mirror of
https://github.com/torvalds/linux.git
synced 2024-11-29 07:31:29 +00:00
299cc3c166
It's a dword thing, and the value we write is a dword. Doing a byte write to it is nonsensical, and writes only the low byte, which only contains the enable bit. So we enable a nonsensical address (usually zero), which causes the controller no end of problems. Trivial fix, but nasty to find. Signed-off-by: Linus Torvalds <torvalds@osdl.org>
822 lines
24 KiB
C
822 lines
24 KiB
C
/* $Id: cmd64x.c,v 1.21 2000/01/30 23:23:16
|
|
*
|
|
* linux/drivers/ide/pci/cmd64x.c Version 1.30 Sept 10, 2002
|
|
*
|
|
* cmd64x.c: Enable interrupts at initialization time on Ultra/PCI machines.
|
|
* Note, this driver is not used at all on other systems because
|
|
* there the "BIOS" has done all of the following already.
|
|
* Due to massive hardware bugs, UltraDMA is only supported
|
|
* on the 646U2 and not on the 646U.
|
|
*
|
|
* Copyright (C) 1998 Eddie C. Dost (ecd@skynet.be)
|
|
* Copyright (C) 1998 David S. Miller (davem@redhat.com)
|
|
*
|
|
* Copyright (C) 1999-2002 Andre Hedrick <andre@linux-ide.org>
|
|
*/
|
|
|
|
#include <linux/config.h>
|
|
#include <linux/module.h>
|
|
#include <linux/types.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/hdreg.h>
|
|
#include <linux/ide.h>
|
|
#include <linux/init.h>
|
|
|
|
#include <asm/io.h>
|
|
|
|
#define DISPLAY_CMD64X_TIMINGS
|
|
|
|
#define CMD_DEBUG 0
|
|
|
|
#if CMD_DEBUG
|
|
#define cmdprintk(x...) printk(x)
|
|
#else
|
|
#define cmdprintk(x...)
|
|
#endif
|
|
|
|
/*
|
|
* CMD64x specific registers definition.
|
|
*/
|
|
#define CFR 0x50
|
|
#define CFR_INTR_CH0 0x02
|
|
#define CNTRL 0x51
|
|
#define CNTRL_DIS_RA0 0x40
|
|
#define CNTRL_DIS_RA1 0x80
|
|
#define CNTRL_ENA_2ND 0x08
|
|
|
|
#define CMDTIM 0x52
|
|
#define ARTTIM0 0x53
|
|
#define DRWTIM0 0x54
|
|
#define ARTTIM1 0x55
|
|
#define DRWTIM1 0x56
|
|
#define ARTTIM23 0x57
|
|
#define ARTTIM23_DIS_RA2 0x04
|
|
#define ARTTIM23_DIS_RA3 0x08
|
|
#define ARTTIM23_INTR_CH1 0x10
|
|
#define ARTTIM2 0x57
|
|
#define ARTTIM3 0x57
|
|
#define DRWTIM23 0x58
|
|
#define DRWTIM2 0x58
|
|
#define BRST 0x59
|
|
#define DRWTIM3 0x5b
|
|
|
|
#define BMIDECR0 0x70
|
|
#define MRDMODE 0x71
|
|
#define MRDMODE_INTR_CH0 0x04
|
|
#define MRDMODE_INTR_CH1 0x08
|
|
#define MRDMODE_BLK_CH0 0x10
|
|
#define MRDMODE_BLK_CH1 0x20
|
|
#define BMIDESR0 0x72
|
|
#define UDIDETCR0 0x73
|
|
#define DTPR0 0x74
|
|
#define BMIDECR1 0x78
|
|
#define BMIDECSR 0x79
|
|
#define BMIDESR1 0x7A
|
|
#define UDIDETCR1 0x7B
|
|
#define DTPR1 0x7C
|
|
|
|
#if defined(DISPLAY_CMD64X_TIMINGS) && defined(CONFIG_PROC_FS)
|
|
#include <linux/stat.h>
|
|
#include <linux/proc_fs.h>
|
|
|
|
static u8 cmd64x_proc = 0;
|
|
|
|
#define CMD_MAX_DEVS 5
|
|
|
|
static struct pci_dev *cmd_devs[CMD_MAX_DEVS];
|
|
static int n_cmd_devs;
|
|
|
|
static char * print_cmd64x_get_info (char *buf, struct pci_dev *dev, int index)
|
|
{
|
|
char *p = buf;
|
|
|
|
u8 reg53 = 0, reg54 = 0, reg55 = 0, reg56 = 0; /* primary */
|
|
u8 reg57 = 0, reg58 = 0, reg5b; /* secondary */
|
|
u8 reg72 = 0, reg73 = 0; /* primary */
|
|
u8 reg7a = 0, reg7b = 0; /* secondary */
|
|
u8 reg50 = 0, reg71 = 0; /* extra */
|
|
|
|
p += sprintf(p, "\nController: %d\n", index);
|
|
p += sprintf(p, "CMD%x Chipset.\n", dev->device);
