mirror of
https://github.com/torvalds/linux.git
synced 2024-12-25 12:21:37 +00:00
b686271407
Add RAM controller and RAM PHY controller DT bindings. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20210415105010.569620-17-claudiu.beznea@microchip.com
207 lines
6.1 KiB
Plaintext
207 lines
6.1 KiB
Plaintext
Atmel system registers
|
|
|
|
Chipid required properties:
|
|
- compatible: Should be "atmel,sama5d2-chipid" or "microchip,sama7g5-chipid"
|
|
- reg : Should contain registers location and length
|
|
|
|
PIT Timer required properties:
|
|
- compatible: Should be "atmel,at91sam9260-pit"
|
|
- reg: Should contain registers location and length
|
|
- interrupts: Should contain interrupt for the PIT which is the IRQ line
|
|
shared across all System Controller members.
|
|
|
|
PIT64B Timer required properties:
|
|
- compatible: Should be "microchip,sam9x60-pit64b"
|
|
- reg: Should contain registers location and length
|
|
- interrupts: Should contain interrupt for PIT64B timer
|
|
- clocks: Should contain the available clock sources for PIT64B timer.
|
|
|
|
System Timer (ST) required properties:
|
|
- compatible: Should be "atmel,at91rm9200-st", "syscon", "simple-mfd"
|
|
- reg: Should contain registers location and length
|
|
- interrupts: Should contain interrupt for the ST which is the IRQ line
|
|
shared across all System Controller members.
|
|
- clocks: phandle to input clock.
|
|
Its subnodes can be:
|
|
- watchdog: compatible should be "atmel,at91rm9200-wdt"
|
|
|
|
RSTC Reset Controller required properties:
|
|
- compatible: Should be "atmel,<chip>-rstc".
|
|
<chip> can be "at91sam9260", "at91sam9g45", "sama5d3" or "samx7"
|
|
it also can be "microchip,sam9x60-rstc"
|
|
- reg: Should contain registers location and length
|
|
- clocks: phandle to input clock.
|
|
|
|
Example:
|
|
|
|
rstc@fffffd00 {
|
|
compatible = "atmel,at91sam9260-rstc";
|
|
reg = <0xfffffd00 0x10>;
|
|
clocks = <&clk32k>;
|
|
};
|
|
|
|
RAMC SDRAM/DDR Controller required properties:
|
|
- compatible: Should be "atmel,at91rm9200-sdramc", "syscon"
|
|
"atmel,at91sam9260-sdramc",
|
|
"atmel,at91sam9g45-ddramc",
|
|
"atmel,sama5d3-ddramc",
|
|
"microchip,sam9x60-ddramc",
|
|
"microchip,sama7g5-uddrc"
|
|
- reg: Should contain registers location and length
|
|
|
|
Examples:
|
|
|
|
ramc0: ramc@ffffe800 {
|
|
compatible = "atmel,at91sam9g45-ddramc";
|
|
reg = <0xffffe800 0x200>;
|
|
};
|
|
|
|
RAMC PHY Controller required properties:
|
|
- compatible: Should be "microchip,sama7g5-ddr3phy", "syscon"
|
|
- reg: Should contain registers location and length
|
|
|
|
Example:
|
|
|
|
ddr3phy: ddr3phy@e3804000 {
|
|
compatible = "microchip,sama7g5-ddr3phy", "syscon";
|
|
reg = <0xe3804000 0x1000>;
|
|
};
|
|
|
|
SHDWC Shutdown Controller
|
|
|
|
required properties:
|
|
- compatible: Should be "atmel,<chip>-shdwc".
|
|
<chip> can be "at91sam9260", "at91sam9rl" or "at91sam9x5".
|
|
- reg: Should contain registers location and length
|
|
- clocks: phandle to input clock.
|
|
|
|
optional properties:
|
|
- atmel,wakeup-mode: String, operation mode of the wakeup mode.
|
|
Supported values are: "none", "high", "low", "any".
|
|
- atmel,wakeup-counter: Counter on Wake-up 0 (between 0x0 and 0xf).
|
|
|
|
optional at91sam9260 properties:
|
|
- atmel,wakeup-rtt-timer: boolean to enable Real-time Timer Wake-up.
|
|
|
|
optional at91sam9rl properties:
|
|
- atmel,wakeup-rtc-timer: boolean to enable Real-time Clock Wake-up.
|
|
- atmel,wakeup-rtt-timer: boolean to enable Real-time Timer Wake-up.
