mirror of
https://github.com/torvalds/linux.git
synced 2024-12-05 18:41:23 +00:00
022658beab
Currently ASoC can only add kcontrols using codec and platform component device handles. It's also desirable to add kcontrols for DAIs (i.e. McBSP) and for SoC card machine drivers too. This allows the kcontrol to have a direct handle to the parent ASoC component DAI/SoC Card/Platform/Codec device and hence easily get it's private data. This change makes snd_soc_add_controls() static and wraps it in the folowing calls (card and dai are new) :- snd_soc_add_card_controls() snd_soc_add_codec_controls() snd_soc_add_dai_controls() snd_soc_add_platform_controls() This patch also does a lot of small mechanical changes in individual codec drivers to replace snd_soc_add_controls() with snd_soc_add_codec_controls(). It also updates the McBSP DAI driver to use snd_soc_add_dai_controls(). Finally, it updates the existing machine drivers that register controls to either :- 1) Use snd_soc_add_card_controls() where no direct codec control is required. 2) Use snd_soc_add_codec_controls() where there is direct codec control. In the case of 1) above we also update the machine drivers to get the correct component data pointers from the kcontrol (rather than getting the machine pointer via the codec pointer). Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
1136 lines
30 KiB
C
1136 lines
30 KiB
C
/*
|
|
* wm8961.c -- WM8961 ALSA SoC Audio driver
|
|
*
|
|
* Author: Mark Brown
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* Currently unimplemented features:
|
|
* - ALC
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/moduleparam.h>
|
|
#include <linux/init.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/pm.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/slab.h>
|
|
#include <sound/core.h>
|
|
#include <sound/pcm.h>
|
|
#include <sound/pcm_params.h>
|
|
#include <sound/soc.h>
|
|
#include <sound/initval.h>
|
|
#include <sound/tlv.h>
|
|
|
|
#include "wm8961.h"
|
|
|
|
#define WM8961_MAX_REGISTER 0xFC
|
|
|
|
static u16 wm8961_reg_defaults[] = {
|
|
0x009F, /* R0 - Left Input volume */
|
|
0x009F, /* R1 - Right Input volume */
|
|
0x0000, /* R2 - LOUT1 volume */
|
|
0x0000, /* R3 - ROUT1 volume */
|
|
0x0020, /* R4 - Clocking1 */
|
|
0x0008, /* R5 - ADC & DAC Control 1 */
|
|
0x0000, /* R6 - ADC & DAC Control 2 */
|
|
0x000A, /* R7 - Audio Interface 0 */
|
|
0x01F4, /* R8 - Clocking2 */
|
|
0x0000, /* R9 - Audio Interface 1 */
|
|
0x00FF, /* R10 - Left DAC volume */
|
|
0x00FF, /* R11 - Right DAC volume */
|
|
0x0000, /* R12 */
|
|
0x0000, /* R13 */
|
|
0x0040, /* R14 - Audio Interface 2 */
|
|
0x0000, /* R15 - Software Reset */
|
|
0x0000, /* R16 */
|
|
0x007B, /* R17 - ALC1 */
|
|
0x0000, /* R18 - ALC2 */
|
|
0x0032, /* R19 - ALC3 */
|
|
0x0000, /* R20 - Noise Gate */
|
|
0x00C0, /* R21 - Left ADC volume */
|
|
0x00C0, /* R22 - Right ADC volume */
|
|
0x0120, /* R23 - Additional control(1) */
|
|
0x0000, /* R24 - Additional control(2) */
|
|
0x0000, /* R25 - Pwr Mgmt (1) */
|
|
0x0000, /* R26 - Pwr Mgmt (2) */
|
|
0x0000, /* R27 - Additional Control (3) */
|
|
0x0000, /* R28 - Anti-pop */
|
|
0x0000, /* R29 */
|
|
0x005F, /* R30 - Clocking 3 */
|
|
0x0000, /* R31 */
|
|
0x0000, /* R32 - ADCL signal path */
|
|
0x0000, /* R33 - ADCR signal path */
|
|
0x0000, /* R34 */
|
|
0x0000, /* R35 */
|
|
0x0000, /* R36 */
|
|
0x0000, /* R37 */
|
|
0x0000, /* R38 */
|
|
0x0000, /* R39 */
|
|
0x0000, /* R40 - LOUT2 volume */
|
|
0x0000, /* R41 - ROUT2 volume */
|
|
0x0000, /* R42 */
|
|
0x0000, /* R43 */
|
|
0x0000, /* R44 */
|
|
0x0000, /* R45 */
|
|
0x0000, /* R46 */
|
|
0x0000, /* R47 - Pwr Mgmt (3) */
|
|
0x0023, /* R48 - Additional Control (4) */
|
|
0x0000, /* R49 - Class D Control 1 */
|
|
0x0000, /* R50 */
|
|
0x0003, /* R51 - Class D Control 2 */
|
|
0x0000, /* R52 */
|
|
0x0000, /* R53 */
|
|
0x0000, /* R54 */
|
|
0x0000, /* R55 */
|
|
0x0106, /* R56 - Clocking 4 */
|
|
0x0000, /* R57 - DSP Sidetone 0 */
|
|
0x0000, /* R58 - DSP Sidetone 1 */
|
|
0x0000, /* R59 */
|
|
0x0000, /* R60 - DC Servo 0 */
|
|
0x0000, /* R61 - DC Servo 1 */
|
|
0x0000, /* R62 */
|
|
0x015E, /* R63 - DC Servo 3 */
|
|
0x0010, /* R64 */
|
|
0x0010, /* R65 - DC Servo 5 */
|
|
0x0000, /* R66 */
|
|
0x0001, /* R67 */
|
|
0x0003, /* R68 - Analogue PGA Bias */
|
|
0x0000, /* R69 - Analogue HP 0 */
|
|
0x0060, /* R70 */
|
|
0x01FB, /* R71 - Analogue HP 2 */
|
|
0x0000, /* R72 - Charge Pump 1 */
|
|
0x0065, /* R73 */
|
|
0x005F, /* R74 */
|
|
0x0059, /* R75 */
|
|
0x006B, /* R76 */
|
|
0x0038, /* R77 */
|
|
0x000C, /* R78 */
|
|
0x000A, /* R79 */
|
|
0x006B, /* R80 */
|
|
0x0000, /* R81 */
|
|
0x0000, /* R82 - Charge Pump B */
|
|
