mirror of
https://github.com/torvalds/linux.git
synced 2024-12-27 05:11:48 +00:00
955e007729
Add device tree bindings for the FXAS21002C gyroscope. Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
32 lines
1.3 KiB
Plaintext
32 lines
1.3 KiB
Plaintext
* NXP FXAS21002C Gyroscope device tree bindings
|
|
|
|
http://www.nxp.com/products/sensors/gyroscopes/3-axis-digital-gyroscope:FXAS21002C
|
|
|
|
Required properties:
|
|
- compatible : should be "nxp,fxas21002c"
|
|
- reg : the I2C address of the sensor or SPI chip select number for the
|
|
device.
|
|
- vdd-supply: phandle to the regulator that provides power to the sensor.
|
|
- vddio-supply: phandle to the regulator that provides power to the bus.
|
|
|
|
Optional properties:
|
|
- reset-gpios : gpio used to reset the device, see gpio/gpio.txt
|
|
- interrupts : device support 2 interrupts, INT1 and INT2,
|
|
the interrupts can be triggered on rising or falling edges.
|
|
See interrupt-controller/interrupts.txt
|
|
- interrupt-names: should contain "INT1" or "INT2", the gyroscope interrupt
|
|
line in use.
|
|
- drive-open-drain: the interrupt/data ready line will be configured
|
|
as open drain, which is useful if several sensors share
|
|
the same interrupt line. This is a boolean property.
|
|
(This binding is taken from pinctrl/pinctrl-bindings.txt)
|
|
|
|
Example:
|
|
|
|
gyroscope@20 {
|
|
compatible = "nxp,fxas21002c";
|
|
reg = <0x20>;
|
|
vdd-supply = <®_peri_3p15v>;
|
|
vddio-supply = <®_peri_3p15v>;
|
|
};
|