Minki/linux
1
0
Fork 1
mirror of https://github.com/torvalds/linux.git synced 2024-11-23 04:31:50 +00:00
Code Issues Packages Projects Releases Wiki Activity
b24413180f
linux/drivers/pci/setup-res.c
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license 
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00

446 lines
12 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0
/*
* drivers/pci/setup-res.c
*
* Extruded from code written by
* Dave Rusling (david.rusling@reo.mts.dec.com)
* David Mosberger (davidm@cs.arizona.edu)
* David Miller (davem@redhat.com)
*
* Support routines for initializing a PCI subsystem.
*/
/* fixed for multiple pci buses, 1999 Andrea Arcangeli <andrea@suse.de> */
/*
* Nov 2000, Ivan Kokshaysky <ink@jurassic.park.msu.ru>
* Resource sorting
*/
#include <linux/kernel.h>
#include <linux/export.h>
#include <linux/pci.h>
#include <linux/errno.h>
#include <linux/ioport.h>
#include <linux/cache.h>
#include <linux/slab.h>
#include "pci.h"
static void pci_std_update_resource(struct pci_dev *dev, int resno)
{
struct pci_bus_region region;
bool disable;
u16 cmd;
u32 new, check, mask;
int reg;
struct resource *res = dev->resource + resno;
/* Per SR-IOV spec 3.4.1.11, VF BARs are RO zero */
if (dev->is_virtfn)
return;
/*
* Ignore resources for unimplemented BARs and unused resource slots
* for 64 bit BARs.
*/
if (!res->flags)
return;
if (res->flags & IORESOURCE_UNSET)
return;
/*
* Ignore non-moveable resources. This might be legacy resources for
* which no functional BAR register exists or another important
* system resource we shouldn't move around.
*/
if (res->flags & IORESOURCE_PCI_FIXED)
return;
pcibios_resource_to_bus(dev->bus, &region, res);
new = region.start;
if (res->flags & IORESOURCE_IO) {
mask = (u32)PCI_BASE_ADDRESS_IO_MASK;
new |= res->flags & ~PCI_BASE_ADDRESS_IO_MASK;
} else if (resno == PCI_ROM_RESOURCE) {
mask = PCI_ROM_ADDRESS_MASK;
} else {
mask = (u32)PCI_BASE_ADDRESS_MEM_MASK;
new |= res->flags & ~PCI_BASE_ADDRESS_MEM_MASK;
}
if (resno < PCI_ROM_RESOURCE) {
reg = PCI_BASE_ADDRESS_0 + 4 * resno;
} else if (resno == PCI_ROM_RESOURCE) {
/*
* Apparently some Matrox devices have ROM BARs that read
* as zero when disabled, so don't update ROM BARs unless
* they're enabled. See https://lkml.org/lkml/2005/8/30/138.
*/
if (!(res->flags & IORESOURCE_ROM_ENABLE))
return;
reg = dev->rom_base_reg;
new |= PCI_ROM_ADDRESS_ENABLE;
} else
return;
/*
* We can't update a 64-bit BAR atomically, so when possible,
* disable decoding so that a half-updated BAR won't conflict
* with another device.
*/
disable = (res->flags & IORESOURCE_MEM_64) && !dev->mmio_always_on;
if (disable) {
pci_read_config_word(dev, PCI_COMMAND, &cmd);
pci_write_config_word(dev, PCI_COMMAND,
cmd & ~PCI_COMMAND_MEMORY);
}
pci_write_config_dword(dev, reg, new);
pci_read_config_dword(dev, reg, &check);
if ((new ^ check) & mask) {
dev_err(&dev->dev, "BAR %d: error updating (%#08x != %#08x)\n",
resno, new, check);
}
if (res->flags & IORESOURCE_MEM_64) {
new = region.start >> 16 >> 16;
pci_write_config_dword(dev, reg + 4, new);
pci_read_config_dword(dev, reg + 4, &check);
if (check != new) {
dev_err(&dev->dev, "BAR %d: error updating (high %#08x != %#08x)\n",
resno, new, check);
}
}
if (disable)
pci_write_config_word(dev, PCI_COMMAND, cmd);
}
void pci_update_resource(struct pci_dev *dev, int resno)
{
if (resno <= PCI_ROM_RESOURCE)
pci_std_update_resource(dev, resno);
#ifdef CONFIG_PCI_IOV
else if (resno >= PCI_IOV_RESOURCES && resno <= PCI_IOV_RESOURCE_END)
pci_iov_update_resource(dev, resno);
#endif
}
int pci_claim_resource(struct pci_dev *dev, int resource)
{
struct resource *res = &dev->resource[resource];
struct resource *root, *conflict;
if (res->flags & IORESOURCE_UNSET) {
dev_info(&dev->dev, "can't claim BAR %d %pR: no address assigned\n",
resource, res);
return -EINVAL;
}
/*
* If we have a shadow copy in RAM, the PCI device doesn't respond
* to the shadow range, so we don't need to claim it, and upstream
* bridges don't need to route the range to the device.
