mirror of
https://github.com/torvalds/linux.git
synced 2024-12-17 16:43:08 +00:00
aec89ef72b
The GIC controller doesn't provides any facility to configure the wakeup sources. For the same reason, GIC chip implementation can't provide irq_set_wake functionality, but that results in the irqchip core preventing the systems from entering sleep states like "suspend to RAM". The GICv1/v2 controllers support wakeup events. They signal these wakeup events even when CPU interface is disabled which means the wakeup outputs are always enabled with the required logic in always-on domain. An implementation can powerdown the GIC completely, but then the wake-up must be relayed to some control logic within the power controller that acts as wake-up interrupt controller. Setting the IRQCHIP_SKIP_SET_WAKE flags will ensure that the interrupts from GIC can work as wakeup interrupts and resume from suspend-to-{idle, ram}. The wakeup interrupt sources need to use enable_irq_wake() and the irqchip core will then set the IRQD_WAKEUP_STATE flag. Also it's always safer to mask all the non wakeup interrupts are masked at the chip level when suspending. The irqchip infrastructure can handle masking of those interrupts at the chip level. The chip implementation just have to indicate that with IRQCHIP_MASK_ON_SUSPEND. This patch enables IRQCHIP_SKIP_SET_WAKE and IRQCHIP_MASK_ON_SUSPEND so that the irqchip core allows and handles the power managemant wake up modes. Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Simon Horman <horms@verge.net.au> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Gregory CLEMENT <gregory.clement@free-electrons.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1436971109-20189-1-git-send-email-sudeep.holla@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
1147 lines
29 KiB
C
1147 lines
29 KiB
C
/*
|
|
* Copyright (C) 2002 ARM Limited, All Rights Reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* Interrupt architecture for the GIC:
|
|
*
|
|
* o There is one Interrupt Distributor, which receives interrupts
|
|
* from system devices and sends them to the Interrupt Controllers.
|
|
*
|
|
* o There is one CPU Interface per CPU, which sends interrupts sent
|
|
* by the Distributor, and interrupts generated locally, to the
|
|
* associated CPU. The base address of the CPU interface is usually
|
|
* aliased so that the same address points to different chips depending
|
|
* on the CPU it is accessed from.
|
|
*
|
|
* Note that IRQs 0-31 are special - they are local to each CPU.
|
|
* As such, the enable set/clear, pending set/clear and active bit
|
|
* registers are banked per-cpu for these sources.
|
|
*/
|
|
#include <linux/init.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/err.h>
|
|
#include <linux/module.h>
|
|
#include <linux/list.h>
|
|
#include <linux/smp.h>
|
|
#include <linux/cpu.h>
|
|
#include <linux/cpu_pm.h>
|
|
#include <linux/cpumask.h>
|
|
#include <linux/io.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/of_irq.h>
|
|
#include <linux/acpi.h>
|
|
#include <linux/irqdomain.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/percpu.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/irqchip.h>
|
|
#include <linux/irqchip/chained_irq.h>
|
|
#include <linux/irqchip/arm-gic.h>
|
|
#include <linux/irqchip/arm-gic-acpi.h>
|
|
|
|
#include <asm/cputype.h>
|
|
#include <asm/irq.h>
|
|
#include <asm/exception.h>
|
|
#include <asm/smp_plat.h>
|
|
|
|
#include "irq-gic-common.h"
|
|
|
|
union gic_base {
|
|
void __iomem *common_base;
|
|
void __percpu * __iomem *percpu_base;
|
|
};
|
|
|
|
struct gic_chip_data {
|
|
union gic_base dist_base;
|
|
union gic_base cpu_base;
|
|
#ifdef CONFIG_CPU_PM
|
|
u32 saved_spi_enable[DIV_ROUND_UP(1020, 32)];
|
|
u32 saved_spi_conf[DIV_ROUND_UP(1020, 16)];
|
|
u32 saved_spi_target[DIV_ROUND_UP(1020, 4)];
|
|
u32 __percpu *saved_ppi_enable;
|
|
u32 __percpu *saved_ppi_conf;
|
|
#endif
|
|
struct irq_domain *domain;
|
|
unsigned int gic_irqs;
|
|
#ifdef CONFIG_GIC_NON_BANKED
|
|
void __iomem *(*get_base)(union gic_base *);
|
|
#endif
|
|
};
|
|
|
|
static DEFINE_RAW_SPINLOCK(irq_controller_lock);
|
|
|
|
/*
|
|
* The GIC mapping of CPU interfaces does not necessarily match
|
|
* the logical CPU numbering. Let's use a mapping as returned
|
|
* by the GIC itself.