0x0087, /* R83 */
|
|
0x0000, /* R84 */
|
|
0x005C, /* R85 */
|
|
0x0000, /* R86 */
|
|
0x0000, /* R87 - Write Sequencer 1 */
|
|
0x0000, /* R88 - Write Sequencer 2 */
|
|
0x0000, /* R89 - Write Sequencer 3 */
|
|
0x0000, /* R90 - Write Sequencer 4 */
|
|
0x0000, /* R91 - Write Sequencer 5 */
|
|
0x0000, /* R92 - Write Sequencer 6 */
|
|
0x0000, /* R93 - Write Sequencer 7 */
|
|
0x0000, /* R94 */
|
|
0x0000, /* R95 */
|
|
0x0000, /* R96 */
|
|
0x0000, /* R97 */
|
|
0x0000, /* R98 */
|
|
0x0000, /* R99 */
|
|
0x0000, /* R100 */
|
|
0x0000, /* R101 */
|
|
0x0000, /* R102 */
|
|
0x0000, /* R103 */
|
|
0x0000, /* R104 */
|
|
0x0000, /* R105 */
|
|
0x0000, /* R106 */
|
|
0x0000, /* R107 */
|
|
0x0000, /* R108 */
|
|
0x0000, /* R109 */
|
|
0x0000, /* R110 */
|
|
0x0000, /* R111 */
|
|
0x0000, /* R112 */
|
|
0x0000, /* R113 */
|
|
0x0000, /* R114 */
|
|
0x0000, /* R115 */
|
|
0x0000, /* R116 */
|
|
0x0000, /* R117 */
|
|
0x0000, /* R118 */
|
|
0x0000, /* R119 */
|
|
0x0000, /* R120 */
|
|
0x0000, /* R121 */
|
|
0x0000, /* R122 */
|
|
0x0000, /* R123 */
|
|
0x0000, /* R124 */
|
|
0x0000, /* R125 */
|
|
0x0000, /* R126 */
|
|
0x0000, /* R127 */
|
|
0x0000, /* R128 */
|
|
0x0000, /* R129 */
|
|
0x0000, /* R130 */
|
|
0x0000, /* R131 */
|
|
0x0000, /* R132 */
|
|
0x0000, /* R133 */
|
|
0x0000, /* R134 */
|
|
0x0000, /* R135 */
|
|
0x0000, /* R136 */
|
|
0x0000, /* R137 */
|
|
0x0000, /* R138 */
|
|
0x0000, /* R139 */
|
|
0x0000, /* R140 */
|
|
0x0000, /* R141 */
|
|
0x0000, /* R142 */
|
|
0x0000, /* R143 */
|
|
0x0000, /* R144 */
|
|
0x0000, /* R145 */
|
|
0x0000, /* R146 */
|
|
0x0000, /* R147 */
|
|
0x0000, /* R148 */
|
|
0x0000, /* R149 */
|
|
0x0000, /* R150 */
|
|
0x0000, /* R151 */
|
|
0x0000, /* R152 */
|
|
0x0000, /* R153 */
|
|
0x0000, /* R154 */
|
|
0x0000, /* R155 */
|
|
0x0000, /* R156 */
|
|
0x0000, /* R157 */
|
|
0x0000, /* R158 */
|
|
0x0000, /* R159 */
|
|
0x0000, /* R160 */
|
|
0x0000, /* R161 */
|
|
0x0000, /* R162 */
|
|
0x0000, /* R163 */
|
|
0x0000, /* R164 */
|
|
0x0000, /* R165 */
|
|
0x0000, /* R166 */
|
|
0x0000, /* R167 */
|
|
0x0000, /* R168 */
|
|
0x0000, /* R169 */
|
|
0x0000, /* R170 */
|
|
0x0000, /* R171 */
|
|
0x0000, /* R172 */
|
|
0x0000, /* R173 */
|
|
0x0000, /* R174 */
|
|
0x0000, /* R175 */
|
|
0x0000, /* R176 */
|
|
0x0000, /* R177 */
|
|
0x0000, /* R178 */
|
|
0x0000, /* R179 */
|
|
0x0000, /* R180 */
|
|
0x0000, /* R181 */
|
|
0x0000, /* R182 */
|
|
0x0000, /* R183 */
|
|
0x0000, /* R184 */
|
|
0x0000, /* R185 */
|
|
0x0000, /* R186 */
|
|
0x0000, /* R187 */
|
|
0x0000, /* R188 */
|
|
0x0000, /* R189 */
|
|
0x0000, /* R190 */
|
|
0x0000, /* R191 */
|
|
0x0000, /* R192 */
|
|
0x0000, /* R193 */
|
|
0x0000, /* R194 */
|
|
0x0000, /* R195 */
|
|
0x0030, /* R196 */
|
|
0x0006, /* R197 */
|
|
0x0000, /* R198 */
|
|
0x0060, /* R199 */
|
|
0x0000, /* R200 */
|
|
0x003F, /* R201 */
|
|
0x0000, /* R202 */
|
|
0x0000, /* R203 */
|
|
0x0000, /* R204 */
|
|
0x0001, /* R205 */
|
|
0x0000, /* R206 */
|
|
0x0181, /* R207 */
|
|
0x0005, /* R208 */
|
|
0x0008, /* R209 */
|
|
0x0008, /* R210 */
|
|
0x0000, /* R211 */
|
|
0x013B, /* R212 */
|
|
0x0000, /* R213 */
|
|
0x0000, /* R214 */
|
|
0x0000, /* R215 */
|
|
0x0000, /* R216 */
|
|
0x0070, /* R217 */
|
|
0x0000, /* R218 */
|
|
0x0000, /* R219 */
|
|
0x0000, /* R220 */
|
|
0x0000, /* R221 */
|
|
0x0000, /* R222 */
|
|
0x0003, /* R223 */
|
|
0x0000, /* R224 */
|
|
0x0000, /* R225 */
|
|
0x0001, /* R226 */
|
|
0x0008, /* R227 */
|
|
0x0000, /* R228 */
|
|
0x0000, /* R229 */
|
|
0x0000, /* R230 */
|
|
0x0000, /* R231 */
|
|
0x0004, /* R232 */
|
|
0x0000, /* R233 */
|
|
0x0000, /* R234 */
|
|
0x0000, /* R235 */
|
|
0x0000, /* R236 */
|
|
0x0000, /* R237 */
|
|
0x0080, /* R238 */
|
|
0x0000, /* R239 */
|
|
0x0000, /* R240 */
|
|
0x0000, /* R241 */
|
|
0x0000, /* R242 */
|
|
0x0000, /* R243 */
|
|
0x0000, /* R244 */
|
|
0x0052, /* R245 */
|
|
0x0110, /* R246 */
|
|
0x0040, /* R247 */
|
|
0x0000, /* R248 */
|
|
0x0030, /* R249 */
|
|
0x0000, /* R250 */
|
|
0x0000, /* R251 */
|
|
0x0001, /* R252 - General test 1 */
|
|
};
|
|
|
|
struct wm8961_priv {
|
|
enum snd_soc_control_type control_type;
|
|
int sysclk;
|
|
};
|
|
|
|
static int wm8961_volatile_register(struct snd_soc_codec *codec, unsigned int reg)
|
|
{
|
|
switch (reg) {
|
|
case WM8961_SOFTWARE_RESET:
|
|
case WM8961_WRITE_SEQUENCER_7:
|
|
case WM8961_DC_SERVO_1:
|
|
return 1;
|
|
|
|
default:
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
static int wm8961_reset(struct snd_soc_codec *codec)
|
|
{
|
|
return snd_soc_write(codec, WM8961_SOFTWARE_RESET, 0);
|
|
}
|
|
|
|
/*
|
|
* The headphone output supports special anti-pop sequences giving
|
|
* silent power up and power down.