|
|
(void) pci_read_config_byte(dev, CFR, ®50);
|
|
(void) pci_read_config_byte(dev, ARTTIM0, ®53);
|
|
(void) pci_read_config_byte(dev, DRWTIM0, ®54);
|
|
(void) pci_read_config_byte(dev, ARTTIM1, ®55);
|
|
(void) pci_read_config_byte(dev, DRWTIM1, ®56);
|
|
(void) pci_read_config_byte(dev, ARTTIM2, ®57);
|
|
(void) pci_read_config_byte(dev, DRWTIM2, ®58);
|
|
(void) pci_read_config_byte(dev, DRWTIM3, ®5b);
|
|
(void) pci_read_config_byte(dev, MRDMODE, ®71);
|
|
(void) pci_read_config_byte(dev, BMIDESR0, ®72);
|
|
(void) pci_read_config_byte(dev, UDIDETCR0, ®73);
|
|
(void) pci_read_config_byte(dev, BMIDESR1, ®7a);
|
|
(void) pci_read_config_byte(dev, UDIDETCR1, ®7b);
|
|
|
|
p += sprintf(p, "--------------- Primary Channel "
|
|
"---------------- Secondary Channel "
|
|
"-------------\n");
|
|
p += sprintf(p, " %sabled "
|
|
" %sabled\n",
|
|
(reg72&0x80)?"dis":" en",
|
|
(reg7a&0x80)?"dis":" en");
|
|
p += sprintf(p, "--------------- drive0 "
|
|
"--------- drive1 -------- drive0 "
|
|
"---------- drive1 ------\n");
|
|
p += sprintf(p, "DMA enabled: %s %s"
|
|
" %s %s\n",
|
|
(reg72&0x20)?"yes":"no ", (reg72&0x40)?"yes":"no ",
|
|
(reg7a&0x20)?"yes":"no ", (reg7a&0x40)?"yes":"no ");
|
|
|
|
p += sprintf(p, "DMA Mode: %s(%s) %s(%s)",
|
|
(reg72&0x20)?((reg73&0x01)?"UDMA":" DMA"):" PIO",
|
|
(reg72&0x20)?(
|
|
((reg73&0x30)==0x30)?(((reg73&0x35)==0x35)?"3":"0"):
|
|
((reg73&0x20)==0x20)?(((reg73&0x25)==0x25)?"3":"1"):
|
|
((reg73&0x10)==0x10)?(((reg73&0x15)==0x15)?"4":"2"):
|
|
((reg73&0x00)==0x00)?(((reg73&0x05)==0x05)?"5":"2"):
|
|
"X"):"?",
|
|
(reg72&0x40)?((reg73&0x02)?"UDMA":" DMA"):" PIO",
|
|
(reg72&0x40)?(
|
|
((reg73&0xC0)==0xC0)?(((reg73&0xC5)==0xC5)?"3":"0"):
|
|
((reg73&0x80)==0x80)?(((reg73&0x85)==0x85)?"3":"1"):
|
|
((reg73&0x40)==0x40)?(((reg73&0x4A)==0x4A)?"4":"2"):
|
|
((reg73&0x00)==0x00)?(((reg73&0x0A)==0x0A)?"5":"2"):
|
|
"X"):"?");
|
|
p += sprintf(p, " %s(%s) %s(%s)\n",
|
|
(reg7a&0x20)?((reg7b&0x01)?"UDMA":" DMA"):" PIO",
|
|
(reg7a&0x20)?(
|
|
((reg7b&0x30)==0x30)?(((reg7b&0x35)==0x35)?"3":"0"):
|
|
((reg7b&0x20)==0x20)?(((reg7b&0x25)==0x25)?"3":"1"):
|
|
((reg7b&0x10)==0x10)?(((reg7b&0x15)==0x15)?"4":"2"):
|
|
((reg7b&0x00)==0x00)?(((reg7b&0x05)==0x05)?"5":"2"):
|
|
"X"):"?",
|
|
(reg7a&0x40)?((reg7b&0x02)?"UDMA":" DMA"):" PIO",
|
|
(reg7a&0x40)?(
|
|
((reg7b&0xC0)==0xC0)?(((reg7b&0xC5)==0xC5)?"3":"0"):
|
|
((reg7b&0x80)==0x80)?(((reg7b&0x85)==0x85)?"3":"1"):
|
|
((reg7b&0x40)==0x40)?(((reg7b&0x4A)==0x4A)?"4":"2"):
|
|
((reg7b&0x00)==0x00)?(((reg7b&0x0A)==0x0A)?"5":"2"):
|
|
"X"):"?" );
|
|
p += sprintf(p, "PIO Mode: %s %s"
|
|
" %s %s\n",
|
|
"?", "?", "?", "?");
|
|
p += sprintf(p, " %s %s\n",
|
|
(reg50 & CFR_INTR_CH0) ? "interrupting" : "polling ",
|
|
(reg57 & ARTTIM23_INTR_CH1) ? "interrupting" : "polling");
|
|
p += sprintf(p, " %s %s\n",
|
|
(reg71 & MRDMODE_INTR_CH0) ? "pending" : "clear ",
|
|
(reg71 & MRDMODE_INTR_CH1) ? "pending" : "clear");
|
|
p += sprintf(p, " %s %s\n",
|
|
(reg71 & MRDMODE_BLK_CH0) ? "blocked" : "enabled",
|
|
(reg71 & MRDMODE_BLK_CH1) ? "blocked" : "enabled");
|
|
|
|
return (char *)p;
|
|
}
|
|
|
|
static int cmd64x_get_info (char *buffer, char **addr, off_t offset, int count)
|
|
{
|
|
char *p = buffer;
|
|
int i;
|
|
|
|
p += sprintf(p, "\n");
|
|
for (i = 0; i < n_cmd_devs; i++) {