|
|
|
|
optional at91sam9x5 properties:
|
|
- atmel,wakeup-rtc-timer: boolean to enable Real-time Clock Wake-up.
|
|
|
|
Example:
|
|
|
|
shdwc@fffffd10 {
|
|
compatible = "atmel,at91sam9260-shdwc";
|
|
reg = <0xfffffd10 0x10>;
|
|
clocks = <&clk32k>;
|
|
};
|
|
|
|
SHDWC SAMA5D2-Compatible Shutdown Controller
|
|
|
|
1) shdwc node
|
|
|
|
required properties:
|
|
- compatible: should be "atmel,sama5d2-shdwc", "microchip,sam9x60-shdwc" or
|
|
"microchip,sama7g5-shdwc"
|
|
- reg: should contain registers location and length
|
|
- clocks: phandle to input clock.
|
|
- #address-cells: should be one. The cell is the wake-up input index.
|
|
- #size-cells: should be zero.
|
|
|
|
optional properties:
|
|
|
|
- debounce-delay-us: minimum wake-up inputs debouncer period in
|
|
microseconds. It's usually a board-related property.
|
|
- atmel,wakeup-rtc-timer: boolean to enable Real-Time Clock wake-up.
|
|
|
|
optional microchip,sam9x60-shdwc or microchip,sama7g5-shdwc properties:
|
|
- atmel,wakeup-rtt-timer: boolean to enable Real-time Timer Wake-up.
|
|
|
|
The node contains child nodes for each wake-up input that the platform uses.
|
|
|
|
2) input nodes
|
|
|
|
Wake-up input nodes are usually described in the "board" part of the Device
|
|
Tree. Note also that input 0 is linked to the wake-up pin and is frequently
|
|
used.
|
|
|
|
Required properties:
|
|
- reg: should contain the wake-up input index [0 - 15].
|
|
|
|
Optional properties:
|
|
- atmel,wakeup-active-high: boolean, the corresponding wake-up input described
|
|
by the child, forces the wake-up of the core power supply on a high level.
|
|
The default is to be active low.
|
|
|
|
Example:
|
|
|
|
On the SoC side:
|
|
shdwc@f8048010 {
|
|
compatible = "atmel,sama5d2-shdwc";
|
|
reg = <0xf8048010 0x10>;
|
|
clocks = <&clk32k>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
atmel,wakeup-rtc-timer;
|
|
};
|
|
|
|
On the board side:
|
|
shdwc@f8048010 {
|
|
debounce-delay-us = <976>;
|
|
|
|
input@0 {
|
|
reg = <0>;
|
|
};
|
|
|
|
input@1 {
|
|
reg = <1>;
|
|
atmel,wakeup-active-high;
|
|
};
|
|
};
|
|
|
|
Special Function Registers (SFR)
|
|
|
|
Special Function Registers (SFR) manage specific aspects of the integrated
|
|
memory, bridge implementations, processor and other functionality not controlled
|
|
elsewhere.
|
|
|
|
required properties:
|
|
- compatible: Should be "atmel,<chip>-sfr", "syscon" or
|
|
"atmel,<chip>-sfrbu", "syscon"
|
|
<chip> can be "sama5d3", "sama5d4" or "sama5d2".
|
|
It also can be "microchip,sam9x60-sfr", "syscon".
|
|
- reg: Should contain registers location and length
|
|
|
|
sfr@f0038000 {
|
|
compatible = "atmel,sama5d3-sfr", "syscon";
|
|
reg = <0xf0038000 0x60>;
|
|
};
|
|
|
|
Security Module (SECUMOD)
|
|
|
|
The Security Module macrocell provides all necessary secure functions to avoid
|
|
voltage, temperature, frequency and mechanical attacks on the chip. It also
|
|
embeds secure memories that can be scrambled.
|
|
|
|
The Security Module also offers the PIOBU pins which can be used as GPIO pins.
|
|
Note that they maintain their voltage during Backup/Self-refresh.
|
|
|
|
required properties:
|
|
- compatible: Should be "atmel,<chip>-secumod", "syscon".
|
|
<chip> can be "sama5d2".
|
|
- reg: Should contain registers location and length
|
|
- gpio-controller: Marks the port as GPIO controller.
|
|
- #gpio-cells: There are 2. The pin number is the
|
|
first, the second represents additional
|
|
parameters such as GPIO_ACTIVE_HIGH/LOW.
|
|
|
|
|
|
secumod@fc040000 {
|
|
compatible = "atmel,sama5d2-secumod", "syscon";
|
|
reg = <0xfc040000 0x100>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
};
|