|
|
*/
|
|
#define NR_GIC_CPU_IF 8
|
|
static u8 gic_cpu_map[NR_GIC_CPU_IF] __read_mostly;
|
|
|
|
#ifndef MAX_GIC_NR
|
|
#define MAX_GIC_NR 1
|
|
#endif
|
|
|
|
static struct gic_chip_data gic_data[MAX_GIC_NR] __read_mostly;
|
|
|
|
#ifdef CONFIG_GIC_NON_BANKED
|
|
static void __iomem *gic_get_percpu_base(union gic_base *base)
|
|
{
|
|
return raw_cpu_read(*base->percpu_base);
|
|
}
|
|
|
|
static void __iomem *gic_get_common_base(union gic_base *base)
|
|
{
|
|
return base->common_base;
|
|
}
|
|
|
|
static inline void __iomem *gic_data_dist_base(struct gic_chip_data *data)
|
|
{
|
|
return data->get_base(&data->dist_base);
|
|
}
|
|
|
|
static inline void __iomem *gic_data_cpu_base(struct gic_chip_data *data)
|
|
{
|
|
return data->get_base(&data->cpu_base);
|
|
}
|
|
|
|
static inline void gic_set_base_accessor(struct gic_chip_data *data,
|
|
void __iomem *(*f)(union gic_base *))
|
|
{
|
|
data->get_base = f;
|
|
}
|
|
#else
|
|
#define gic_data_dist_base(d) ((d)->dist_base.common_base)
|
|
#define gic_data_cpu_base(d) ((d)->cpu_base.common_base)
|
|
#define gic_set_base_accessor(d, f)
|
|
#endif
|
|
|
|
static inline void __iomem *gic_dist_base(struct irq_data *d)
|
|
{
|
|
struct gic_chip_data *gic_data = irq_data_get_irq_chip_data(d);
|
|
return gic_data_dist_base(gic_data);
|
|
}
|
|
|
|
static inline void __iomem *gic_cpu_base(struct irq_data *d)
|
|
{
|
|
struct gic_chip_data *gic_data = irq_data_get_irq_chip_data(d);
|
|
return gic_data_cpu_base(gic_data);
|
|
}
|
|
|
|
static inline unsigned int gic_irq(struct irq_data *d)
|
|
{
|
|
return d->hwirq;
|
|
}
|
|
|
|
/*
|
|
* Routines to acknowledge, disable and enable interrupts
|
|
*/
|
|
static void gic_poke_irq(struct irq_data *d, u32 offset)
|
|
{
|
|
u32 mask = 1 << (gic_irq(d) % 32);
|
|
writel_relaxed(mask, gic_dist_base(d) + offset + (gic_irq(d) / 32) * 4);
|
|
}
|
|
|
|
static int gic_peek_irq(struct irq_data *d, u32 offset)
|
|
{
|
|
u32 mask = 1 << (gic_irq(d) % 32);
|
|
return !!(readl_relaxed(gic_dist_base(d) + offset + (gic_irq(d) / 32) * 4) & mask);
|
|
}
|
|
|
|
static void gic_mask_irq(struct irq_data *d)
|
|
{
|
|
gic_poke_irq(d, GIC_DIST_ENABLE_CLEAR);
|
|
}
|
|
|
|
static void gic_unmask_irq(struct irq_data *d)
|
|
{
|
|
gic_poke_irq(d, GIC_DIST_ENABLE_SET);
|
|
}
|
|
|
|
static void gic_eoi_irq(struct irq_data *d)
|
|
{
|
|
writel_relaxed(gic_irq(d), gic_cpu_base(d) + GIC_CPU_EOI);
|
|
}
|
|
|
|
static int gic_irq_set_irqchip_state(struct irq_data *d,
|
|
enum irqchip_irq_state which, bool val)
|
|
{
|
|
u32 reg;
|
|
|
|
switch (which) {
|
|
case IRQCHIP_STATE_PENDING:
|
|
reg = val ? GIC_DIST_PENDING_SET : GIC_DIST_PENDING_CLEAR;
|
|
break;
|
|
|
|
case IRQCHIP_STATE_ACTIVE:
|
|
reg = val ? GIC_DIST_ACTIVE_SET : GIC_DIST_ACTIVE_CLEAR;
|
|
break;
|
|
|
|
case IRQCHIP_STATE_MASKED:
|
|
reg = val ? GIC_DIST_ENABLE_CLEAR : GIC_DIST_ENABLE_SET;
|
|
break;
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
gic_poke_irq(d, reg);
|
|
return 0;
|
|
}
|
|
|
|
static int gic_irq_get_irqchip_state(struct irq_data *d,
|
|
enum irqchip_irq_state which, bool *val)
|
|
{
|
|
switch (which) {
|
|
case IRQCHIP_STATE_PENDING:
|
|
*val = gic_peek_irq(d, GIC_DIST_PENDING_SET);
|
|
break;
|
|
|
|
case IRQCHIP_STATE_ACTIVE:
|
|
*val = gic_peek_irq(d, GIC_DIST_ACTIVE_SET);
|
|
break;
|
|
|
|
case IRQCHIP_STATE_MASKED:
|
|
*val = !gic_peek_irq(d, GIC_DIST_ENABLE_SET);
|
|
break;
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int gic_set_type(struct irq_data *d, unsigned int type)
|
|
{
|
|
void __iomem *base = gic_dist_base(d);
|
|
unsigned int gicirq = gic_irq(d);
|
|
|
|
/* Interrupt configuration for SGIs can't be changed */
|
|
if (gicirq < 16)
|
|
return -EINVAL;
|
|
|
|
/* SPIs have restrictions on the supported types */
|
|
if (gicirq >= 32 && type != IRQ_TYPE_LEVEL_HIGH &&
|
|
type != IRQ_TYPE_EDGE_RISING)
|
|
return -EINVAL;
|
|
|
|
return gic_configure_irq(gicirq, type, base, NULL);
|
|
}
|
|
|
|
#ifdef CONFIG_SMP
|
|
static int gic_set_affinity(struct irq_data *d, const struct cpumask *mask_val,
|
|
bool force)
|
|
{
|
|
void __iomem *reg = gic_dist_base(d) + GIC_DIST_TARGET + (gic_irq(d) & ~3);
|
|
unsigned int cpu, shift = (gic_irq(d) % 4) * 8;
|
|
u32 val, mask, bit;
|
|
unsigned long flags;
|
|
|
|
if (!force)
|
|
cpu = cpumask_any_and(mask_val, cpu_online_mask);
|
|
else
|
|
cpu = cpumask_first(mask_val);
|
|
|
|
if (cpu >= NR_GIC_CPU_IF || cpu >= nr_cpu_ids)
|
|
return -EINVAL;