|
|
struct pci_dev *dev = cmd_devs[i];
|
|
p = print_cmd64x_get_info(p, dev, i);
|
|
}
|
|
return p-buffer; /* => must be less than 4k! */
|
|
}
|
|
|
|
#endif /* defined(DISPLAY_CMD64X_TIMINGS) && defined(CONFIG_PROC_FS) */
|
|
|
|
/*
|
|
* Registers and masks for easy access by drive index:
|
|
*/
|
|
#if 0
|
|
static u8 prefetch_regs[4] = {CNTRL, CNTRL, ARTTIM23, ARTTIM23};
|
|
static u8 prefetch_masks[4] = {CNTRL_DIS_RA0, CNTRL_DIS_RA1, ARTTIM23_DIS_RA2, ARTTIM23_DIS_RA3};
|
|
#endif
|
|
|
|
/*
|
|
* This routine writes the prepared setup/active/recovery counts
|
|
* for a drive into the cmd646 chipset registers to active them.
|
|
*/
|
|
static void program_drive_counts (ide_drive_t *drive, int setup_count, int active_count, int recovery_count)
|
|
{
|
|
unsigned long flags;
|
|
struct pci_dev *dev = HWIF(drive)->pci_dev;
|
|
ide_drive_t *drives = HWIF(drive)->drives;
|
|
u8 temp_b;
|
|
static const u8 setup_counts[] = {0x40, 0x40, 0x40, 0x80, 0, 0xc0};
|
|
static const u8 recovery_counts[] =
|
|
{15, 15, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 0};
|
|
static const u8 arttim_regs[2][2] = {
|
|
{ ARTTIM0, ARTTIM1 },
|
|
{ ARTTIM23, ARTTIM23 }
|
|
};
|
|
static const u8 drwtim_regs[2][2] = {
|
|
{ DRWTIM0, DRWTIM1 },
|
|
{ DRWTIM2, DRWTIM3 }
|
|
};
|
|
int channel = (int) HWIF(drive)->channel;
|
|
int slave = (drives != drive); /* Is this really the best way to determine this?? */
|
|
|
|
cmdprintk("program_drive_count parameters = s(%d),a(%d),r(%d),p(%d)\n",
|
|
setup_count, active_count, recovery_count, drive->present);
|
|
/*
|
|
* Set up address setup count registers.
|
|
* Primary interface has individual count/timing registers for
|
|
* each drive. Secondary interface has one common set of registers,
|
|
* for address setup so we merge these timings, using the slowest
|
|
* value.
|
|
*/
|
|
if (channel) {
|
|
drive->drive_data = setup_count;
|
|
setup_count = max(drives[0].drive_data,
|
|
drives[1].drive_data);
|
|
cmdprintk("Secondary interface, setup_count = %d\n",
|
|
setup_count);
|
|
}
|
|
|
|
/*
|
|
* Convert values to internal chipset representation
|
|
*/
|
|
setup_count = (setup_count > 5) ? 0xc0 : (int) setup_counts[setup_count];
|
|
active_count &= 0xf; /* Remember, max value is 16 */
|
|
recovery_count = (int) recovery_counts[recovery_count];
|
|
|
|
cmdprintk("Final values = %d,%d,%d\n",
|
|
setup_count, active_count, recovery_count);
|
|
|
|
/*
|
|
* Now that everything is ready, program the new timings
|
|
*/
|
|
local_irq_save(flags);
|
|
/*
|
|
* Program the address_setup clocks into ARTTIM reg,
|
|
* and then the active/recovery counts into the DRWTIM reg
|
|
*/
|
|
(void) pci_read_config_byte(dev, arttim_regs[channel][slave], &temp_b);
|
|
(void) pci_write_config_byte(dev, arttim_regs[channel][slave],
|
|
((u8) setup_count) | (temp_b & 0x3f));
|
|
(void) pci_write_config_byte(dev, drwtim_regs[channel][slave],
|
|
(u8) ((active_count << 4) | recovery_count));
|
|
cmdprintk ("Write %x to %x\n",
|
|
((u8) setup_count) | (temp_b & 0x3f),
|
|
arttim_regs[channel][slave]);
|
|
cmdprintk ("Write %x to %x\n",
|
|
(u8) ((active_count << 4) | recovery_count),
|
|
drwtim_regs[channel][slave]);
|
|
local_irq_restore(flags);
|
|
}
|
|
|
|
/*
|
|
* Attempts to set the interface PIO mode.