|
|
*/
|
|
static int wm8961_hp_event(struct snd_soc_dapm_widget *w,
|
|
struct snd_kcontrol *kcontrol, int event)
|
|
{
|
|
struct snd_soc_codec *codec = w->codec;
|
|
u16 hp_reg = snd_soc_read(codec, WM8961_ANALOGUE_HP_0);
|
|
u16 cp_reg = snd_soc_read(codec, WM8961_CHARGE_PUMP_1);
|
|
u16 pwr_reg = snd_soc_read(codec, WM8961_PWR_MGMT_2);
|
|
u16 dcs_reg = snd_soc_read(codec, WM8961_DC_SERVO_1);
|
|
int timeout = 500;
|
|
|
|
if (event & SND_SOC_DAPM_POST_PMU) {
|
|
/* Make sure the output is shorted */
|
|
hp_reg &= ~(WM8961_HPR_RMV_SHORT | WM8961_HPL_RMV_SHORT);
|
|
snd_soc_write(codec, WM8961_ANALOGUE_HP_0, hp_reg);
|
|
|
|
/* Enable the charge pump */
|
|
cp_reg |= WM8961_CP_ENA;
|
|
snd_soc_write(codec, WM8961_CHARGE_PUMP_1, cp_reg);
|
|
mdelay(5);
|
|
|
|
/* Enable the PGA */
|
|
pwr_reg |= WM8961_LOUT1_PGA | WM8961_ROUT1_PGA;
|
|
snd_soc_write(codec, WM8961_PWR_MGMT_2, pwr_reg);
|
|
|
|
/* Enable the amplifier */
|
|
hp_reg |= WM8961_HPR_ENA | WM8961_HPL_ENA;
|
|
snd_soc_write(codec, WM8961_ANALOGUE_HP_0, hp_reg);
|
|
|
|
/* Second stage enable */
|
|
hp_reg |= WM8961_HPR_ENA_DLY | WM8961_HPL_ENA_DLY;
|
|
snd_soc_write(codec, WM8961_ANALOGUE_HP_0, hp_reg);
|
|
|
|
/* Enable the DC servo & trigger startup */
|
|
dcs_reg |=
|
|
WM8961_DCS_ENA_CHAN_HPR | WM8961_DCS_TRIG_STARTUP_HPR |
|
|
WM8961_DCS_ENA_CHAN_HPL | WM8961_DCS_TRIG_STARTUP_HPL;
|
|
dev_dbg(codec->dev, "Enabling DC servo\n");
|
|
|
|
snd_soc_write(codec, WM8961_DC_SERVO_1, dcs_reg);
|
|
do {
|
|
msleep(1);
|
|
dcs_reg = snd_soc_read(codec, WM8961_DC_SERVO_1);
|
|
} while (--timeout &&
|
|
dcs_reg & (WM8961_DCS_TRIG_STARTUP_HPR |
|
|
WM8961_DCS_TRIG_STARTUP_HPL));
|
|
if (dcs_reg & (WM8961_DCS_TRIG_STARTUP_HPR |
|
|
WM8961_DCS_TRIG_STARTUP_HPL))
|
|
dev_err(codec->dev, "DC servo timed out\n");
|
|
else
|
|
dev_dbg(codec->dev, "DC servo startup complete\n");
|
|
|
|
/* Enable the output stage */
|
|
hp_reg |= WM8961_HPR_ENA_OUTP | WM8961_HPL_ENA_OUTP;
|
|
snd_soc_write(codec, WM8961_ANALOGUE_HP_0, hp_reg);
|
|
|
|
/* Remove the short on the output stage */
|
|
hp_reg |= WM8961_HPR_RMV_SHORT | WM8961_HPL_RMV_SHORT;
|
|
snd_soc_write(codec, WM8961_ANALOGUE_HP_0, hp_reg);
|
|
}
|
|
|
|
if (event & SND_SOC_DAPM_PRE_PMD) {
|
|
/* Short the output */
|
|
hp_reg &= ~(WM8961_HPR_RMV_SHORT | WM8961_HPL_RMV_SHORT);
|
|
snd_soc_write(codec, WM8961_ANALOGUE_HP_0, hp_reg);
|
|
|
|
/* Disable the output stage */
|
|
hp_reg &= ~(WM8961_HPR_ENA_OUTP | WM8961_HPL_ENA_OUTP);
|
|
snd_soc_write(codec, WM8961_ANALOGUE_HP_0, hp_reg);
|
|
|
|
/* Disable DC offset cancellation */
|
|
dcs_reg &= ~(WM8961_DCS_ENA_CHAN_HPR |
|
|
WM8961_DCS_ENA_CHAN_HPL);
|
|
snd_soc_write(codec, WM8961_DC_SERVO_1, dcs_reg);
|
|
|
|
/* Finish up */
|
|
hp_reg &= ~(WM8961_HPR_ENA_DLY | WM8961_HPR_ENA |
|
|
WM8961_HPL_ENA_DLY | WM8961_HPL_ENA);
|
|
snd_soc_write(codec, WM8961_ANALOGUE_HP_0, hp_reg);
|
|
|
|
/* Disable the PGA */
|
|
pwr_reg &= ~(WM8961_LOUT1_PGA | WM8961_ROUT1_PGA);
|
|
snd_soc_write(codec, WM8961_PWR_MGMT_2, pwr_reg);
|
|
|
|
/* Disable the charge pump */
|
|
dev_dbg(codec->dev, "Disabling charge pump\n");
|
|
snd_soc_write(codec, WM8961_CHARGE_PUMP_1,
|
|
cp_reg & ~WM8961_CP_ENA);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int wm8961_spk_event(struct snd_soc_dapm_widget *w,
|
|
struct snd_kcontrol *kcontrol, int event)
|
|
{
|
|
struct snd_soc_codec *codec = w->codec;
|
|
u16 pwr_reg = snd_soc_read(codec, WM8961_PWR_MGMT_2);
|
|
u16 spk_reg = snd_soc_read(codec, WM8961_CLASS_D_CONTROL_1);
|
|
|
|
if (event & SND_SOC_DAPM_POST_PMU) {
|
|
/* Enable the PGA */
|
|
pwr_reg |= WM8961_SPKL_PGA | WM8961_SPKR_PGA;
|
|
snd_soc_write(codec, WM8961_PWR_MGMT_2, pwr_reg);
|
|
|
|
/* Enable the amplifier */
|
|
spk_reg |= WM8961_SPKL_ENA | WM8961_SPKR_ENA;
|
|
snd_soc_write(codec, WM8961_CLASS_D_CONTROL_1, spk_reg);
|
|
}
|
|
|
|
if (event & SND_SOC_DAPM_PRE_PMD) {
|
|
/* Disable the amplifier */
|
|
spk_reg &= ~(WM8961_SPKL_ENA | WM8961_SPKR_ENA);
|
|
snd_soc_write(codec, WM8961_CLASS_D_CONTROL_1, spk_reg);
|
|
|
|
/* Disable the PGA */
|
|
pwr_reg &= ~(WM8961_SPKL_PGA | WM8961_SPKR_PGA);
|