|
|
|
|
raw_spin_lock_irqsave(&irq_controller_lock, flags);
|
|
mask = 0xff << shift;
|
|
bit = gic_cpu_map[cpu] << shift;
|
|
val = readl_relaxed(reg) & ~mask;
|
|
writel_relaxed(val | bit, reg);
|
|
raw_spin_unlock_irqrestore(&irq_controller_lock, flags);
|
|
|
|
return IRQ_SET_MASK_OK;
|
|
}
|
|
#endif
|
|
|
|
static void __exception_irq_entry gic_handle_irq(struct pt_regs *regs)
|
|
{
|
|
u32 irqstat, irqnr;
|
|
struct gic_chip_data *gic = &gic_data[0];
|
|
void __iomem *cpu_base = gic_data_cpu_base(gic);
|
|
|
|
do {
|
|
irqstat = readl_relaxed(cpu_base + GIC_CPU_INTACK);
|
|
irqnr = irqstat & GICC_IAR_INT_ID_MASK;
|
|
|
|
if (likely(irqnr > 15 && irqnr < 1021)) {
|
|
handle_domain_irq(gic->domain, irqnr, regs);
|
|
continue;
|
|
}
|
|
if (irqnr < 16) {
|
|
writel_relaxed(irqstat, cpu_base + GIC_CPU_EOI);
|
|
#ifdef CONFIG_SMP
|
|
handle_IPI(irqnr, regs);
|
|
#endif
|
|
continue;
|
|
}
|
|
break;
|
|
} while (1);
|
|
}
|
|
|
|
static void gic_handle_cascade_irq(unsigned int irq, struct irq_desc *desc)
|
|
{
|
|
struct gic_chip_data *chip_data = irq_desc_get_handler_data(desc);
|
|
struct irq_chip *chip = irq_desc_get_chip(desc);
|
|
unsigned int cascade_irq, gic_irq;
|
|
unsigned long status;
|
|
|
|
chained_irq_enter(chip, desc);
|
|
|
|
raw_spin_lock(&irq_controller_lock);
|
|
status = readl_relaxed(gic_data_cpu_base(chip_data) + GIC_CPU_INTACK);
|
|
raw_spin_unlock(&irq_controller_lock);
|
|
|
|
gic_irq = (status & GICC_IAR_INT_ID_MASK);
|
|
if (gic_irq == GICC_INT_SPURIOUS)
|
|
goto out;
|
|
|
|
cascade_irq = irq_find_mapping(chip_data->domain, gic_irq);
|
|
if (unlikely(gic_irq < 32 || gic_irq > 1020))
|
|
handle_bad_irq(cascade_irq, desc);
|
|
else
|
|
generic_handle_irq(cascade_irq);
|
|
|
|
out:
|
|
chained_irq_exit(chip, desc);
|
|
}
|
|
|
|
static struct irq_chip gic_chip = {
|
|
.name = "GIC",
|
|
.irq_mask = gic_mask_irq,
|
|
.irq_unmask = gic_unmask_irq,
|
|
.irq_eoi = gic_eoi_irq,
|
|
.irq_set_type = gic_set_type,
|
|
#ifdef CONFIG_SMP
|
|
.irq_set_affinity = gic_set_affinity,
|
|
#endif
|
|
.irq_get_irqchip_state = gic_irq_get_irqchip_state,
|
|
.irq_set_irqchip_state = gic_irq_set_irqchip_state,
|
|
.flags = IRQCHIP_SET_TYPE_MASKED |
|
|
IRQCHIP_SKIP_SET_WAKE |
|
|
IRQCHIP_MASK_ON_SUSPEND,
|
|
};
|
|
|
|
void __init gic_cascade_irq(unsigned int gic_nr, unsigned int irq)
|
|
{
|
|
if (gic_nr >= MAX_GIC_NR)
|
|
BUG();
|
|
irq_set_chained_handler_and_data(irq, gic_handle_cascade_irq,
|
|
&gic_data[gic_nr]);
|
|
}
|
|
|
|
static u8 gic_get_cpumask(struct gic_chip_data *gic)
|
|
{
|
|
void __iomem *base = gic_data_dist_base(gic);
|
|
u32 mask, i;
|
|
|
|
for (i = mask = 0; i < 32; i += 4) {
|
|
mask = readl_relaxed(base + GIC_DIST_TARGET + i);
|
|
mask |= mask >> 16;
|
|
mask |= mask >> 8;
|
|
if (mask)
|
|
break;
|
|
}
|
|
|
|
if (!mask && num_possible_cpus() > 1)
|
|
pr_crit("GIC CPU mask not found - kernel will fail to boot.\n");
|
|
|
|
return mask;
|
|
}
|
|
|
|
static void gic_cpu_if_up(void)
|
|
{
|
|
void __iomem *cpu_base = gic_data_cpu_base(&gic_data[0]);
|
|
u32 bypass = 0;
|
|
|
|
/*
|
|
* Preserve bypass disable bits to be written back later
|
|
*/
|
|
bypass = readl(cpu_base + GIC_CPU_CTRL);
|
|
bypass &= GICC_DIS_BYPASS_MASK;
|
|
|
|
writel_relaxed(bypass | GICC_ENABLE, cpu_base + GIC_CPU_CTRL);
|
|
}
|
|
|
|
|
|
static void __init gic_dist_init(struct gic_chip_data *gic)
|
|
{
|
|
unsigned int i;
|
|
u32 cpumask;
|
|
unsigned int gic_irqs = gic->gic_irqs;
|
|
void __iomem *base = gic_data_dist_base(gic);
|
|
|
|
writel_relaxed(GICD_DISABLE, base + GIC_DIST_CTRL);
|
|
|
|
/*
|
|
* Set all global interrupts to this CPU only.
|
|
*/
|
|
cpumask = gic_get_cpumask(gic);
|
|
cpumask |= cpumask << 8;
|
|
cpumask |= cpumask << 16;
|
|
for (i = 32; i < gic_irqs; i += 4)
|
|
writel_relaxed(cpumask, base + GIC_DIST_TARGET + i * 4 / 4);
|
|
|
|
gic_dist_config(base, gic_irqs, NULL);
|
|
|
|
writel_relaxed(GICD_ENABLE, base + GIC_DIST_CTRL);
|
|
}
|
|
|
|
static void gic_cpu_init(struct gic_chip_data *gic)
|
|
{
|
|
void __iomem *dist_base = gic_data_dist_base(gic);
|
|
void __iomem *base = gic_data_cpu_base(gic);
|
|
unsigned int cpu_mask, cpu = smp_processor_id();
|
|
int i;
|
|
|
|
/*
|
|
* Get what the GIC says our CPU mask is.
|
|
*/
|
|
BUG_ON(cpu >= NR_GIC_CPU_IF);
|
|
cpu_mask = gic_get_cpumask(gic);
|
|
gic_cpu_map[cpu] = cpu_mask;
|
|
|
|
/*
|
|
* Clear our mask from the other map entries in case they're
|
|
* still undefined.
