linux/arch/x86/xen/time.c
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00

462 lines
12 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* Xen time implementation.
*
* This is implemented in terms of a clocksource driver which uses
* the hypervisor clock as a nanosecond timebase, and a clockevent
* driver which uses the hypervisor's timer mechanism.
*
* Jeremy Fitzhardinge <jeremy@xensource.com>, XenSource Inc, 2007
*/
#include <linux/kernel.h>
#include <linux/interrupt.h>
#include <linux/clocksource.h>
#include <linux/clockchips.h>
#include <linux/gfp.h>
#include <linux/slab.h>
#include <linux/pvclock_gtod.h>
#include <linux/timekeeper_internal.h>
#include <asm/pvclock.h>
#include <asm/xen/hypervisor.h>
#include <asm/xen/hypercall.h>
#include <xen/events.h>
#include <xen/features.h>
#include <xen/interface/xen.h>
#include <xen/interface/vcpu.h>
#include "xen-ops.h"
/* Xen may fire a timer up to this many ns early */
#define TIMER_SLOP 100000
/* Get the TSC speed from Xen */
static unsigned long xen_tsc_khz(void)
{
struct pvclock_vcpu_time_info *info =
&HYPERVISOR_shared_info->vcpu_info[0].time;
return pvclock_tsc_khz(info);
}
u64 xen_clocksource_read(void)
{
struct pvclock_vcpu_time_info *src;
u64 ret;
preempt_disable_notrace();
src = &__this_cpu_read(xen_vcpu)->time;
ret = pvclock_clocksource_read(src);
preempt_enable_notrace();
return ret;
}
static u64 xen_clocksource_get_cycles(struct clocksource *cs)
{
return xen_clocksource_read();
}
static void xen_read_wallclock(struct timespec *ts)
{
struct shared_info *s = HYPERVISOR_shared_info;
struct pvclock_wall_clock *wall_clock = &(s->wc);
struct pvclock_vcpu_time_info *vcpu_time;
vcpu_time = &get_cpu_var(xen_vcpu)->time;
pvclock_read_wallclock(wall_clock, vcpu_time, ts);
put_cpu_var(xen_vcpu);
}
static void xen_get_wallclock(struct timespec *now)
{
xen_read_wallclock(now);
}
static int xen_set_wallclock(const struct timespec *now)
{
return -1;
}
static int xen_pvclock_gtod_notify(struct notifier_block *nb,
unsigned long was_set, void *priv)
{
/* Protected by the calling core code serialization */
static struct timespec64 next_sync;
struct xen_platform_op op;
struct timespec64 now;
struct timekeeper *tk = priv;
static bool settime64_supported = true;
int ret;
now.tv_sec = tk->xtime_sec;
now.tv_nsec = (long)(tk->tkr_mono.xtime_nsec >> tk->tkr_mono.shift);
/*
* We only take the expensive HV call when the clock was set
* or when the 11 minutes RTC synchronization time elapsed.
*/
if (!was_set && timespec64_compare(&now, &next_sync) < 0)
return NOTIFY_OK;
again:
if (settime64_supported) {
op.cmd = XENPF_settime64;
op.u.settime64.mbz = 0;
op.u.settime64.secs = now.tv_sec;
op.u.settime64.nsecs = now.tv_nsec;
op.u.settime64.system_time = xen_clocksource_read();
} else {
op.cmd = XENPF_settime32;
op.u.settime32.secs = now.tv_sec;
op.u.settime32.nsecs = now.tv_nsec;
op.u.settime32.system_time = xen_clocksource_read();
}
ret = HYPERVISOR_platform_op(&op);
if (ret == -ENOSYS && settime64_supported) {
settime64_supported = false;
goto again;
}
if (ret < 0)
return NOTIFY_BAD;
/*
* Move the next drift compensation time 11 minutes
* ahead. That's emulating the sync_cmos_clock() update for
* the hardware RTC.
*/
next_sync = now;
next_sync.tv_sec += 11 * 60;
return NOTIFY_OK;
}
static struct notifier_block xen_pvclock_gtod_notifier = {
.notifier_call = xen_pvclock_gtod_notify,
};
static struct clocksource xen_clocksource __read_mostly = {
.name = "xen",
.rating = 400,
.read = xen_clocksource_get_cycles,
.mask = ~0,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
/*
Xen clockevent implementation
Xen has two clockevent implementations:
The old timer_op one works with all released versions of Xen prior
to version 3.0.4. This version of the hypervisor provides a
single-shot timer with nanosecond resolution. However, sharing the
same event channel is a 100Hz tick which is delivered while the
vcpu is running. We don't care about or use this tick, but it will
cause the core time code to think the timer fired too soon, and
will end up resetting it each time. It could be filtered, but
doing so has complications when the ktime clocksource is not yet
the xen clocksource (ie, at boot time).
