWDRX_NMI, wdt->base + RTIWWDRXCTRL);
|
|
|
|
/* Open window size 50%; this is the largest window size available */
|
|
writel_relaxed(RTIWWDSIZE_50P, wdt->base + RTIWWDSIZECTRL);
|
|
|
|
readl_relaxed(wdt->base + RTIWWDSIZECTRL);
|
|
|
|
/* enable watchdog */
|
|
writel_relaxed(WDENABLE_KEY, wdt->base + RTIDWDCTRL);
|
|
return 0;
|
|
}
|
|
|
|
static int rti_wdt_ping(struct watchdog_device *wdd)
|
|
{
|
|
struct rti_wdt_device *wdt = watchdog_get_drvdata(wdd);
|
|
|
|
/* put watchdog in service state */
|
|
writel_relaxed(WDKEY_SEQ0, wdt->base + RTIWDKEY);
|
|
/* put watchdog in active state */
|
|
writel_relaxed(WDKEY_SEQ1, wdt->base + RTIWDKEY);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rti_wdt_setup_hw_hb(struct watchdog_device *wdd, u32 wsize)
|
|
{
|
|
/*
|
|
* RTI only supports a windowed mode, where the watchdog can only
|
|
* be petted during the open window; not too early or not too late.
|
|
* The HW configuration options only allow for the open window size
|
|
* to be 50% or less than that.
|
|
*/
|
|
switch (wsize) {
|
|
case RTIWWDSIZE_50P:
|
|
/* 50% open window => 50% min heartbeat */
|
|
wdd->min_hw_heartbeat_ms = 500 * heartbeat;
|
|
break;
|
|
|
|
case RTIWWDSIZE_25P:
|
|
/* 25% open window => 75% min heartbeat */
|
|
wdd->min_hw_heartbeat_ms = 750 * heartbeat;
|
|
break;
|
|
|
|
case RTIWWDSIZE_12P5:
|
|
/* 12.5% open window => 87.5% min heartbeat */
|
|
wdd->min_hw_heartbeat_ms = 875 * heartbeat;
|
|
break;
|
|
|
|
case RTIWWDSIZE_6P25:
|
|
/* 6.5% open window => 93.5% min heartbeat */
|
|
wdd->min_hw_heartbeat_ms = 935 * heartbeat;
|
|
break;
|
|
|
|
case RTIWWDSIZE_3P125:
|
|
/* 3.125% open window => 96.9% min heartbeat */
|
|
wdd->min_hw_heartbeat_ms = 969 * heartbeat;
|
|
break;
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static unsigned int rti_wdt_get_timeleft_ms(struct watchdog_device *wdd)
|
|
{
|
|
u64 timer_counter;
|
|
u32 val;
|
|
struct rti_wdt_device *wdt = watchdog_get_drvdata(wdd);
|
|
|
|
/* if timeout has occurred then return 0 */
|
|
val = readl_relaxed(wdt->base + RTIWDSTATUS);
|
|
if (val & DWDST)
|
|
return 0;
|
|
|
|
timer_counter = readl_relaxed(wdt->base + RTIDWDCNTR);
|
|
|
|
timer_counter *= 1000;
|
|
|
|
do_div(timer_counter, wdt->freq);
|
|
|
|
return timer_counter;
|
|
}
|
|
|
|
static unsigned int rti_wdt_get_timeleft(struct watchdog_device *wdd)
|
|
{
|
|
return rti_wdt_get_timeleft_ms(wdd) / 1000;
|
|
}
|
|
|
|
static const struct watchdog_info rti_wdt_info = {
|
|
.options = WDIOF_KEEPALIVEPING,
|
|
.identity = "K3 RTI Watchdog",
|
|
};
|
|
|
|
static const struct watchdog_ops rti_wdt_ops = {
|
|
.owner = THIS_MODULE,
|
|
.start = rti_wdt_start,
|
|
.ping = rti_wdt_ping,
|
|
.get_timeleft = rti_wdt_get_timeleft,
|
|
};
|
|
|
|
static int rti_wdt_probe(struct platform_device *pdev)
|
|
{
|
|
int ret = 0;
|
|
struct device *dev = &pdev->dev;
|
|
struct watchdog_device *wdd;
|
|
struct rti_wdt_device *wdt;
|
|
struct clk *clk;
|
|
u32 last_ping = 0;
|
|
struct device_node *node;
|
|
u32 reserved_mem_size;
|
|
struct resource res;
|
|
u32 *vaddr;
|
|
u64 paddr;
|
|
|
|
wdt = devm_kzalloc(dev, sizeof(*wdt), GFP_KERNEL);
|
|
if (!wdt)
|
|
return -ENOMEM;
|
|
|
|
clk = clk_get(dev, NULL);
|
|
if (IS_ERR(clk))
|
|
return dev_err_probe(dev, PTR_ERR(clk), "failed to get clock\n");
|
|
|
|
wdt->freq = clk_get_rate(clk);
|
|
|
|
clk_put(clk);
|
|
|
|
if (!wdt->freq) {
|
|
dev_err(dev, "Failed to get fck rate.\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/*
|
|
* If watchdog is running at 32k clock, it is not accurate.
