Javier Martinez Canillas b1450ae9b6 iio: light: opt3001: Export OF device ID table as module aliases ... The I2C core always reports a MODALIAS of the form i2c:<foo> even if the device was registered via OF, this means that exporting the OF device ID table device aliases in the module is not needed. But in order to change how the core reports modaliases to user-space, it's better to export it. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>		2017-01-22 13:21:29 +00:00
..
accel	iio:kfifo_buf header include push down.	2017-01-10 19:54:53 +00:00
adc	iio: adc: tlc4541: add support for TI tlc4541 adc	2017-01-22 13:21:28 +00:00
amplifiers	spi: Updates for v4.4	2015-11-05 13:15:12 -08:00
buffer	iio:buffer.h - split into buffer.h and buffer_impl.h	2017-01-10 19:54:55 +00:00
chemical	iio:chemical:atlas-ph-sensor: Fix use of 32 bit int to hold 16 bit big endian value	2016-10-23 22:18:27 +01:00
common	iio:kfifo_buf header include push down.	2017-01-10 19:54:53 +00:00
counter	iio: 104-quad-8: Add IIO support for the ACCES 104-QUAD-8	2016-10-01 17:06:21 +01:00
dac	iio: dac: ad5593r: Add ACPI support	2016-12-30 17:20:14 +00:00
dummy	iio:dummy: Stop enabling timestamp by default.	2017-01-10 19:54:55 +00:00
frequency	iio: frequency: ad9523: use unsigned int rather then bare unsigned	2016-04-17 10:31:03 +01:00
gyro	iio:kfifo_buf header include push down.	2017-01-10 19:54:53 +00:00
health	iio: health: max30100: use msleep() for long uncritical delays	2017-01-22 13:21:28 +00:00
humidity	iio: humidity: Support acpi probe for hts211	2016-12-03 08:56:28 +00:00
imu	iio: bmi160: use variable names for sizeof() operator	2017-01-21 13:06:03 +00:00
light	iio: light: opt3001: Export OF device ID table as module aliases	2017-01-22 13:21:29 +00:00
magnetometer	iio: magnetometer: mag3110: claim direct mode during raw writes	2017-01-21 12:20:40 +00:00
orientation	iio: orientation: hid-sensor-rotation: Add PM function (fix non working driver)	2016-11-05 17:47:47 +00:00
potentiometer	iio: mcp4531: provide range of available raw values	2016-11-13 11:40:26 +00:00
potentiostat	iio: potentiostat: add LMP91000 support	2016-09-27 20:33:03 +01:00
pressure	iio: pressure: ms5611: claim direct mode during oversampling changes	2017-01-21 12:31:05 +00:00
proximity	iio: proximity: sx9500: claim direct mode during raw proximity reads	2017-01-21 12:21:53 +00:00
temperature	iio:temperature: Add support for TI TMP007 sensor	2017-01-14 10:45:05 +00:00
trigger	iio:trigger: Experimental kthread tight loop trigger (thread only)	2016-06-03 13:18:44 +01:00
iio_core_trigger.h
iio_core.h	iio:core: timestamping clock selection support	2016-06-30 19:41:38 +01:00
industrialio-buffer.c	iio:buffer.h - split into buffer.h and buffer_impl.h	2017-01-10 19:54:55 +00:00
industrialio-configfs.c	iio:configfs: Introduce iio/configfs.h to provide a location for the configfs_subsystem	2015-12-05 16:25:30 +00:00
industrialio-core.c	iio:buffer.h - split into buffer.h and buffer_impl.h	2017-01-10 19:54:55 +00:00
industrialio-event.c	iio: iio_push_event(): Don't crash if the event interface is not registered	2016-09-10 16:40:44 +01:00
industrialio-sw-device.c	iio: Add support for creating IIO devices via configfs	2016-05-04 11:43:54 +01:00
industrialio-sw-trigger.c	iio: core: fix ptr_ret.cocci warnings	2016-01-20 17:09:18 -08:00
industrialio-trigger.c	iio:trigger: Add helper function to verify that a trigger belongs to the same device	2016-09-27 20:32:55 +01:00
industrialio-triggered-event.c	iio: Support triggered events	2015-08-27 20:47:09 +01:00
inkern.c	iio: inkern: pass through raw values if no scaling	2017-01-14 12:20:18 +00:00
Kconfig	iio: 104-quad-8: Add IIO support for the ACCES 104-QUAD-8	2016-10-01 17:06:21 +01:00
Makefile	iio: 104-quad-8: Add IIO support for the ACCES 104-QUAD-8	2016-10-01 17:06:21 +01:00