|
|
* The preferred method of selecting PIO modes (e.g. mode 4) is
|
|
* "echo 'piomode:4' > /proc/ide/hdx/settings". Special cases are
|
|
* 8: prefetch off, 9: prefetch on, 255: auto-select best mode.
|
|
* Called with 255 at boot time.
|
|
*/
|
|
|
|
static void cmd64x_tuneproc (ide_drive_t *drive, u8 mode_wanted)
|
|
{
|
|
int setup_time, active_time, recovery_time;
|
|
int clock_time, pio_mode, cycle_time;
|
|
u8 recovery_count2, cycle_count;
|
|
int setup_count, active_count, recovery_count;
|
|
int bus_speed = system_bus_clock();
|
|
/*byte b;*/
|
|
ide_pio_data_t d;
|
|
|
|
switch (mode_wanted) {
|
|
case 8: /* set prefetch off */
|
|
case 9: /* set prefetch on */
|
|
mode_wanted &= 1;
|
|
/*set_prefetch_mode(index, mode_wanted);*/
|
|
cmdprintk("%s: %sabled cmd640 prefetch\n",
|
|
drive->name, mode_wanted ? "en" : "dis");
|
|
return;
|
|
}
|
|
|
|
mode_wanted = ide_get_best_pio_mode (drive, mode_wanted, 5, &d);
|
|
pio_mode = d.pio_mode;
|
|
cycle_time = d.cycle_time;
|
|
|
|
/*
|
|
* I copied all this complicated stuff from cmd640.c and made a few
|
|
* minor changes. For now I am just going to pray that it is correct.
|
|
*/
|
|
if (pio_mode > 5)
|
|
pio_mode = 5;
|
|
setup_time = ide_pio_timings[pio_mode].setup_time;
|
|
active_time = ide_pio_timings[pio_mode].active_time;
|
|
recovery_time = cycle_time - (setup_time + active_time);
|
|
clock_time = 1000 / bus_speed;
|
|
cycle_count = (cycle_time + clock_time - 1) / clock_time;
|
|
|
|
setup_count = (setup_time + clock_time - 1) / clock_time;
|
|
|
|
active_count = (active_time + clock_time - 1) / clock_time;
|
|
|
|
recovery_count = (recovery_time + clock_time - 1) / clock_time;
|
|
recovery_count2 = cycle_count - (setup_count + active_count);
|
|
if (recovery_count2 > recovery_count)
|
|
recovery_count = recovery_count2;
|
|
if (recovery_count > 16) {
|
|
active_count += recovery_count - 16;
|
|
recovery_count = 16;
|
|
}
|
|
if (active_count > 16)
|
|
active_count = 16; /* maximum allowed by cmd646 */
|
|
|
|
/*
|
|
* In a perfect world, we might set the drive pio mode here
|
|
* (using WIN_SETFEATURE) before continuing.
|
|
*
|
|
* But we do not, because:
|
|
* 1) this is the wrong place to do it
|
|
* (proper is do_special() in ide.c)
|
|
* 2) in practice this is rarely, if ever, necessary
|
|
*/
|
|
program_drive_counts (drive, setup_count, active_count, recovery_count);
|
|
|
|
cmdprintk("%s: selected cmd646 PIO mode%d : %d (%dns)%s, "
|
|
"clocks=%d/%d/%d\n",
|
|
drive->name, pio_mode, mode_wanted, cycle_time,
|
|
d.overridden ? " (overriding vendor mode)" : "",
|
|
setup_count, active_count, recovery_count);
|
|
}
|
|
|
|
static u8 cmd64x_ratemask (ide_drive_t *drive)
|
|
{
|
|
struct pci_dev *dev = HWIF(drive)->pci_dev;
|
|
u8 mode = 0;
|
|
|
|
switch(dev->device) {
|
|
case PCI_DEVICE_ID_CMD_649:
|
|
mode = 3;
|
|
break;
|
|
case PCI_DEVICE_ID_CMD_648:
|
|
mode = 2;
|
|
break;
|
|
case PCI_DEVICE_ID_CMD_643:
|
|
return 0;
|
|
|
|
case PCI_DEVICE_ID_CMD_646:
|
|
{
|
|
unsigned int class_rev = 0;
|
|
pci_read_config_dword(dev,
|
|
PCI_CLASS_REVISION, &class_rev);
|
|
class_rev &= 0xff;
|
|
/*
|
|
* UltraDMA only supported on PCI646U and PCI646U2, which
|
|
* correspond to revisions 0x03, 0x05 and 0x07 respectively.
|
|
* Actually, although the CMD tech support people won't
|
|
* tell me the details, the 0x03 revision cannot support
|
|
* UDMA correctly without hardware modifications, and even
|
|
* then it only works with Quantum disks due to some
|
|
* hold time assumptions in the 646U part which are fixed
|
|
* in the 646U2.
|
|
*
|
|
* So we only do UltraDMA on revision 0x05 and 0x07 chipsets.
