mirror of
https://github.com/torvalds/linux.git
synced 2024-12-26 12:52:30 +00:00
376349232a
ARC AXS10x boards support custom IP-block which allows to control reset signals of selected peripherals. For example DW GMAC, etc... This block is controlled via memory-mapped register (AKA CREG) which represents up-to 32 reset lines. This regiter is self-clearing so we don't need to deassert line after reset. As of today only the following lines are used: - DW GMAC - line 5 Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
34 lines
922 B
Plaintext
34 lines
922 B
Plaintext
Binding for the AXS10x reset controller
|
|
|
|
This binding describes the ARC AXS10x boards custom IP-block which allows
|
|
to control reset signals of selected peripherals. For example DW GMAC, etc...
|
|
This block is controlled via memory-mapped register (AKA CREG) which
|
|
represents up-to 32 reset lines.
|
|
|
|
As of today only the following lines are used:
|
|
- DW GMAC - line 5
|
|
|
|
This binding uses the common reset binding[1].
|
|
|
|
[1] Documentation/devicetree/bindings/reset/reset.txt
|
|
|
|
Required properties:
|
|
- compatible: should be "snps,axs10x-reset".
|
|
- reg: should always contain pair address - length: for creg reset
|
|
bits register.
|
|
- #reset-cells: from common reset binding; Should always be set to 1.
|
|
|
|
Example:
|
|
reset: reset-controller@11220 {
|
|
compatible = "snps,axs10x-reset";
|
|
#reset-cells = <1>;
|
|
reg = <0x11220 0x4>;
|
|
};
|
|
|
|
Specifying reset lines connected to IP modules:
|
|
ethernet@.... {
|
|
....
|
|
resets = <&reset 5>;
|
|
....
|
|
};
|