|
|
*/
|
|
for (i = 0; i < NR_GIC_CPU_IF; i++)
|
|
if (i != cpu)
|
|
gic_cpu_map[i] &= ~cpu_mask;
|
|
|
|
gic_cpu_config(dist_base, NULL);
|
|
|
|
writel_relaxed(GICC_INT_PRI_THRESHOLD, base + GIC_CPU_PRIMASK);
|
|
gic_cpu_if_up();
|
|
}
|
|
|
|
void gic_cpu_if_down(void)
|
|
{
|
|
void __iomem *cpu_base = gic_data_cpu_base(&gic_data[0]);
|
|
u32 val = 0;
|
|
|
|
val = readl(cpu_base + GIC_CPU_CTRL);
|
|
val &= ~GICC_ENABLE;
|
|
writel_relaxed(val, cpu_base + GIC_CPU_CTRL);
|
|
}
|
|
|
|
#ifdef CONFIG_CPU_PM
|
|
/*
|
|
* Saves the GIC distributor registers during suspend or idle. Must be called
|
|
* with interrupts disabled but before powering down the GIC. After calling
|
|
* this function, no interrupts will be delivered by the GIC, and another
|
|
* platform-specific wakeup source must be enabled.
|
|
*/
|
|
static void gic_dist_save(unsigned int gic_nr)
|
|
{
|
|
unsigned int gic_irqs;
|
|
void __iomem *dist_base;
|
|
int i;
|
|
|
|
if (gic_nr >= MAX_GIC_NR)
|
|
BUG();
|
|
|
|
gic_irqs = gic_data[gic_nr].gic_irqs;
|
|
dist_base = gic_data_dist_base(&gic_data[gic_nr]);
|
|
|
|
if (!dist_base)
|
|
return;
|
|
|
|
for (i = 0; i < DIV_ROUND_UP(gic_irqs, 16); i++)
|
|
gic_data[gic_nr].saved_spi_conf[i] =
|
|
readl_relaxed(dist_base + GIC_DIST_CONFIG + i * 4);
|
|
|
|
for (i = 0; i < DIV_ROUND_UP(gic_irqs, 4); i++)
|
|
gic_data[gic_nr].saved_spi_target[i] =
|
|
readl_relaxed(dist_base + GIC_DIST_TARGET + i * 4);
|
|
|
|
for (i = 0; i < DIV_ROUND_UP(gic_irqs, 32); i++)
|
|
gic_data[gic_nr].saved_spi_enable[i] =
|
|
readl_relaxed(dist_base + GIC_DIST_ENABLE_SET + i * 4);
|
|
}
|
|
|
|
/*
|
|
* Restores the GIC distributor registers during resume or when coming out of
|
|
* idle. Must be called before enabling interrupts. If a level interrupt
|
|
* that occured while the GIC was suspended is still present, it will be
|
|
* handled normally, but any edge interrupts that occured will not be seen by
|
|
* the GIC and need to be handled by the platform-specific wakeup source.
|
|
*/
|
|
static void gic_dist_restore(unsigned int gic_nr)
|
|
{
|
|
unsigned int gic_irqs;
|
|
unsigned int i;
|
|
void __iomem *dist_base;
|
|
|
|
if (gic_nr >= MAX_GIC_NR)
|
|
BUG();
|
|
|
|
gic_irqs = gic_data[gic_nr].gic_irqs;
|
|
dist_base = gic_data_dist_base(&gic_data[gic_nr]);
|
|
|
|
if (!dist_base)
|
|
return;
|
|
|
|
writel_relaxed(GICD_DISABLE, dist_base + GIC_DIST_CTRL);
|
|
|
|
for (i = 0; i < DIV_ROUND_UP(gic_irqs, 16); i++)
|
|
writel_relaxed(gic_data[gic_nr].saved_spi_conf[i],
|
|
dist_base + GIC_DIST_CONFIG + i * 4);
|
|
|
|
for (i = 0; i < DIV_ROUND_UP(gic_irqs, 4); i++)
|
|
writel_relaxed(GICD_INT_DEF_PRI_X4,
|
|
dist_base + GIC_DIST_PRI + i * 4);
|
|
|
|
for (i = 0; i < DIV_ROUND_UP(gic_irqs, 4); i++)
|
|
writel_relaxed(gic_data[gic_nr].saved_spi_target[i],
|
|
dist_base + GIC_DIST_TARGET + i * 4);
|
|
|
|
for (i = 0; i < DIV_ROUND_UP(gic_irqs, 32); i++)
|
|
writel_relaxed(gic_data[gic_nr].saved_spi_enable[i],
|
|
dist_base + GIC_DIST_ENABLE_SET + i * 4);
|
|
|
|
writel_relaxed(GICD_ENABLE, dist_base + GIC_DIST_CTRL);
|
|
}
|
|
|
|
static void gic_cpu_save(unsigned int gic_nr)
|
|
{
|
|
int i;
|
|
u32 *ptr;
|
|
void __iomem *dist_base;
|
|
void __iomem *cpu_base;
|
|
|
|
if (gic_nr >= MAX_GIC_NR)
|
|
BUG();
|
|
|
|
dist_base = gic_data_dist_base(&gic_data[gic_nr]);
|
|
cpu_base = gic_data_cpu_base(&gic_data[gic_nr]);
|
|
|
|
if (!dist_base || !cpu_base)
|
|
return;
|
|
|
|
ptr = raw_cpu_ptr(gic_data[gic_nr].saved_ppi_enable);
|
|
for (i = 0; i < DIV_ROUND_UP(32, 32); i++)
|
|
ptr[i] = readl_relaxed(dist_base + GIC_DIST_ENABLE_SET + i * 4);
|
|
|
|
ptr = raw_cpu_ptr(gic_data[gic_nr].saved_ppi_conf);
|
|
for (i = 0; i < DIV_ROUND_UP(32, 16); i++)
|
|
ptr[i] = readl_relaxed(dist_base + GIC_DIST_CONFIG + i * 4);
|
|
|
|
}
|
|
|
|
static void gic_cpu_restore(unsigned int gic_nr)
|
|
{
|
|
int i;
|
|
u32 *ptr;
|
|
void __iomem *dist_base;
|
|
void __iomem *cpu_base;
|
|
|
|
if (gic_nr >= MAX_GIC_NR)
|
|
BUG();
|
|
|
|
dist_base = gic_data_dist_base(&gic_data[gic_nr]);
|
|
cpu_base = gic_data_cpu_base(&gic_data[gic_nr]);
|
|
|
|