|
snd_soc_write(codec, WM8961_PWR_MGMT_2, pwr_reg);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const char *adc_hpf_text[] = {
|
|
"Hi-fi", "Voice 1", "Voice 2", "Voice 3",
|
|
};
|
|
|
|
static const struct soc_enum adc_hpf =
|
|
SOC_ENUM_SINGLE(WM8961_ADC_DAC_CONTROL_2, 7, 4, adc_hpf_text);
|
|
|
|
static const char *dac_deemph_text[] = {
|
|
"None", "32kHz", "44.1kHz", "48kHz",
|
|
};
|
|
|
|
static const struct soc_enum dac_deemph =
|
|
SOC_ENUM_SINGLE(WM8961_ADC_DAC_CONTROL_1, 1, 4, dac_deemph_text);
|
|
|
|
static const DECLARE_TLV_DB_SCALE(out_tlv, -12100, 100, 1);
|
|
static const DECLARE_TLV_DB_SCALE(hp_sec_tlv, -700, 100, 0);
|
|
static const DECLARE_TLV_DB_SCALE(adc_tlv, -7200, 75, 1);
|
|
static const DECLARE_TLV_DB_SCALE(sidetone_tlv, -3600, 300, 0);
|
|
static unsigned int boost_tlv[] = {
|
|
TLV_DB_RANGE_HEAD(4),
|
|
0, 0, TLV_DB_SCALE_ITEM(0, 0, 0),
|
|
1, 1, TLV_DB_SCALE_ITEM(13, 0, 0),
|
|
2, 2, TLV_DB_SCALE_ITEM(20, 0, 0),
|
|
3, 3, TLV_DB_SCALE_ITEM(29, 0, 0),
|
|
};
|
|
static const DECLARE_TLV_DB_SCALE(pga_tlv, -2325, 75, 0);
|
|
|
|
static const struct snd_kcontrol_new wm8961_snd_controls[] = {
|
|
SOC_DOUBLE_R_TLV("Headphone Volume", WM8961_LOUT1_VOLUME, WM8961_ROUT1_VOLUME,
|
|
0, 127, 0, out_tlv),
|
|
SOC_DOUBLE_TLV("Headphone Secondary Volume", WM8961_ANALOGUE_HP_2,
|
|
6, 3, 7, 0, hp_sec_tlv),
|
|
SOC_DOUBLE_R("Headphone ZC Switch", WM8961_LOUT1_VOLUME, WM8961_ROUT1_VOLUME,
|
|
7, 1, 0),
|
|
|
|
SOC_DOUBLE_R_TLV("Speaker Volume", WM8961_LOUT2_VOLUME, WM8961_ROUT2_VOLUME,
|
|
0, 127, 0, out_tlv),
|
|
SOC_DOUBLE_R("Speaker ZC Switch", WM8961_LOUT2_VOLUME, WM8961_ROUT2_VOLUME,
|
|
7, 1, 0),
|
|
SOC_SINGLE("Speaker AC Gain", WM8961_CLASS_D_CONTROL_2, 0, 7, 0),
|
|
|
|
SOC_SINGLE("DAC x128 OSR Switch", WM8961_ADC_DAC_CONTROL_2, 0, 1, 0),
|
|
SOC_ENUM("DAC Deemphasis", dac_deemph),
|
|
SOC_SINGLE("DAC Soft Mute Switch", WM8961_ADC_DAC_CONTROL_2, 3, 1, 0),
|
|
|
|
SOC_DOUBLE_R_TLV("Sidetone Volume", WM8961_DSP_SIDETONE_0,
|
|
WM8961_DSP_SIDETONE_1, 4, 12, 0, sidetone_tlv),
|
|
|
|
SOC_SINGLE("ADC High Pass Filter Switch", WM8961_ADC_DAC_CONTROL_1, 0, 1, 0),
|
|
SOC_ENUM("ADC High Pass Filter Mode", adc_hpf),
|
|
|
|
SOC_DOUBLE_R_TLV("Capture Volume",
|
|
WM8961_LEFT_ADC_VOLUME, WM8961_RIGHT_ADC_VOLUME,
|
|
1, 119, 0, adc_tlv),
|
|
SOC_DOUBLE_R_TLV("Capture Boost Volume",
|
|
WM8961_ADCL_SIGNAL_PATH, WM8961_ADCR_SIGNAL_PATH,
|
|
4, 3, 0, boost_tlv),
|
|
SOC_DOUBLE_R_TLV("Capture PGA Volume",
|
|
WM8961_LEFT_INPUT_VOLUME, WM8961_RIGHT_INPUT_VOLUME,
|
|
0, 62, 0, pga_tlv),
|
|
SOC_DOUBLE_R("Capture PGA ZC Switch",
|
|
WM8961_LEFT_INPUT_VOLUME, WM8961_RIGHT_INPUT_VOLUME,
|
|
6, 1, 1),
|
|
SOC_DOUBLE_R("Capture PGA Switch",
|
|
WM8961_LEFT_INPUT_VOLUME, WM8961_RIGHT_INPUT_VOLUME,
|
|
7, 1, 1),
|
|
};
|
|
|
|
static const char *sidetone_text[] = {
|
|
"None", "Left", "Right"
|
|
};
|
|
|
|
static const struct soc_enum dacl_sidetone =
|
|
SOC_ENUM_SINGLE(WM8961_DSP_SIDETONE_0, 2, 3, sidetone_text);
|
|
|
|
static const struct soc_enum dacr_sidetone =
|
|
SOC_ENUM_SINGLE(WM8961_DSP_SIDETONE_1, 2, 3, sidetone_text);
|
|
|
|
static const struct snd_kcontrol_new dacl_mux =
|
|
SOC_DAPM_ENUM("DACL Sidetone", dacl_sidetone);
|
|
|
|
static const struct snd_kcontrol_new dacr_mux =
|
|
SOC_DAPM_ENUM("DACR Sidetone", dacr_sidetone);
|
|
|
|
static const struct snd_soc_dapm_widget wm8961_dapm_widgets[] = {
|
|
SND_SOC_DAPM_INPUT("LINPUT"),
|
|
SND_SOC_DAPM_INPUT("RINPUT"),
|
|
|
|
SND_SOC_DAPM_SUPPLY("CLK_DSP", WM8961_CLOCKING2, 4, 0, NULL, 0),
|
|
|
|
SND_SOC_DAPM_PGA("Left Input", WM8961_PWR_MGMT_1, 5, 0, NULL, 0),
|
|
SND_SOC_DAPM_PGA("Right Input", WM8961_PWR_MGMT_1, 4, 0, NULL, 0),
|
|
|
|
SND_SOC_DAPM_ADC("ADCL", "HiFi Capture", WM8961_PWR_MGMT_1, 3, 0),
|
|
SND_SOC_DAPM_ADC("ADCR", "HiFi Capture", WM8961_PWR_MGMT_1, 2, 0),
|
|
|
|
SND_SOC_DAPM_SUPPLY("MICBIAS", WM8961_PWR_MGMT_1, 1, 0, NULL, 0),
|
|
|
|
SND_SOC_DAPM_MUX("DACL Sidetone", SND_SOC_NOPM, 0, 0, &dacl_mux),
|
|
SND_SOC_DAPM_MUX("DACR Sidetone", SND_SOC_NOPM, 0, 0, &dacr_mux),
|
|
|
|
SND_SOC_DAPM_DAC("DACL", "HiFi Playback", WM8961_PWR_MGMT_2, 8, 0),
