mirror of
https://github.com/torvalds/linux.git
synced 2024-12-30 23:02:08 +00:00
18d59893eb
This patch adds documentation of device tree bindings for the STM32 MDMA controller. Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@gmail.com> Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
95 lines
3.2 KiB
Plaintext
95 lines
3.2 KiB
Plaintext
* STMicroelectronics STM32 MDMA controller
|
|
|
|
The STM32 MDMA is a general-purpose direct memory access controller capable of
|
|
supporting 64 independent DMA channels with 256 HW requests.
|
|
|
|
Required properties:
|
|
- compatible: Should be "st,stm32h7-mdma"
|
|
- reg: Should contain MDMA registers location and length. This should include
|
|
all of the per-channel registers.
|
|
- interrupts: Should contain the MDMA interrupt.
|
|
- clocks: Should contain the input clock of the DMA instance.
|
|
- resets: Reference to a reset controller asserting the DMA controller.
|
|
- #dma-cells : Must be <5>. See DMA client paragraph for more details.
|
|
|
|
Optional properties:
|
|
- dma-channels: Number of DMA channels supported by the controller.
|
|
- dma-requests: Number of DMA request signals supported by the controller.
|
|
- st,ahb-addr-masks: Array of u32 mask to list memory devices addressed via
|
|
AHB bus.
|
|
|
|
Example:
|
|
|
|
mdma1: dma@52000000 {
|
|
compatible = "st,stm32h7-mdma";
|
|
reg = <0x52000000 0x1000>;
|
|
interrupts = <122>;
|
|
clocks = <&timer_clk>;
|
|
resets = <&rcc 992>;
|
|
#dma-cells = <5>;
|
|
dma-channels = <16>;
|
|
dma-requests = <32>;
|
|
st,ahb-addr-masks = <0x20000000>, <0x00000000>;
|
|
};
|
|
|
|
* DMA client
|
|
|
|
DMA clients connected to the STM32 MDMA controller must use the format
|
|
described in the dma.txt file, using a five-cell specifier for each channel:
|
|
a phandle to the MDMA controller plus the following five integer cells:
|
|
|
|
1. The request line number
|
|
2. The priority level
|
|
0x00: Low
|
|
0x01: Medium
|
|
0x10: High
|
|
0x11: Very high
|
|
3. A 32bit mask specifying the DMA channel configuration
|
|
-bit 0-1: Source increment mode
|
|
0x00: Source address pointer is fixed
|
|
0x10: Source address pointer is incremented after each data transfer
|
|
0x11: Source address pointer is decremented after each data transfer
|
|
-bit 2-3: Destination increment mode
|
|
0x00: Destination address pointer is fixed
|
|
0x10: Destination address pointer is incremented after each data
|
|
transfer
|
|
0x11: Destination address pointer is decremented after each data
|
|
transfer
|
|
-bit 8-9: Source increment offset size
|
|
0x00: byte (8bit)
|
|
0x01: half-word (16bit)
|
|
0x10: word (32bit)
|
|
0x11: double-word (64bit)
|
|
-bit 10-11: Destination increment offset size
|
|
0x00: byte (8bit)
|
|
0x01: half-word (16bit)
|
|
0x10: word (32bit)
|
|
0x11: double-word (64bit)
|
|
-bit 25-18: The number of bytes to be transferred in a single transfer
|
|
(min = 1 byte, max = 128 bytes)
|
|
-bit 29:28: Trigger Mode
|
|
0x00: Each MDMA request triggers a buffer transfer (max 128 bytes)
|
|
0x01: Each MDMA request triggers a block transfer (max 64K bytes)
|
|
0x10: Each MDMA request triggers a repeated block transfer
|
|
0x11: Each MDMA request triggers a linked list transfer
|
|
4. A 32bit value specifying the register to be used to acknowledge the request
|
|
if no HW ack signal is used by the MDMA client
|
|
5. A 32bit mask specifying the value to be written to acknowledge the request
|
|
if no HW ack signal is used by the MDMA client
|
|
|
|
Example:
|
|
|
|
i2c4: i2c@5c002000 {
|
|
compatible = "st,stm32f7-i2c";
|
|
reg = <0x5c002000 0x400>;
|
|
interrupts = <95>,
|
|
<96>;
|
|
clocks = <&timer_clk>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
dmas = <&mdma1 36 0x0 0x40008 0x0 0x0>,
|
|
<&mdma1 37 0x0 0x40002 0x0 0x0>;
|
|
dma-names = "rx", "tx";
|
|
status = "disabled";
|
|
};
|