linux/drivers/ssb/pcihost_wrapper.c
Andrey Skvortsov 5580373fb2 SSB / B44: fix WOL for BCM4401
Wake On Lan was not working on laptop DELL Vostro 1500.
If WOL was turned on, BCM4401 was powered up in suspend mode. LEDs blinked.
But the laptop could not be woken up with the Magic Packet. The reason for
that was that PCIE was not enabled as a system wakeup source and
therefore the host PCI bridge was not powered up in suspend mode.
PCIE was not enabled in suspend by PM because no child devices were
registered as wakeup source during suspend process.
On laptop BCM4401 is connected through the SSB bus, that is connected to the
PCI-Express bus. SSB and B44 did not use standard PM wakeup functions
and did not forward wakeup settings to their parents.
To fix that B44 driver enables PM wakeup and registers new wakeup source
using device_set_wakeup_enable(). Wakeup is automatically reported to the parent SSB
bus via power.wakeup_path. SSB bus enables wakeup for the parent PCI bridge, if there is any
child devices with enabled wakeup functionality. All other steps are
done by PM core code.

Signed-off-by: Andrey Skvortsov <Andrej.Skvortzov@gmail.com>
Signed-off-by: Michael Buesch <m@bues.ch>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-12-04 11:32:46 -05:00

135 lines
2.9 KiB
C

/*
* Sonics Silicon Backplane
* PCI Hostdevice wrapper
*
* Copyright (c) 2005 Martin Langer <martin-langer@gmx.de>
* Copyright (c) 2005 Stefano Brivio <st3@riseup.net>
* Copyright (c) 2005 Danny van Dyk <kugelfang@gentoo.org>
* Copyright (c) 2005 Andreas Jaggi <andreas.jaggi@waterwave.ch>
* Copyright (c) 2005-2007 Michael Buesch <m@bues.ch>
*
* Licensed under the GNU/GPL. See COPYING for details.
*/
#include <linux/pm.h>
#include <linux/pci.h>
#include <linux/export.h>
#include <linux/slab.h>
#include <linux/ssb/ssb.h>
#ifdef CONFIG_PM_SLEEP
static int ssb_pcihost_suspend(struct device *d)
{
struct pci_dev *dev = to_pci_dev(d);
struct ssb_bus *ssb = pci_get_drvdata(dev);
int err;
err = ssb_bus_suspend(ssb);
if (err)
return err;
pci_save_state(dev);
pci_disable_device(dev);
/* if there is a wakeup enabled child device on ssb bus,
enable pci wakeup posibility. */
device_set_wakeup_enable(d, d->power.wakeup_path);
pci_prepare_to_sleep(dev);
return 0;
}
static int ssb_pcihost_resume(struct device *d)
{
struct pci_dev *dev = to_pci_dev(d);
struct ssb_bus *ssb = pci_get_drvdata(dev);
int err;
pci_back_from_sleep(dev);
err = pci_enable_device(dev);
if (err)
return err;
pci_restore_state(dev);
err = ssb_bus_resume(ssb);
if (err)
return err;
return 0;
}
static const struct dev_pm_ops ssb_pcihost_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(ssb_pcihost_suspend, ssb_pcihost_resume)
};
#endif /* CONFIG_PM_SLEEP */
static int ssb_pcihost_probe(struct pci_dev *dev,
const struct pci_device_id *id)
{
struct ssb_bus *ssb;
int err = -ENOMEM;
const char *name;
u32 val;
ssb = kzalloc(sizeof(*ssb), GFP_KERNEL);
if (!ssb)
goto out;
err = pci_enable_device(dev);
if (err)
goto err_kfree_ssb;
name = dev_name(&dev->dev);
if (dev->driver && dev->driver->name)
name = dev->driver->name;
err = pci_request_regions(dev, name);
if (err)
goto err_pci_disable;
pci_set_master(dev);
/* Disable the RETRY_TIMEOUT register (0x41) to keep
* PCI Tx retries from interfering with C3 CPU state */
pci_read_config_dword(dev, 0x40, &val);
if ((val & 0x0000ff00) != 0)
pci_write_config_dword(dev, 0x40, val & 0xffff00ff);
err = ssb_bus_pcibus_register(ssb, dev);
if (err)
goto err_pci_release_regions;
pci_set_drvdata(dev, ssb);
out:
return err;
err_pci_release_regions:
pci_release_regions(dev);
err_pci_disable:
pci_disable_device(dev);
err_kfree_ssb:
kfree(ssb);
return err;
}
static void ssb_pcihost_remove(struct pci_dev *dev)
{
struct ssb_bus *ssb = pci_get_drvdata(dev);
ssb_bus_unregister(ssb);
pci_release_regions(dev);
pci_disable_device(dev);
kfree(ssb);
pci_set_drvdata(dev, NULL);
}
int ssb_pcihost_register(struct pci_driver *driver)
{
driver->probe = ssb_pcihost_probe;
driver->remove = ssb_pcihost_remove;
#ifdef CONFIG_PM_SLEEP
driver->driver.pm = &ssb_pcihost_pm_ops;
#endif
return pci_register_driver(driver);
}
EXPORT_SYMBOL(ssb_pcihost_register);