mirror of
https://github.com/torvalds/linux.git
synced 2024-12-27 05:11:48 +00:00
e2fad74503
Add support for DFSDM (Digital Filter For Sigma Delta Modulators) to STM32MP1. This variant is close to STM32H7 DFSDM, it implements 6 filter instances. Registers map is also increased. Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
136 lines
4.8 KiB
Plaintext
136 lines
4.8 KiB
Plaintext
STMicroelectronics STM32 DFSDM ADC device driver
|
|
|
|
|
|
STM32 DFSDM ADC is a sigma delta analog-to-digital converter dedicated to
|
|
interface external sigma delta modulators to STM32 micro controllers.
|
|
It is mainly targeted for:
|
|
- Sigma delta modulators (motor control, metering...)
|
|
- PDM microphones (audio digital microphone)
|
|
|
|
It features up to 8 serial digital interfaces (SPI or Manchester) and
|
|
up to 4 filters on stm32h7 or 6 filters on stm32mp1.
|
|
|
|
Each child node match with a filter instance.
|
|
|
|
Contents of a STM32 DFSDM root node:
|
|
------------------------------------
|
|
Required properties:
|
|
- compatible: Should be one of:
|
|
"st,stm32h7-dfsdm"
|
|
"st,stm32mp1-dfsdm"
|
|
- reg: Offset and length of the DFSDM block register set.
|
|
- clocks: IP and serial interfaces clocking. Should be set according
|
|
to rcc clock ID and "clock-names".
|
|
- clock-names: Input clock name "dfsdm" must be defined,
|
|
"audio" is optional. If defined CLKOUT is based on the audio
|
|
clock, else "dfsdm" is used.
|
|
- #interrupt-cells = <1>;
|
|
- #address-cells = <1>;
|
|
- #size-cells = <0>;
|
|
|
|
Optional properties:
|
|
- spi-max-frequency: Requested only for SPI master mode.
|
|
SPI clock OUT frequency (Hz). This clock must be set according
|
|
to "clock" property. Frequency must be a multiple of the rcc
|
|
clock frequency. If not, SPI CLKOUT frequency will not be
|
|
accurate.
|
|
- pinctrl-names: Set to "default".
|
|
- pinctrl-0: List of phandles pointing to pin configuration
|
|
nodes to set pins in mode of operation for dfsdm
|
|
on external pin.
|
|
|
|
Contents of a STM32 DFSDM child nodes:
|
|
--------------------------------------
|
|
|
|
Required properties:
|
|
- compatible: Must be:
|
|
"st,stm32-dfsdm-adc" for sigma delta ADCs
|
|
"st,stm32-dfsdm-dmic" for audio digital microphone.
|
|
- reg: Specifies the DFSDM filter instance used.
|
|
Valid values are from 0 to 3 on stm32h7, 0 to 5 on stm32mp1.
|
|
- interrupts: IRQ lines connected to each DFSDM filter instance.
|
|
- st,adc-channels: List of single-ended channels muxed for this ADC.
|
|
valid values:
|
|
"st,stm32h7-dfsdm" compatibility: 0 to 7.
|
|
- st,adc-channel-names: List of single-ended channel names.
|
|
- st,filter-order: SinC filter order from 0 to 5.
|
|
0: FastSinC
|
|
[1-5]: order 1 to 5.
|
|
For audio purpose it is recommended to use order 3 to 5.
|
|
- #io-channel-cells = <1>: See the IIO bindings section "IIO consumers".
|
|
|
|
Required properties for "st,stm32-dfsdm-adc" compatibility:
|
|
- io-channels: From common IIO binding. Used to pipe external sigma delta
|
|
modulator or internal ADC output to DFSDM channel.
|
|
This is not required for "st,stm32-dfsdm-pdm" compatibility as
|
|
PDM microphone is binded in Audio DT node.
|
|
|
|
Required properties for "st,stm32-dfsdm-pdm" compatibility:
|
|
- #sound-dai-cells: Must be set to 0.
|
|
- dma: DMA controller phandle and DMA request line associated to the
|
|
filter instance (specified by the field "reg")
|
|
- dma-names: Must be "rx"
|
|
|
|
Optional properties:
|
|
- st,adc-channel-types: Single-ended channel input type.
|
|
- "SPI_R": SPI with data on rising edge (default)
|
|
- "SPI_F": SPI with data on falling edge
|
|
- "MANCH_R": manchester codec, rising edge = logic 0, falling edge = logic 1
|
|
- "MANCH_F": manchester codec, rising edge = logic 1, falling edge = logic 0
|
|
- st,adc-channel-clk-src: Conversion clock source.
|
|
- "CLKIN": external SPI clock (CLKIN x)
|
|
- "CLKOUT": internal SPI clock (CLKOUT) (default)
|
|
- "CLKOUT_F": internal SPI clock divided by 2 (falling edge).
|
|
- "CLKOUT_R": internal SPI clock divided by 2 (rising edge).
|
|
|
|
- st,adc-alt-channel: Must be defined if two sigma delta modulator are
|
|
connected on same SPI input.
|
|
If not set, channel n is connected to SPI input n.
|
|
If set, channel n is connected to SPI input n + 1.
|
|
|
|
- st,filter0-sync: Set to 1 to synchronize with DFSDM filter instance 0.
|
|
Used for multi microphones synchronization.
|
|
|
|
Example of a sigma delta adc connected on DFSDM SPI port 0
|
|
and a pdm microphone connected on DFSDM SPI port 1:
|
|
|
|
ads1202: simple_sd_adc@0 {
|
|
compatible = "ads1202";
|
|
#io-channel-cells = <1>;
|
|
};
|
|
|
|
dfsdm: dfsdm@40017000 {
|
|
compatible = "st,stm32h7-dfsdm";
|
|
reg = <0x40017000 0x400>;
|
|
clocks = <&rcc DFSDM1_CK>;
|
|
clock-names = "dfsdm";
|
|
#interrupt-cells = <1>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
dfsdm_adc0: filter@0 {
|
|
compatible = "st,stm32-dfsdm-adc";
|
|
#io-channel-cells = <1>;
|
|
reg = <0>;
|
|
interrupts = <110>;
|
|
st,adc-channels = <0>;
|
|
st,adc-channel-names = "sd_adc0";
|
|
st,adc-channel-types = "SPI_F";
|
|
st,adc-channel-clk-src = "CLKOUT";
|
|
io-channels = <&ads1202 0>;
|
|
st,filter-order = <3>;
|
|
};
|
|
dfsdm_pdm1: filter@1 {
|
|
compatible = "st,stm32-dfsdm-dmic";
|
|
reg = <1>;
|
|
interrupts = <111>;
|
|
dmas = <&dmamux1 102 0x400 0x00>;
|
|
dma-names = "rx";
|
|
st,adc-channels = <1>;
|
|
st,adc-channel-names = "dmic1";
|
|
st,adc-channel-types = "SPI_R";
|
|
st,adc-channel-clk-src = "CLKOUT";
|
|
st,filter-order = <5>;
|
|
};
|
|
}
|