|
|
*/
|
|
switch(class_rev) {
|
|
case 0x07:
|
|
case 0x05:
|
|
return 1;
|
|
case 0x03:
|
|
case 0x01:
|
|
default:
|
|
return 0;
|
|
}
|
|
}
|
|
}
|
|
if (!eighty_ninty_three(drive))
|
|
mode = min(mode, (u8)1);
|
|
return mode;
|
|
}
|
|
|
|
static void config_cmd64x_chipset_for_pio (ide_drive_t *drive, u8 set_speed)
|
|
{
|
|
u8 speed = 0x00;
|
|
u8 set_pio = ide_get_best_pio_mode(drive, 4, 5, NULL);
|
|
|
|
cmd64x_tuneproc(drive, set_pio);
|
|
speed = XFER_PIO_0 + set_pio;
|
|
if (set_speed)
|
|
(void) ide_config_drive_speed(drive, speed);
|
|
}
|
|
|
|
static void config_chipset_for_pio (ide_drive_t *drive, u8 set_speed)
|
|
{
|
|
config_cmd64x_chipset_for_pio(drive, set_speed);
|
|
}
|
|
|
|
static int cmd64x_tune_chipset (ide_drive_t *drive, u8 xferspeed)
|
|
{
|
|
ide_hwif_t *hwif = HWIF(drive);
|
|
struct pci_dev *dev = hwif->pci_dev;
|
|
|
|
u8 unit = (drive->select.b.unit & 0x01);
|
|
u8 regU = 0, pciU = (hwif->channel) ? UDIDETCR1 : UDIDETCR0;
|
|
u8 regD = 0, pciD = (hwif->channel) ? BMIDESR1 : BMIDESR0;
|
|
|
|
u8 speed = ide_rate_filter(cmd64x_ratemask(drive), xferspeed);
|
|
|
|
if (speed > XFER_PIO_4) {
|
|
(void) pci_read_config_byte(dev, pciD, ®D);
|
|
(void) pci_read_config_byte(dev, pciU, ®U);
|
|
regD &= ~(unit ? 0x40 : 0x20);
|
|
regU &= ~(unit ? 0xCA : 0x35);
|
|
(void) pci_write_config_byte(dev, pciD, regD);
|
|
(void) pci_write_config_byte(dev, pciU, regU);
|
|
(void) pci_read_config_byte(dev, pciD, ®D);
|
|
(void) pci_read_config_byte(dev, pciU, ®U);
|
|
}
|
|
|
|
switch(speed) {
|
|
case XFER_UDMA_5: regU |= (unit ? 0x0A : 0x05); break;
|
|
case XFER_UDMA_4: regU |= (unit ? 0x4A : 0x15); break;
|
|
case XFER_UDMA_3: regU |= (unit ? 0x8A : 0x25); break;
|
|
case XFER_UDMA_2: regU |= (unit ? 0x42 : 0x11); break;
|
|
case XFER_UDMA_1: regU |= (unit ? 0x82 : 0x21); break;
|
|
case XFER_UDMA_0: regU |= (unit ? 0xC2 : 0x31); break;
|
|
case XFER_MW_DMA_2: regD |= (unit ? 0x40 : 0x10); break;
|
|
case XFER_MW_DMA_1: regD |= (unit ? 0x80 : 0x20); break;
|
|
case XFER_MW_DMA_0: regD |= (unit ? 0xC0 : 0x30); break;
|
|
case XFER_SW_DMA_2: regD |= (unit ? 0x40 : 0x10); break;
|
|
case XFER_SW_DMA_1: regD |= (unit ? 0x80 : 0x20); break;
|
|
case XFER_SW_DMA_0: regD |= (unit ? 0xC0 : 0x30); break;
|
|
case XFER_PIO_4: cmd64x_tuneproc(drive, 4); break;
|
|
case XFER_PIO_3: cmd64x_tuneproc(drive, 3); break;
|
|
case XFER_PIO_2: cmd64x_tuneproc(drive, 2); break;
|
|
case XFER_PIO_1: cmd64x_tuneproc(drive, 1); break;
|
|
case XFER_PIO_0: cmd64x_tuneproc(drive, 0); break;
|
|
|
|
default:
|
|
return 1;
|
|
}
|
|
|
|
if (speed > XFER_PIO_4) {
|
|
(void) pci_write_config_byte(dev, pciU, regU);
|
|
regD |= (unit ? 0x40 : 0x20);
|
|
(void) pci_write_config_byte(dev, pciD, regD);
|
|
}
|
|
|
|
return (ide_config_drive_speed(drive, speed));
|
|
}
|
|
|
|
static int config_chipset_for_dma (ide_drive_t *drive)
|
|
{
|
|