|
|
* Adjust frequency down in this case so that we don't pet
|
|
* the watchdog too often.
|
|
*/
|
|
if (wdt->freq < 32768)
|
|
wdt->freq = wdt->freq * 9 / 10;
|
|
|
|
pm_runtime_enable(dev);
|
|
ret = pm_runtime_resume_and_get(dev);
|
|
if (ret < 0) {
|
|
pm_runtime_disable(&pdev->dev);
|
|
return dev_err_probe(dev, ret, "runtime pm failed\n");
|
|
}
|
|
|
|
platform_set_drvdata(pdev, wdt);
|
|
|
|
wdd = &wdt->wdd;
|
|
wdd->info = &rti_wdt_info;
|
|
wdd->ops = &rti_wdt_ops;
|
|
wdd->min_timeout = 1;
|
|
wdd->max_hw_heartbeat_ms = (WDT_PRELOAD_MAX << WDT_PRELOAD_SHIFT) /
|
|
wdt->freq * 1000;
|
|
wdd->parent = dev;
|
|
|
|
watchdog_set_drvdata(wdd, wdt);
|
|
watchdog_set_nowayout(wdd, 1);
|
|
watchdog_set_restart_priority(wdd, 128);
|
|
|
|
wdt->base = devm_platform_ioremap_resource(pdev, 0);
|
|
if (IS_ERR(wdt->base)) {
|
|
ret = PTR_ERR(wdt->base);
|
|
goto err_iomap;
|
|
}
|
|
|
|
if (readl(wdt->base + RTIDWDCTRL) == WDENABLE_KEY) {
|
|
int preset_heartbeat;
|
|
u32 time_left_ms;
|
|
u64 heartbeat_ms;
|
|
u32 wsize;
|
|
|
|
set_bit(WDOG_HW_RUNNING, &wdd->status);
|
|
time_left_ms = rti_wdt_get_timeleft_ms(wdd);
|
|
heartbeat_ms = readl(wdt->base + RTIDWDPRLD);
|
|
heartbeat_ms <<= WDT_PRELOAD_SHIFT;
|
|
heartbeat_ms *= 1000;
|
|
do_div(heartbeat_ms, wdt->freq);
|
|
preset_heartbeat = heartbeat_ms + 500;
|
|
preset_heartbeat /= 1000;
|
|
if (preset_heartbeat != heartbeat)
|
|
dev_warn(dev, "watchdog already running, ignoring heartbeat config!\n");
|
|
|
|
heartbeat = preset_heartbeat;
|
|
|
|
wsize = readl(wdt->base + RTIWWDSIZECTRL);
|
|
ret = rti_wdt_setup_hw_hb(wdd, wsize);
|
|
if (ret) {
|
|
dev_err(dev, "bad window size.\n");
|
|
goto err_iomap;
|
|
}
|
|
|
|
last_ping = heartbeat_ms - time_left_ms;
|
|
if (time_left_ms > heartbeat_ms) {
|
|
dev_warn(dev, "time_left > heartbeat? Assuming last ping just before now.\n");
|
|
last_ping = 0;
|
|
}
|
|
}
|
|
|
|
node = of_parse_phandle(pdev->dev.of_node, "memory-region", 0);
|
|
if (node) {
|
|
ret = of_address_to_resource(node, 0, &res);
|
|
if (ret) {
|
|
dev_err(dev, "No memory address assigned to the region.\n");
|
|
goto err_iomap;
|
|
}
|
|
|
|
/*
|
|
* If reserved memory is defined for watchdog reset cause.