if (!dist_base || !cpu_base)
|
|
return;
|
|
|
|
ptr = raw_cpu_ptr(gic_data[gic_nr].saved_ppi_enable);
|
|
for (i = 0; i < DIV_ROUND_UP(32, 32); i++)
|
|
writel_relaxed(ptr[i], dist_base + GIC_DIST_ENABLE_SET + i * 4);
|
|
|
|
ptr = raw_cpu_ptr(gic_data[gic_nr].saved_ppi_conf);
|
|
for (i = 0; i < DIV_ROUND_UP(32, 16); i++)
|
|
writel_relaxed(ptr[i], dist_base + GIC_DIST_CONFIG + i * 4);
|
|
|
|
for (i = 0; i < DIV_ROUND_UP(32, 4); i++)
|
|
writel_relaxed(GICD_INT_DEF_PRI_X4,
|
|
dist_base + GIC_DIST_PRI + i * 4);
|
|
|
|
writel_relaxed(GICC_INT_PRI_THRESHOLD, cpu_base + GIC_CPU_PRIMASK);
|
|
gic_cpu_if_up();
|
|
}
|
|
|
|
static int gic_notifier(struct notifier_block *self, unsigned long cmd, void *v)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < MAX_GIC_NR; i++) {
|
|
#ifdef CONFIG_GIC_NON_BANKED
|
|
/* Skip over unused GICs */
|
|
if (!gic_data[i].get_base)
|
|
continue;
|
|
#endif
|
|
switch (cmd) {
|
|
case CPU_PM_ENTER:
|
|
gic_cpu_save(i);
|
|
break;
|
|
case CPU_PM_ENTER_FAILED:
|
|
case CPU_PM_EXIT:
|
|
gic_cpu_restore(i);
|
|
break;
|
|
case CPU_CLUSTER_PM_ENTER:
|
|
gic_dist_save(i);
|
|
break;
|
|
case CPU_CLUSTER_PM_ENTER_FAILED:
|
|
case CPU_CLUSTER_PM_EXIT:
|
|
gic_dist_restore(i);
|
|
break;
|
|
}
|
|
}
|
|
|
|
return NOTIFY_OK;
|
|
}
|
|
|
|
static struct notifier_block gic_notifier_block = {
|
|
.notifier_call = gic_notifier,
|
|
};
|
|
|
|
static void __init gic_pm_init(struct gic_chip_data *gic)
|
|
{
|
|
gic->saved_ppi_enable = __alloc_percpu(DIV_ROUND_UP(32, 32) * 4,
|
|
sizeof(u32));
|
|
BUG_ON(!gic->saved_ppi_enable);
|
|
|
|
gic->saved_ppi_conf = __alloc_percpu(DIV_ROUND_UP(32, 16) * 4,
|
|
sizeof(u32));
|
|
BUG_ON(!gic->saved_ppi_conf);
|
|
|
|
if (gic == &gic_data[0])
|
|
cpu_pm_register_notifier(&gic_notifier_block);
|
|
}
|
|
#else
|
|
static void __init gic_pm_init(struct gic_chip_data *gic)
|
|
{
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_SMP
|
|
static void gic_raise_softirq(const struct cpumask *mask, unsigned int irq)
|
|
{
|
|
int cpu;
|
|
unsigned long flags, map = 0;
|
|
|
|
raw_spin_lock_irqsave(&irq_controller_lock, flags);
|
|
|
|
/* Convert our logical CPU mask into a physical one. */
|
|
for_each_cpu(cpu, mask)
|
|
map |= gic_cpu_map[cpu];
|
|
|
|
/*
|
|
* Ensure that stores to Normal memory are visible to the
|
|
* other CPUs before they observe us issuing the IPI.
|
|
*/
|
|
dmb(ishst);
|
|
|
|
/* this always happens on GIC0 */
|
|
writel_relaxed(map << 16 | irq, gic_data_dist_base(&gic_data[0]) + GIC_DIST_SOFTINT);
|
|
|
|
raw_spin_unlock_irqrestore(&irq_controller_lock, flags);
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_BL_SWITCHER
|
|
/*
|
|
* gic_send_sgi - send a SGI directly to given CPU interface number
|
|
*
|
|
* cpu_id: the ID for the destination CPU interface
|
|
* irq: the IPI number to send a SGI for
|
|
*/
|
|
void gic_send_sgi(unsigned int cpu_id, unsigned int irq)
|
|
{
|
|
BUG_ON(cpu_id >= NR_GIC_CPU_IF);
|
|
cpu_id = 1 << cpu_id;
|
|
/* this always happens on GIC0 */
|
|
writel_relaxed((cpu_id << 16) | irq, gic_data_dist_base(&gic_data[0]) + GIC_DIST_SOFTINT);
|
|
}
|
|
|
|
/*
|
|
* gic_get_cpu_id - get the CPU interface ID for the specified CPU
|
|
*
|
|
* @cpu: the logical CPU number to get the GIC ID for.
|
|
*
|
|
* Return the CPU interface ID for the given logical CPU number,
|
|
* or -1 if the CPU number is too large or the interface ID is
|
|
* unknown (more than one bit set).
|
|
*/
|
|
int gic_get_cpu_id(unsigned int cpu)
|
|
{
|
|
unsigned int cpu_bit;
|
|
|
|
if (cpu >= NR_GIC_CPU_IF)
|
|
return -1;
|
|
cpu_bit = gic_cpu_map[cpu];
|
|
if (cpu_bit & (cpu_bit - 1))
|
|
return -1;
|
|
return __ffs(cpu_bit);
|
|
}
|
|
|
|
/*
|
|
* gic_migrate_target - migrate IRQs to another CPU interface
|
|
*
|
|
* @new_cpu_id: the CPU target ID to migrate IRQs to
|
|
*
|
|
* Migrate all peripheral interrupts with a target matching the current CPU
|
|
* to the interface corresponding to @new_cpu_id. The CPU interface mapping
|
|
* is also updated. Targets to other CPU interfaces are unchanged.
|
|
* This must be called with IRQs locally disabled.