u8 speed = ide_dma_speed(drive, cmd64x_ratemask(drive));
|
|
|
|
config_chipset_for_pio(drive, !speed);
|
|
|
|
if (!speed)
|
|
return 0;
|
|
|
|
if(ide_set_xfer_rate(drive, speed))
|
|
return 0;
|
|
|
|
if (!drive->init_speed)
|
|
drive->init_speed = speed;
|
|
|
|
return ide_dma_enable(drive);
|
|
}
|
|
|
|
static int cmd64x_config_drive_for_dma (ide_drive_t *drive)
|
|
{
|
|
ide_hwif_t *hwif = HWIF(drive);
|
|
struct hd_driveid *id = drive->id;
|
|
|
|
if ((id != NULL) && ((id->capability & 1) != 0) && drive->autodma) {
|
|
|
|
if (ide_use_dma(drive)) {
|
|
if (config_chipset_for_dma(drive))
|
|
return hwif->ide_dma_on(drive);
|
|
}
|
|
|
|
goto fast_ata_pio;
|
|
|
|
} else if ((id->capability & 8) || (id->field_valid & 2)) {
|
|
fast_ata_pio:
|
|
config_chipset_for_pio(drive, 1);
|
|
return hwif->ide_dma_off_quietly(drive);
|
|
}
|
|
/* IORDY not supported */
|
|
return 0;
|
|
}
|
|
|
|
static int cmd64x_alt_dma_status (struct pci_dev *dev)
|
|
{
|
|
switch(dev->device) {
|
|
case PCI_DEVICE_ID_CMD_648:
|
|
case PCI_DEVICE_ID_CMD_649:
|
|
return 1;
|
|
default:
|
|
break;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int cmd64x_ide_dma_end (ide_drive_t *drive)
|
|
{
|
|
u8 dma_stat = 0, dma_cmd = 0;
|
|
ide_hwif_t *hwif = HWIF(drive);
|
|
struct pci_dev *dev = hwif->pci_dev;
|
|
|
|
drive->waiting_for_dma = 0;
|
|
/* read DMA command state */
|
|
dma_cmd = hwif->INB(hwif->dma_command);
|
|
/* stop DMA */
|
|
hwif->OUTB((dma_cmd & ~1), hwif->dma_command);
|
|
/* get DMA status */
|
|
dma_stat = hwif->INB(hwif->dma_status);
|
|
/* clear the INTR & ERROR bits */
|
|
hwif->OUTB(dma_stat|6, hwif->dma_status);
|
|
if (cmd64x_alt_dma_status(dev)) {
|
|
u8 dma_intr = 0;
|
|
u8 dma_mask = (hwif->channel) ? ARTTIM23_INTR_CH1 :
|
|
CFR_INTR_CH0;
|
|
u8 dma_reg = (hwif->channel) ? ARTTIM2 : CFR;
|
|
(void) pci_read_config_byte(dev, dma_reg, &dma_intr);
|
|
/* clear the INTR bit */
|
|
(void) pci_write_config_byte(dev, dma_reg, dma_intr|dma_mask);
|
|
}
|
|
/* purge DMA mappings */
|
|
ide_destroy_dmatable(drive);
|
|
/* verify good DMA status */
|
|
return (dma_stat & 7) != 4;
|
|
}
|
|
|
|
static int cmd64x_ide_dma_test_irq (ide_drive_t *drive)
|
|
{
|
|
ide_hwif_t *hwif = HWIF(drive);
|
|
struct pci_dev *dev = hwif->pci_dev;
|
|
u8 dma_alt_stat = 0, mask = (hwif->channel) ? MRDMODE_INTR_CH1 :
|
|
MRDMODE_INTR_CH0;
|
|
u8 dma_stat = hwif->INB(hwif->dma_status);
|
|
|
|
(void) pci_read_config_byte(dev, MRDMODE, &dma_alt_stat);
|
|
#ifdef DEBUG
|
|
printk("%s: dma_stat: 0x%02x dma_alt_stat: "
|
|
"0x%02x mask: 0x%02x\n", drive->name,
|
|
dma_stat, dma_alt_stat, mask);
|
|
#endif
|
|
if (!(dma_alt_stat & mask))
|
|
return 0;
|
|
|
|
/* return 1 if INTR asserted */
|
|
if ((dma_stat & 4) == 4)
|
|
return 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* ASUS P55T2P4D with CMD646 chipset revision 0x01 requires the old
|
|
* event order for DMA transfers.