|
|
SND_SOC_DAPM_DAC("DACR", "HiFi Playback", WM8961_PWR_MGMT_2, 7, 0),
|
|
|
|
/* Handle as a mono path for DCS */
|
|
SND_SOC_DAPM_PGA_E("Headphone Output", SND_SOC_NOPM,
|
|
4, 0, NULL, 0, wm8961_hp_event,
|
|
SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD),
|
|
SND_SOC_DAPM_PGA_E("Speaker Output", SND_SOC_NOPM,
|
|
4, 0, NULL, 0, wm8961_spk_event,
|
|
SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD),
|
|
|
|
SND_SOC_DAPM_OUTPUT("HP_L"),
|
|
SND_SOC_DAPM_OUTPUT("HP_R"),
|
|
SND_SOC_DAPM_OUTPUT("SPK_LN"),
|
|
SND_SOC_DAPM_OUTPUT("SPK_LP"),
|
|
SND_SOC_DAPM_OUTPUT("SPK_RN"),
|
|
SND_SOC_DAPM_OUTPUT("SPK_RP"),
|
|
};
|
|
|
|
|
|
static const struct snd_soc_dapm_route audio_paths[] = {
|
|
{ "DACL", NULL, "CLK_DSP" },
|
|
{ "DACL", NULL, "DACL Sidetone" },
|
|
{ "DACR", NULL, "CLK_DSP" },
|
|
{ "DACR", NULL, "DACR Sidetone" },
|
|
|
|
{ "DACL Sidetone", "Left", "ADCL" },
|
|
{ "DACL Sidetone", "Right", "ADCR" },
|
|
|
|
{ "DACR Sidetone", "Left", "ADCL" },
|
|
{ "DACR Sidetone", "Right", "ADCR" },
|
|
|
|
{ "HP_L", NULL, "Headphone Output" },
|
|
{ "HP_R", NULL, "Headphone Output" },
|
|
{ "Headphone Output", NULL, "DACL" },
|
|
{ "Headphone Output", NULL, "DACR" },
|
|
|
|
{ "SPK_LN", NULL, "Speaker Output" },
|
|
{ "SPK_LP", NULL, "Speaker Output" },
|
|
{ "SPK_RN", NULL, "Speaker Output" },
|
|
{ "SPK_RP", NULL, "Speaker Output" },
|
|
|
|
{ "Speaker Output", NULL, "DACL" },
|
|
{ "Speaker Output", NULL, "DACR" },
|
|
|
|
{ "ADCL", NULL, "Left Input" },
|
|
{ "ADCL", NULL, "CLK_DSP" },
|
|
{ "ADCR", NULL, "Right Input" },
|
|
{ "ADCR", NULL, "CLK_DSP" },
|
|
|
|
{ "Left Input", NULL, "LINPUT" },
|
|
{ "Right Input", NULL, "RINPUT" },
|
|
|
|
};
|
|
|
|
/* Values for CLK_SYS_RATE */
|
|
static struct {
|
|
int ratio;
|
|
u16 val;
|
|
} wm8961_clk_sys_ratio[] = {
|
|
{ 64, 0 },
|
|
{ 128, 1 },
|
|
{ 192, 2 },
|
|
{ 256, 3 },
|
|
{ 384, 4 },
|
|
{ 512, 5 },
|
|
{ 768, 6 },
|
|
{ 1024, 7 },
|
|
{ 1408, 8 },
|
|
{ 1536, 9 },
|
|
};
|
|
|
|
/* Values for SAMPLE_RATE */
|
|
static struct {
|
|
int rate;
|
|
u16 val;
|
|
} wm8961_srate[] = {
|
|
{ 48000, 0 },
|
|
{ 44100, 0 },
|
|
{ 32000, 1 },
|
|
{ 22050, 2 },
|
|
{ 24000, 2 },
|
|
{ 16000, 3 },
|
|
{ 11250, 4 },
|
|
{ 12000, 4 },
|
|
{ 8000, 5 },
|
|
};
|
|
|
|
static int wm8961_hw_params(struct snd_pcm_substream *substream,
|
|
struct snd_pcm_hw_params *params,
|
|
struct snd_soc_dai *dai)
|
|
{
|
|
struct snd_soc_codec *codec = dai->codec;
|
|
struct wm8961_priv *wm8961 = snd_soc_codec_get_drvdata(codec);
|
|
int i, best, target, fs;
|
|
u16 reg;
|
|
|
|
fs = params_rate(params);
|
|
|
|
if (!wm8961->sysclk) {
|
|
dev_err(codec->dev, "MCLK has not been specified\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Find the closest sample rate for the filters */
|
|
best = 0;
|
|
for (i = 0; i < ARRAY_SIZE(wm8961_srate); i++) {
|
|
if (abs(wm8961_srate[i].rate - fs) <
|
|
abs(wm8961_srate[best].rate - fs))
|
|
best = i;
|
|
}
|
|
reg = snd_soc_read(codec, WM8961_ADDITIONAL_CONTROL_3);
|
|
reg &= ~WM8961_SAMPLE_RATE_MASK;
|
|
reg |= wm8961_srate[best].val;
|
|
snd_soc_write(codec, WM8961_ADDITIONAL_CONTROL_3, reg);
|
|
dev_dbg(codec->dev, "Selected SRATE %dHz for %dHz\n",
|
|
wm8961_srate[best].rate, fs);
|
|
|
|
/* Select a CLK_SYS/fs ratio equal to or higher than required */
|
|
target = wm8961->sysclk / fs;
|
|
|
|
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK && target < 64) {
|
|
dev_err(codec->dev,
|
|
"SYSCLK must be at least 64*fs for DAC\n");
|
|
return -EINVAL;
|
|
}
|
|
if (substream->stream == SNDRV_PCM_STREAM_CAPTURE && target < 256) {
|
|
dev_err(codec->dev,
|
|
"SYSCLK must be at least 256*fs for ADC\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
for (i = 0; i < ARRAY_SIZE(wm8961_clk_sys_ratio); i++) {
|
|
if (wm8961_clk_sys_ratio[i].ratio >= target)
|
|
break;
|
|
}
|
|
if (i == ARRAY_SIZE(wm8961_clk_sys_ratio)) {
|
|
dev_err(codec->dev, "Unable to generate CLK_SYS_RATE\n");
|
|
return -EINVAL;
|
|
}
|
|
dev_dbg(codec->dev, "Selected CLK_SYS_RATE of %d for %d/%d=%d\n",
|
|
wm8961_clk_sys_ratio[i].ratio, wm8961->sysclk, fs,
|