The new vcpu_op-based timer interface allows the tick timer period
to be changed or turned off. The tick timer is not useful as a
periodic timer because events are only delivered to running vcpus.
The one-shot timer can report when a timeout is in the past, so
set_next_event is capable of returning -ETIME when appropriate.
This interface is used when available.
*/
/*
Get a hypervisor absolute time. In theory we could maintain an
offset between the kernel's time and the hypervisor's time, and
apply that to a kernel's absolute timeout. Unfortunately the
hypervisor and kernel times can drift even if the kernel is using
the Xen clocksource, because ntp can warp the kernel's clocksource.
*/
static s64 get_abs_timeout(unsigned long delta)
{
return xen_clocksource_read() + delta;
}
static int xen_timerop_shutdown(struct clock_event_device *evt)
{
/* cancel timeout */
HYPERVISOR_set_timer_op(0);
return 0;
}
static int xen_timerop_set_next_event(unsigned long delta,
struct clock_event_device *evt)
{
WARN_ON(!clockevent_state_oneshot(evt));
if (HYPERVISOR_set_timer_op(get_abs_timeout(delta)) < 0)
BUG();
/* We may have missed the deadline, but there's no real way of
knowing for sure. If the event was in the past, then we'll
get an immediate interrupt. */
return 0;
}
static const struct clock_event_device xen_timerop_clockevent = {
.name = "xen",
.features = CLOCK_EVT_FEAT_ONESHOT,
.max_delta_ns = 0xffffffff,
.max_delta_ticks = 0xffffffff,
.min_delta_ns = TIMER_SLOP,
.min_delta_ticks = TIMER_SLOP,
.mult = 1,
.shift = 0,
.rating = 500,
.set_state_shutdown = xen_timerop_shutdown,
.set_next_event = xen_timerop_set_next_event,
};
static int xen_vcpuop_shutdown(struct clock_event_device *evt)
{
int cpu = smp_processor_id();
if (HYPERVISOR_vcpu_op(VCPUOP_stop_singleshot_timer, xen_vcpu_nr(cpu),
NULL) ||
HYPERVISOR_vcpu_op(VCPUOP_stop_periodic_timer, xen_vcpu_nr(cpu),
NULL))
BUG();
return 0;
}
static int xen_vcpuop_set_oneshot(struct clock_event_device *evt)
{
int cpu = smp_processor_id();
if (HYPERVISOR_vcpu_op(VCPUOP_stop_periodic_timer, xen_vcpu_nr(cpu),
NULL))
BUG();
return 0;
}
static int xen_vcpuop_set_next_event(unsigned long delta,
struct clock_event_device *evt)
{
int cpu = smp_processor_id();
struct vcpu_set_singleshot_timer single;
int ret;
WARN_ON(!clockevent_state_oneshot(evt));
single.timeout_abs_ns = get_abs_timeout(delta);
/* Get an event anyway, even if the timeout is already expired */
single.flags = 0;
ret = HYPERVISOR_vcpu_op(VCPUOP_set_singleshot_timer, xen_vcpu_nr(cpu),
&single);
BUG_ON(ret != 0);
return ret;
}
static const struct clock_event_device xen_vcpuop_clockevent = {
.name = "xen",
.features = CLOCK_EVT_FEAT_ONESHOT,
.max_delta_ns = 0xffffffff,
.max_delta_ticks = 0xffffffff,
.min_delta_ns = TIMER_SLOP,
.min_delta_ticks = TIMER_SLOP,
.mult = 1,
.shift = 0,
.rating = 500,
.set_state_shutdown = xen_vcpuop_shutdown,
.set_state_oneshot = xen_vcpuop_set_oneshot,
.set_next_event = xen_vcpuop_set_next_event,
};
static const struct clock_event_device *xen_clockevent =
&xen_timerop_clockevent;
struct xen_clock_event_device {
struct clock_event_device evt;
char name[16];
};
static DEFINE_PER_CPU(struct xen_clock_event_device, xen_clock_events) = { .evt.irq = -1 };
static irqreturn_t xen_timer_interrupt(int irq, void *dev_id)
{
struct clock_event_device *evt = this_cpu_ptr(&xen_clock_events.evt);
irqreturn_t ret;
ret = IRQ_NONE;
if (evt->event_handler) {
evt->event_handler(evt);
ret = IRQ_HANDLED;
}
return ret;
}
void xen_teardown_timer(int cpu)
{
struct clock_event_device *evt;
evt = &per_cpu(xen_clock_events, cpu).evt;