|
|
*/
|
|
|
|
static int cmd646_1_ide_dma_end (ide_drive_t *drive)
|
|
{
|
|
ide_hwif_t *hwif = HWIF(drive);
|
|
u8 dma_stat = 0, dma_cmd = 0;
|
|
|
|
drive->waiting_for_dma = 0;
|
|
/* get DMA status */
|
|
dma_stat = hwif->INB(hwif->dma_status);
|
|
/* read DMA command state */
|
|
dma_cmd = hwif->INB(hwif->dma_command);
|
|
/* stop DMA */
|
|
hwif->OUTB((dma_cmd & ~1), hwif->dma_command);
|
|
/* clear the INTR & ERROR bits */
|
|
hwif->OUTB(dma_stat|6, hwif->dma_status);
|
|
/* and free any DMA resources */
|
|
ide_destroy_dmatable(drive);
|
|
/* verify good DMA status */
|
|
return (dma_stat & 7) != 4;
|
|
}
|
|
|
|
static unsigned int __devinit init_chipset_cmd64x(struct pci_dev *dev, const char *name)
|
|
{
|
|
u32 class_rev = 0;
|
|
u8 mrdmode = 0;
|
|
|
|
pci_read_config_dword(dev, PCI_CLASS_REVISION, &class_rev);
|
|
class_rev &= 0xff;
|
|
|
|
#ifdef __i386__
|
|
if (dev->resource[PCI_ROM_RESOURCE].start) {
|
|
pci_write_config_dword(dev, PCI_ROM_ADDRESS, dev->resource[PCI_ROM_RESOURCE].start | PCI_ROM_ADDRESS_ENABLE);
|
|
printk(KERN_INFO "%s: ROM enabled at 0x%08lx\n", name, dev->resource[PCI_ROM_RESOURCE].start);
|
|
}
|
|
#endif
|
|
|
|
switch(dev->device) {
|
|
case PCI_DEVICE_ID_CMD_643:
|
|
break;
|
|
case PCI_DEVICE_ID_CMD_646:
|
|
printk(KERN_INFO "%s: chipset revision 0x%02X, ", name, class_rev);
|
|
switch(class_rev) {
|
|
case 0x07:
|
|
case 0x05:
|
|
printk("UltraDMA Capable");
|
|
break;
|
|
case 0x03:
|
|
printk("MultiWord DMA Force Limited");
|
|
break;
|
|
case 0x01:
|
|
default:
|
|
printk("MultiWord DMA Limited, IRQ workaround enabled");
|
|
break;
|
|
}
|
|
printk("\n");
|
|
break;
|
|
case PCI_DEVICE_ID_CMD_648:
|
|
case PCI_DEVICE_ID_CMD_649:
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
/* Set a good latency timer and cache line size value. */
|
|
(void) pci_write_config_byte(dev, PCI_LATENCY_TIMER, 64);
|
|
/* FIXME: pci_set_master() to ensure a good latency timer value */
|
|
|
|
/* Setup interrupts. */
|
|
(void) pci_read_config_byte(dev, MRDMODE, &mrdmode);
|
|
mrdmode &= ~(0x30);
|
|
(void) pci_write_config_byte(dev, MRDMODE, mrdmode);
|
|
|
|
/* Use MEMORY READ LINE for reads.
|
|
* NOTE: Although not mentioned in the PCI0646U specs,
|
|
* these bits are write only and won't be read
|
|
* back as set or not. The PCI0646U2 specs clarify
|
|
* this point.
|
|
*/
|
|
(void) pci_write_config_byte(dev, MRDMODE, mrdmode | 0x02);
|
|
|
|
/* Set reasonable active/recovery/address-setup values. */
|
|
(void) pci_write_config_byte(dev, ARTTIM0, 0x40);
|
|
(void) pci_write_config_byte(dev, DRWTIM0, 0x3f);
|
|
(void) pci_write_config_byte(dev, ARTTIM1, 0x40);
|
|
(void) pci_write_config_byte(dev, DRWTIM1, 0x3f);
|
|
#ifdef __i386__
|
|
(void) pci_write_config_byte(dev, ARTTIM23, 0x1c);
|
|
#else
|
|
(void) pci_write_config_byte(dev, ARTTIM23, 0x5c);
|
|
#endif
|
|
(void) pci_write_config_byte(dev, DRWTIM23, 0x3f);
|
|
(void) pci_write_config_byte(dev, DRWTIM3, 0x3f);
|
|
#ifdef CONFIG_PPC
|
|
(void) pci_write_config_byte(dev, UDIDETCR0, 0xf0);
|
|
#endif /* CONFIG_PPC */
|
|
|
|
#if defined(DISPLAY_CMD64X_TIMINGS) && defined(CONFIG_PROC_FS)
|
|
|
|
cmd_devs[n_cmd_devs++] = dev;
|
|
|
|
if (!cmd64x_proc) {
|
|
cmd64x_proc = 1;
|
|
ide_pci_create_host_proc("cmd64x", cmd64x_get_info);
|
|
}
|
|
#endif /* DISPLAY_CMD64X_TIMINGS && CONFIG_PROC_FS */
|
|
|
|
return 0;
|
|
}
|
|
|
|
static unsigned int __devinit ata66_cmd64x(ide_hwif_t *hwif)
|
|
{
|
|
u8 ata66 = 0, mask = (hwif->channel) ? 0x02 : 0x01;
|
|
|
|
switch(hwif->pci_dev->device) {
|
|
case PCI_DEVICE_ID_CMD_643:
|
|
case PCI_DEVICE_ID_CMD_646:
|
|
return ata66;
|
|
default:
|