|
wm8961->sysclk / fs);
|
|
|
|
reg = snd_soc_read(codec, WM8961_CLOCKING_4);
|
|
reg &= ~WM8961_CLK_SYS_RATE_MASK;
|
|
reg |= wm8961_clk_sys_ratio[i].val << WM8961_CLK_SYS_RATE_SHIFT;
|
|
snd_soc_write(codec, WM8961_CLOCKING_4, reg);
|
|
|
|
reg = snd_soc_read(codec, WM8961_AUDIO_INTERFACE_0);
|
|
reg &= ~WM8961_WL_MASK;
|
|
switch (params_format(params)) {
|
|
case SNDRV_PCM_FORMAT_S16_LE:
|
|
break;
|
|
case SNDRV_PCM_FORMAT_S20_3LE:
|
|
reg |= 1 << WM8961_WL_SHIFT;
|
|
break;
|
|
case SNDRV_PCM_FORMAT_S24_LE:
|
|
reg |= 2 << WM8961_WL_SHIFT;
|
|
break;
|
|
case SNDRV_PCM_FORMAT_S32_LE:
|
|
reg |= 3 << WM8961_WL_SHIFT;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
snd_soc_write(codec, WM8961_AUDIO_INTERFACE_0, reg);
|
|
|
|
/* Sloping stop-band filter is recommended for <= 24kHz */
|
|
reg = snd_soc_read(codec, WM8961_ADC_DAC_CONTROL_2);
|
|
if (fs <= 24000)
|
|
reg |= WM8961_DACSLOPE;
|
|
else
|
|
reg &= ~WM8961_DACSLOPE;
|
|
snd_soc_write(codec, WM8961_ADC_DAC_CONTROL_2, reg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int wm8961_set_sysclk(struct snd_soc_dai *dai, int clk_id,
|
|
unsigned int freq,
|
|
int dir)
|
|
{
|
|
struct snd_soc_codec *codec = dai->codec;
|
|
struct wm8961_priv *wm8961 = snd_soc_codec_get_drvdata(codec);
|
|
u16 reg = snd_soc_read(codec, WM8961_CLOCKING1);
|
|
|
|
if (freq > 33000000) {
|
|
dev_err(codec->dev, "MCLK must be <33MHz\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (freq > 16500000) {
|
|
dev_dbg(codec->dev, "Using MCLK/2 for %dHz MCLK\n", freq);
|
|
reg |= WM8961_MCLKDIV;
|
|
freq /= 2;
|
|
} else {
|
|
dev_dbg(codec->dev, "Using MCLK/1 for %dHz MCLK\n", freq);
|
|
reg &= ~WM8961_MCLKDIV;
|
|
}
|
|
|
|
snd_soc_write(codec, WM8961_CLOCKING1, reg);
|
|
|
|
wm8961->sysclk = freq;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int wm8961_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
|
|
{
|
|
struct snd_soc_codec *codec = dai->codec;
|
|
u16 aif = snd_soc_read(codec, WM8961_AUDIO_INTERFACE_0);
|
|
|
|
aif &= ~(WM8961_BCLKINV | WM8961_LRP |
|
|
WM8961_MS | WM8961_FORMAT_MASK);
|
|
|
|
switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
|
|
case SND_SOC_DAIFMT_CBM_CFM:
|
|
aif |= WM8961_MS;
|
|
break;
|
|
case SND_SOC_DAIFMT_CBS_CFS:
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
|
|
case SND_SOC_DAIFMT_RIGHT_J:
|
|
break;
|
|
|
|
case SND_SOC_DAIFMT_LEFT_J:
|
|
aif |= 1;
|
|
break;
|
|
|
|
case SND_SOC_DAIFMT_I2S:
|
|
aif |= 2;
|
|
break;
|
|
|
|
case SND_SOC_DAIFMT_DSP_B:
|
|
aif |= WM8961_LRP;
|
|
case SND_SOC_DAIFMT_DSP_A:
|
|
aif |= 3;
|
|
switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
|
|
case SND_SOC_DAIFMT_NB_NF:
|
|
case SND_SOC_DAIFMT_IB_NF:
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
break;
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
|
|
case SND_SOC_DAIFMT_NB_NF:
|
|
break;
|
|
case SND_SOC_DAIFMT_NB_IF:
|
|
aif |= WM8961_LRP;
|
|
break;
|
|
case SND_SOC_DAIFMT_IB_NF:
|
|
aif |= WM8961_BCLKINV;
|
|
break;
|
|
case SND_SOC_DAIFMT_IB_IF:
|
|
aif |= WM8961_BCLKINV | WM8961_LRP;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return snd_soc_write(codec, WM8961_AUDIO_INTERFACE_0, aif);
|
|
}
|
|
|
|
static int wm8961_set_tristate(struct snd_soc_dai *dai, int tristate)
|
|
{
|
|
struct snd_soc_codec *codec = dai->codec;
|
|
u16 reg = snd_soc_read(codec, WM8961_ADDITIONAL_CONTROL_2);
|
|
|
|
if (tristate)
|
|
reg |= WM8961_TRIS;
|
|
else
|
|
reg &= ~WM8961_TRIS;
|
|
|
|
return snd_soc_write(codec, WM8961_ADDITIONAL_CONTROL_2, reg);
|
|
}
|
|
|
|
static int wm8961_digital_mute(struct snd_soc_dai *dai, int mute)
|
|
{
|
|
struct snd_soc_codec *codec = dai->codec;
|
|
u16 reg = snd_soc_read(codec, WM8961_ADC_DAC_CONTROL_1);
|
|
|
|
if (mute)
|
|
reg |= WM8961_DACMU;
|
|
else
|
|
reg &= ~WM8961_DACMU;
|
|
|
|
msleep(17);
|
|
|
|
return snd_soc_write(codec, WM8961_ADC_DAC_CONTROL_1, reg);
|
|
}
|
|
|
|
static int wm8961_set_clkdiv(struct snd_soc_dai *dai, int div_id, int div)
|
|
{
|
|
struct snd_soc_codec *codec = dai->codec;
|
|
u16 reg;
|
|
|
|
switch (div_id) {
|
|
case WM8961_BCLK:
|
|
