mirror of
https://github.com/torvalds/linux.git
synced 2024-12-25 12:21:37 +00:00
1141301c20
Do not assume the affinity to CPU0 if cpu phandle is omitted. Update the DT binding rules to reflect the same by changing it to a required property. Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Tested-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/0f7f4105d5ffea6ca4313271f3b3fee69da2106a.1562229018.git.saiprakash.ranjan@codeaurora.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
50 lines
1.9 KiB
Plaintext
50 lines
1.9 KiB
Plaintext
* CoreSight CPU Debug Component:
|
|
|
|
CoreSight CPU debug component are compliant with the ARMv8 architecture
|
|
reference manual (ARM DDI 0487A.k) Chapter 'Part H: External debug'. The
|
|
external debug module is mainly used for two modes: self-hosted debug and
|
|
external debug, and it can be accessed from mmio region from Coresight
|
|
and eventually the debug module connects with CPU for debugging. And the
|
|
debug module provides sample-based profiling extension, which can be used
|
|
to sample CPU program counter, secure state and exception level, etc;
|
|
usually every CPU has one dedicated debug module to be connected.
|
|
|
|
Required properties:
|
|
|
|
- compatible : should be "arm,coresight-cpu-debug"; supplemented with
|
|
"arm,primecell" since this driver is using the AMBA bus
|
|
interface.
|
|
|
|
- reg : physical base address and length of the register set.
|
|
|
|
- clocks : the clock associated to this component.
|
|
|
|
- clock-names : the name of the clock referenced by the code. Since we are
|
|
using the AMBA framework, the name of the clock providing
|
|
the interconnect should be "apb_pclk" and the clock is
|
|
mandatory. The interface between the debug logic and the
|
|
processor core is clocked by the internal CPU clock, so it
|
|
is enabled with CPU clock by default.
|
|
|
|
- cpu : the CPU phandle the debug module is affined to. Do not assume it
|
|
to default to CPU0 if omitted.
|
|
|
|
Optional properties:
|
|
|
|
- power-domains: a phandle to the debug power domain. We use "power-domains"
|
|
binding to turn on the debug logic if it has own dedicated
|
|
power domain and if necessary to use "cpuidle.off=1" or
|
|
"nohlt" in the kernel command line or sysfs node to
|
|
constrain idle states to ensure registers in the CPU power
|
|
domain are accessible.
|
|
|
|
Example:
|
|
|
|
debug@f6590000 {
|
|
compatible = "arm,coresight-cpu-debug","arm,primecell";
|
|
reg = <0 0xf6590000 0 0x1000>;
|
|
clocks = <&sys_ctrl HI6220_DAPB_CLK>;
|
|
clock-names = "apb_pclk";
|
|
cpu = <&cpu0>;
|
|
};
|