if (evt->irq >= 0) {
unbind_from_irqhandler(evt->irq, NULL);
evt->irq = -1;
}
}
void xen_setup_timer(int cpu)
{
struct xen_clock_event_device *xevt = &per_cpu(xen_clock_events, cpu);
struct clock_event_device *evt = &xevt->evt;
int irq;
WARN(evt->irq >= 0, "IRQ%d for CPU%d is already allocated\n", evt->irq, cpu);
if (evt->irq >= 0)
xen_teardown_timer(cpu);
printk(KERN_INFO "installing Xen timer for CPU %d\n", cpu);
snprintf(xevt->name, sizeof(xevt->name), "timer%d", cpu);
irq = bind_virq_to_irqhandler(VIRQ_TIMER, cpu, xen_timer_interrupt,
IRQF_PERCPU|IRQF_NOBALANCING|IRQF_TIMER|
IRQF_FORCE_RESUME|IRQF_EARLY_RESUME,
xevt->name, NULL);
(void)xen_set_irq_priority(irq, XEN_IRQ_PRIORITY_MAX);
memcpy(evt, xen_clockevent, sizeof(*evt));
evt->cpumask = cpumask_of(cpu);
evt->irq = irq;
}
void xen_setup_cpu_clockevents(void)
{
clockevents_register_device(this_cpu_ptr(&xen_clock_events.evt));
}
void xen_timer_resume(void)
{
int cpu;
pvclock_resume();
if (xen_clockevent != &xen_vcpuop_clockevent)
return;
for_each_online_cpu(cpu) {
if (HYPERVISOR_vcpu_op(VCPUOP_stop_periodic_timer,
xen_vcpu_nr(cpu), NULL))
BUG();
}
}
static const struct pv_time_ops xen_time_ops __initconst = {
.sched_clock = xen_clocksource_read,
.steal_clock = xen_steal_clock,
};
static void __init xen_time_init(void)
{
int cpu = smp_processor_id();
struct timespec tp;
/* As Dom0 is never moved, no penalty on using TSC there */
if (xen_initial_domain())
xen_clocksource.rating = 275;
clocksource_register_hz(&xen_clocksource, NSEC_PER_SEC);
if (HYPERVISOR_vcpu_op(VCPUOP_stop_periodic_timer, xen_vcpu_nr(cpu),
NULL) == 0) {
/* Successfully turned off 100Hz tick, so we have the
vcpuop-based timer interface */
printk(KERN_DEBUG "Xen: using vcpuop timer interface\n");
xen_clockevent = &xen_vcpuop_clockevent;
}
/* Set initial system time with full resolution */
xen_read_wallclock(&tp);
do_settimeofday(&tp);
setup_force_cpu_cap(X86_FEATURE_TSC);
xen_setup_runstate_info(cpu);
xen_setup_timer(cpu);
xen_setup_cpu_clockevents();
xen_time_setup_guest();
if (xen_initial_domain())
pvclock_gtod_register_notifier(&xen_pvclock_gtod_notifier);
}
void __ref xen_init_time_ops(void)
{
pv_time_ops = xen_time_ops;
x86_init.timers.timer_init = xen_time_init;
x86_init.timers.setup_percpu_clockev = x86_init_noop;
x86_cpuinit.setup_percpu_clockev = x86_init_noop;
x86_platform.calibrate_tsc = xen_tsc_khz;
x86_platform.get_wallclock = xen_get_wallclock;
/* Dom0 uses the native method to set the hardware RTC. */
if (!xen_initial_domain())
x86_platform.set_wallclock = xen_set_wallclock;
}
#ifdef CONFIG_XEN_PVHVM
static void xen_hvm_setup_cpu_clockevents(void)
{
int cpu = smp_processor_id();
xen_setup_runstate_info(cpu);
/*
* xen_setup_timer(cpu) - snprintf is bad in atomic context. Hence
* doing it xen_hvm_cpu_notify (which gets called by smp_init during
* early bootup and also during CPU hotplug events).
*/
xen_setup_cpu_clockevents();
}
void __init xen_hvm_init_time_ops(void)
{
/*
* vector callback is needed otherwise we cannot receive interrupts
* on cpu > 0 and at this point we don't know how many cpus are
* available.
*/
if (!xen_have_vector_callback)
return;
if (!xen_feature(XENFEAT_hvm_safe_pvclock)) {
printk(KERN_INFO "Xen doesn't support pvclock on HVM,"
"disable pv timer\n");
return;
}
pv_time_ops = xen_time_ops;
x86_init.timers.setup_percpu_clockev = xen_time_init;
x86_cpuinit.setup_percpu_clockev = xen_hvm_setup_cpu_clockevents;
x86_platform.calibrate_tsc = xen_tsc_khz;
x86_platform.get_wallclock = xen_get_wallclock;
x86_platform.set_wallclock = xen_set_wallclock;
}
#endif