reg = snd_soc_read(codec, WM8961_CLOCKING2);
|
|
reg &= ~WM8961_BCLKDIV_MASK;
|
|
reg |= div;
|
|
snd_soc_write(codec, WM8961_CLOCKING2, reg);
|
|
break;
|
|
|
|
case WM8961_LRCLK:
|
|
reg = snd_soc_read(codec, WM8961_AUDIO_INTERFACE_2);
|
|
reg &= ~WM8961_LRCLK_RATE_MASK;
|
|
reg |= div;
|
|
snd_soc_write(codec, WM8961_AUDIO_INTERFACE_2, reg);
|
|
break;
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int wm8961_set_bias_level(struct snd_soc_codec *codec,
|
|
enum snd_soc_bias_level level)
|
|
{
|
|
u16 reg;
|
|
|
|
/* This is all slightly unusual since we have no bypass paths
|
|
* and the output amplifier structure means we can just slam
|
|
* the biases straight up rather than having to ramp them
|
|
* slowly.
|
|
*/
|
|
switch (level) {
|
|
case SND_SOC_BIAS_ON:
|
|
break;
|
|
|
|
case SND_SOC_BIAS_PREPARE:
|
|
if (codec->dapm.bias_level == SND_SOC_BIAS_STANDBY) {
|
|
/* Enable bias generation */
|
|
reg = snd_soc_read(codec, WM8961_ANTI_POP);
|
|
reg |= WM8961_BUFIOEN | WM8961_BUFDCOPEN;
|
|
snd_soc_write(codec, WM8961_ANTI_POP, reg);
|
|
|
|
/* VMID=2*50k, VREF */
|
|
reg = snd_soc_read(codec, WM8961_PWR_MGMT_1);
|
|
reg &= ~WM8961_VMIDSEL_MASK;
|
|
reg |= (1 << WM8961_VMIDSEL_SHIFT) | WM8961_VREF;
|
|
snd_soc_write(codec, WM8961_PWR_MGMT_1, reg);
|
|
}
|
|
break;
|
|
|
|
case SND_SOC_BIAS_STANDBY:
|
|
if (codec->dapm.bias_level == SND_SOC_BIAS_PREPARE) {
|
|
/* VREF off */
|
|
reg = snd_soc_read(codec, WM8961_PWR_MGMT_1);
|
|
reg &= ~WM8961_VREF;
|
|
snd_soc_write(codec, WM8961_PWR_MGMT_1, reg);
|
|
|
|
/* Bias generation off */
|
|
reg = snd_soc_read(codec, WM8961_ANTI_POP);
|
|
reg &= ~(WM8961_BUFIOEN | WM8961_BUFDCOPEN);
|
|
snd_soc_write(codec, WM8961_ANTI_POP, reg);
|
|
|
|
/* VMID off */
|
|
reg = snd_soc_read(codec, WM8961_PWR_MGMT_1);
|
|
reg &= ~WM8961_VMIDSEL_MASK;
|
|
snd_soc_write(codec, WM8961_PWR_MGMT_1, reg);
|
|
}
|
|
break;
|
|
|
|
case SND_SOC_BIAS_OFF:
|
|
break;
|
|
}
|
|
|
|
codec->dapm.bias_level = level;
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
#define WM8961_RATES SNDRV_PCM_RATE_8000_48000
|
|
|
|
#define WM8961_FORMATS \
|
|
(SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE | \
|
|
SNDRV_PCM_FMTBIT_S24_LE)
|
|
|
|
static const struct snd_soc_dai_ops wm8961_dai_ops = {
|
|
.hw_params = wm8961_hw_params,
|
|
.set_sysclk = wm8961_set_sysclk,
|
|
.set_fmt = wm8961_set_fmt,
|
|
.digital_mute = wm8961_digital_mute,
|
|
.set_tristate = wm8961_set_tristate,
|
|
.set_clkdiv = wm8961_set_clkdiv,
|
|
};
|
|
|
|
static struct snd_soc_dai_driver wm8961_dai = {
|
|
.name = "wm8961-hifi",
|
|
.playback = {
|
|
.stream_name = "HiFi Playback",
|
|
.channels_min = 1,
|
|
.channels_max = 2,
|
|
.rates = WM8961_RATES,
|
|
.formats = WM8961_FORMATS,},
|
|
.capture = {
|
|
.stream_name = "HiFi Capture",
|
|
.channels_min = 1,
|
|
.channels_max = 2,
|
|
.rates = WM8961_RATES,
|
|
.formats = WM8961_FORMATS,},
|
|
.ops = &wm8961_dai_ops,
|
|
};
|
|
|
|
static int wm8961_probe(struct snd_soc_codec *codec)
|
|
{
|
|
struct snd_soc_dapm_context *dapm = &codec->dapm;
|
|
int ret = 0;
|
|
u16 reg;
|
|
|
|
ret = snd_soc_codec_set_cache_io(codec, 8, 16, SND_SOC_I2C);
|
|
if (ret != 0) {
|
|
dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
reg = snd_soc_read(codec, WM8961_SOFTWARE_RESET);
|
|
if (reg != 0x1801) {
|
|
dev_err(codec->dev, "Device is not a WM8961: ID=0x%x\n", reg);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* This isn't volatile - readback doesn't correspond to write */
|
|
codec->cache_bypass = 1;
|
|
reg = snd_soc_read(codec, WM8961_RIGHT_INPUT_VOLUME);
|
|
codec->cache_bypass = 0;
|
|
dev_info(codec->dev, "WM8961 family %d revision %c\n",
|
|
(reg & WM8961_DEVICE_ID_MASK) >> WM8961_DEVICE_ID_SHIFT,
|
|
((reg & WM8961_CHIP_REV_MASK) >> WM8961_CHIP_REV_SHIFT)
|
|
+ 'A');
|
|
|
|
ret = wm8961_reset(codec);
|
|
if (ret < 0) {
|
|
dev_err(codec->dev, "Failed to issue reset\n");
|
|
return ret;
|
|
}
|
|
|
|
/* Enable class W */
|
|
reg = snd_soc_read(codec, WM8961_CHARGE_PUMP_B);
|
|
reg |= WM8961_CP_DYN_PWR_MASK;
|
|
snd_soc_write(codec, WM8961_CHARGE_PUMP_B, reg);
|
|
|
|