|
|
*/
|
|
void gic_migrate_target(unsigned int new_cpu_id)
|
|
{
|
|
unsigned int cur_cpu_id, gic_irqs, gic_nr = 0;
|
|
void __iomem *dist_base;
|
|
int i, ror_val, cpu = smp_processor_id();
|
|
u32 val, cur_target_mask, active_mask;
|
|
|
|
if (gic_nr >= MAX_GIC_NR)
|
|
BUG();
|
|
|
|
dist_base = gic_data_dist_base(&gic_data[gic_nr]);
|
|
if (!dist_base)
|
|
return;
|
|
gic_irqs = gic_data[gic_nr].gic_irqs;
|
|
|
|
cur_cpu_id = __ffs(gic_cpu_map[cpu]);
|
|
cur_target_mask = 0x01010101 << cur_cpu_id;
|
|
ror_val = (cur_cpu_id - new_cpu_id) & 31;
|
|
|
|
raw_spin_lock(&irq_controller_lock);
|
|
|
|
/* Update the target interface for this logical CPU */
|
|
gic_cpu_map[cpu] = 1 << new_cpu_id;
|
|
|
|
/*
|
|
* Find all the peripheral interrupts targetting the current
|
|
* CPU interface and migrate them to the new CPU interface.
|
|
* We skip DIST_TARGET 0 to 7 as they are read-only.
|
|
*/
|
|
for (i = 8; i < DIV_ROUND_UP(gic_irqs, 4); i++) {
|
|
val = readl_relaxed(dist_base + GIC_DIST_TARGET + i * 4);
|
|
active_mask = val & cur_target_mask;
|
|
if (active_mask) {
|
|
val &= ~active_mask;
|
|
val |= ror32(active_mask, ror_val);
|
|
writel_relaxed(val, dist_base + GIC_DIST_TARGET + i*4);
|
|
}
|
|
}
|
|
|
|
raw_spin_unlock(&irq_controller_lock);
|
|
|
|
/*
|
|
* Now let's migrate and clear any potential SGIs that might be
|
|
* pending for us (cur_cpu_id). Since GIC_DIST_SGI_PENDING_SET
|
|
* is a banked register, we can only forward the SGI using
|
|
* GIC_DIST_SOFTINT. The original SGI source is lost but Linux
|
|
* doesn't use that information anyway.
|
|
*
|
|
* For the same reason we do not adjust SGI source information
|
|
* for previously sent SGIs by us to other CPUs either.
|
|
*/
|
|
for (i = 0; i < 16; i += 4) {
|
|
int j;
|
|
val = readl_relaxed(dist_base + GIC_DIST_SGI_PENDING_SET + i);
|
|
if (!val)
|
|
continue;
|
|
writel_relaxed(val, dist_base + GIC_DIST_SGI_PENDING_CLEAR + i);
|
|
for (j = i; j < i + 4; j++) {
|
|
if (val & 0xff)
|
|
writel_relaxed((1 << (new_cpu_id + 16)) | j,
|
|
dist_base + GIC_DIST_SOFTINT);
|
|
val >>= 8;
|
|
}
|
|
}
|
|
}
|
|
|
|
/*
|
|
* gic_get_sgir_physaddr - get the physical address for the SGI register
|
|
*
|
|
* REturn the physical address of the SGI register to be used
|
|
* by some early assembly code when the kernel is not yet available.
|
|
*/
|
|
static unsigned long gic_dist_physaddr;
|
|
|
|
unsigned long gic_get_sgir_physaddr(void)
|
|
{
|
|
if (!gic_dist_physaddr)
|
|
return 0;
|
|
return gic_dist_physaddr + GIC_DIST_SOFTINT;
|
|
}
|
|
|
|
void __init gic_init_physaddr(struct device_node *node)
|
|
{
|
|
struct resource res;
|
|
if (of_address_to_resource(node, 0, &res) == 0) {
|
|
gic_dist_physaddr = res.start;
|
|
pr_info("GIC physical location is %#lx\n", gic_dist_physaddr);
|
|
}
|
|
}
|
|
|
|
#else
|
|
#define gic_init_physaddr(node) do { } while (0)
|
|
#endif
|
|
|
|
static int gic_irq_domain_map(struct irq_domain *d, unsigned int irq,
|
|
irq_hw_number_t hw)
|
|
{
|
|
if (hw < 32) {
|
|
irq_set_percpu_devid(irq);
|
|
irq_domain_set_info(d, irq, hw, &gic_chip, d->host_data,
|
|
handle_percpu_devid_irq, NULL, NULL);
|
|
set_irq_flags(irq, IRQF_VALID | IRQF_NOAUTOEN);
|
|
} else {
|
|
irq_domain_set_info(d, irq, hw, &gic_chip, d->host_data,
|
|
handle_fasteoi_irq, NULL, NULL);
|
|
set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static void gic_irq_domain_unmap(struct irq_domain *d, unsigned int irq)
|
|
{
|
|
}
|
|
|
|
static int gic_irq_domain_xlate(struct irq_domain *d,
|
|
struct device_node *controller,
|
|
const u32 *intspec, unsigned int intsize,
|
|
unsigned long *out_hwirq, unsigned int *out_type)
|
|
{
|
|
unsigned long ret = 0;
|
|
|
|
if (d->of_node != controller)
|
|
return -EINVAL;
|
|
if (intsize < 3)
|
|
return -EINVAL;
|
|
|
|
/* Get the interrupt number and add 16 to skip over SGIs */
|
|
*out_hwirq = intspec[1] + 16;
|
|
|
|
/* For SPIs, we need to add 16 more to get the GIC irq ID number */
|
|
if (!intspec[0])
|
|
*out_hwirq += 16;
|
|
|
|
*out_type = intspec[2] & IRQ_TYPE_SENSE_MASK;
|
|
|
|
return ret;
|
|
}
|
|
|
|
#ifdef CONFIG_SMP
|
|
static int gic_secondary_init(struct notifier_block *nfb, unsigned long action,
|
|
void *hcpu)
|
|
{
|
|
if (action == CPU_STARTING || action == CPU_STARTING_FROZEN)
|
|
gic_cpu_init(&gic_data[0]);
|
|
return NOTIFY_OK;
|
|
}
|
|
|
|
/*
|
|
* Notifier for enabling the GIC CPU interface. Set an arbitrarily high
|
|
* priority because the GIC needs to be up before the ARM generic timers.