|
break;
|
|
}
|
|
pci_read_config_byte(hwif->pci_dev, BMIDECSR, &ata66);
|
|
return (ata66 & mask) ? 1 : 0;
|
|
}
|
|
|
|
static void __devinit init_hwif_cmd64x(ide_hwif_t *hwif)
|
|
{
|
|
struct pci_dev *dev = hwif->pci_dev;
|
|
unsigned int class_rev;
|
|
|
|
hwif->autodma = 0;
|
|
pci_read_config_dword(dev, PCI_CLASS_REVISION, &class_rev);
|
|
class_rev &= 0xff;
|
|
|
|
hwif->tuneproc = &cmd64x_tuneproc;
|
|
hwif->speedproc = &cmd64x_tune_chipset;
|
|
|
|
if (!hwif->dma_base) {
|
|
hwif->drives[0].autotune = 1;
|
|
hwif->drives[1].autotune = 1;
|
|
return;
|
|
}
|
|
|
|
hwif->atapi_dma = 1;
|
|
|
|
hwif->ultra_mask = 0x3f;
|
|
hwif->mwdma_mask = 0x07;
|
|
hwif->swdma_mask = 0x07;
|
|
|
|
if (dev->device == PCI_DEVICE_ID_CMD_643)
|
|
hwif->ultra_mask = 0x80;
|
|
if (dev->device == PCI_DEVICE_ID_CMD_646)
|
|
hwif->ultra_mask = (class_rev > 0x04) ? 0x07 : 0x80;
|
|
if (dev->device == PCI_DEVICE_ID_CMD_648)
|
|
hwif->ultra_mask = 0x1f;
|
|
|
|
hwif->ide_dma_check = &cmd64x_config_drive_for_dma;
|
|
if (!(hwif->udma_four))
|
|
hwif->udma_four = ata66_cmd64x(hwif);
|
|
|
|
if (dev->device == PCI_DEVICE_ID_CMD_646) {
|
|
hwif->chipset = ide_cmd646;
|
|
if (class_rev == 0x01) {
|
|
hwif->ide_dma_end = &cmd646_1_ide_dma_end;
|
|
} else {
|
|
hwif->ide_dma_end = &cmd64x_ide_dma_end;
|
|
hwif->ide_dma_test_irq = &cmd64x_ide_dma_test_irq;
|
|
}
|
|
} else {
|
|
hwif->ide_dma_end = &cmd64x_ide_dma_end;
|
|
hwif->ide_dma_test_irq = &cmd64x_ide_dma_test_irq;
|
|
}
|
|
|
|
|
|
if (!noautodma)
|
|
hwif->autodma = 1;
|
|
hwif->drives[0].autodma = hwif->autodma;
|
|
hwif->drives[1].autodma = hwif->autodma;
|
|
}
|
|
|
|
static ide_pci_device_t cmd64x_chipsets[] __devinitdata = {
|
|
{ /* 0 */
|
|
.name = "CMD643",
|
|
.init_chipset = init_chipset_cmd64x,
|
|
.init_hwif = init_hwif_cmd64x,
|
|
.channels = 2,
|
|
.autodma = AUTODMA,
|
|
.bootable = ON_BOARD,
|
|
},{ /* 1 */
|
|
.name = "CMD646",
|
|
.init_chipset = init_chipset_cmd64x,
|
|
.init_hwif = init_hwif_cmd64x,
|
|
.channels = 2,
|
|
.autodma = AUTODMA,
|
|
.enablebits = {{0x00,0x00,0x00}, {0x51,0x80,0x80}},
|
|
.bootable = ON_BOARD,
|
|
},{ /* 2 */
|
|
.name = "CMD648",
|
|
.init_chipset = init_chipset_cmd64x,
|
|
.init_hwif = init_hwif_cmd64x,
|
|
.channels = 2,
|
|
.autodma = AUTODMA,
|
|
.bootable = ON_BOARD,
|
|
},{ /* 3 */
|
|
.name = "CMD649",
|
|
.init_chipset = init_chipset_cmd64x,
|
|
.init_hwif = init_hwif_cmd64x,
|
|
.channels = 2,
|
|
.autodma = AUTODMA,
|
|
.bootable = ON_BOARD,
|
|
}
|
|
};
|
|
|
|
static int __devinit cmd64x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
|
|
{
|
|
return ide_setup_pci_device(dev, &cmd64x_chipsets[id->driver_data]);
|
|
}
|
|
|
|
static struct pci_device_id cmd64x_pci_tbl[] = {
|
|
{ PCI_VENDOR_ID_CMD, PCI_DEVICE_ID_CMD_643, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
|
|
{ PCI_VENDOR_ID_CMD, PCI_DEVICE_ID_CMD_646, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1},
|
|
{ PCI_VENDOR_ID_CMD, PCI_DEVICE_ID_CMD_648, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 2},
|
|
{ PCI_VENDOR_ID_CMD, PCI_DEVICE_ID_CMD_649, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3},
|
|
{ 0, },
|
|
};
|
|
MODULE_DEVICE_TABLE(pci, cmd64x_pci_tbl);
|
|
|
|
static struct pci_driver driver = {
|
|
.name = "CMD64x_IDE",
|
|
.id_table = cmd64x_pci_tbl,
|
|
.probe = cmd64x_init_one,
|
|
};
|
|
|
|
static int cmd64x_ide_init(void)
|
|
{
|
|
return ide_pci_register_driver(&driver);
|
|
}
|
|
|
|
module_init(cmd64x_ide_init);
|
|
|
|
MODULE_AUTHOR("Eddie Dost, David Miller, Andre Hedrick");
|
|
MODULE_DESCRIPTION("PCI driver module for CMD64x IDE");
|
|
MODULE_LICENSE("GPL");
|