*/
if (res->flags & IORESOURCE_ROM_SHADOW)
return 0;
root = pci_find_parent_resource(dev, res);
if (!root) {
dev_info(&dev->dev, "can't claim BAR %d %pR: no compatible bridge window\n",
resource, res);
res->flags |= IORESOURCE_UNSET;
return -EINVAL;
}
conflict = request_resource_conflict(root, res);
if (conflict) {
dev_info(&dev->dev, "can't claim BAR %d %pR: address conflict with %s %pR\n",
resource, res, conflict->name, conflict);
res->flags |= IORESOURCE_UNSET;
return -EBUSY;
}
return 0;
}
EXPORT_SYMBOL(pci_claim_resource);
void pci_disable_bridge_window(struct pci_dev *dev)
{
dev_info(&dev->dev, "disabling bridge mem windows\n");
/* MMIO Base/Limit */
pci_write_config_dword(dev, PCI_MEMORY_BASE, 0x0000fff0);
/* Prefetchable MMIO Base/Limit */
pci_write_config_dword(dev, PCI_PREF_LIMIT_UPPER32, 0);
pci_write_config_dword(dev, PCI_PREF_MEMORY_BASE, 0x0000fff0);
pci_write_config_dword(dev, PCI_PREF_BASE_UPPER32, 0xffffffff);
}
/*
* Generic function that returns a value indicating that the device's
* original BIOS BAR address was not saved and so is not available for
* reinstatement.
*
* Can be over-ridden by architecture specific code that implements
* reinstatement functionality rather than leaving it disabled when
* normal allocation attempts fail.
*/
resource_size_t __weak pcibios_retrieve_fw_addr(struct pci_dev *dev, int idx)
{
return 0;
}
static int pci_revert_fw_address(struct resource *res, struct pci_dev *dev,
int resno, resource_size_t size)
{
struct resource *root, *conflict;
resource_size_t fw_addr, start, end;
fw_addr = pcibios_retrieve_fw_addr(dev, resno);
if (!fw_addr)
return -ENOMEM;
start = res->start;
end = res->end;
res->start = fw_addr;
res->end = res->start + size - 1;
res->flags &= ~IORESOURCE_UNSET;
root = pci_find_parent_resource(dev, res);
if (!root) {
if (res->flags & IORESOURCE_IO)
root = &ioport_resource;
else
root = &iomem_resource;
}
dev_info(&dev->dev, "BAR %d: trying firmware assignment %pR\n",
resno, res);
conflict = request_resource_conflict(root, res);
if (conflict) {
dev_info(&dev->dev, "BAR %d: %pR conflicts with %s %pR\n",
resno, res, conflict->name, conflict);
res->start = start;
res->end = end;
res->flags |= IORESOURCE_UNSET;
return -EBUSY;
}
return 0;
}
/*
* We don't have to worry about legacy ISA devices, so nothing to do here.
* This is marked as __weak because multiple architectures define it; it should
* eventually go away.
*/
resource_size_t __weak pcibios_align_resource(void *data,
const struct resource *res,
resource_size_t size,
resource_size_t align)
{
return res->start;
}
static int __pci_assign_resource(struct pci_bus *bus, struct pci_dev *dev,
int resno, resource_size_t size, resource_size_t align)
{
struct resource *res = dev->resource + resno;
resource_size_t min;
int ret;
min = (res->flags & IORESOURCE_IO) ? PCIBIOS_MIN_IO : PCIBIOS_MIN_MEM;
/*
* First, try exact prefetching match. Even if a 64-bit
* prefetchable bridge window is below 4GB, we can't put a 32-bit
* prefetchable resource in it because pbus_size_mem() assumes a
* 64-bit window will contain no 32-bit resources. If we assign
* things differently than they were sized, not everything will fit.
*/
ret = pci_bus_alloc_resource(bus, res, size, align, min,
IORESOURCE_PREFETCH | IORESOURCE_MEM_64,
pcibios_align_resource, dev);
if (ret == 0)
return 0;
/*
* If the prefetchable window is only 32 bits wide, we can put
* 64-bit prefetchable resources in it.
*/
if ((res->flags & (IORESOURCE_PREFETCH | IORESOURCE_MEM_64)) ==
(IORESOURCE_PREFETCH | IORESOURCE_MEM_64)) {
ret = pci_bus_alloc_resource(bus, res, size, align, min,
IORESOURCE_PREFETCH,
pcibios_align_resource, dev);
if (ret == 0)
return 0;
}
/*
* If we didn't find a better match, we can put any memory resource
* in a non-prefetchable window. If this resource is 32 bits and
* non-prefetchable, the first call already tried the only possibility
* so we don't need to try again.