|
|
*/
|
|
static struct notifier_block gic_cpu_notifier = {
|
|
.notifier_call = gic_secondary_init,
|
|
.priority = 100,
|
|
};
|
|
#endif
|
|
|
|
static int gic_irq_domain_alloc(struct irq_domain *domain, unsigned int virq,
|
|
unsigned int nr_irqs, void *arg)
|
|
{
|
|
int i, ret;
|
|
irq_hw_number_t hwirq;
|
|
unsigned int type = IRQ_TYPE_NONE;
|
|
struct of_phandle_args *irq_data = arg;
|
|
|
|
ret = gic_irq_domain_xlate(domain, irq_data->np, irq_data->args,
|
|
irq_data->args_count, &hwirq, &type);
|
|
if (ret)
|
|
return ret;
|
|
|
|
for (i = 0; i < nr_irqs; i++)
|
|
gic_irq_domain_map(domain, virq + i, hwirq + i);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct irq_domain_ops gic_irq_domain_hierarchy_ops = {
|
|
.xlate = gic_irq_domain_xlate,
|
|
.alloc = gic_irq_domain_alloc,
|
|
.free = irq_domain_free_irqs_top,
|
|
};
|
|
|
|
static const struct irq_domain_ops gic_irq_domain_ops = {
|
|
.map = gic_irq_domain_map,
|
|
.unmap = gic_irq_domain_unmap,
|
|
.xlate = gic_irq_domain_xlate,
|
|
};
|
|
|
|
void gic_set_irqchip_flags(unsigned long flags)
|
|
{
|
|
gic_chip.flags |= flags;
|
|
}
|
|
|
|
void __init gic_init_bases(unsigned int gic_nr, int irq_start,
|
|
void __iomem *dist_base, void __iomem *cpu_base,
|
|
u32 percpu_offset, struct device_node *node)
|
|
{
|
|
irq_hw_number_t hwirq_base;
|
|
struct gic_chip_data *gic;
|
|
int gic_irqs, irq_base, i;
|
|
|
|
BUG_ON(gic_nr >= MAX_GIC_NR);
|
|
|
|
gic = &gic_data[gic_nr];
|
|
#ifdef CONFIG_GIC_NON_BANKED
|
|
if (percpu_offset) { /* Frankein-GIC without banked registers... */
|
|
unsigned int cpu;
|
|
|
|
gic->dist_base.percpu_base = alloc_percpu(void __iomem *);
|
|
gic->cpu_base.percpu_base = alloc_percpu(void __iomem *);
|
|
if (WARN_ON(!gic->dist_base.percpu_base ||
|
|
!gic->cpu_base.percpu_base)) {
|
|
free_percpu(gic->dist_base.percpu_base);
|
|
free_percpu(gic->cpu_base.percpu_base);
|
|
return;
|
|
}
|
|
|
|
for_each_possible_cpu(cpu) {
|
|
u32 mpidr = cpu_logical_map(cpu);
|
|
u32 core_id = MPIDR_AFFINITY_LEVEL(mpidr, 0);
|
|
unsigned long offset = percpu_offset * core_id;
|
|
*per_cpu_ptr(gic->dist_base.percpu_base, cpu) = dist_base + offset;
|
|
*per_cpu_ptr(gic->cpu_base.percpu_base, cpu) = cpu_base + offset;
|
|
}
|
|
|
|
gic_set_base_accessor(gic, gic_get_percpu_base);
|
|
} else
|
|
#endif
|
|
{ /* Normal, sane GIC... */
|
|
WARN(percpu_offset,
|
|
"GIC_NON_BANKED not enabled, ignoring %08x offset!",
|
|
percpu_offset);
|
|
gic->dist_base.common_base = dist_base;
|
|
gic->cpu_base.common_base = cpu_base;
|
|
gic_set_base_accessor(gic, gic_get_common_base);
|
|
}
|
|
|
|
/*
|
|
* Initialize the CPU interface map to all CPUs.
|
|
* It will be refined as each CPU probes its ID.
|
|
*/
|
|
for (i = 0; i < NR_GIC_CPU_IF; i++)
|
|
gic_cpu_map[i] = 0xff;
|
|
|
|
/*
|
|
* Find out how many interrupts are supported.
|
|
* The GIC only supports up to 1020 interrupt sources.
|
|
*/
|
|
gic_irqs = readl_relaxed(gic_data_dist_base(gic) + GIC_DIST_CTR) & 0x1f;
|
|
gic_irqs = (gic_irqs + 1) * 32;
|
|
if (gic_irqs > 1020)
|
|
gic_irqs = 1020;
|
|
gic->gic_irqs = gic_irqs;
|
|
|
|
if (node) { /* DT case */
|
|
gic->domain = irq_domain_add_linear(node, gic_irqs,
|
|
&gic_irq_domain_hierarchy_ops,
|
|
gic);
|
|
} else { /* Non-DT case */
|
|
/*
|
|
* For primary GICs, skip over SGIs.
|
|
* For secondary GICs, skip over PPIs, too.