/* Latch volume update bits (right channel only, we always
|
|
* write both out) and default ZC on. */
|
|
reg = snd_soc_read(codec, WM8961_ROUT1_VOLUME);
|
|
snd_soc_write(codec, WM8961_ROUT1_VOLUME,
|
|
reg | WM8961_LO1ZC | WM8961_OUT1VU);
|
|
snd_soc_write(codec, WM8961_LOUT1_VOLUME, reg | WM8961_LO1ZC);
|
|
reg = snd_soc_read(codec, WM8961_ROUT2_VOLUME);
|
|
snd_soc_write(codec, WM8961_ROUT2_VOLUME,
|
|
reg | WM8961_SPKRZC | WM8961_SPKVU);
|
|
snd_soc_write(codec, WM8961_LOUT2_VOLUME, reg | WM8961_SPKLZC);
|
|
|
|
reg = snd_soc_read(codec, WM8961_RIGHT_ADC_VOLUME);
|
|
snd_soc_write(codec, WM8961_RIGHT_ADC_VOLUME, reg | WM8961_ADCVU);
|
|
reg = snd_soc_read(codec, WM8961_RIGHT_INPUT_VOLUME);
|
|
snd_soc_write(codec, WM8961_RIGHT_INPUT_VOLUME, reg | WM8961_IPVU);
|
|
|
|
/* Use soft mute by default */
|
|
reg = snd_soc_read(codec, WM8961_ADC_DAC_CONTROL_2);
|
|
reg |= WM8961_DACSMM;
|
|
snd_soc_write(codec, WM8961_ADC_DAC_CONTROL_2, reg);
|
|
|
|
/* Use automatic clocking mode by default; for now this is all
|
|
* we support.
|
|
*/
|
|
reg = snd_soc_read(codec, WM8961_CLOCKING_3);
|
|
reg &= ~WM8961_MANUAL_MODE;
|
|
snd_soc_write(codec, WM8961_CLOCKING_3, reg);
|
|
|
|
wm8961_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
|
|
|
|
snd_soc_add_codec_controls(codec, wm8961_snd_controls,
|
|
ARRAY_SIZE(wm8961_snd_controls));
|
|
snd_soc_dapm_new_controls(dapm, wm8961_dapm_widgets,
|
|
ARRAY_SIZE(wm8961_dapm_widgets));
|
|
snd_soc_dapm_add_routes(dapm, audio_paths, ARRAY_SIZE(audio_paths));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int wm8961_remove(struct snd_soc_codec *codec)
|
|
{
|
|
wm8961_set_bias_level(codec, SND_SOC_BIAS_OFF);
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static int wm8961_suspend(struct snd_soc_codec *codec)
|
|
{
|
|
wm8961_set_bias_level(codec, SND_SOC_BIAS_OFF);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int wm8961_resume(struct snd_soc_codec *codec)
|
|
{
|
|
snd_soc_cache_sync(codec);
|
|
|
|
wm8961_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
|
|
|
|
return 0;
|
|
}
|
|
#else
|
|
#define wm8961_suspend NULL
|
|
#define wm8961_resume NULL
|
|
#endif
|
|
|
|
static struct snd_soc_codec_driver soc_codec_dev_wm8961 = {
|
|
.probe = wm8961_probe,
|
|
.remove = wm8961_remove,
|
|
.suspend = wm8961_suspend,
|
|
.resume = wm8961_resume,
|
|
.set_bias_level = wm8961_set_bias_level,
|
|
.reg_cache_size = ARRAY_SIZE(wm8961_reg_defaults),
|
|
.reg_word_size = sizeof(u16),
|
|
.reg_cache_default = wm8961_reg_defaults,
|
|
.volatile_register = wm8961_volatile_register,
|
|
};
|
|
|
|
static __devinit int wm8961_i2c_probe(struct i2c_client *i2c,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct wm8961_priv *wm8961;
|
|
int ret;
|
|
|
|
wm8961 = devm_kzalloc(&i2c->dev, sizeof(struct wm8961_priv),
|
|
GFP_KERNEL);
|
|
if (wm8961 == NULL)
|
|
return -ENOMEM;
|
|
|
|
i2c_set_clientdata(i2c, wm8961);
|
|
|
|
ret = snd_soc_register_codec(&i2c->dev,
|
|
&soc_codec_dev_wm8961, &wm8961_dai, 1);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static __devexit int wm8961_i2c_remove(struct i2c_client *client)
|
|
{
|
|
snd_soc_unregister_codec(&client->dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct i2c_device_id wm8961_i2c_id[] = {
|
|
{ "wm8961", 0 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, wm8961_i2c_id);
|
|
|
|
static struct i2c_driver wm8961_i2c_driver = {
|
|
.driver = {
|
|
.name = "wm8961",
|
|
.owner = THIS_MODULE,
|
|
},
|
|
.probe = wm8961_i2c_probe,
|
|
.remove = __devexit_p(wm8961_i2c_remove),
|
|
.id_table = wm8961_i2c_id,
|
|
};
|
|
|
|
static int __init wm8961_modinit(void)
|
|
{
|
|
int ret = 0;
|
|
ret = i2c_add_driver(&wm8961_i2c_driver);
|
|
if (ret != 0) {
|
|
printk(KERN_ERR "Failed to register wm8961 I2C driver: %d\n",
|
|
ret);
|
|
}
|
|
return ret;
|
|
}
|
|
module_init(wm8961_modinit);
|
|
|
|
static void __exit wm8961_exit(void)
|
|
{
|
|
i2c_del_driver(&wm8961_i2c_driver);
|
|
}
|
|
module_exit(wm8961_exit);
|
|
|
|
MODULE_DESCRIPTION("ASoC WM8961 driver");
|
|
MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
|
|
MODULE_LICENSE("GPL");
|