linux/arch/arm/mach-prima2/rstc.c
Arnd Bergmann 48352e5286 ARM: prima2: build reset code standalone
The prima2 platform code currently depends on the rstc
implementation and that in turn depends on the reset
controller framework. This removes the platform dependency
by letting the driver access arm_pm_restart directly
to turn the driver into a standalone entity, and also
removes the dependency on the reset controller framework
by using "if (IS_ENABLED(CONFIG_RESET_CONTROLLER))". This
will cause all code that is used for the reset controller
to be dropped by the compiler if the framework is disabled.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-03-17 19:46:12 +01:00

121 lines
3.1 KiB
C

/*
* reset controller for CSR SiRFprimaII
*
* Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
*
* Licensed under GPLv2 or later.
*/
#include <linux/kernel.h>
#include <linux/mutex.h>
#include <linux/io.h>
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/platform_device.h>
#include <linux/reboot.h>
#include <linux/reset-controller.h>
#include <asm/system_misc.h>
#define SIRFSOC_RSTBIT_NUM 64
static void __iomem *sirfsoc_rstc_base;
static DEFINE_MUTEX(rstc_lock);
static int sirfsoc_reset_module(struct reset_controller_dev *rcdev,
unsigned long sw_reset_idx)
{
u32 reset_bit = sw_reset_idx;
if (reset_bit >= SIRFSOC_RSTBIT_NUM)
return -EINVAL;
mutex_lock(&rstc_lock);
if (of_device_is_compatible(rcdev->of_node, "sirf,prima2-rstc")) {
/*
* Writing 1 to this bit resets corresponding block. Writing 0 to this
* bit de-asserts reset signal of the corresponding block.
* datasheet doesn't require explicit delay between the set and clear
* of reset bit. it could be shorter if tests pass.
*/
writel(readl(sirfsoc_rstc_base + (reset_bit / 32) * 4) | (1 << reset_bit),
sirfsoc_rstc_base + (reset_bit / 32) * 4);
msleep(10);
writel(readl(sirfsoc_rstc_base + (reset_bit / 32) * 4) & ~(1 << reset_bit),
sirfsoc_rstc_base + (reset_bit / 32) * 4);
} else {
/*
* For MARCO and POLO
* Writing 1 to SET register resets corresponding block. Writing 1 to CLEAR
* register de-asserts reset signal of the corresponding block.
* datasheet doesn't require explicit delay between the set and clear
* of reset bit. it could be shorter if tests pass.
*/
writel(1 << reset_bit, sirfsoc_rstc_base + (reset_bit / 32) * 8);
msleep(10);
writel(1 << reset_bit, sirfsoc_rstc_base + (reset_bit / 32) * 8 + 4);
}
mutex_unlock(&rstc_lock);
return 0;
}
static struct reset_control_ops sirfsoc_rstc_ops = {
.reset = sirfsoc_reset_module,
};
static struct reset_controller_dev sirfsoc_reset_controller = {
.ops = &sirfsoc_rstc_ops,
.nr_resets = SIRFSOC_RSTBIT_NUM,
};
#define SIRFSOC_SYS_RST_BIT BIT(31)
static void sirfsoc_restart(enum reboot_mode mode, const char *cmd)
{
writel(SIRFSOC_SYS_RST_BIT, sirfsoc_rstc_base);
}
static int sirfsoc_rstc_probe(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
sirfsoc_rstc_base = of_iomap(np, 0);
if (!sirfsoc_rstc_base) {
dev_err(&pdev->dev, "unable to map rstc cpu registers\n");
return -ENOMEM;
}
sirfsoc_reset_controller.of_node = np;
arm_pm_restart = sirfsoc_restart;
if (IS_ENABLED(CONFIG_RESET_CONTROLLER))
reset_controller_register(&sirfsoc_reset_controller);
return 0;
}
static const struct of_device_id rstc_ids[] = {
{ .compatible = "sirf,prima2-rstc" },
{ .compatible = "sirf,marco-rstc" },
{},
};
static struct platform_driver sirfsoc_rstc_driver = {
.probe = sirfsoc_rstc_probe,
.driver = {
.name = "sirfsoc_rstc",
.owner = THIS_MODULE,
.of_match_table = rstc_ids,
},
};
static int __init sirfsoc_rstc_init(void)
{
return platform_driver_register(&sirfsoc_rstc_driver);
}
subsys_initcall(sirfsoc_rstc_init);