mirror of
https://github.com/torvalds/linux.git
synced 2024-12-27 13:22:23 +00:00
b0e6867411
On current ST platforms the LPC controls a number of functions including Watchdog and Real Time Clock. This patch provides the bindings used to configure LPC in Watchdog mode. Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Lee Jones <lee.jones@linaro.org>
39 lines
1.2 KiB
Plaintext
39 lines
1.2 KiB
Plaintext
STMicroelectronics Low Power Controller (LPC) - Watchdog
|
|
========================================================
|
|
|
|
LPC currently supports Watchdog OR Real Time Clock functionality.
|
|
|
|
[See: ../rtc/rtc-st-lpc.txt for RTC options]
|
|
|
|
Required properties
|
|
|
|
- compatible : Must be one of: "st,stih407-lpc" "st,stih416-lpc"
|
|
"st,stih415-lpc" "st,stid127-lpc"
|
|
- reg : LPC registers base address + size
|
|
- interrupts : LPC interrupt line number and associated flags
|
|
- clocks : Clock used by LPC device (See: ../clock/clock-bindings.txt)
|
|
- st,lpc-mode : The LPC can run either one of two modes ST_LPC_MODE_RTC [0] or
|
|
ST_LPC_MODE_WDT [1]. One (and only one) mode must be
|
|
selected.
|
|
|
|
Required properties [watchdog mode]
|
|
|
|
- st,syscfg : Phandle to syscfg node used to enable watchdog and configure
|
|
CPU reset type.
|
|
- timeout-sec : Watchdog timeout in seconds
|
|
|
|
Optional properties [watchdog mode]
|
|
|
|
- st,warm-reset : If present reset type will be 'warm' - if not it will be cold
|
|
|
|
Example:
|
|
lpc@fde05000 {
|
|
compatible = "st,stih407-lpc";
|
|
reg = <0xfde05000 0x1000>;
|
|
clocks = <&clk_s_d3_flexgen CLK_LPC_0>;
|
|
st,syscfg = <&syscfg_core>;
|
|
timeout-sec = <120>;
|
|
st,lpc-mode = <ST_LPC_MODE_WDT>;
|
|
st,warm-reset;
|
|
};
|