|
|
*/
|
|
if (gic_nr == 0 && (irq_start & 31) > 0) {
|
|
hwirq_base = 16;
|
|
if (irq_start != -1)
|
|
irq_start = (irq_start & ~31) + 16;
|
|
} else {
|
|
hwirq_base = 32;
|
|
}
|
|
|
|
gic_irqs -= hwirq_base; /* calculate # of irqs to allocate */
|
|
|
|
irq_base = irq_alloc_descs(irq_start, 16, gic_irqs,
|
|
numa_node_id());
|
|
if (IS_ERR_VALUE(irq_base)) {
|
|
WARN(1, "Cannot allocate irq_descs @ IRQ%d, assuming pre-allocated\n",
|
|
irq_start);
|
|
irq_base = irq_start;
|
|
}
|
|
|
|
gic->domain = irq_domain_add_legacy(node, gic_irqs, irq_base,
|
|
hwirq_base, &gic_irq_domain_ops, gic);
|
|
}
|
|
|
|
if (WARN_ON(!gic->domain))
|
|
return;
|
|
|
|
if (gic_nr == 0) {
|
|
#ifdef CONFIG_SMP
|
|
set_smp_cross_call(gic_raise_softirq);
|
|
register_cpu_notifier(&gic_cpu_notifier);
|
|
#endif
|
|
set_handle_irq(gic_handle_irq);
|
|
}
|
|
|
|
gic_dist_init(gic);
|
|
gic_cpu_init(gic);
|
|
gic_pm_init(gic);
|
|
}
|
|
|
|
#ifdef CONFIG_OF
|
|
static int gic_cnt __initdata;
|
|
|
|
static int __init
|
|
gic_of_init(struct device_node *node, struct device_node *parent)
|
|
{
|
|
void __iomem *cpu_base;
|
|
void __iomem *dist_base;
|
|
u32 percpu_offset;
|
|
int irq;
|
|
|
|
if (WARN_ON(!node))
|
|
return -ENODEV;
|
|
|
|
dist_base = of_iomap(node, 0);
|
|
WARN(!dist_base, "unable to map gic dist registers\n");
|
|
|
|
cpu_base = of_iomap(node, 1);
|
|
WARN(!cpu_base, "unable to map gic cpu registers\n");
|
|
|
|
if (of_property_read_u32(node, "cpu-offset", &percpu_offset))
|
|
percpu_offset = 0;
|
|
|
|
gic_init_bases(gic_cnt, -1, dist_base, cpu_base, percpu_offset, node);
|
|
if (!gic_cnt)
|
|
gic_init_physaddr(node);
|
|
|
|
if (parent) {
|
|
irq = irq_of_parse_and_map(node, 0);
|
|
gic_cascade_irq(gic_cnt, irq);
|
|
}
|
|
|
|
if (IS_ENABLED(CONFIG_ARM_GIC_V2M))
|
|
gicv2m_of_init(node, gic_data[gic_cnt].domain);
|
|
|
|
gic_cnt++;
|
|
return 0;
|
|
}
|
|
IRQCHIP_DECLARE(gic_400, "arm,gic-400", gic_of_init);
|
|
IRQCHIP_DECLARE(arm11mp_gic, "arm,arm11mp-gic", gic_of_init);
|
|
IRQCHIP_DECLARE(arm1176jzf_dc_gic, "arm,arm1176jzf-devchip-gic", gic_of_init);
|
|
IRQCHIP_DECLARE(cortex_a15_gic, "arm,cortex-a15-gic", gic_of_init);
|
|
IRQCHIP_DECLARE(cortex_a9_gic, "arm,cortex-a9-gic", gic_of_init);
|
|
IRQCHIP_DECLARE(cortex_a7_gic, "arm,cortex-a7-gic", gic_of_init);
|
|
IRQCHIP_DECLARE(msm_8660_qgic, "qcom,msm-8660-qgic", gic_of_init);
|
|
IRQCHIP_DECLARE(msm_qgic2, "qcom,msm-qgic2", gic_of_init);
|
|
|
|
#endif
|
|
|
|
#ifdef CONFIG_ACPI
|
|
static phys_addr_t dist_phy_base, cpu_phy_base __initdata;
|
|
|
|
static int __init
|
|
gic_acpi_parse_madt_cpu(struct acpi_subtable_header *header,
|
|
const unsigned long end)
|
|
{
|
|
struct acpi_madt_generic_interrupt *processor;
|
|
phys_addr_t gic_cpu_base;
|
|
static int cpu_base_assigned;
|
|
|
|
processor = (struct acpi_madt_generic_interrupt *)header;
|
|
|
|
if (BAD_MADT_ENTRY(processor, end))
|
|
return -EINVAL;
|
|
|
|
/*
|
|
* There is no support for non-banked GICv1/2 register in ACPI spec.
|
|
* All CPU interface addresses have to be the same.
|
|
*/
|
|
gic_cpu_base = processor->base_address;
|
|
if (cpu_base_assigned && gic_cpu_base != cpu_phy_base)
|
|
return -EINVAL;
|
|
|
|
cpu_phy_base = gic_cpu_base;
|
|
cpu_base_assigned = 1;
|
|
return 0;
|
|
}
|
|
|
|
static int __init
|
|
gic_acpi_parse_madt_distributor(struct acpi_subtable_header *header,
|
|
const unsigned long end)
|
|
{
|
|
struct acpi_madt_generic_distributor *dist;
|
|
|
|
dist = (struct acpi_madt_generic_distributor *)header;
|
|
|
|
if (BAD_MADT_ENTRY(dist, end))
|
|
return -EINVAL;
|
|
|
|
dist_phy_base = dist->base_address;
|
|
return 0;
|
|
}
|
|
|
|
int __init
|
|
gic_v2_acpi_init(struct acpi_table_header *table)
|
|
{
|
|
void __iomem *cpu_base, *dist_base;
|
|
int count;
|
|
|
|
/* Collect CPU base addresses */
|
|
count = acpi_parse_entries(ACPI_SIG_MADT,
|
|
sizeof(struct acpi_table_madt),
|
|
gic_acpi_parse_madt_cpu, table,
|
|
ACPI_MADT_TYPE_GENERIC_INTERRUPT, 0);
|
|
if (count <= 0) {
|
|
pr_err("No valid GICC entries exist\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/*
|
|
* Find distributor base address. We expect one distributor entry since
|
|
* ACPI 5.1 spec neither support multi-GIC instances nor GIC cascade.
|
|
*/
|
|
count = acpi_parse_entries(ACPI_SIG_MADT,
|
|
sizeof(struct acpi_table_madt),
|
|
gic_acpi_parse_madt_distributor, table,
|
|
ACPI_MADT_TYPE_GENERIC_DISTRIBUTOR, 0);
|
|
if (count <= 0) {
|
|
pr_err("No valid GICD entries exist\n");
|
|
return -EINVAL;
|
|
} else if (count > 1) {
|
|
pr_err("More than one GICD entry detected\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
cpu_base = ioremap(cpu_phy_base, ACPI_GIC_CPU_IF_MEM_SIZE);
|
|
if (!cpu_base) {
|
|
pr_err("Unable to map GICC registers\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
dist_base = ioremap(dist_phy_base, ACPI_GICV2_DIST_MEM_SIZE);
|
|
if (!dist_base) {
|
|
pr_err("Unable to map GICD registers\n");
|
|
iounmap(cpu_base);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
/*
|
|
* Initialize zero GIC instance (no multi-GIC support). Also, set GIC
|
|
* as default IRQ domain to allow for GSI registration and GSI to IRQ
|
|
* number translation (see acpi_register_gsi() and acpi_gsi_to_irq()).
|
|
*/
|
|
gic_init_bases(0, -1, dist_base, cpu_base, 0, NULL);
|
|
irq_set_default_host(gic_data[0].domain);
|
|
|
|
acpi_irq_model = ACPI_IRQ_MODEL_GIC;
|
|
return 0;
|
|
}
|
|
#endif
|