|
|
* Readout the Power-on(PON) reason and pass to bootstatus.
|
|
*/
|
|
paddr = res.start;
|
|
reserved_mem_size = resource_size(&res);
|
|
if (reserved_mem_size < RESERVED_MEM_MIN_SIZE) {
|
|
dev_err(dev, "The size of reserved memory is too small.\n");
|
|
ret = -EINVAL;
|
|
goto err_iomap;
|
|
}
|
|
|
|
vaddr = memremap(paddr, reserved_mem_size, MEMREMAP_WB);
|
|
if (!vaddr) {
|
|
dev_err(dev, "Failed to map memory-region.\n");
|
|
ret = -ENOMEM;
|
|
goto err_iomap;
|
|
}
|
|
|
|
if (vaddr[0] == PON_REASON_SOF_NUM &&
|
|
vaddr[1] == PON_REASON_MAGIC_NUM &&
|
|
vaddr[2] == PON_REASON_EOF_NUM) {
|
|
wdd->bootstatus |= WDIOF_CARDRESET;
|
|
}
|
|
memset(vaddr, 0, reserved_mem_size);
|
|
memunmap(vaddr);
|
|
}
|
|
|
|
watchdog_init_timeout(wdd, heartbeat, dev);
|
|
|
|
ret = watchdog_register_device(wdd);
|
|
if (ret) {
|
|
dev_err(dev, "cannot register watchdog device\n");
|
|
goto err_iomap;
|
|
}
|
|
|
|
if (last_ping)
|
|
watchdog_set_last_hw_keepalive(wdd, last_ping);
|
|
|
|
return 0;
|
|
|
|
err_iomap:
|
|
pm_runtime_put_sync(&pdev->dev);
|
|
pm_runtime_disable(&pdev->dev);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void rti_wdt_remove(struct platform_device *pdev)
|
|
{
|
|
struct rti_wdt_device *wdt = platform_get_drvdata(pdev);
|
|
|
|
watchdog_unregister_device(&wdt->wdd);
|
|
pm_runtime_put(&pdev->dev);
|
|
pm_runtime_disable(&pdev->dev);
|
|
}
|
|
|
|
static const struct of_device_id rti_wdt_of_match[] = {
|
|
{ .compatible = "ti,j7-rti-wdt", },
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, rti_wdt_of_match);
|
|
|
|
static struct platform_driver rti_wdt_driver = {
|
|
.driver = {
|
|
.name = "rti-wdt",
|
|
.of_match_table = rti_wdt_of_match,
|
|
},
|
|
.probe = rti_wdt_probe,
|
|
.remove_new = rti_wdt_remove,
|
|
};
|
|
|
|
module_platform_driver(rti_wdt_driver);
|
|
|
|
MODULE_AUTHOR("Tero Kristo <t-kristo@ti.com>");
|
|
MODULE_DESCRIPTION("K3 RTI Watchdog Driver");
|
|
|
|
module_param(heartbeat, int, 0);
|
|
MODULE_PARM_DESC(heartbeat,
|
|
"Watchdog heartbeat period in seconds from 1 to "
|
|
__MODULE_STRING(MAX_HEARTBEAT) ", default "
|
|
__MODULE_STRING(DEFAULT_HEARTBEAT));
|
|
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_ALIAS("platform:rti-wdt");
|