*/
if (res->flags & (IORESOURCE_PREFETCH | IORESOURCE_MEM_64))
ret = pci_bus_alloc_resource(bus, res, size, align, min, 0,
pcibios_align_resource, dev);
return ret;
}
static int _pci_assign_resource(struct pci_dev *dev, int resno,
resource_size_t size, resource_size_t min_align)
{
struct pci_bus *bus;
int ret;
bus = dev->bus;
while ((ret = __pci_assign_resource(bus, dev, resno, size, min_align))) {
if (!bus->parent || !bus->self->transparent)
break;
bus = bus->parent;
}
return ret;
}
int pci_assign_resource(struct pci_dev *dev, int resno)
{
struct resource *res = dev->resource + resno;
resource_size_t align, size;
int ret;
if (res->flags & IORESOURCE_PCI_FIXED)
return 0;
res->flags |= IORESOURCE_UNSET;
align = pci_resource_alignment(dev, res);
if (!align) {
dev_info(&dev->dev, "BAR %d: can't assign %pR (bogus alignment)\n",
resno, res);
return -EINVAL;
}
size = resource_size(res);
ret = _pci_assign_resource(dev, resno, size, align);
/*
* If we failed to assign anything, let's try the address
* where firmware left it. That at least has a chance of
* working, which is better than just leaving it disabled.
*/
if (ret < 0) {
dev_info(&dev->dev, "BAR %d: no space for %pR\n", resno, res);
ret = pci_revert_fw_address(res, dev, resno, size);
}
if (ret < 0) {
dev_info(&dev->dev, "BAR %d: failed to assign %pR\n", resno,
res);
return ret;
}
res->flags &= ~IORESOURCE_UNSET;
res->flags &= ~IORESOURCE_STARTALIGN;
dev_info(&dev->dev, "BAR %d: assigned %pR\n", resno, res);
if (resno < PCI_BRIDGE_RESOURCES)
pci_update_resource(dev, resno);
return 0;
}
EXPORT_SYMBOL(pci_assign_resource);
int pci_reassign_resource(struct pci_dev *dev, int resno, resource_size_t addsize,
resource_size_t min_align)
{
struct resource *res = dev->resource + resno;
unsigned long flags;
resource_size_t new_size;
int ret;
if (res->flags & IORESOURCE_PCI_FIXED)
return 0;
flags = res->flags;
res->flags |= IORESOURCE_UNSET;
if (!res->parent) {
dev_info(&dev->dev, "BAR %d: can't reassign an unassigned resource %pR\n",
resno, res);
return -EINVAL;
}
/* already aligned with min_align */
new_size = resource_size(res) + addsize;
ret = _pci_assign_resource(dev, resno, new_size, min_align);
if (ret) {
res->flags = flags;
dev_info(&dev->dev, "BAR %d: %pR (failed to expand by %#llx)\n",
resno, res, (unsigned long long) addsize);
return ret;
}
res->flags &= ~IORESOURCE_UNSET;
res->flags &= ~IORESOURCE_STARTALIGN;
dev_info(&dev->dev, "BAR %d: reassigned %pR (expanded by %#llx)\n",
resno, res, (unsigned long long) addsize);
if (resno < PCI_BRIDGE_RESOURCES)
pci_update_resource(dev, resno);
return 0;
}
int pci_enable_resources(struct pci_dev *dev, int mask)
{
u16 cmd, old_cmd;
int i;
struct resource *r;
pci_read_config_word(dev, PCI_COMMAND, &cmd);
old_cmd = cmd;
for (i = 0; i < PCI_NUM_RESOURCES; i++) {
if (!(mask & (1 << i)))
continue;
r = &dev->resource[i];
if (!(r->flags & (IORESOURCE_IO | IORESOURCE_MEM)))
continue;
if ((i == PCI_ROM_RESOURCE) &&
(!(r->flags & IORESOURCE_ROM_ENABLE)))
continue;
if (r->flags & IORESOURCE_UNSET) {
dev_err(&dev->dev, "can't enable device: BAR %d %pR not assigned\n",
i, r);
return -EINVAL;
}
if (!r->parent) {
dev_err(&dev->dev, "can't enable device: BAR %d %pR not claimed\n",
i, r);
return -EINVAL;
}
if (r->flags & IORESOURCE_IO)
cmd |= PCI_COMMAND_IO;
if (r->flags & IORESOURCE_MEM)
cmd |= PCI_COMMAND_MEMORY;
}
if (cmd != old_cmd) {
dev_info(&dev->dev, "enabling device (%04x -> %04x)\n",
old_cmd, cmd);
pci_write_config_word(dev, PCI_COMMAND, cmd);
}
return 0;
}
Reference in New Issue View Git Blame Copy Permalink